Commit Graph

198 Commits

Author SHA1 Message Date
Alex Deymo
88b6329cce disk: Return the partition number in part_get_info_by_name()
Similar to what blk_get_device_part_str() does, this patch makes
part_get_info_by_name() return the partition number in case of a match.
This is useful when the partition number is needed and not just the
descriptor.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:37 -04:00
Tom Rini
936478e797 SPARC: Remove
The SPARC architecture is currently unmaintained, remove.

Cc: Francois Retief <fgretief@spaceteq.co.za>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05 13:52:20 -04:00
Philipp Tomsich
02e43537b3 part_efi: support padding between the GPT header and partition entries
Some architectures require their SPL loader at a fixed address within
the first 16KB of the disk. To avoid an overlap with the partition
entries of the EFI partition table, the first safe offset (in bytes,
from the start of the device) for the entries can be set through
CONFIG_EFI_PARTITION_ENTRIES_OFF (via Kconfig)

When formatting a device with an EFI partition table, we may need to
leave a gap between the GPT header (always in LBA 1) and the partition
entries. The GPT header already contains a field to specify the
on-disk location, which has so far always been set to LBA 2. With this
change, a configurable offset will be translated into a LBA address
indicating where to put the entries.

Now also allows an override via device-tree using a config-node (see
doc/device-tree-bindings/config.txt for documentation).

Tested (exporting an internal MMC formatted with this) against Linux,
MacOS X and Windows.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: __maybe_unused on config_offset to avoid warning]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-20 18:04:18 -04:00
Vincent Tinelli
9da52f8f67 gpt: Fix uuid string format
Change GPT UUID string format from UUID to GUID per specification.

Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17 14:15:10 -04:00
Dalon Westergreen
f0fb4fa7d5 SPL: add support to boot from a partition type
the socfpga bootrom supports mmc booting from either a raw image
starting at 0x0, or from a partition of type 0xa2.  This patch
adds support for locating the boot image in the first type 0xa2
partition found.

Assigned a partition number of -1 will cause a search for a
partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
and use it to find the u-boot image

Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-17 14:15:14 -05:00
Vincent Tinelli
e163a931af cmd: gpt: backup boot code before writing MBR
On some cases the first 440 bytes of MBR are used to keep an additional
information for ROM boot loader. 'gpt write' command doesn't preserve
that area and makes boot code gone.

Preserve boot code area when run 'gpt write' command.

Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com>
Signed-off-by: Brennan Ashton <brn@deako.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08 15:56:29 -05:00
Patrick Delaunay
aed8fdaae9 disk: convert CONFIG_PARTITION_TYPE_GUID to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:48:04 -05:00
Patrick Delaunay
b331cd6204 cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT
We convert CONFIG_PARTITION_UUIDS to Kconfig first.  But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28 08:48:03 -05:00
Patrick Delaunay
bd42a94268 disk: convert CONFIG_EFI_PARTITION to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:47:42 -05:00
Patrick Delaunay
863c5b6cdd disk: convert CONFIG_AMIGA_PARTITION to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:47:36 -05:00
Patrick Delaunay
1acc008787 disk: convert CONFIG_ISO_PARTITION to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:47:35 -05:00
Patrick Delaunay
b0cf733933 disk: convert CONFIG_DOS_PARTITION to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:47:34 -05:00
Patrick Delaunay
f18fa31cdc disk: convert CONFIG_MAC_PARTITION to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:47:31 -05:00
Patrick Delaunay
e274ef6b57 disk: convert CONFIG_PARTITIONS to Kconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28 08:47:30 -05:00
Jean-Jacques Hiblot
139f7b1ded disk: Fixed capacity message
With capacities getting bigger, we can see see messages with negative
numbers like "Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)".
Here the printed LBA is -387938128 when it should have been 3907029168.
To fix this, use the right format when displaying the unsigned integers.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reported-by: Yan Liu <yan-liu@ti.com>
2016-12-27 11:24:18 -05:00
Petr Kulhavy
da2ee24d91 disk: part: refactor generic name creation for DOS and ISO
In both DOS and ISO partition tables the same code to create partition name
like "hda1" was repeated.

Code moved to into a new function part_set_generic_name() in part.c and optimized.
Added recognition of MMC and SD types, name is like "mmcsda1".

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-01 20:04:56 -04:00
Petr Kulhavy
b6dd69a4d6 fastboot: add support for writing MBR
Add special target "mbr" (otherwise configurable via CONFIG_FASTBOOT_MBR_NAME)
to write MBR partition table.
Partitions are now searched using the generic function which finds any
partiiton by name. For MBR the partition names hda1, sda1, etc. are used.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-01 20:04:51 -04:00
Petr Kulhavy
87b8530fe2 disk: part: implement generic function part_get_info_by_name()
So far partition search by name has been supported only on the EFI partition
table. This patch extends the search to all partition tables.

Rename part_get_info_efi_by_name() to part_get_info_by_name(), move it from
part_efi.c into part.c and make it a generic function which traverses all part
drivers and searches all partitions (in the order given by the linked list).

