Commit Graph

8710 Commits

Author SHA1 Message Date
Masahiro Yamada
a111bfbfad mmc: uniphier: add driver for UniPhier SD/MMC host controller
Add a driver for the on-chip SD/eMMC host controller used by
UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
b9a66b63b4 gpio: uniphier: add driver for UniPhier GPIO controller
This GPIO controller device is used on UniPhier SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-29 03:50:15 +09:00
Tom Rini
50dc8677d7 Merge git://git.denx.de/u-boot-usb 2016-02-26 18:08:43 -05:00
Tom Rini
d5c6144fe3 Merge git://git.denx.de/u-boot-dm 2016-02-26 16:22:28 -05:00
Alison Wang
903d384d40 net: phy: atheros: Fix problem with phy_reset() clearing BMCR
In commit <a058052c358c> [net: phy: do not read configuration register on
reset], phy_reset() will clear the BMCR register. Bit 12(AUTO_NEGOTIATION)
is cleared too. It causes auto-negotiation timeout error on Atheros's
PHY AR8033.

To fix this problem, genphy_config_aneg() and genphy_restart_aneg()
needs to be called in ar8035_config() to enable and restart
auto-negotiation.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-26 13:32:37 -06:00
Marek Vasut
abd702f48c usb: ehci: Fix warning on aarch64
Fix the following warning on aarch64 introduced by using p2v/v2p
functions in the code:

In file included from ./arch/arm/include/asm/byteorder.h:29:0,
                 from include/compiler.h:125,
                 from include/image.h:19,
                 from include/common.h:88,
                 from drivers/usb/host/ehci-hcd.c:10:
drivers/usb/host/ehci-hcd.c: In function ‘ehci_td_buffer’:
drivers/usb/host/ehci-hcd.c:250:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr));
                                                 ^
include/linux/byteorder/little_endian.h:34:51: note: in definition of macro ‘__cpu_to_le32’
 #define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
                                                   ^
drivers/usb/host/ehci-hcd.c:250:24: note: in expansion of macro ‘cpu_to_hc32’
   td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr));

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>
2016-02-26 19:45:05 +01:00
Bin Meng
6796704b0d pci: Fix compiler warnings in dm_pciauto_setup_device()
Fix the following compiler warnings when DEBUG is on.

warning: 'bar_res' may be used uninitialized in this function.
drivers/pci/pci_auto.c:101:21:
   if (!enum_only && pciauto_region_allocate(bar_res, bar_size,
                        ^

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:53:10 -07:00
Simon Glass
0badb23d11 spi: Correct two error return values
When an error number is provided we should use it, not change it. This fixes
the SPI and SPI flash tests.

One of these is long-standing. The other seems to have been introduced by
commit 1e90d9fd (sf: Move read_id code to sf_ops).

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 1e90d9fd (sf: Move read_id code to sf_ops)
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2016-02-26 08:53:10 -07:00
Simon Glass
ffe276d27a sandbox: spi: Remove an incorrect free()
We must not free data that is managed by driver mode. Remove this line,
which is a hangover from the pre-driver-model code.

This fixes a problem where 'sf probe' crashes U-Boot if the backing file
for the SPI flash cannot be found.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-26 08:53:10 -07:00
Simon Glass
20f655da11 sandbox: spi: Add more debugging to SPI emulation
Add a little more debugging to help when things go wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2016-02-26 08:53:10 -07:00
Simon Glass
01476eaf07 sandbox: timer: Support the early timer
Add support for the early timer so we can use tracing with sandbox again.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:53:10 -07:00
Simon Glass
c95fec3192 timer: Provide an early timer
In some cases the timer must be accessible before driver model is active.
Examples include when using CONFIG_TRACE to trace U-Boot's execution before
driver model is set up. Enable this option to use an early timer. These
functions must be supported by your timer driver: timer_early_get_count()
and timer_early_get_rate().

