Commit Graph

71 Commits

Author SHA1 Message Date
Marian Balakowicz
3bab76a26e Delay FIT format check on sector based devices
Global FIT image operations like format check cannot be performed on
a first sector data, defer them to the point when whole FIT image was
uploaded to a system RAM.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
2008-06-30 22:52:43 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Marcel Ziswiler
1df368aed3 ide: Remove spurious second include of io.h
Removed the second include, with all the #ifdef around as suggested by Wolfgang.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-05-09 20:55:57 +02:00
Guennadi Liakhovetski
413bf58626 IDE: fix compiler warnings
The IDE driver can use 32-bit addresses in LBA mode, in which case it
spits multiple warnings during compilation. Fix them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-04-28 20:42:51 +02:00
Martin Krause
e175eacc87 IDE: fix bug in reset sequence
According to the ata (ata5) specification the RESET- signal
shall be asserted for at least 25 us. Without this patch,
the RESET- signal is asserted on some boards for only < 1 us
(e. g. on the TQM5200). This patch adds a general delay of
25 us to the RESET- signal.

Without this patch a Platinum 4 GiB CF card is not recognised
properly on boards with a TQM5200 (STK52xx, TB5200).

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2008-04-17 14:26:48 -07:00
Marian Balakowicz
1372cce2b9 [new uImage] Use show_boot_progress() for new uImage format
This patch allocates a set of show_boot_progress() IDs for new uImage format
and adds show_boot_progress() calls in new uImage format handling code.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:33:01 +01:00
Marian Balakowicz
09475f7527 [new uImage] Add new uImage format handling to other bootm related commands
Updated commands:

docboot  - cmd_doc.c
fdcboot  - cmd_fdc.c
diskboot - cmd_ide.c
nboot    - cmd_nand.c
scsiboot - cmd_scsi.c
usbboot  - cmd_usb.c

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:33:01 +01:00
Marian Balakowicz
9a4daad0a3 [new uImage] Update naming convention for bootm/uImage related code
This patch introduces the following prefix convention for the
image format handling and bootm related code:

genimg_		- dual format shared code
image_		- legacy uImage format specific code
fit_		- new uImage format specific code
boot_		- booting process related code

Related routines are renamed and a few pieces of code are moved around and
re-grouped.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 14:58:34 +01:00
Marian Balakowicz
d5934ad775 [new uImage] Add dual format uImage support framework
This patch adds framework for dual format images. Format detection is added
and the bootm controll flow is updated to include cases for new FIT format
uImages.

When the legacy (image_header based) format is detected appropriate
legacy specific handling is invoked. For the new (FIT based) format uImages
dual boot framework has a minial support, that will only print out a
corresponding debug messages. Implementation of the FIT specific handling will
be added in following patches.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-25 15:53:49 +01:00
Marian Balakowicz
2242f53698 [new uImage] Rename and move print_image_hdr() routine
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:27:41 +01:00
Marian Balakowicz
b97a2a0a21 [new uImage] Define a API for image handling operations
- Add inline helper macros for basic header processing
- Move common non inline code common/image.c
- Replace direct header access with the API routines
- Rename IH_CPU_* to IH_ARCH_*

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:53 +01:00
Nobuhiro Iwamatsu
521dcd30b9 Merge git://www.denx.de/git/u-boot
Conflicts:

	drivers/Makefile
2007-12-07 01:20:16 +09:00
Nobuhiro Iwamatsu
7fc792895b Merge git://www.denx.de/git/u-boot
Conflicts:

	drivers/Makefile
2007-11-29 00:56:37 +09:00
Grant Likely
4a43719a77 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
Modify common/Makefile to conditionally compile the cmd_*.c files based
on the board config.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-20 22:33:54 -07:00
Jean-Christophe PLAGNIOL-VILLARD
5c15010efa Fixed mips_io_port_base build errors.
This patch has been sent on:
- 29 Sep 2007

Although mips_io_port_base is currently a part of IDE command, it is quite
fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
it to MIPS general part, and introduce `set_io_port_base()' from Linux.