For this a new variable struct part_driver.max_entries is added, which limits
the number of partitions searched. For EFI this was GPT_ENTRY_NUMBERS.
Similarly the limit is defined for DOS, ISO, MAC and AMIGA partition tables.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
2016-10-01 20:04:45 -04:00
Kever Yang
c2fdd34569 cmd: gpt: fix the wrong size parse for the last partition
The calculation of "dev_desc->lba - 34  - 1 - offset" is not correct for
size '-', because both fist_usable_lba and last_usable_lba will remain
34 sectors.

We can simply use 0 for size '-' because the part_efi module will decode
the size and auto extend the size to maximum available size.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-08-05 20:55:16 -04:00
Simon Glass
5afb8d151f part_efi: Fix compiler warning on 32-bit sandbox
This fixes a mismatch between the %zu format and the type used on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-25 12:05:54 -04:00
Alexander Graf
28f0014bde iso: Fix part info command
Partitions on the iso el torito partition table interpreter
only start from partition 1. So when printing out the tables,
let's also start counting at 1.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-07-22 14:46:19 -04:00
Patrick Delaunay
a565386762 disk: part_efi: fix check of the max partition size
the last value acceptable value for offset is last_usable_lba + 1
and not last_usable_lba - 1

issue found with SDCARD partition commands on u-boot 2015.10
but this part of code don't change

1- create GPT partion on all the card
  > gpt write mmc 0 name=test,start=0,size=0
  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fde       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     b710eb04-45b9-e94a-8d0b-21458d596f54

=> Start = 0x22*512 = 0x4400
=> Size = (0x003a9fde-0x22+1) * 512  = 0x753F7A00

2- try to recreate the same partition with the next command
   (block size:512 bytes = 0x200)

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7A00
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7800
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7600
    Writing GPT: success!

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fdc       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     36ec30ef-7ca4-cd48-97cd-ea9fb95185d0

the max LBA when the size is indicated (0x003a9fdc) is lower than
when u-boot compute the max allowed value with size=0 (0x003a9fde)

in the code :

     /* partition ending lba */
     if ((i == parts - 1) && (partitions[i].size == 0))
		/* extend the last partition to maximuim */
		gpt_e[i].ending_lba = gpt_h->last_usable_lba;
     else
		gpt_e[i].ending_lba = cpu_to_le64(offset - 1);

so offset = gpt_h->last_usable_lba + 1 is acceptable !
but the test (offset >= last_usable_lba) cause the error

END

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>disk: part_efi: fix check of the max partition size
the last value acceptable value for offset is (last_usable_lba + 1)
and not (last_usable_lba - 1)

issue found with SDCARD partition commands on u-boot 2015.10
but this part of code don't change

1- I create GPT partion on all the card (start and size undefined)

  > gpt write mmc 0 name=test,start=0,size=0
  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fde       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     b710eb04-45b9-e94a-8d0b-21458d596f54

=> Start = 0x22*512 = 0x4400
=> Size = (0x003a9fde-0x22+1) * 512  = 0x753F7A00

2- I try to recreate the same partition with the command gpt write
   and with start and size values (block size:512 bytes = 0x200)

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7A00
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7800
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7600
    Writing GPT: success!

  I check the partition created :

  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fdc       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     36ec30ef-7ca4-cd48-97cd-ea9fb95185d0

=> but the max LBA when the size is indicated (0x003a9fdc) is lower than
   when u-boot compute the max allowed value with size=0 (0x003a9fde)

3- in the code, just after my patch, line 446

     /* partition ending lba */
     if ((i == parts - 1) && (partitions[i].size == 0))
		/* extend the last partition to maximuim */
		gpt_e[i].ending_lba = gpt_h->last_usable_lba;
     else
		gpt_e[i].ending_lba = cpu_to_le64(offset - 1);

  so offset = gpt_h->last_usable_lba + 1 is acceptable !
  (it the value used when size is 0)

  but today the test (offset >= last_usable_lba) cause the error
  my patch only solve this issue

END

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2016-05-27 10:01:07 -04:00
Simon Glass
1598dfcb10 dm: blk: Use the correct error code for blk_get_device_by_str()
Return -EINVAL instead of -1 in this function, to provide a more meaningful
error.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
6dd9faf8f9 dm: part: Drop the block_drvr table
This is not needed since we can use the functions provided by the legacy
block device support.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
1fde473da7 dm: part: Use the legacy block driver for hardware partition support
Drop use of the table in part.c for this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
f1d86fd3b1 dm: sandbox: Drop the host_get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
f6d000edbe dm: systemace: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
4e7189d4d8 dm: sata: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

We cannot yet make sata_dev_desc[] private to common/sata.c as it is used by
the SATA drivers. This will require the SATA interface to be reworked.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
edd82ab354 dm: scsi: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
3c457f4d2e dm: mmc: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
74001a2570 dm: ide: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
57ebf67bad dm: usb: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
a6331fa83c dm: disk: Use legacy block driver info for block device access
Instead of calling xx_get_dev() functions for each interface type, use the
new legacy block driver which can provide the device through its interface.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
c649e3c91c dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI
This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Alexander Graf
a2adb173ec iso: Allow 512 byte sector size
Real CD-ROMs are pretty obsolete these days. Usually people still keep
iso files around, but just put them on USB sticks or SD cards and expect
them to "just work".