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:53:10 -07:00
Simon Glass
4f051824b5 timer: Support tracing fully
A few of the functions in the timer uclass are not marked with 'notrace'. Fix
this so that tracing can be used with CONFIG_TRACE.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:53:10 -07:00
Michal Simek
966bfa7347 serial: dcc: Move driver to DM
Enabling this driver requires some DT changes.
Adding DCC to root or main bus:
dcc: dcc {
	compatible = "arm,dcc";
	u-boot,dm-pre-reloc;
};

Extend alias list to link DCC:
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &dcc;

Change stdout-path to point to dcc port.
	stdout-path = "serial2:115200n8";

Also add support for debug uart to help with early debug.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-25 19:06:37 -05:00
Tom Rini
fec26e7270 Merge branch 'master' of git://git.denx.de/u-boot-usb 2016-02-24 18:44:17 -05:00
Tom Rini
e1417c7b66 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-02-24 18:44:15 -05:00
Nikita Kiryanov
9bcfca123c pmic: tps65218: add useful functions and defines
Add the following functions:
tps65218_reg_read() for accessing redisters
tps65218_toggle_fseal() for toggling the fseal bit
tps65218_lock_fsea() for locking the fseal bit to 1

Add the following defines:
All status register bits

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:07 -05:00
Andreas Bießmann
ed48899c11 pci_rom: fix may be used uninitialized warning
Building pci_rom.c with my toolchain complains about may be used uninitialized
rom varaible:

---8<---
+drivers/pci/pci_rom.c:269:25: note: 'rom' was declared here
w+drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios':
w+drivers/pci/pci_rom.c:154:14: warning: 'rom' may be used uninitialized in this function [-Wmaybe-uninitialized]
--->8---

Fix this as done in 55616b86c7 the ram variable.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-02-24 18:43:59 -05:00
Vikas Manocha
e66c49fa93 stm32: add support for stm32f7 & stm32f746 discovery board
This patch adds support for stm32f7 family & stm32f746 board.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:43:57 -05:00
Vikas Manocha
6a12cebd90 stm32x7: add support for stm32x7 serial driver
This patch adds support for stm32f7 family usart peripheral.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-24 18:43:54 -05:00
Vikas Manocha
09959ba3c5 gpio: stm32_gpio: move base addresses to the soc file
Base addresses for GPIOs could be different for different socs, this
patch moves the base addresses from driver to the soc specific location.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:42:50 -05:00
Vikas Manocha
14cec06113 gpio: stm32_gpio: move clock config from driver to board
This patch removes the gpio clock enable from gpio driver & move it in the
board code, making it possible to use the gpio driver with other socs.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:42:49 -05:00
Steve Rae
a18c2706f1 fastboot: update error and warning messages
Fix the formatting in error messages, and demote one error message
to a warning, as it is only informational.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-02-24 19:12:33 +01:00
Stephen Warren
53419bac4e usb: eth: fix memalign() parameter order
The alignment and size were swapped, leading to malloc heap corruption.

On my system, this sometimes caused U-Boot to crash during or after
certain USB Ethernet operations.

Fixes: c8c2797c38 ("dm: usb: eth: Support driver model with USB Ethernet")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-24 19:12:33 +01:00
Lukasz Majewski
fc18f8d170 dfu: usb: f_dfu: Set deferred call for dfu_flush() function
This patch fixes situation when one would like to write large file into
medium with the file system (fat, ext4, etc).
This change sets file size limitation to the DFU internal buffer size.

Since u-boot is not supporting interrupts and seek on file systems, it
becomes challenging to store large file appropriately.

To reproduce this error - create large file (around 26 MiB) and sent it
to the target board.

Lets examine the flow of USB transactions:

0. DFU uses EP0 with 64B MPS [Max Packet Size]

1. Send file - OUT (PC->target) - dat_26MiB.img is sent with 4096 B transactions

2. Get status - OUT (PC->target) - wait for DFU_STATE_dfuDNLOAD_IDLE (0x05) sent
				   from target board - IN transaction
				   (target->PC)

3. The whole file content is sent to target - OUT (PC->target) with ZLP [Zero
					      Length Packet]

Now the interesting part starts:

4. OUT (PC->target) Setup transaction (request to share DFU state)

5. IN (target->PC) - reply the current DFU state
	- In the UDC driver the req->completion (with dfu_flush) is called
	  after successful IN transfer.
	- The dfu_flush() (called from req->completion callback) saves the
	  whole file at once (u-boot doesn't support seek on fs).
	  Such operation takes considerable time. When the file
	  is large - e.g. 26MiB - this time may be more than 5 seconds.