This patch is triggered by multiple definition of `mips_io_port_base' build
error on gth2 (and tb0229 also needs this fix.)

board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
/home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
make: *** [u-boot] Error 1

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-17 01:37:44 +01:00
Jean-Christophe PLAGNIOL-VILLARD
7a60ee7c62 Fix warning differ in signedness in common/cmd_ide.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-16 22:42:03 +01:00
Nobuhiro Iwamatsu
eda3e1e661 sh: Add support command of ide with sh
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-09-23 02:42:38 +09:00
Heiko Schocher
f98984cb19 IDE: - make ide_inb () and ide_outb () "weak", so boards can
define there own I/O functions.
          (Needed for the pcs440ep board).
        - The default I/O Functions are again 8 Bit accesses.
        - Added CONFIG_CMD_IDE for the pcs440ep Board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-08-28 17:39:14 +02:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Andy Fleming
6bf6f114dc Merge branch 'testing' into working
Conflicts:

	CHANGELOG
	fs/fat/fat.c
	include/configs/MPC8560ADS.h
	include/configs/pcs440ep.h
	net/eth.c
2007-08-03 02:23:23 -05:00
Heiko Schocher
fad6340715 make show_boot_progress () weak.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-13 09:54:17 +02:00
Jon Loeliger
c76fe47425 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-08 18:02:23 -05:00
Jon Loeliger
65c450b47a common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:23:09 +02:00
Heiko Schocher
566a494f59 [PCS440EP] upgrade the PCS440EP board:
- Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-22 19:11:54 +02:00
Wolfgang Denk
9045f33c02 Fix config problems on SC3 board; make ide_reset_timeout work. 2007-06-08 10:24:58 +02:00
Denis Peter
7882751c78 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
Fix bug introduced by "Fix get_partition_info() parameter error in all
other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
to use diskboot or scsiboot form another device than 0.

Signed-off-by: Denis Peter <d.peter@mpl.ch>
2007-04-13 09:13:33 +02:00
Greg Lopp
0b94504d22 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
Signed-of-by: Greg Lopp <lopp@pobox.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2007-04-13 08:02:24 +02:00
Wolfgang Denk
51056dd986 Update for SC3 board
* Make IDE timeout configurable through ide_reset_timeout variable.
* Use Newline as "password" string
* Use just a single partition in NAND flash
2007-04-11 17:22:55 +02:00
Grant Likely
eb867a7623 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
Block device read/write is anonymous data; there is no need to use a
typed pointer.  void * is fine.  Also add a hook for block_read functions

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-02-20 09:05:45 +01:00
Grant Likely
735dd97b1b [PATCH 1_4] Merge common get_dev() routines for block devices
Each of the filesystem drivers duplicate the get_dev routine.  This change
merges them into a single function in part.c

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-02-20 09:04:34 +01:00
Wolfgang Denk
0c32d96ddd Add support for gth2 board
Patch by Thomas Lange, Aug 11 2005
2006-06-16 17:32:31 +02:00
Wolfgang Denk
d87080b721 GCC-4.x fixes: clean up global data pointer initialization for all boards. 2006-03-31 18:32:53 +02:00
Wolfgang Denk
c75eba3b41 Fix U-Boot compilation for MIPS boards using ELDK 4.0 2005-12-01 02:15:07 +01:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
wdenk
f4733a0764 Add port initialization for digital I/O on INKA4x0 2005-03-06 01:21:30 +00:00
wdenk
b05dcb58fe * Fix get_partition_info() parameter error in all other calls
(common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).

