Commit Graph

4635 Commits

Author SHA1 Message Date
Jon Loeliger
aa3511e422 FSL: Move board/mpc8266ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:40 +01:00
Jon Loeliger
7f1d846e5c FSL: Move board/mpc7448hpc2 under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:36 +01:00
Jon Loeliger
b7e24d283e FSL: Move board/mpc8260ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:00 +01:00
goda.yusuke
6a8a5dc475 net: Add support AX88796L ethernet device
AX88796L is device of NE2000 compatible.
This patch support AX88796L ethernet device.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-25 22:55:15 +01:00
Wolfgang Denk
e0a6140dd3 ne2000 driver: change #ifdef to Makefile conditional compilation
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-25 22:50:41 +01:00
goda.yusuke
e710185aae net: Divided code of NE2000 ethernet driver
There are more devices of the NE2000 base.
A present code is difficult for us to support more devices.
To support more NE2000 clone devices, separated the function.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-25 22:48:58 +01:00
Mike Frysinger
395bce4f59 net/Blackfin: move on-chip MAC driver into drivers/net/
The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
directory, but it is not board specific, so relocate it to the drivers dir
so that other Blackfin ports can utilize it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-25 22:35:26 +01:00
Mike Frysinger
8a30b47009 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
Since the "ssync" instruction may have hardware anomalies associated with
it, have the smc91111 driver use the SSYNC macro rather than invoking it
directly.  We workaround all the anomalies via this macro.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-25 22:32:25 +01:00
Bryan O'Donoghue
77ff7b7444 8xx: Update OF support on 8xx
This patch does some shifting around of OF support on 8xx.

Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
2008-03-25 22:28:34 +01:00
Kumar Gala
9c666a7db0 ppc: Allow boards to specify how much memory they can map
For historical reasons we limited the stack to 256M because some boards
could only map that much via BATS.  However newer boards are capable of
mapping more memory (for example 85xx is capble of doing up to 2G).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-25 22:26:11 +01:00
Bryan O'Donoghue
a6f5f317cd 8xx : Add OF support to Adder875 board port - resubmit
Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
2008-03-25 22:20:36 +01:00
Kumar Gala
d058698fd2 Add setexpr command
Add a simple expr style command that will set an env variable as the result
of the command.  This allows us to do simple math in shell.  The following
operations are supported: &, |, ^, +, -, *, /.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-25 22:16:15 +01:00
Jon Loeliger
3f105faa64 FSL: Move board/mpc7448hpc2 under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 09:51:43 -05:00
Jon Loeliger
449c703374 FSL: Move board/mpc8266ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 09:51:43 -05:00
Jon Loeliger
5863577989 FSL: Move board/mpc8260ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 09:51:43 -05:00
Shinya Kuribayashi
8a77398395 [MIPS] Move gth2_config from ARM section to MIPS
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:08 +09:00
Shinya Kuribayashi
373b16fc0c [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:07 +09:00
Shinya Kuribayashi
d98e348e2e [MIPS] Fix dcache_status()
You can't judge UNCACHED by Config.K0 LSB.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:07 +09:00
Shinya Kuribayashi
b0c66af53e [MIPS] Introduce _machine_restart
Handles machine specific functions by using weak functions.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:07 +09:00
Shinya Kuribayashi
decaba6f5c [MIPS] Cleanup CP0 Status initialization
Add setup_c0_status from Linux. For the moment we disable interrupts, set
CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
reset-time configuration and will work well across most processors.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:07 +09:00
Shinya Kuribayashi
d43d43ef28 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
Without this change, we'll be suffering from deffered WATCH exception
once Status.EXL is cleared. Make sure Cause.WP is cleared.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:07 +09:00
Shinya Kuribayashi
2613862323 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
Move things to appropriate place.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:07 +09:00
Shinya Kuribayashi
ccf8f824ef [MIPS] Implement flush_cache()
We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
function is used not only in U-Boot specfic programs but also at loading
target binaries.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:06 +09:00
Shinya Kuribayashi
2e0e5271aa [MIPS] Fix I-/D-cache initialization loops
Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
again per a loop for I-cache initialization. But according to 'See MIPS
Run', we're encouraged to use three separate loops rather than combining
them *for both I- and D-cache*. This patch tries to fix this.

In accordance with fixing above, mips_init_[id]cache are separated from
mips_cache_reset(), and rewrite cache loops are completely rewritten with
useful macros.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:06 +09:00
Shinya Kuribayashi
1898840797 [MIPS] Replace memory clearance code with f_fill64
This routine fills memory with zero by 64 bytes, and is 64-bit capable.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:06 +09:00
Shinya Kuribayashi
2f5d414ccb [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
This patch replaces the current function definitions with NESTED, LEAF
and END macro. They specify some more additional information about the
function; an alignment of symbol, type of symbol, stack frame usage, etc.
These information explicitly tells the assembler and the debugger about
the types of code we want to generate.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:06 +09:00
Shinya Kuribayashi
282223a607 [MIPS] asm headers' updates
Make some asm headers adjusted to the latest Linux kernel.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 11:43:17 +09:00
Shinya Kuribayashi
e1390801a3 [MIPS] Request for the 'mips_cache_lock()' removal
The initial intension of having mips_cache_lock() was to use the cache
as memory for temporary stack use so that a C environment can be set up
as early as possible.

But now mips_cache_lock() follow lowlevel_init(). We've already have the
real memory initilaized at this point, therefore we could/should use it.
No reason to lock at all.