6. OUT (PC->target) - ZLP, is send in the same time when dfu_flush()
 writes data to eMMC memory.
 The dfu-util application has hard coded timeout on USB transaction
 completion set to 5 seconds (it uses libusb calls).

When the file to store is large (e.g. 26 MiB) the time needed to write it
may excess the dfu-util timeout and following error message will be displayed:
"unable to read DFU status" on the HOST PC console.

This change is supposed to leverage DFU's part responsible for storing files
on file systems. Other DFU operations - i.e. raw/partition write to NAND and
eMMC should work as before.

The only functional change is the error reporting. When dfu_flush() fails
the u-boot prompt will exit with error information and dfu-util application
exits afterwards as well.

Test HW:
- Odroid XU3 (Exynos5433) - test with large file
- Trats (Exynos4210) - test for regression - eMMC, raw,

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reported-by: Alex Gdalevich <agdalevich@axion-biosystems.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Heiko Schocher <hs@denx.de>
2016-02-24 19:12:32 +01:00
Marek Vasut
e88a1b75d5 usb: ehci: Be explicit about the BE IO accessors
Add explicit cpu_to_be32()/be32_to_cpu() conversion to BE EHCI I/O
accessors to align them with their LE counterpart. No functional
change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
2016-02-24 19:12:32 +01:00
Marek Vasut
7ab0d35543 usb: ehci: Clear USBMODE_BE on LE MMIO
If the USB EHCI is configured for little endian MMIO, make sure to
clear the USBMODE_BE flag from the USBMODE register.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
2016-02-24 19:12:32 +01:00
Marek Vasut
cf7c93cdd7 usb: ehci: Implement V2P mapping
Certain processor architectures, like MIPS, require that the USB
structures and transfer buffers are passed with their PA to the
USB controller. If VA is passed, the USB will not work. Add the
necessary virt_to_phys() calls into the USB EHCI code to make it
work.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
2016-02-24 19:12:32 +01:00
Marek Vasut
643cacb6d6 usb: ehci: Use map_physmem in ehci-generic
Some architectures, like MIPS, require remapping of the registers.
Add the map_physmem() call to handle it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
2016-02-24 19:12:32 +01:00
Zhao Qiang
d3e6d30cef board: ls1043ardb: Add micro QE support for ls1043ardb
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:14 -08:00
Zhao Qiang
3bf46e6a6d driver: qe: Mask the codes not used for micro QE
there are some code in qe.c not used for micro QE,
use "#ifdef CONFIG_QE" to mask them.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:14 -08:00
Qianyu Gong
6fc9535f39 driver/fm: fdt.c: fix fdt_fixup_fman_firmware() to support ARM platforms
Use fdt32_to_cpu() to convert the data correctly for both endianness
platforms.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:13 -08:00
Qianyu Gong
075affb1ac fm: fdt: Move fman ucode fixup to driver code
Not only powerpc/mpc85xx but also Freescale Layerscape platforms will
use fdt_fixup_fman_firmware() to insert Fman ucode blob into the device
tree. So move the function to Fman driver code.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:13 -08:00
Qianyu Gong
2459afb1a7 qe: move drivers/qe/qe.h to include/fsl_qe.h
As the QE firmware struct is shared with Fman, move the header file
out of drivers/qe/.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:51:13 -08:00
Aneesh Bansal
f698e9f39a powerpc/SECURE_BOOT: Add PAMU driver
PAMU driver basic support for usage in Secure Boot.
In secure boot PAMU is not in bypass mode. Hence to use
any peripheral (SEC Job ring in our case), PAMU has to be
configured.

The patch reverts commit 7cad2e38d6.