* Enable USB and IDE support for INKA4x0 board

* Patch by Andrew Dyer, 28 February 2005:
  fix ext2load passing an incorrect pointer to get_partition_info()
  resulting in load failure for devices other than 0
2005-03-04 11:27:31 +00:00
wdenk
b9649854f6 Fix yet another recently introduced bug. 2005-02-08 15:29:01 +00:00
wdenk
1a344f298d * Removed '--no-warn-mismatch' option from Makefile. This option
makes 'ld' to overlook binary objects compatibility.

* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
  --end-group) outside of the group. This will make 'ld' to do
  _multiple_ search in the library group when resolving symbol
  references and do only a _single_ seach in libgcc.a after the group
  search.

* Fix stability problems on CPC45 board again.

* Make image detection for diskboot / usbboot / scsiboot more robust
  (also check header checksum)
2005-02-03 23:00:49 +00:00
wdenk
cd172b7108 Fix IDE stability problems on CPC45 board. 2005-01-22 18:26:04 +00:00
wdenk
e2ffd59b4d * Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
stroese
fa838874cf remove "static" from "ide_dev_desc" to use it from external code 2004-12-16 17:40:30 +00:00
wdenk
64f70bede3 Fix problems with CDROM drive as slave device on Lite5200 IDE bus. 2004-09-28 20:34:50 +00:00
wdenk
5cf91d6bdc * Modify KUP4X board configuration to use SL811 driver for USB memory
sticks (including FAT / VFAT filesystem support)

* Add SL811 Host Controller Interface driver for USB

* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README

* Patch by Pantelis Antoniou, 19 Apr 2004:
  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
  Minor patches for Intracom boards.

* Patch by Christian Pell, 19 Apr 2004:
  cleanup support for CF/IDE on PCMCIA for PXA25X
2004-04-23 20:32:05 +00:00
wdenk
6e5923851e * Cleanup, minor fixes
* Patch by Rune Torgersen, 16 Apr 2004:
  LBA48 fixes

* Patches by Pantelis Antoniou, 16 Apr 2004:
  - Fix some compile problems;
    add "once" functionality for the netretry variable
2004-04-18 17:39:38 +00:00
wdenk
db01a2ea99 * Patch by Stephen Williams, 01 Apr 2004:
Add support for Picture Elements JSE board

* Patch by Christian Pell, 01 Apr 2004:
  Add CompactFlash support for PXA systems.
2004-04-15 23:14:49 +00:00
wdenk
0608e04da9 * Patch by Klaus Heydeck, 13 Mar 2003:
Add support for KUP4X Board
2004-03-25 19:29:38 +00:00
wdenk
6fb6af6dc9 * Patch by Stephen Williams, 19 March 2004
Increase speed of sector reads from SystemACE,
  shorten poll timeout and remove a useless reset

* Patch by Tolunay Orkun, 19 Mar 2004:
  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
  (CONFIG_PHY_GIGE)

* Patch by Brad Kemp, 18 Mar 2004:
  prevent machine checks during a PCI scan

* Patch by Pierre Aubert, 18 Mar 2004:
  Fix string cleaning in IDE identification
2004-03-23 23:20:24 +00:00
wdenk
efa329cb89 * Add start-up delay to make sure power has stabilized before
attempting to switch on USB on SX1 board.

* Patch by Josef Wagner, 18 Mar 2004:
  - Add support for MicroSys XM250 board (PXA255)
  - Add support for MicroSys PM828 board (MPC8280)
  - Add support for 32 MB Flash on PM825/826
  - new SDRAM refresh rate for PM825/PM826
  - added support for MicroSys PM520 (MPC5200)
  - replaced Query by Identify command in CPU86/flash.c
    to support 28F160F3B

* Fix wrap around problem with udelay() on ARM920T

* Add support for Macronix flash on TRAB board
2004-03-23 20:18:25 +00:00
wdenk
7d7ce4125f Patch by Pierre Aubert, 15 Mar 2004:
Fix buffer overflow in IDE identification
2004-03-17 01:13:07 +00:00
wdenk
42dfe7a184 Code cleanup; make several boards compile & link. 2004-03-14 22:25:36 +00:00