Commit Graph

18 Commits

Author SHA1 Message Date
Tim Harvey
74389c1387 imx: ventana: hexdump invalid EEPROM data
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-03-13 09:14:35 +01:00
Tim Harvey
9cdb1c6e99 imx: ventana: add support for GW5901/GW5902
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-02-15 22:01:15 +01:00
Tim Harvey
2285094ea9 imx: ventana: add support for GW5909
The GW5909 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW5904 but with half the DRAM loaded
and an additional RS232 transceiver off UART2.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-02-15 22:01:15 +01:00
Tim Harvey
ebe07ef754 imx: ventana: add support for GW5908
The GW5908 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW530x but with 1GiB density DRAM
(64bit 512MiB).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-02-15 22:01:15 +01:00
Tim Harvey
00606b51cc imx: ventana: add support for GW5907
The GW5907 is a small single board computer based on the i.MX6DL SoC
with the following peripheral set:
 - DDR3 memory (512MB default)
 - 1x GigE (i.MX6 FEC)
 - Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-02-15 22:01:15 +01:00
Tim Harvey
988916ad1b imx: ventana: add support for GW5906
The GW5906 is a GW552x with mechanical and power supply connector
differences.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-02-15 22:01:15 +01:00
Tim Harvey
d1c3867a08 imx: ventana: add support for GW5905
The GW5905 is single-board tablet computer based on the i.MX6 SoC with the
following peripheral set:
 - eMMC flash (boot device)
 - microSD expansion
 - LVDS display connector for off-board 3D+1C with PWM backlight
   and I2C based touch controller
 - MIPI camera connector supporting the TRULY CM8487-B500SA-E (OV5640)
 - ublox EMMY-W1 WiFi/Bluetooth/NFC module (SDIO/UART)
 - ublox ZOE-M8Q GPS
 - LSM9DS1 9-DOF IMU
 - 1x 1-lane miniPCIe socket with USB 2.0
 - Gateworks System Controller
 - Audio jack with TLV320AIC Audio Codec, Speaker AMP
   and TSA227E Headphone detect
 - MAX8607 3-mode LED camera flash
 - DECT ULE module
 - FUSB302 USB-C PD and ISL9238 Battery charger

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-02-15 22:01:15 +01:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
c10b1c43fd imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL
The command can only be used from full U-Boot, so do not build it into
SPL.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Tim Harvey
214fb19bcc imx: ventana: add GW5903 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20 19:10:50 +01:00
Tim Harvey
94a1d6c602 imx: ventana: add GW560x support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20 19:10:39 +01:00
Tim Harvey
8d1a6ff825 imx: ventana: add GW5904 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20 19:10:22 +01:00
Tim Harvey
385575bcb6 imx: ventana: add GW553x support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:12 +02:00
Tim Harvey
fe63fcb6ca imx: ventana: remove several EEPROM config bit dependence
Removed several EEPROM bit dependencies:
 - for dt aliases that don't exist and thus don't ever do anything
   (pcie,lvds1,uart*,vpu,csi*,hdmi_in,hdmi_out,cvbs_in,cvbs_out,gps)
 - for features that don't effect bus ordering or have no detrimental affect
   if erroneously enabled when not present (ahci,nand,i2c*)
 - for features that have little to no impact on being erroneously enabled
   but high impact if erroneously disabled (can*, spi*)
 - for features that have an high adverse affect of not being set when they
   should and no adverse affect of being set when they
   shouldn't (ipu*).

Removing these means the following:
 - these no longer are supported with the econfig command
 - these no longer affect the device-tree in any way

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:00 +02:00
Tim Harvey
75f21e3131 imx: ventana: Add support for GW551x
The GW551x is a small form factor board based on the IMX6 SoC that includes:
 * up to 512MB DDR3 memory
 * up to 2GB NAND flash
 * 1x miniPCIe socket (with USB)
 * HDMI out (micro-HDMI)
 * HDMI in (micro-HDMI)
 * TTL level I/O (supported by GW16111 breakout board):
  * I2C
  * 2x UART
  * CAN
  * 2x DIO (GPIO/PWM)
  * USB OTG

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:09 +02:00
Tim Harvey
3aa226740f imx: ventana: add GW5520 support
The GW5520 has an IMX6Q SoC with 512MB of DDR3, 256MB of NAND flash as well as:
 * 2x MiniPCIe sockets
 * 2x USB host sockets
 * 2x i210 GigE
 * HDMI out
 * digital I/O expansion

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 15:13:25 +02:00
Tim Harvey
9c0fe83eb5 imx: ventana: add econfig command
The Gateworks Ventana EEPROM contains a set of configuration bits that
affect the removal of device-tree nodes that support peripherals that do not
exist on sub-loaded boards. This patch adds:
 - a structure to define a config bit name, dt node alias, bit position
 - an array of supported configuration items
 - an econfig command to get/set/list configuration bits
 - use of the array when adjusting the FDT prior to boot

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:08:37 +02:00
Tim Harvey
1badf2f47c imx: ventana: split read_eeprom into standalone file
Split the read_eeprom function out so that it can be shared (ie with SPL)

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00