Commit Graph

5389 Commits

Author SHA1 Message Date
Tom Rini
bdc3ff6e4f Merge branch 'master' of git://www.denx.de/git/u-boot-mmc 2012-10-22 16:53:19 -07:00
Ashok
860bde3fee omap2424:Rename CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 as CONFIG_DRIVER_LAN91C96 is obsolete.
Rename CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C9 as
CONFIG_DRIVER_LAN91C96 is obsolete.

Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
2012-10-22 08:31:57 -07:00
Marek Vasut
8b493a5236 common: Discard the __u_boot_cmd section
The command declaration now uses the new LG-array method to generate
list of commands. Thus the __u_boot_cmd section is now superseded and
redundant and therefore can be removed. Also, remove externed symbols
associated with this section from include/command.h .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Marek Vasut
556751427b common: Add .u_boot_list into all linker files
Add section for the linker-generated lists into all possible linker
files, so that everyone can easily use these lists. This is mostly
a mechanical adjustment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Marek Vasut
831f849f79 mmc: pxa: Flip over the remaining boards to pxa_mmc_generic
Some of the boards still used the old PXA_MMC driver instead of the
new generic one. Use the new one instead so the old can be removed
and the generic MMC framework can be properly used.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andy Fleming <afleming@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 02:56:25 -05:00
Tom Rini
99070db0dc Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	drivers/serial/serial_lh7a40x.c

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 18:23:38 -07:00
Jason Jin
87c9b18687 ColdFire: Fix the build error for Freescale m5282evb board.
Clean up the lds file and fix the environment build error.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-19 23:52:09 +08:00
Jason Jin
fa862dd7ce ColdFire: Fix build error for astro mcf53731 board.
Fix the  build error by clean up the lds file.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-19 23:52:04 +08:00
Tom Rini
1fb187b3b8 actux[123]: Update linker script for ELDK 4.2
With ELDK4.2 libserial.o is too large to fit in the area before the
environment.  Swap in libinput instead which is a little smaller.

Cc: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-18 23:15:34 +02:00
Paul Gortmaker
12c79a9578 powerpc: delete Wind River SBC8560/8540 support
The sbc8548/60 (both similar, just variations in UART hardware)
support has been removed from the linux kernel as of v3.6-rc1~132
so lets also now remove it from the u-boot tree as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-10-17 09:39:16 -07:00
Tom Rini
953cfd2878 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2012-10-17 09:03:59 -07:00
Tom Rini
d1ff690612 Merge branch 'master' of git://git.denx.de/u-boot-mips 2012-10-17 08:57:13 -07:00
Pavel Herrmann
21d2bf426f split PCS440EP specific code from cmd_ide.c
Move specific ide_input_data and friends to board-specific file.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:09 -07:00
Pavel Herrmann
0a4a64c079 move CPC45 ide_led to the same file as other IDE hooks
Keep all IDE-related hooks and overrides in a single file, to avoid confusion

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:09 -07:00
Pavel Herrmann
28920b1fd2 split CPC45 board-specific IDE functions from cmd_ide.c
Move input_data() and friends to board/cpc45/ide.c, as overrides for weak
aliases in cmd_ide.c

note: checkpatch emits warnings about using volatile

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Pavel Herrmann
f5b82c0f9c change all versions of input_data() and output_data() to global weak aliases
This changes input_data() and friends from static function to global symbols
under weak alias, to enable board specific overrides (and therefore get rid of
board-specific code in cmd_ide.c)
Also declare ide_bus_offset in the header file, so other files can use
ATA_CURR_BASE as well.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Pavel Herrmann
e4148c1165 split IVM power hooks from cmd_ide.c
Move power control code from ide_reset() into IVM-specific IDE reset code.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-17 07:59:08 -07:00
Marek Vasut
ec3fd68952 serial: Use default_serial_puts() in drivers
Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:55:50 -07:00
Stefan Roese
bfa5b71408 mpc82xx: Remove BMW board port
As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: James F. Dougherty <jfd@broadcom.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-17 07:55:50 -07:00
Zhi-zhou Zhang
32afad783e MIPS: add board qemu-mips64 support
Both big-endian and little-endian are tested with below commands:
Rom version: (Default, Now we config it as rom version)
qemu-system-mips64el -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
qemu-system-mips64 -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
Ram version:
qemu-system-mips64el -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic
qemu-system-mips64 -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic

Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2012-10-16 15:02:08 +02:00
Zhi-zhou Zhang
ff9b0cb8b4 MIPS: qemu_mips: move CONFIG_SYS_TEXT_BASE to qemu-mips.h
We define CONFIG_SYS_TEXT_BASE in board's specified header file.
So config.mk is useless, then remove it.

Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>
2012-10-16 15:02:08 +02:00
Łukasz Dałek
34cda7a0d8 h2200: Add support for iPAQ h2200 palmtop
Add basic support for HP iPAQ h2200 palmtop. h2200 palmtop was targeted
to general consumers. It has 64 MB of RAM, 32 MB flash. No intergrated
Wi-Fi nor Ethernet. Based on Intel PXA255 processor. It was shipped with
Windows CE 4.2 operating system.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-16 07:14:55 +02:00
Tetsuyuki Kobayashi
650f95b0c7 arm: rmobile: kzm9g: enable I2C2
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:21 +02:00
Tetsuyuki Kobayashi
937b6862de arm: rmobile: kzm9g: enable I2C1
Supply clock to I2C1 and release resetting.

Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:20 +02:00
Fabio Estevam
fe5ebe97fa mx6qsabreauto: Add Ethernet support
mx6qsabreauto has a AR8031 Gigabit PHY.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:14 -07:00
Benoît Thébaudeau
85d993cef9 mx25: Clean up lowlevel_init
Clean up mx25 lowlevel_init:
 - Add comments.
 - Do not use write32 repeatedly with the same value in order not to increase
   code size.
 - Make register values configurable.
 - Use macro parameters with default values instead of literal constants.
 - Use defined macros instead of duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
Cc: Matthias Weisser <weisserm@arcor.de>
2012-10-15 11:54:14 -07:00
Benoît Thébaudeau
9e0081d573 mx31: Fix PDR0_CSI_PODF
The CSI PODF bit-field used by the previous code for the i.MX31 CCM PDR0
register is actually composed of two bit-fields: one pre-divider and one
post-divider. This patch fixes the CCM access macros and the code using them
accordingly.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:14 -07:00
Benoît Thébaudeau
833b6435de mx5/6: Define default SoC input clock frequencies
Define default SoC input clock frequencies for i.MX5/6 in order to get rid of
duplicated definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Jason Liu <r64343@freescale.com>
Cc: Matt Sealey <matt@genesi-usa.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:10 -07:00
Fabio Estevam
7dd6545da7 mx6q: Add basic support for mx6qsabreauto
mx6qsabreauto is a board based on mx6q SoC with the following features:
- 2GB of DDR3
- 2 USB ports
- 1 HDMI output port
- SPI NOR
- 2 LVDS LCD ports
- Gigabit Ethernet
- Camera
- eMMC and SD card slot
- Multichannel Audio
- CAN
- SATA
- NAND
- PCIE
- Video Input

Add very basic support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:09 -07:00
Fabio Estevam
e72d617860 mx6qsabresd: Add 8-bit USDHC support
USDHC3 has 8 pins wired in mx6qsabresd. Configure the extra pins.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:08 -07:00
Fabio Estevam
a0d21fc01a mx6qsabresd: Add Ethernet support
mx6qsabresd has a AR8031 Gigabit PHY.

Add support for it.

Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail.

Tested on 1Gbp and 100Mbps networks.

Suggested-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15 11:54:08 -07:00
Fabio Estevam
7891e258d4 mx6: Add basic support for mx6qsabresd board.
mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- Audio

Add very basic support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:08 -07:00
Fabio Estevam
af7ec0b058 mx6q: Factor out common DDR3 init code
Factor out common DDR3 initialization code, allowing easier maintainance of such
scripts.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:08 -07:00
Lucas Stach
c0720afbb5 tegra: nand: add board pinmux
Boards may require a different pinmux setup for NAND than the default one.
Add a way to call into board specific code to set this up.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:07 -07:00
Lucas Stach
516f00b324 tegra: clean up board include hell
The prototypes used in board files were all scattered out, which lead to
code duplication between SPL and normal U-Boot and some prototypes not actually
being used. Consolidate this in a common board header.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:07 -07:00
Lucas Stach
0cd10c7abf tegra20: rework UART GPIO handling
Rename board provided gpio_config_uart() to
gpio_early_init_uart() as it does the same thing as the equally
called function provided by the uart-switch code. This allows
to simply call this function in early board init whether or not
we are building with CONFIG_UART_SWITCH defined.

