Commit Graph

184 Commits

Author SHA1 Message Date
Jean-Jacques Hiblot
139f7b1ded disk: Fixed capacity message
With capacities getting bigger, we can see see messages with negative
numbers like "Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)".
Here the printed LBA is -387938128 when it should have been 3907029168.
To fix this, use the right format when displaying the unsigned integers.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reported-by: Yan Liu <yan-liu@ti.com>
2016-12-27 11:24:18 -05:00
Petr Kulhavy
da2ee24d91 disk: part: refactor generic name creation for DOS and ISO
In both DOS and ISO partition tables the same code to create partition name
like "hda1" was repeated.

Code moved to into a new function part_set_generic_name() in part.c and optimized.
Added recognition of MMC and SD types, name is like "mmcsda1".

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-01 20:04:56 -04:00
Petr Kulhavy
b6dd69a4d6 fastboot: add support for writing MBR
Add special target "mbr" (otherwise configurable via CONFIG_FASTBOOT_MBR_NAME)
to write MBR partition table.
Partitions are now searched using the generic function which finds any
partiiton by name. For MBR the partition names hda1, sda1, etc. are used.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-01 20:04:51 -04:00
Petr Kulhavy
87b8530fe2 disk: part: implement generic function part_get_info_by_name()
So far partition search by name has been supported only on the EFI partition
table. This patch extends the search to all partition tables.

Rename part_get_info_efi_by_name() to part_get_info_by_name(), move it from
part_efi.c into part.c and make it a generic function which traverses all part
drivers and searches all partitions (in the order given by the linked list).

For this a new variable struct part_driver.max_entries is added, which limits
the number of partitions searched. For EFI this was GPT_ENTRY_NUMBERS.
Similarly the limit is defined for DOS, ISO, MAC and AMIGA partition tables.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
2016-10-01 20:04:45 -04:00
Kever Yang
c2fdd34569 cmd: gpt: fix the wrong size parse for the last partition
The calculation of "dev_desc->lba - 34  - 1 - offset" is not correct for
size '-', because both fist_usable_lba and last_usable_lba will remain
34 sectors.

We can simply use 0 for size '-' because the part_efi module will decode
the size and auto extend the size to maximum available size.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-08-05 20:55:16 -04:00
Simon Glass
5afb8d151f part_efi: Fix compiler warning on 32-bit sandbox
This fixes a mismatch between the %zu format and the type used on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-25 12:05:54 -04:00
Alexander Graf
28f0014bde iso: Fix part info command
Partitions on the iso el torito partition table interpreter
only start from partition 1. So when printing out the tables,
let's also start counting at 1.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-07-22 14:46:19 -04:00
Patrick Delaunay
a565386762 disk: part_efi: fix check of the max partition size
the last value acceptable value for offset is last_usable_lba + 1
and not last_usable_lba - 1

issue found with SDCARD partition commands on u-boot 2015.10
but this part of code don't change

1- create GPT partion on all the card
  > gpt write mmc 0 name=test,start=0,size=0
  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fde       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     b710eb04-45b9-e94a-8d0b-21458d596f54

=> Start = 0x22*512 = 0x4400
=> Size = (0x003a9fde-0x22+1) * 512  = 0x753F7A00

2- try to recreate the same partition with the next command
   (block size:512 bytes = 0x200)

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7A00
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7800
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7600
    Writing GPT: success!

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fdc       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     36ec30ef-7ca4-cd48-97cd-ea9fb95185d0

the max LBA when the size is indicated (0x003a9fdc) is lower than
when u-boot compute the max allowed value with size=0 (0x003a9fde)

in the code :

     /* partition ending lba */
     if ((i == parts - 1) && (partitions[i].size == 0))
		/* extend the last partition to maximuim */
		gpt_e[i].ending_lba = gpt_h->last_usable_lba;
     else
		gpt_e[i].ending_lba = cpu_to_le64(offset - 1);

so offset = gpt_h->last_usable_lba + 1 is acceptable !
but the test (offset >= last_usable_lba) cause the error

END

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>disk: part_efi: fix check of the max partition size
the last value acceptable value for offset is (last_usable_lba + 1)
and not (last_usable_lba - 1)

issue found with SDCARD partition commands on u-boot 2015.10
but this part of code don't change

1- I create GPT partion on all the card (start and size undefined)

  > gpt write mmc 0 name=test,start=0,size=0
  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fde       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     b710eb04-45b9-e94a-8d0b-21458d596f54

=> Start = 0x22*512 = 0x4400
=> Size = (0x003a9fde-0x22+1) * 512  = 0x753F7A00

2- I try to recreate the same partition with the command gpt write
   and with start and size values (block size:512 bytes = 0x200)

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7A00
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7800
    Writing GPT: Partitions layout exceds disk size

  > gpt write mmc 0 name=test,start=0x4400,size=0x753F7600
    Writing GPT: success!