To support this use case with El Torito images, add support for 512 byte
sector size to the iso parsing code.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:35 -04:00
Alexander Graf
2579c67478 iso: Start with partition 1
The generic partition code treats partition 0 as "whole disk". So
we should start with partition 1 as the first partition in the iso
partition table.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:34 -04:00
Alexander Graf
ef9e6de540 iso: Make little endian and 64bit safe
The iso partition table implementation has a few endian and 64bit
problems. Clean it up a bit to become endian and bitness safe.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:33 -04:00
Nishanth Menon
2ae67aec5e dm: part: fix missing driver name in debug print
Fixes the following warning with PART_DEBUG enabled:
disk/part.c: In function ‘get_partition_info’:
disk/part.c:372:3: warning: format ‘%s’ expects a matching ‘char *’ argument [-Wformat]

Signed-off-by: Nishanth Menon <nm@ti.com>
2016-04-14 11:51:39 -06:00
Eric Nelson
e40cf34a29 drivers: block: add block device cache
Add a block device cache to speed up repeated reads of block devices by
various filesystems.

This small amount of cache can dramatically speed up filesystem
operations by skipping repeated reads of common areas of a block
device (typically directory structures).

This has shown to have some benefit on FAT filesystem operations of
loading a kernel and RAM disk, but more dramatic benefits on ext4
filesystems when the kernel and/or RAM disk are spread across
multiple extent header structures as described in commit fc0fc50.

The cache is implemented through a minimal list (block_cache) maintained
in most-recently-used order and count of the current number of entries
(cache_count). It uses a maximum block count setting to prevent copies
of large block reads and an upper bound on the number of cached areas.

The maximum number of entries in the cache defaults to 32 and the maximum
number of blocks per cache entry has a default of 2, which has shown to
produce the best results on testing of ext4 and FAT filesystems.

The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows
changing these values and can be used to tune for a particular filesystem
layout.

Signed-off-by: Eric Nelson <eric@nelint.com>
2016-04-01 17:18:27 -04:00
Simon Glass
4708a07c7c part_efi: Drop NULL check in part_get_info_efi()
This cannot be NULL since part_get_info() calls this function and requires
it to be non-NULL.

Reported-by: Coverity (CID: 138497)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:19 -04:00
Simon Glass
5f095f0c7a part_efi: Drop the NULL check on dev_desc in part_print_efi()
This cannot be NULL since part_print() calls this function and requires it
to be non-NULL.

Reported-by: Coverity (CID: 138498)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:19 -04:00
Simon Glass
0919228cf4 part_iso: Drop the customer unaligned access functions
One of these is causing a coverity warning. Drop these functions and use the
standard U-Boot ones instead.

Reported-by: Coverity (CID: 138499)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:18 -04:00
Alexander Graf
d96a98045a disk/part.c: Expose list of available block drivers
We have a pretty nice and generic interface to ask for a specific block
device. However, that one is still based around the magic notion that
we know the driver name.

In order to be able to write fully generic disk access code, expose the
currently internal list to other source files so that they can scan through
all available block drivers.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-03-15 15:19:22 -04:00
Simon Glass
084bf4c244 part: Rename test_part_xx() and print_part_xx()
Rename these functions so that part_ is at the start. This more clearly
identifies these functions as partition functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 15:34:50 -06:00
Simon Glass
2a981dc2c6 dm: block: Adjust device calls to go through helpers function
To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.

Use inline functions to avoid increasing code size on some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
bcce53d048 dm: block: Rename device number member dev to devnum
This is a device number, and we want to use 'dev' to mean a driver model
device. Rename the member.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
3e8bd46950 dm: part: Rename some partition functions
Rename three partition functions so that they start with part_. This makes
it clear what they relate to.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
96e5b03c8a dm: part: Convert partition API use to linker lists
We can use linker lists instead of explicitly declaring each function.
This makes the code shorter by avoiding switch() statements and lots of
header file declarations.

While this does clean up the code it introduces a few code issues with SPL.
SPL never needs to print partition information since this all happens from
commands. SPL mostly doesn't need to obtain information about a partition
either, except in a few cases. Add these cases so that the code will be
dropped from each partition driver when not needed. This avoids code bloat.

I think this is still a win, since it is not a bad thing to be explicit
about which features are used in SPL. But others may like to weigh in.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
95a6f9dfcb dm: part: Add a cast to avoid a compiler warning
In part_amiga.c the name is unsigned but bcpl_strcpy() requires a signed
pointer. Add a cast to fix the warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
e35929e4a1 dm: blk: Rename get_device_and_partition()
Rename this function to blk_get_device_part_str(). This is a better name
because it makes it clear that the function returns a block device and
parses a string.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00