Commit Graph

138 Commits

Author SHA1 Message Date
Ben Warren
d7fb9bcfb2 Fix compile warnings for const correctness
Commit 6e37b1a3a25004d3df5867de49fff6b3fc9c4f04 modifies several net calls
to take a (const char *) parameter instead of (char *), but in some cases
the modified functions call other functions taking (char *).  The end result
is warnings about discarding the const qualifier.

This patch fixes these other function signatures.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-08-09 11:52:30 -07:00
Mike Frysinger
1384f3bb8a net: warn about spaces in device names
Some commands operate on eth device names (like 'mii'), but those cannot
be passed on the command line as one argument.  So detect devices like
these and warn about them so someone will fix it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-07-12 00:14:28 -07:00
Wolfgang Denk
9c00b2f0a3 net/eth.c: eth_mac_skip() is only needed when CONFIG_NET_MULTI is set
Move it inside the #ifdef CONFIG_NET_MULTI to avoid

	eth.c:64: warning: 'eth_mac_skip' defined but not used

messages from anumber of old, non-CONFIG_NET_MULTI boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
2010-06-20 12:30:22 +02:00
Ben Warren
ecee9324d7 Program net device MAC addresses after initializing
Add a new function to the eth_device struct for programming a network
controller's hardware address.

After all network devices have been initialized and the proper MAC address
for each has been determined, make a device driver call to program the
address into the device.  Only device instances with valid unicast addresses
will be programmed.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
Tested-by: Prafulla Wadaskar <prafulla@marvell.com>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-03 14:52:49 -07:00
Detlev Zundel
aba4b69d01 net: Trivial coding style issue with empty for statement
Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03 14:52:47 -07:00
Mike Frysinger
6ac59c5518 net: pull CONFIG checks out of source and into makefile
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-12-13 21:31:26 -08:00
Mike Frysinger
86848a74c3 net: sync env ethaddr to device enetaddr in eth_init()
In the previous enetaddr refactoring, the assumption with commit 56b555a644
was that the eth layer would handle the env -> device enetaddr syncing.
This was not the case as eth_initialize() is called only once and the sync
occurs there.  So make sure the eth_init() function does the env -> device
sync with every network init.

Reported-by: Andrzej Wolski <awolski@poczta.fm>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-08-07 17:39:23 -07:00
Robin Getz
0ebf04c607 minor debug cleanups in ./net
Minor ./net cleanups - no functional changes
  - change #ifdef DEBUG printf(); #endif to just debug()
  - changed __FUNCTION__ to __func__
  - got rid of extra whitespace between function and opening brace
  - removed unnecessary braces on if statements

 gcc dead code elimination should make this functionally/size equivalent
 when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3).

 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-08-07 17:32:16 -07:00
Ben Warren
3bd0a877b7 Add warning about upcoming removal of old Ethernet API
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-07-22 22:53:44 -07:00
Ben Warren
6e0d2fc7fe Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:54 -07:00
Ben Warren
8453587ef9 Switched davinci_emac Ethernet driver to use newer API
Added CONFIG_NET_MULTI to all Davinci boards
Removed all calls to Davinci network driver from board code
Added cpu_eth_init() to cpu/arm926ejs/cpu.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:54 -07:00
Heiko Schocher
da95427ce4 netloop: updates for NetLoop
Fix some issues introduced from commit:
2f70c49e5b
suggested by Mike Frysinger.

- added some comment for the env_id variable in common_cmd_nvedit.c
- moved some variables in fn scope instead of file scope
- NetInitLoop now static void

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-05-15 21:19:02 +02:00
Peter Tyser
f9a109b3ad Replace __attribute references with __attribute__
__attribute__ follows gcc's documented syntax and is generally more
common than __attribute.  This change is only asthetic and should not
affect functionality.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-28 01:01:39 +02:00
Mike Frysinger
3f6e6993e9 net: new utility functions for working with enetaddr's
Declare new utility functions for converting between the environment
variables (eth*addr) and the binary MAC address representation.  This way
we can unify all the random places that already do this kind of thing.