  I check the partition created :

  > part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part      Start LBA          End LBA                       Name
            Attributes
            Type GUID
            Partition GUID
  1        0x00000022       0x003a9fdc       "test"
            attrs:     0x0000000000000000
            type:     ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
            type:     data
            guid:     36ec30ef-7ca4-cd48-97cd-ea9fb95185d0

=> but the max LBA when the size is indicated (0x003a9fdc) is lower than
   when u-boot compute the max allowed value with size=0 (0x003a9fde)

3- in the code, just after my patch, line 446

     /* partition ending lba */
     if ((i == parts - 1) && (partitions[i].size == 0))
		/* extend the last partition to maximuim */
		gpt_e[i].ending_lba = gpt_h->last_usable_lba;
     else
		gpt_e[i].ending_lba = cpu_to_le64(offset - 1);

  so offset = gpt_h->last_usable_lba + 1 is acceptable !
  (it the value used when size is 0)

  but today the test (offset >= last_usable_lba) cause the error
  my patch only solve this issue

END

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2016-05-27 10:01:07 -04:00
Simon Glass
1598dfcb10 dm: blk: Use the correct error code for blk_get_device_by_str()
Return -EINVAL instead of -1 in this function, to provide a more meaningful
error.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
6dd9faf8f9 dm: part: Drop the block_drvr table
This is not needed since we can use the functions provided by the legacy
block device support.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
1fde473da7 dm: part: Use the legacy block driver for hardware partition support
Drop use of the table in part.c for this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
f1d86fd3b1 dm: sandbox: Drop the host_get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
f6d000edbe dm: systemace: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
4e7189d4d8 dm: sata: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

We cannot yet make sata_dev_desc[] private to common/sata.c as it is used by
the SATA drivers. This will require the SATA interface to be reworked.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
edd82ab354 dm: scsi: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
3c457f4d2e dm: mmc: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
74001a2570 dm: ide: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
57ebf67bad dm: usb: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
a6331fa83c dm: disk: Use legacy block driver info for block device access
Instead of calling xx_get_dev() functions for each interface type, use the
new legacy block driver which can provide the device through its interface.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
c649e3c91c dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI
This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Alexander Graf
a2adb173ec iso: Allow 512 byte sector size
Real CD-ROMs are pretty obsolete these days. Usually people still keep
iso files around, but just put them on USB sticks or SD cards and expect
them to "just work".

To support this use case with El Torito images, add support for 512 byte
sector size to the iso parsing code.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:35 -04:00
Alexander Graf
2579c67478 iso: Start with partition 1
The generic partition code treats partition 0 as "whole disk". So
we should start with partition 1 as the first partition in the iso
partition table.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:34 -04:00
Alexander Graf
ef9e6de540 iso: Make little endian and 64bit safe
The iso partition table implementation has a few endian and 64bit
problems. Clean it up a bit to become endian and bitness safe.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:33 -04:00
Nishanth Menon
2ae67aec5e dm: part: fix missing driver name in debug print
Fixes the following warning with PART_DEBUG enabled:
disk/part.c: In function ‘get_partition_info’:
disk/part.c:372:3: warning: format ‘%s’ expects a matching ‘char *’ argument [-Wformat]

Signed-off-by: Nishanth Menon <nm@ti.com>
2016-04-14 11:51:39 -06:00
Eric Nelson
e40cf34a29 drivers: block: add block device cache
Add a block device cache to speed up repeated reads of block devices by
various filesystems.

This small amount of cache can dramatically speed up filesystem
operations by skipping repeated reads of common areas of a block
device (typically directory structures).

This has shown to have some benefit on FAT filesystem operations of
loading a kernel and RAM disk, but more dramatic benefits on ext4
filesystems when the kernel and/or RAM disk are spread across
multiple extent header structures as described in commit fc0fc50.

The cache is implemented through a minimal list (block_cache) maintained
in most-recently-used order and count of the current number of entries
(cache_count). It uses a maximum block count setting to prevent copies
of large block reads and an upper bound on the number of cached areas.