Other problems:

Cache locking is not consistent across MIPS implementaions. Some imple-
mentations don't support locking at all. The style of locking varies -
some support per line locking, others per way, etc. Some parts use bits
in status registers instead of cache ops. Current mips_cache_lock() is
not necessarily general-purpose.

And this is worthy of special mention; once U-Boot/MIPS locks the lines,
they are never get unlocked, so the code relies on whatever gets loaded
after U-Boot to re-initialize the cache and clear the locks. We're sup-
posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
but leave the situation as it is for a long time.

For these reasons, I proposed the removal of mips_cache_lock() from the
global start-up code.

This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
*things have changed*. If he wants the same behavior as before, he needs
to have CFG_INIT_RAM_LOCK_MIPS in his config file.

If we don't have any regression report through several releases, then
we'll remove codes entirely.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Acked-by: Andrew Dyer <amdyer@gmail.com>
2008-03-25 11:39:29 +09:00
Yuri Tikhonov
0d48926c87 lwmon5 SYSMON POST: fix backlight control
If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
run on the board, then the SYSMON POST controls the display backlight
(doesn't switch backlight ON if POST FAILED, and does switch the
backlight ON if PASSED).

If not, then the video driver controls the display backlight (just
switch ON the backlight upon initialization).

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-25 00:16:14 +01:00
Yuri Tikhonov
ff2bdfb2c1 lwmon5 SYSMON POST: fix handling of negative temperatures
Fix errors in the LWMON5 Sysmon POST for negative temperatures.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-25 00:14:46 +01:00
Wolfgang Denk
b38d7fc2f1 Merge branch 'master' of /home/wd/git/u-boot/master/ 2008-03-25 00:12:54 +01:00
Nobuhiro Iwamatsu
55774b512f pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
In current source code, when the device number of PCI is 0, process PCI
bridge without fail. However, when the device number is 0, it is not PCI
always bridge. There are times when device of PCI allocates.

When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
use this patch.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Stefan Roese <sr@denx.de>
2008-03-23 01:38:22 +01:00
Wolfgang Denk
47310715f4 Merge branch 'master' of git://www.denx.de/git/u-boot-tq-group 2008-03-23 00:57:40 +01:00
Wolfgang Denk
e334e05ba0 Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash 2008-03-23 00:53:43 +01:00
Wolfgang Denk
161efeb011 Merge branch 'master' of git://www.denx.de/git/u-boot-fdt 2008-03-23 00:52:58 +01:00
Wolfgang Denk
6887cb6817 Merge branch 'master' of /home/wd/git/u-boot/work 2008-03-22 23:27:43 +01:00
Yuri Tikhonov
86aea3eaef LWMON5: fix dsPIC POST
Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
2008-03-22 23:26:08 +01:00
Gerald Van Baren
01026a6e61 Merge git://www.denx.de/git/u-boot into uboot 2008-03-21 11:58:22 -04:00
Bartlomiej Sieka
388b82fddc [new uImage] Enable new uImage support for the pcs440ep board.
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:23:13 +01:00
Bartlomiej Sieka
95f4ec2b9c [new uImage] Do not compile new uImage format support by default
Disable default building of new uImage format support in preparation
for merge with the master. Support for new format can be enabled on
a per-board basis, by defining the following in the board's config file:

#define CONFIG_FIT             1
#define CONFIG_OF_LIBFDT       1

This can be optionally defined to give more verbose output:

#define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:23:13 +01:00
Bartlomiej Sieka
dafaede8a4 [new uImage] Disable debuging output in preparation for merge with master
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:20:31 +01:00
Bartlomiej Sieka
fbe7a15502 [new uImage] Compilation and new uImage handling fixes for imxtract
Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
include/config_cmd_default.h. Fix few warnings and handling of new format
images.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:20:31 +01:00
Bartlomiej Sieka
36cc8cbb33 [new uImage] Fix autoscr command used with new uImage format
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:10:19 +01:00
Bartlomiej Sieka
43142e817f [new uImage] Fix *.its files location in documentation
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:10:19 +01:00
Wolfgang Denk
81a0ac62ea lwmon5 POST: remove unreachable code
plus some coding style cleanup

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-20 22:01:38 +01:00
Yuri Tikhonov
b73a19e160 LWMON5: POST RTC fix
Modify the RTC API to provide one a status for the time reported by
the rtc_get() function:
  0 - a reliable time is guaranteed,
< 0 - a reliable time isn't guaranteed (power fault, clock issues,
      and so on).

The RTC chip drivers are responsible for providing this info if the
corresponding chip supports such functionality. If not - always
report that the time is reliable.

The POST RTC test was modified to detect the RTC faults utilizing
this new rtc_get() feature.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-20 21:48:46 +01:00
Martin Krause
a5cc5555cc TQM5200B: update MTD partition layout
- insert partition for dtb blob to TQM5200B MTD layout
- set env variables dependent on the configured board
  (TQM5200 or TQM5200B)

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2008-03-19 14:33:17 +01:00
Stefan Roese
f0105727d1 CFI: Small cleanup for FLASH_SHOW_PROGRESS
With this patch we don't need that many #ifdef's in the code. It moves
the subtraction into the macro and defines a NOP-macro when
CONFIG_FLASH_SHOW_PROGRESS is not defined.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2008-03-19 13:41:25 +01:00
Jerry Van Baren
9a042e9ca5 Flash programming progress countdown.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-03-19 13:41:25 +01:00
Bartlomiej Sieka
5e339fd9ed [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-19 10:00:06 +01:00