The functions in question:
	eth_parse_enetaddr - "..." -> {...}
	eth_getenv_enetaddr - env -> {...}
	eth_setenv_enetaddr - {...} -> env

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:09 +01:00
Heiko Schocher
2f70c49e5b netloop: speed up NetLoop
NetLoop polls every cycle with getenv some environment variables.
This is horribly slow, especially when the environment is big.

This patch reads only the environment variables in NetLoop,
when they were changed.

Also moved the init part of the NetLoop function in a seperate
function.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-02-22 23:49:33 -08:00
Andy Fleming
9e56986a2b Add eth_get_dev_by_index
This allows code to iterate through the ethernet devices

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:05:53 -06:00
Ben Warren
25a859066b Moved initialization of PPC4xx EMAC to cpu_eth_init()
Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
2008-11-09 21:38:05 -08:00
Ben Warren
96e21f86e8 Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
2008-11-09 21:38:04 -08:00
Ben Warren
9eb79bd885 Moved initialization of MPC8XX SCC to cpu_eth_init()
Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09 21:38:03 -08:00
Ben Warren
a9bec96d63 Moved initialization of MPC8220 FEC to cpu_eth_init()
Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09 21:38:03 -08:00
Ben Warren
0e8454e990 Moved initialization of QE Ethernet controller to cpu_eth_init()
Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09 21:38:03 -08:00
Ben Warren
3456a14827 Moved initialization of FCC Ethernet controller to cpu_eth_init
Affected boards:
    Several MPC8xx boards
    Several MPC8260/MPC8272 boards
    Several MPC85xx boards

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09 21:38:02 -08:00
Shinya Kuribayashi
5dfb3ee3f5 net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
as a part of ongoing eth_initialize cleanup work.  The function ret value
is also fixed as it should be negative on fail.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09 21:38:02 -08:00
Ben Warren
cc94074eca Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
Also, removed the driver initialization from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-11-09 21:38:02 -08:00
richardretanubun
c68a05feeb Adds two more ethernet interface to 83xx
Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
Six eth interface is chosen because the platform I am using combines
UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.

Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-10-18 21:54:00 +02:00
Ben Warren
10efa024b8 Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
Affected boards:
	db64360
	db64460
	katmai
	taihu
	taishan
	yucca
	cpc45
	cpu87
	eXalion
	elppc
	debris
	kvme080
	mpc8315erdb
	integratorap
	ixdp425
	oxc
	pm826
	pm828
	pm854
	pm856
	ppmc7xx
	sc3
	sc520_spunk
	sorcery
	tqm8272
	tqm85xx
	utx8245

Removed initialization of the driver from net/eth.c
Also, wrapped contents of pci_eth_init() by CONFIG_PCI.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:19 -07:00
Ben Warren
8ca0b3f99c Moved initialization of TULIP Ethernet controller to board_eth_init()
Affected boards:
	cu824
	bab7xx
	adciop
	dasa_sim
	mousse
	mpc8540eval
	musenki
	mvblue
	pcippc2/pcippc6
	sbc8240
	stxssa

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:18 -07:00
Ben Warren
ad3381cf41 Moved initialization of E1000 Ethernet controller to board_eth_init()
Affected boards:
	ap1000
	mvbc_p
	PM854

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:18 -07:00
Ben Warren
4fce2aceaf Moved initialization of plb2800 Ethernet driver to board_eth_init
Affected boards:
	purple

Removed initialization of controller from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:18 -07:00
Ben Warren
e1d7480b5d Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
Modified board_eth_init() functions of boards that have this FEC in addition
to other Ethernet controllers.