The maximum number of entries in the cache defaults to 32 and the maximum
number of blocks per cache entry has a default of 2, which has shown to
produce the best results on testing of ext4 and FAT filesystems.

The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows
changing these values and can be used to tune for a particular filesystem
layout.

Signed-off-by: Eric Nelson <eric@nelint.com>
2016-04-01 17:18:27 -04:00
Simon Glass
4708a07c7c part_efi: Drop NULL check in part_get_info_efi()
This cannot be NULL since part_get_info() calls this function and requires
it to be non-NULL.

Reported-by: Coverity (CID: 138497)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:19 -04:00
Simon Glass
5f095f0c7a part_efi: Drop the NULL check on dev_desc in part_print_efi()
This cannot be NULL since part_print() calls this function and requires it
to be non-NULL.

Reported-by: Coverity (CID: 138498)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:19 -04:00
Simon Glass
0919228cf4 part_iso: Drop the customer unaligned access functions
One of these is causing a coverity warning. Drop these functions and use the
standard U-Boot ones instead.

Reported-by: Coverity (CID: 138499)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:18 -04:00
Alexander Graf
d96a98045a disk/part.c: Expose list of available block drivers
We have a pretty nice and generic interface to ask for a specific block
device. However, that one is still based around the magic notion that
we know the driver name.

In order to be able to write fully generic disk access code, expose the
currently internal list to other source files so that they can scan through
all available block drivers.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-03-15 15:19:22 -04:00
Simon Glass
084bf4c244 part: Rename test_part_xx() and print_part_xx()
Rename these functions so that part_ is at the start. This more clearly
identifies these functions as partition functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 15:34:50 -06:00
Simon Glass
2a981dc2c6 dm: block: Adjust device calls to go through helpers function
To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.

Use inline functions to avoid increasing code size on some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
bcce53d048 dm: block: Rename device number member dev to devnum
This is a device number, and we want to use 'dev' to mean a driver model
device. Rename the member.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
3e8bd46950 dm: part: Rename some partition functions
Rename three partition functions so that they start with part_. This makes
it clear what they relate to.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
96e5b03c8a dm: part: Convert partition API use to linker lists
We can use linker lists instead of explicitly declaring each function.
This makes the code shorter by avoiding switch() statements and lots of
header file declarations.

While this does clean up the code it introduces a few code issues with SPL.
SPL never needs to print partition information since this all happens from
commands. SPL mostly doesn't need to obtain information about a partition
either, except in a few cases. Add these cases so that the code will be
dropped from each partition driver when not needed. This avoids code bloat.

I think this is still a win, since it is not a bad thing to be explicit
about which features are used in SPL. But others may like to weigh in.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
95a6f9dfcb dm: part: Add a cast to avoid a compiler warning
In part_amiga.c the name is unsigned but bcpl_strcpy() requires a signed
pointer. Add a cast to fix the warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
e35929e4a1 dm: blk: Rename get_device_and_partition()
Rename this function to blk_get_device_part_str(). This is a better name
because it makes it clear that the function returns a block device and
parses a string.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
ebac37cfbf dm: blk: Rename get_device() to blk_get_device_by_str()
The current name is too generic. The function returns a block device based
on a provided string. Rename it to aid searching and make its purpose
clearer. Also add a few comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
db1d9e78e6 dm: blk: Rename get_dev() to blk_get_dev()
The current name is too generic. Add a 'blk_' prefix to aid searching and
make its purpose clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
f8d6165d4b dm: part: Correct a sandbox build warning
Adjust the cast to avoid a warning when stdint.h is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
4101f68792 dm: Drop the block_dev_desc_t typedef
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Erik Tideman
99e7fc8a26 mmc: emmc and hw partitions partition table id bugfix.
On bootup the emmc's hw partition is always set to 0 and the partition
table is read from it. When switching to another hw partition the
partition table's id is not updated but instead the old one from
hw partition 0 is used. If there is no partition table on hw partition 0
then the code will terminate and return error even if the desired hw
partition contains a perfectly fine partition table. This fix updates
the partition table struct to correspond to the specified hw partition
before testing if the partition table is valid or not.