Also provide a weak symbol for this function, to avoid the
need to provide this function for boards that don't need any
fixup.

This patch supersedes the earlier posted
"tegra: convert gpio_config_uart to weak symbol".
Build tested with MAKEALL -s tegra20

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:07 -07:00
Tom Warren
150c24936b Tegra20: Move some include files to arch-tegra for sharing with Tegra30
The move is pretty straight-forward. ap20.h and tegra20.h were renamed to ap.h and tegra.h.
Some files remain in arch-tegra20 but 'include' a file in 'arch-tegra' with #defines & structs
that will be common between T20 and T30 HW. HW-specific #defines, etc. stay in the 'arch-tegra20'
'root' file.

All boards build OK w/MAKEALL -s tegra20. Checkpatch.pl runs clean. Seaboard works OK.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Thierry Reding
66b796a560 tegra: Rename Medcom to Medcom-Wide
Medcom is the marketing name for an older, PXA-based version of the same
device. In order to avoid confusion, rename the Tegra-based version to
the new marketing name.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Thierry Reding
b9ce38ef29 tegra: Update Avionic Design vendor prefix
The official vendor prefix for Avionic Design is now "ad". Update the
board DTS files accordingly.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Lucas Stach
676ae068d9 usb: ehci: rework to take advantage of new lowlevel interface
Kill off ehci-core.h
It was used to specify some static controller data. To support more than
one controller being active at any time we have to carry the controller
data ourselfes. Change the ehci interface accordingly.

NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed
to do the same thing as other platforms. But the change for now is at least
compile clean.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
c7e3b2b586 usb: lowlevel interface change to support multiple controllers
Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct from lowlevel_init to the
creation of the root usb device of this controller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Igor Grinberg
5527efe501 pmc405de and zeus: remove the env_ptr externs
The env_ptr is already declared in environment.h, so there is no need to
redeclare in board files (especially after including the environment.h)
Remove those declarations.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
2012-10-15 11:54:00 -07:00
Stefan Roese
a821d08dca ppc4xx: Remove AP1000 board support
As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: James MacAulay <james.macaulay@amirix.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-15 11:53:59 -07:00
Stefan Roese
dee9c534db ppc4xx: Remove ML2 board support
As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Peter De Schrijver <p2@mind.be>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-15 11:53:59 -07:00
Marek Vasut
a382725060 serial: Remove CONFIG_SERIAL_MULTI from serial drivers
Remove the support for not-CONFIG_SERIAL_MULTI part from serial
port drivers and some board files. Since CONFIG_SERIAL_MULTI is
now enabled by default, that part is a dead code. Remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:58 -07:00
Marek Vasut
088a4f3cdf serial: powerpc: Implement CONFIG_SERIAL_MULTI into p3mx serial driver
Implement support for CONFIG_SERIAL_MULTI into p3mx serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the p3mx driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:53 -07:00
Marek Vasut
26d8eaaa48 serial: powerpc: Implement CONFIG_SERIAL_MULTI into sconsole serial driver
Implement support for CONFIG_SERIAL_MULTI into sconsole serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the sconsole driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:53 -07:00
Marek Vasut
d126f2850f serial: powerpc: Implement CONFIG_SERIAL_MULTI into ml2 serial driver
Implement support for CONFIG_SERIAL_MULTI into ml2 serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the ml2 driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:53 -07:00
Marek Vasut
829b3b2e88 serial: powerpc: Implement CONFIG_SERIAL_MULTI into evb64260 serial driver
Implement support for CONFIG_SERIAL_MULTI into evb64260 serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the evb64260 driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:53 -07:00
Marek Vasut
619c90bbeb serial: powerpc: Implement CONFIG_SERIAL_MULTI into cpci750 serial driver
Implement support for CONFIG_SERIAL_MULTI into cpci750 serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the cpci750 driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:53 -07:00