Stefan Roese
c57c7980ff
Add NAND FLASH support for AMCC Bamboo 440EP eval board
...
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 17:56:56 +02:00
Wolfgang Denk
eece159cdd
Add configuration for IFM SPI eval board
2005-08-10 11:03:05 +02:00
Wolfgang Denk
9d3338d2b9
Fix CompactFlash problem on HMI1001 board
2005-08-10 10:06:25 +02:00
Stefan Roese
846b0dd2dc
Changed CONFIG_440_xx to CONFIG_440xx for a consistent design (405 and linux)
...
Patch by Stefan Roese, 08 Aug 2005
2005-08-08 12:42:22 +02:00
Wolfgang Denk
700a0c648d
Add common (with Linux) MTD partition scheme and "mtdparts" command
...
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00
Wolfgang Denk
452e8e72ad
Fix build problems for PM856 Board
2005-08-08 00:47:14 +02:00
Wolfgang Denk
d06a5f7ebf
Add support for Altera NIOS DK1C20 board
...
Patch by Shlomo Kut, 13 Dec 2004
2005-08-06 01:56:59 +02:00
Wolfgang Denk
f901a83b70
Add support for ep8248 board
...
Patch by Yuli Barcohen, 12 Dec 2004
Minor code cleanup.
2005-08-06 01:42:58 +02:00
Wolfgang Denk
3836221d5b
Fix typo
2005-08-06 01:02:27 +02:00
Wolfgang Denk
d56019c0ee
Merge with /home/sr/git/u-boot
2005-08-05 23:55:19 +02:00
Wolfgang Denk
b4f15fdaf7
Merge with /home/wd/git/u-boot/jon_loeliger
2005-08-05 20:03:38 +02:00
Wolfgang Denk
b20d00328c
Add support for MicroSys PM856 board
...
Patch by Josef Wagner, 03 Aug 2005
2005-08-05 12:19:30 +02:00
Wolfgang Denk
992b402bbf
Minor fixes to PM854 board
...
Patch by Josef Wagner, 03 Aug 2005
2005-08-05 11:47:10 +02:00
Wolfgang Denk
cbf9c11728
Merge with /home/wd/git/u-boot/master
2005-08-05 11:22:28 +02:00
Jon Loeliger
a99a0a98b9
Default 8349ADS CONFIG_PCI off for now.
...
Real support for PCI comes in a follow-up patch.
2005-08-04 17:32:05 -05:00
Wolfgang Denk
452f67407b
Adjust configuration of XENIAX board
...
(chip select and GPIO required for USB operation)
2005-08-04 19:45:01 +02:00
Stefan Roese
17f50f22bc
Add support for AMCC Bamboo PPC440EP eval board
...
Patch by Stefan Roese, 04 Aug 2005
2005-08-04 17:09:16 +02:00
Wolfgang Denk
460c322f13
(re)enabled scsi commands do_scsi() and do_scsiboot()
...
Patch by Denis Peter, 06 Dec 2004
2005-08-04 01:14:12 +02:00
Wolfgang Denk
dc17fb6dc2
Cleanup build problems (on Fedora Core x86_64 build host)
2005-08-03 22:32:02 +02:00
Jon Loeliger
4b1d95d96a
Merge with rsync://git-user@source.denx.net/git/u-boot.git
2005-08-02 13:53:07 -05:00
Wolfgang Denk
095b8a3798
Coding style cleanup
2005-08-02 17:06:17 +02:00
Wolfgang Denk
7d939f8947
Merge with /home/sr/git/u-boot
2005-08-02 14:43:57 +02:00
Jon Loeliger
de1d0a6995
Fix style issues primarily in 85xx and 83xx boards.
...
- C++ comments
- Trailing white space
- Indentation not by TAB
- Excessive amount of empty lines
- Trailing empty lines
2005-08-01 13:20:47 -05:00
Stefan Roese
8a316c9b62
Major cleanup for AMCC PPC4xx eval boards.
...
Patch by Stefan Roese, 01 Aug 2005
2005-08-01 16:49:12 +02:00
Stefan Roese
c157d8e219
Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
...
Patch by Steven Blakeslee, 27 Jul 2005
2005-08-01 16:41:48 +02:00
Wolfgang Denk
0f18cb6eef
Minor fixes for PPChameleon Board:
...
* fix alignment of NAND size
* make code do what the comment says
2005-07-31 00:30:09 +02:00
Lunsheng Wang
b0e3294923
* Patch by Ron Alder, 11 July 2005
...
Add Xianghua Xiao and Lunsheng Wang's support for the
GDA MPC8540 EVAL board.