Signed-off-by: Erik Tideman <erik.tideman@faltcom.se>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Squash the patch that corrected whitespace in the original into
this one, wrap with HAVE_BLOCK_DEVICE test]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-20 10:19:19 -05:00
Ben Whitten
192bc6948b Fix GCC format-security errors and convert sprintfs.
With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14 22:11:34 -05:00
Stephen Warren
7c4213f6a5 block: pass block dev not num to read/write/erase()
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:18 -05:00
Stefan Monnier
d29892ba85 part_dos.c: Don't wrap to negative after 2G sectors
In order to support large IDE disks we need to make certain types be
lbaint_t now.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Stefan Monnier <monnier@iro.umontreal.ca>
2016-01-13 16:33:20 -05:00
Patrick Delaunay
cfdaf4caa2 part:efi: add bootable parameter in gpt command
The optional parameter bootable is added in gpt command to set the
partition attribute flag "Legacy BIOS bootable"

This flag is used in extlinux and so in with distro to select
the boot partition where is located the configuration file
(please check out doc/README.distro for details).

With this parameter, U-Boot can be used to create the boot partition
needed for device using distro.

example of use:

setenv partitions "name=u-boot,size=60MiB;name=boot,size=60Mib,bootable;\
                   name=rootfs,size=0"

> gpt write mmc 0 $partitions

> part list mmc 0

Partition Map for MMC device 0  --   Partition Type: EFI

Part	Start LBA	End LBA		Name
	Attributes
	Type GUID
	Partition GUID
  1	0x00000022	0x0001e021	"u-boot"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	cceb0b18-39cb-d547-9db7-03b405fa77d4
  2	0x0001e022	0x0003c021	"boot"
	attrs:	0x0000000000000004
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	d4981a2b-0478-544e-9607-7fd3c651068d
  3	0x0003c022	0x003a9fde	"rootfs"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	6d6c9a36-e919-264d-a9ee-bd00379686c7

> part list mmc 0 -bootable devplist

> printenv devplist

devplist=2

Then the distro scripts will search extlinux in partition 2
and not in the first partition.

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2015-11-23 11:01:52 -05:00
Lukasz Majewski
cef68bf904 gpt: part: Definition and declaration of GPT verification functions
This commit provides definition and declaration of GPT verification
functions - namely gpt_verify_headers() and gpt_verify_partitions().
The former is used to only check CRC32 of GPT's header and PTEs.
The latter examines each partition entry and compare attributes such as:
name, start offset and size with ones provided at '$partitions' env
variable.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-11-23 11:01:50 -05:00
Patrick Delaunay
bcb41dcaef uuid: add selection by string for known partition type GUID
short strings can be used in type parameter of gpt command
to replace the guid string for the types known by u-boot

      partitions = name=boot,size=0x6bc00,type=data; \
                   name=root,size=0x7538ba00,type=linux;
      gpt write mmc 0 $partitions

and they are also used to display the type of partition
in "part list" command

  Partition Map for MMC device 0  --   Partition Type: EFI

  Part	Start LBA	End LBA		Name
	Attributes
	Type GUID
	Partition GUID
    1	0x00000022	0x0000037f	"boot"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	type:	data
	guid:	d117f98e-6f2c-d04b-a5b2-331a19f91cb2
    2	0x00000380	0x003a9fdc	"root"
	attrs:	0x0000000000000000
	type:	0fc63daf-8483-4772-8e79-3d69d8477de4
	type:	linux
	guid:	25718777-d0ad-7443-9e60-02cb591c9737

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2015-11-12 15:58:58 -05:00
Patrick Delaunay
7561b258a1 gpt: add optional parameter type in gpt command
code under flag CONFIG_PARTITION_TYPE_GUID
add parameter "type" to select partition type guid

example of use with gpt command :

  partitions = uuid_disk=${uuid_gpt_disk}; \
      name=boot,size=0x6bc00,uuid=${uuid_gpt_boot}; \
      name=root,size=0x7538ba00,uuid=${uuid_gpt_root}, \
         type=0fc63daf-8483-4772-8e79-3d69d8477de4;

  gpt write mmc 0 $partitions

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2015-11-12 15:58:58 -05:00
Hans de Goede
251cee0db2 ubifs: Add generic fs support
Add generic fs support, so that commands like ls, load and test -e can be
used on ubifs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-10-24 13:50:32 -04:00
Hans de Goede
afc1744ec8 disk/part: Only build hostfs special handling when CONFIG_SANDBOX is set
This is not necessary / useful when not building with CONFIG_SANDBOX and
with the addition of ubifs support to the generic fs commands it actually
gets in the way, since both operate on a fake / NULL blkdev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2015-10-24 13:50:31 -04:00