Commit Graph

24 Commits

Author SHA1 Message Date
Marian Balakowicz
3bab76a26e Delay FIT format check on sector based devices
Global FIT image operations like format check cannot be performed on
a first sector data, defer them to the point when whole FIT image was
uploaded to a system RAM.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
2008-06-30 22:52:43 +02:00
Marian Balakowicz
1372cce2b9 [new uImage] Use show_boot_progress() for new uImage format
This patch allocates a set of show_boot_progress() IDs for new uImage format
and adds show_boot_progress() calls in new uImage format handling code.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:33:01 +01:00
Marian Balakowicz
09475f7527 [new uImage] Add new uImage format handling to other bootm related commands
Updated commands:

docboot  - cmd_doc.c
fdcboot  - cmd_fdc.c
diskboot - cmd_ide.c
nboot    - cmd_nand.c
scsiboot - cmd_scsi.c
usbboot  - cmd_usb.c

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:33:01 +01:00
Marian Balakowicz
9a4daad0a3 [new uImage] Update naming convention for bootm/uImage related code
This patch introduces the following prefix convention for the
image format handling and bootm related code:

genimg_		- dual format shared code
image_		- legacy uImage format specific code
fit_		- new uImage format specific code
boot_		- booting process related code

Related routines are renamed and a few pieces of code are moved around and
re-grouped.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 14:58:34 +01:00
Marian Balakowicz
d5934ad775 [new uImage] Add dual format uImage support framework
This patch adds framework for dual format images. Format detection is added
and the bootm controll flow is updated to include cases for new FIT format
uImages.

When the legacy (image_header based) format is detected appropriate
legacy specific handling is invoked. For the new (FIT based) format uImages
dual boot framework has a minial support, that will only print out a
corresponding debug messages. Implementation of the FIT specific handling will
be added in following patches.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-25 15:53:49 +01:00
Marian Balakowicz
2242f53698 [new uImage] Rename and move print_image_hdr() routine
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:27:41 +01:00
Marian Balakowicz
b97a2a0a21 [new uImage] Define a API for image handling operations
- Add inline helper macros for basic header processing
- Move common non inline code common/image.c
- Replace direct header access with the API routines
- Rename IH_CPU_* to IH_ARCH_*

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:53 +01:00
Grant Likely
4a43719a77 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
Modify common/Makefile to conditionally compile the cmd_*.c files based
on the board config.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-20 22:33:54 -07:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Andy Fleming
6bf6f114dc Merge branch 'testing' into working
Conflicts:

	CHANGELOG
	fs/fat/fat.c
	include/configs/MPC8560ADS.h
	include/configs/pcs440ep.h
	net/eth.c
2007-08-03 02:23:23 -05:00
Heiko Schocher
fad6340715 make show_boot_progress () weak.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-13 09:54:17 +02:00
Jon Loeliger
baa26db411 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-08 17:55:57 -05:00
Jon Loeliger
a76adc8142 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:23:08 +02:00
Heiko Schocher
566a494f59 [PCS440EP] upgrade the PCS440EP board:
- Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-22 19:11:54 +02:00
Marian Balakowicz
2fc000d756 Remove dependencies between DoC code and old legacy NAND driver.
Necessary defines and data structures were copied to DoC specific files
so that legacy NAND code could be entirely removed from u-boot tree
in the near future.
2006-04-05 20:46:41 +02:00
Wolfgang Denk
dc013d4640 Add loads of ntohl() in image header handling
Patch by Steven Scholz, 10 Jun 2005
2006-03-12 01:59:35 +01:00
Bartlomiej Sieka
addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
wdenk
7205e4075d * Patches by Denis Peter, 9 Sep 2003:
add FAT support for IDE, SCSI and USB

* Patches by Gleb Natapov, 2 Sep 2003:
  - cleanup of POST code for unsupported architectures
  - MPC824x locks way0 of data cache for use as initial RAM;
    this patch unlocks it after relocation to RAM and invalidates
    the locked entries.

* Patch by Gleb Natapov, 30 Aug 2003:
  new I2C driver for mpc107 bridge. Now works from flash.

* Patch by Dave Ellis, 11 Aug 2003:
  - JFFS2: fix typo in common/cmd_jffs2.c
  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
  - JFFS2: remove node version 0 warning
  - JFFS2: accept JFFS2 PADDING nodes
  - SXNI855T: add AM29LV800 support
  - SXNI855T: move environment from EEPROM to flash
  - SXNI855T: boot from JFFS2 in NOR or NAND flash

* Patch by Bill Hargen, 11 Aug 2003:
  fixes for I2C on MPC8240
  - fix i2c_write routine
  - fix iprobe command
  - eliminates use of global variables, plus dead code, cleanup.
2003-09-10 22:30:53 +00:00
wdenk
7152b1d0b3 * Add support for SK98xx driver
* Add PCI support for SL8245 board

* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly

* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
  to allow for more accurate baudrate settings
  (error now 0.7% at 115 kbps, instead of 3.5% before)

* Patch by Andreas Mohr, 4 Sep 2003:
  Fix a lot of spelling errors
2003-09-05 23:19:14 +00:00
wdenk
0d4983930a Patch by Kenneth Johansson, 30 Jun 2003:
get rid of MK_CMD_ENTRY macro; update doc/README.command
2003-07-01 21:06:45 +00:00
wdenk
8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00
wdenk
ac6dbb85b7 Make compile clean, fix the usual small problems. 2003-03-26 11:42:53 +00:00
wdenk
c609719b8d Initial revision 2002-11-03 00:24:07 +00:00