Affected boards:
	bc3450
	icecube
	mvbc_p
	o2dnt
	pm520
	total5200
	tq5200

Removed initialization of controller from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:18 -07:00
Ben Warren
a0aad08f94 Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
Added a cpu_eth_init() function to MPC512x CPU directory and
removed code from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:17 -07:00
Ben Warren
8218bd2aa6 Moved initialization of IncaIP Ethernet controller to board_eth_init
Affected boards:
	IncaIP

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:17 -07:00
Ben Warren
164846eeb2 Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
Affected boards:
        AmigaOneG3SE

    Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:17 -07:00
Ben Warren
6aca145e06 Moved initialization of GT6426x Ethernet controller to board_eth_init()
Affected boards:
	EVB64260
	P3G4
	ZUMA

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:17 -07:00
Ben Warren
e3090534d6 Moved initialization of PCNET Ethernet controller to board_eth_init()
Affected boards:
	PN62
	sc520_cdp

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:17 -07:00
Ben Warren
b902b8dda5 Moved initialization of NATSEMI Ethernet controller to board_eth_init()
Affected boards:
	a3000

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:17 -07:00
Ben Warren
19403633dd Moved initialization of NS8382X Ethernet controller to board_eth_init()
Affected boards:
	bc3450
	cpci5200
	mecp5200
	pf2000
	icecube
	o2dnt
	pm520
	sandpoint8245
	total5200
	tqm5200

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Ben Warren
ccdd12f83e Moved initialization of TSI108 Ethernet controller to board_eth_init()
Affected boards:
	mpc7448hpc2

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Ben Warren
0b252f50ae Moved initialization of RTL8139 Ethernet controller to board_eth_init()
Affected boards:
	hidden_dragon
	MPC8544DS
	MPC8610HPCN
	R2DPLUS
	TB0229

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Ben Warren
02d69891d9 Moved initialization of RTL8169 Ethernet controller to board_eth_init()
Affected boards:
	linkstation
	r7780mp

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Ben Warren
3ae071e442 Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
Removed at91sam9_eth_initialize() from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Jean-Christophe PLAGNIOL-VILLARD
d6e04258be davinci: fix remaining dm644x_eth
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-31 04:45:42 +02:00
Sandeep Paulraj
fcaac589a6 ARM DaVinci: Changing function names for EMAC driver
DM644x is just one of a series of DaVinci chips that use the EMAC driver.
By replacing all the function names that start with dm644x_* to davinci_*
we make these function more portable. I have tested this change on my EVM.
DM6467 is another DaVinci SOC which uses the EMAC driver and i will
be sending patches that add DaVinci DM6467 support to the list soon.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2008-08-31 00:39:46 +02:00
Ben Warren
6a00217109 Moved initialization of SKGE Ethernet driver to board code.
The only board using this driver is the SL8245 board.
Removed initialization for the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 22:18:08 -07:00
Ben Warren
65d3d99c28 Moved initialization of ULI526X Ethernet driver to board code.
The only board using this driver is the Freescale MPC8610HPCD board.
Removed initialization for the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 22:17:45 -07:00
Ben Warren
914947313a Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
Added board_eth_init() function to bf537-stamp board.
Removed initialization for the Blackin EMAC driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 22:17:36 -07:00
Ben Warren
fc363ce354 Moved initialization of GRETH Ethernet driver to CPU directory
Added a cpu_eth_init() function to leon2/leon3 CPU directories and
removed code from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 22:17:24 -07:00
Ben Warren
86882b8077 Moved initialization of MCFFEC Ethernet driver to CPU directory
Added a cpu_eth_init() function to coldfire CPU directories and
removed code from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 22:16:25 -07:00
Ben Warren
b31da88b9c Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
removed code from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 22:12:36 -07:00
Ben Warren
c8c845cfdc Moved initialization of AVR32 Ethernet controllers to board_eth_init()
Renamed initialization functions for atngw100 and atstk1000.
Removed initializations for these boards from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-24 12:37:26 +02:00