Commit Graph

50 Commits

Author SHA1 Message Date
Selvamuthukumar
9b827cf172 Align end of bss by 4 bytes
Most of the bss initialization loop increments 4 bytes
at a time. And the loop end is checked for an 'equal'
condition. Make the bss end address aligned by 4, so
that the loop will end as expected.

Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-18 23:13:16 +01:00
Andy Fleming
20d04774f4 Consolidate MAX/MIN definitions
There were several, now there is one (two if you count the lower-case
versions).

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-11-02 16:23:46 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Scott Wood
6644641d07 delta, zylonite: Update nand_oobinfo to nand_ecclayout.
This is part of the switch to newer upstream MTD code.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-09-10 11:48:49 -05:00
Jean-Christophe PLAGNIOL-VILLARD
cc4a0ceeac drivers/mtd/nand: Move conditional compilation to Makefile
rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:43 +02:00
William Juul
5e1dae5c3d Fixing coding style issues
- Fixing leading white spaces
 - Fixing indentation where 4 spaces are used instead of tab
 - Removing C++ comments (//), wherever I introduced them

Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-08-12 11:31:17 -05:00
William Juul
cfa460adfd Update MTD to that of Linux 2.6.22.1
A lot changed in the Linux MTD code, since it was last ported from
Linux to U-Boot. This patch takes U-Boot NAND support to the level
of Linux 2.6.22.1 and will enable support for very large NAND devices
(4KB pages) and ease the compatibility between U-Boot and Linux
filesystems.

This patch is tested on two custom boards with PPC and ARM
processors running YAFFS in U-Boot and Linux using gcc-4.1.2
cross compilers.

MAKEALL ppc/arm has some issues:
 * DOC/OneNand/nand_spl is not building (I have not tried porting
   these parts, and since I do not have any HW and I am not familiar
   with this code/HW I think its best left to someone else.)

Except for the issues mentioned above, I have ported all drivers
necessary to run MAKEALL ppc/arm without errors and warnings. Many
drivers were trivial to port, but some were not so trivial. The
following drivers must be examined carefully and maybe rewritten to
some degree:
 cpu/ppc4xx/ndfc.c
 cpu/arm926ejs/davinci/nand.c
 board/delta/nand.c
 board/zylonite/nand.c

Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-08-12 11:31:15 -05:00
Jean-Christophe PLAGNIOL-VILLARD
0a5676befb Fix some more printf() format issues.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-13 16:55:00 +02:00
Wolfgang Denk
c8a3b109f0 Cleanup out-or-tree building for some boards (.depend)
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-02 23:49:18 +02:00
Wolfgang Denk
64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
Markus Klotzbuecher
78549bbf44 Merge with git://www.denx.de/git/u-boot.git 2007-08-07 22:30:29 +02:00
Jon Loeliger
b9307262f8 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:48:04 -05:00
Jon Loeliger
5e378003d5 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:34:58 +02:00
Markus Klotzbuecher
f2b07ebd32 Merge with git://www.denx.de/git/u-boot.git#testing-USB 2007-03-23 09:52:17 +01:00
Heiko Schocher
fa23044564 Added support for the TQM8272 board from TQ
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-12-21 17:17:02 +01:00
Wolfgang Denk
d3c5e8b2f5 Merge with /home/wd/git/u-boot/master 2006-11-27 16:13:00 +01:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Markus Klotzbuecher
24e37645e7 More cleanup for the delta board and the generic usb_ohci driver. Added
CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
initialization and cleanup hooks respectively.
2006-05-23 10:33:11 +02:00
Markus Klotzbuecher
3e326ece9e This patch adds USB storage support for the delta board. This is the first
board to make use of a generic OHCI driver, that calls hooks for board
dependant initialization.
2006-05-22 16:33:54 +02:00
Markus Klotzbuecher
71ae411a63 delta board: support for magic key detection and handling. 2006-04-25 10:03:01 +02:00
Wolfgang Denk
b28a31ca02 Merge with /home/m8/git/u-boot 2006-04-12 12:26:32 +02:00
Marian Balakowicz
6db3970811 Fix JFFS2 support for legacy NAND driver.
Some more NAND cleanup and small fixes.
2006-04-08 19:08:06 +02:00
Wolfgang Denk
534ff676a9 * Add support for ymodem protocol download
Patch by Stefano Babic, 29 Mar 2006

* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000

Merge with /home/mk/8-benq/u-boot
2006-04-01 15:52:46 +02:00
Wolfgang Denk
d87080b721 GCC-4.x fixes: clean up global data pointer initialization for all boards. 2006-03-31 18:32:53 +02:00
Markus Klotzbuecher
9e7b5ce61b delta board: one more DA9030 fix. 2006-03-30 17:00:39 +02:00
Markus Klotzbuecher
eeaab720f6 Change delta board memory map to start at 0x80000000. 2006-03-29 17:59:20 +02:00
Markus Klotzbuecher
89f2dfa4c3 delta board: minor update to DA9030 code. 2006-03-29 17:49:27 +02:00
Markus Klotzbuecher
c855ef6768 delta board: fix DA9030 reset procedure. 2006-03-27 16:01:03 +02:00
Markus Klotzbuecher
2770bcb21c Merge with http://www.denx.de/git/u-boot.git 2006-03-24 15:43:16 +01:00
Markus Klotzbuecher
ba70d6a417 delta board: DA9030 initialization and i2c support. Some minor changes to
make the pxa i2c driver work with the monahans cpu.
2006-03-24 12:23:27 +01:00
Markus Klotzbuecher
552fc624f2 Cleanup of the monahans cpu and delta board port. 2006-03-20 20:19:37 +01:00
Wolfgang Denk
d52fb7e3d1 Some code cleanup for GCC 4.x 2006-03-11 22:53:33 +01:00
Wolfgang Denk
951a954b77 Merge with /home/wd/git/u-boot/master
Code cleanup.
2006-03-06 23:18:48 +01:00
Markus Klotzbücher
43638c674a Cleanup of NAND support of delta board using the Monahans Data Flash
Controller.
2006-03-06 15:04:25 +01:00
Markus Klotzbücher
f9e029184b NAND finally working. Two bugs fixed:
* For READ_STATUS and READID commands always 8 bytes need to be read from
   NDDB. Otherwise they stay there and get send to flash as the first data
   word when writing.

 * In nand_base.c the oob variable is not reset so this->oob_buf is
   overwritten what eventually screws up the bad block descriptor table.
2006-03-06 13:45:42 +01:00
Markus Klotzbücher
bf7cac033b Lots of new stuff:
* Debug message can be turned on and off.
 * Waiting for events now times out.
 * Implemented RESET command.
 * Added appropriate nand_bbt_descriptor and nand_oobinfo.

Remaining Problems:
 * Read Status still behaves weird an returns invalid stuff sometimes.
 * ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
Markus Klotzbücher
f8785e96c9 Erasing works too now. The CS don't care causes problem with READSTATUS,
don't ask me why. There are still bugs in the bad block logic.
2006-03-03 20:13:43 +01:00
Markus Klotzbücher
24e1217be3 Write operation is working. Turned out that the READSTATUS hack was wrong
after all.
2006-03-03 16:09:28 +01:00
Markus Klotzbücher
9187a35b6c Writing is working, but there's still a bug that causes the data written to
start at an offset of 4 bytes from the start of the page.
2006-03-03 15:37:01 +01:00
Markus Klotzbücher
19fdeff433 Implemented writing, not working yet. 2006-03-03 12:11:11 +01:00
Markus Klotzbücher
e2053f9c7a Moved the waiting loop for "Read Data Request" RDDREQ into the
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
2006-03-02 14:02:36 +01:00
Markus Klotzbücher
bb1ff049fb Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since
there are 0)
2006-03-02 12:10:01 +01:00
Markus Klotzbücher
481911c78c Further NAND stuff implemented. Basic read commands seem to work. 2006-03-01 23:33:27 +01:00
Markus Klotzbücher
00c35bd214 Added GPIO initialization of DF signal. Still not working. 2006-02-28 22:51:01 +01:00
Markus Klotzbücher
6949328d7d First steps implementing NAND support. Not working, fails to read ID. 2006-02-28 18:05:25 +01:00
Markus Klotzbücher
599f52253a SDRAM now working. 2006-02-22 17:48:43 +01:00
Markus Klotzbücher
ff3c2a9478 SDRAM now working for delta board, but there are still aliasing problems,
we only see 64MB.
2006-02-22 14:05:44 +01:00
Markus Klotzbücher
48b6242aa1 SDRAM seems to be working on delta board, though u-boot doesn't start yet. 2006-02-22 00:06:01 +01:00
Markus Klotzbücher
4f7a0e3671 New board directory and config for the benq delta board (copied from
zylonite). Minor pxa-regs.h update.
2006-02-20 16:37:37 +01:00