2005-07-29 10:20:29 -05:00
Eran Liberty
f046ccd15c
* Patch by Eran Liberty
...
Add support for the Freescale MPC8349ADS board.
2005-07-28 10:08:46 -05:00
Jon Loeliger
d9b94f28a4
* Patch by Jon Loeliger, 2005-05-05
...
Implemented support for MPC8548CDS board.
Added DDR II support based on SPD values for MPC85xx boards.
This roll-up patch also includes bugfies for the previously
published patches:
DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
2005-07-25 14:05:07 -05:00
Jon Loeliger
288693abe1
* Patch by Jon Loeliger, 2005-Feb-10
...
Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
2005-07-25 12:14:54 -05:00
Jon Loeliger
7202d43dde
* Patch by Jon Loeliger, Kumar Gala, 2005-02-08
...
For MPC85xxCDS:
Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
for faster flash parts.
Add documentation for BR/OR for FLASH.
2005-07-25 11:13:26 -05:00
Jon Loeliger
9c4c5ae3e1
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
...
- Convert the CPM2 based functionality to use new CONFIG_CPM2
option rather than a myriad of CONFIG_MPC8560-like variants.
Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
Eliminates the CONFIG_MPC8560 option entirely. Distributes the
new CONFIG_CPM2 option to each 8260 board.
2005-07-23 10:37:35 -05:00
Wolfgang Denk
08abe15850
Add CompactFlash support for HMI1001 board.
2005-07-21 15:23:29 +02:00
wdenk
88804d19e2
* Patch by Detlev Zundel, 30 Jun 2005:
...
Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
2005-07-04 00:03:16 +00:00
stroese
3c71f3e8aa
* Patch by Stefan Roese, 1 Jul 2005:
...
Fix PHY address for CATcenter board (now correct!)
2005-07-01 15:53:57 +00:00
stroese
bf41886f9d
* Patch by Stefan Roese, 30 Jun 2005:
...
Fix PHY addresses for PPChameleon and CATcenter boards
Change MAINTAINER for most esd boards
2005-06-30 13:06:07 +00:00
wdenk
342717f72a
* Fix baudrate calculation problem on MPC5200 systems
...
* Add MPC8220 boards to MAKEALL script
* Add EEPROM and RTC support for HMI1001 board
* Patch by Detlev Zundel, 20 Jun 2005:
Fix initialization of low active GPIO pins on inka4x0 board
2005-06-27 13:30:03 +00:00
wdenk
024447b186
Enable redundant environment, disable HW flash protection of HMI1001 board
2005-06-20 10:28:38 +00:00
wdenk
a87589da74
* Add support for HMI1001 board
...
* Disable "date" and "sntp" commands on TQM866M which has no RTC
2005-06-10 10:00:19 +00:00
wdenk
ba91e26a19
Patch by Juergen Selent, 17 May 2005:
...
Add support for Funkwerk VoVPN gateway module.
2005-05-30 23:55:42 +00:00
wdenk
2eab48f511
* Extend burst mode RAM test program to take a loop count
...
(0 = infinite)
* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
those boards that use it.
2005-05-23 10:49:50 +00:00
wdenk
16b013e750
Patch by Greg Ungerer, 19 May 2005:
...
add support for the OpenGear CM4008 board
2005-05-19 22:46:33 +00:00
wdenk
7680c140af
Add PCI support for Sorcery board.
...
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
2005-05-16 15:23:22 +00:00
wdenk
9dd41a7b0c
* Fix debug code in omap5912osk flash driver
...
* Add support for MPC8247 based "IDS8247" board.
2005-05-12 22:48:09 +00:00
wdenk
d44e14b5fc
Add support for 2 x TSEC interfaces on the TQM8540 board.
2005-05-10 15:51:35 +00:00
wdenk
60fc6cbbb7
Increase CFG_MONITOR_LEN for Rattler board to match actual code size.
2005-05-05 09:13:21 +00:00
wdenk
07cc099941
Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
...
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
2005-05-05 00:04:14 +00:00
stroese
81b83c9ecc
* Patch by Matthias Fuchs, 03 May 2005:
...
Added missing variable declaration in cmd_nand.c
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
2005-05-03 06:12:20 +00:00
stroese
dcb2f95a60
* Patch by Stefan Roese, 03 May 2005:
...
Update for P3G4
Fix problems in cmd_universe.c
2005-05-03 06:06:41 +00:00
wdenk
9f709b6cee
Fix INKA4x0: use CS1 as gpio_wkup_6 output
2005-04-22 15:09:09 +00:00