The Header file pamu.h and few functions in driver have been derived
from Freescale Libos.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:40:55 -08:00
Ruchika Gupta
7f4736bd65 drivers/crypto/fsl : Allocate output ring with size aligned to CACHELNE SIZE
The output ring needs to be invalidated before enqueuing the job to SEC.
While allocation of space to output ring, it should be taken care that the
size is cacheline size aligned inorder to prevent invalidating valid data.

The patch also correct the method of aligning end of structs while flushing caches

    Since start = align(start_of_struct), it is incorrect to assign
    end = align(start + struct_size). It should instead be,
    end = align(start_of_struct + struct_size).

Signed-off-by: Saksham Jain <saksham@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:40:55 -08:00
Tom Rini
52dd704bf8 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-02-23 15:35:47 -05:00
Jelle van der Waa
dc44fd8ae4 sunxi: H3: Add support for the host usb-phys
Add support for phy 1-3.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
[hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-02-23 20:59:10 +01:00
Jelle van der Waa
0d8382ae70 sunxi: power: add support for sy8106a driver
SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.

This driver is required to ensure the SY8106A V-CPU
voltage is set to 1200 mV after a software reset. On cold
boot the default SY8106A output voltage is selected to be
1200 mV by a pair of resistors on the Orange Pi PC and Plus.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-02-23 20:50:07 +01:00
Tom Rini
b625fab706 Merge branch 'master' of git://git.denx.de/u-boot-spi 2016-02-23 08:13:46 -05:00
Christophe Ricard
674f3609aa spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLEN
In some case wordlen may not be set. Use SPI_DEFAULT_WORDLEN as default.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:46 +05:30
Christophe Ricard
3963919e5b spi: omap3: Remove unused variable irqstatus in omap3_spi_txrx
Remove unused variable irqstatus in omap3_spi_txrx

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:46 +05:30
Mugunthan V N
1218e5c507 drivers: dma: ti-edma3: convert driver to adopt driver model
adopt ti-edma3 driver to device driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:46 +05:30
Mugunthan V N
518b0afc33 spi: ti_qspi: compile out spi_flash_copy_mmap when CONFIG_DMA is defined
When CONFIG_DMA is defined the default spi_flash_copy_mmap() can
handle dma memory copy, so compile out spi_flash_copy_mmap() from
ti_qspi driver when CONFIG_DMA config is defined.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:46 +05:30
Mugunthan V N
7bd1c59bdb sf: spi_flash: use dma to copy data from mmap region if platform supports
Add dma memcpy api to the default spi_flash_copy_mmap(), so that
dma will be used to copy data when CONFIG_DMA is defined for the
platform.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:46 +05:30
Mugunthan V N
58da672d49 dma: Kconfig: Add TI_EDMA3 entry
Add TI_EDMA3 entry on Kconfig with help description.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:45 +05:30
Mugunthan V N
a0594cefb7 dm: implement a DMA uclass
Implement a DMA uclass so that the devices like ethernet, spi,
mmc etc can offload the data transfers from/to the device and
memory.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:45 +05:30
Tom Rini
bed6bd326e Merge branch 'master' of git://git.denx.de/u-boot-video 2016-02-22 13:12:47 -05:00
Marek Vasut
703c751169 video: Add S3C24xx framebuffer support
Add basic framebuffer driver for the S3C24xx family of CPUs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>

V2: Keep the Makefile sorted.
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-02-22 18:07:17 +01:00
Michal Simek
6a10bc5be8 net: phy: realtek: Use generic genphy_parse_link() for RTL8211E
The problem with current implementation is that SPDDONE bit is 1
but link bit is zero. That's why phydev->link is setup to 0
which ending up in driver failure that link is not up.

Log:
Zynq> dhcp
ethernet@e000b000 Waiting for PHY auto negotiation to complete.......
done
ethernet@e000b000: No link.

There is at least 1ms delay between spddone bit and link up.

Use genphy_read_status() instead of realtek implemenation which is
working with page 11. Linux driver is also using generic implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:37:50 +01:00