Commit Graph

481 Commits

Author SHA1 Message Date
Mike Frysinger
7b15e2bb9b linux/compat.h: rename from linux/mtd/compat.h
This lets us use it in more places than just mtd code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30 16:54:51 +02:00
Wolfgang Denk
1432c763f8 GCC4.6: Squash warnings in onenand_base.c
Fix gcc 4.6 build warnings:
onenand_base.c: In function 'onenand_probe':
onenand_base.c:2577:6: warning: variable 'maf_id' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2012-04-21 16:45:35 +02:00
Wolfgang Denk
db39f24151 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  ARM926EJS: Fix cache.c to comply with checkpatch.pl
  ARM926EJS: Make asm routines volatile in cache ops
  MX35: mx35pdk: wrong board revision
  ARM1136: MX35: Make asm routines volatile in cache ops
  ARM: add u-boot.imx as target for i.MX SOCs
  M28: Pull out CONFIG_APBH_DMA so it's always enabled
  DMA: Split the APBH DMA init into block and channel init
  imx: Return gpio_set_value in gpio_direction_output
  imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
  imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
  imx: Remove unneeded/repititive definitions from imx headers
  i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
  MX31: mx31pdk: drop enable_caches from board file
  i.MX28: Fix initial stack pointer position
  mx35: mx35pdk: fix when cache functions are linked
  mx35: flea3: fix when cache functions are linked
  ARM: 926ejs: use debug() for misaligned addresses
  ARM1136: add cache flush and invalidate operations
  mx6qsabrelite: Fix the serial console port
  mx6qsabrelite: Add boot switch setting information into the README
  i.MX6: mx6qsabrelite: add cache commands if cache is enabled
  i.MX6: implement enable_caches()
  i.MX6: define CACHELINE_SIZE
  MX53: DDR: Fix ZQHWCTRL field TZQ_CS
  mx28evk: Add a README file
  mx28: Split the README into a common part and a m28 specific part
  tricorder: Load kernel from ubifs
  tricorder: Add UBIFS
  cm-t35: fix Ethernet reset timing
  hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT
  BeagleBoard: Remove userbutton command and use gpio command instead
  OMAP: Move omap1510inn to Unmaintained / Orphaned
2012-04-16 23:01:12 +02:00
Marek Vasut
96666a39ae DMA: Split the APBH DMA init into block and channel init
This fixes the issue where mxs_dma_init() was called either twice or never,
without introducing any new init hooks.

The idea is to allow each and every device using the APBH DMA block to
configure and request only the channels it uses, instead of making it call init
for all the channels as is now.

The common DMA block init part, which only configures the block, is then called
from CPUs arch_cpu_init() call.

NOTE: This patch depends on:

	http://patchwork.ozlabs.org/patch/150957/

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-04-16 14:53:59 +02:00
Anatolij Gustschin
b64c2420e0 drivers/mtd/spr_smi.c: Fix build warning
Fix:
spr_smi.c: In function 'smi_write':
spr_smi.c:325:15: warning: variable 'WM' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Vipin Kumar <vipin.kumar@st.com>
2012-04-14 23:03:13 +02:00
Lukasz Majewski
e26fd3d3bf onenand: Replace ONENAND_IS_MLC() with ONENAND_HAS_4KB()
This replacement causes 4KB page size devices to work properly with u-boot.

The old ONENAND_IS_MLC() behavior has been preserved by explicit
setting of ONENAND_HAS_4KB_PAGE for those devices.

This change makes the onenand_base.c file more resembling the respective
kernel sources.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

---
Test HW:
       - Samsung S5PC110 GONI
       - Samsung S5PC210 Universal
2012-04-04 17:08:40 +02:00
Lukasz Majewski
6b3967bbbb onenand:samsung Target dependent OneNAND chip probe function
Separate callback for probing OneNAND memory chip.
If no special function is defined, default implementation will be used.

This approach gives more flexibility for OneNAND device probing.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-04-04 16:27:34 +02:00
Marek Vasut
6b9408edd3 i.MX28: Add cache support to MXS NAND driver
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-03-29 07:56:28 +02:00
Stefano Babic
f7dad8f121 NAND: TI: fix warnings in omap_gpmc.c
The following warnings are reported for boards using SOFT ECC.

omap_gpmc.c:33:30: warning: 'hw_nand_oob' defined but not used
omap_gpmc.c:78:13: warning: 'omap_hwecc_init' defined but not used
omap_gpmc.c:116:12: warning: 'omap_correct_data' defined but not used
omap_gpmc.c:182:12: warning: 'omap_calculate_ecc' defined but not used
omap_gpmc.c:208:13: warning: 'omap_enable_hwecc' defined but not used

Signed-off-by: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Scott Wood <scottwood@freescale.com>
2012-03-27 22:05:29 +02:00
Tao Hou
85c344e5f9 cfi: fix the incomplete erased status check in buffer write
Without the fix, flash_write_cfibuffer will terminate the erased
status check once an all-0xFF word has been found instead of
continuing the erased status check utill the first non-0xFF word.

Signed-off-by: Tao Hou <hotforest@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-03-21 16:25:33 +01:00
Prabhakar Kushwaha
5f720b8514 mtd/nand:Fix wrong usage of is_blank() in fsl_ifc_run_command
Freescale IFC NAND Machine calculates ECC on 512byte sector and same is used in
fsl_ifc_run_command() during ECC status verification. Also this sector is passed
to is_blank() for blank checking. It is wrong at first place because
is_blank()'s implementation checks for Page size and OOB area size.
is_blank() should be called per page for main and OOB area verification.

Variables name are redefined to avoid confusion between buffer and ecc sector.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-02-28 14:03:39 -06:00
Prabhakar Kushwaha
d90361285c mtd/nand: Fix IFC driver to support 2K NAND page
1) OOB area should be updated irrespective of NAND page size. Earlier it was
updated only for 512byte NAND page.

2) During OOB update fbcr should be equal to OOB size.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-02-28 14:03:39 -06:00
Scott Wood
fb49454b1b nand: reinstate lazy bad block scanning
commit 2a8e0fc8b3 ("nand: Merge changes
from Linux nand driver") accidentally reverted commit
13f0fd94e3 ("NAND: Scan bad blocks
lazily.").

Reinstate the change, as amended by commit
ff49ea8977 ("NAND: Mark the BBT as scanned
prior to calling scan_bbt.").

Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-02-28 14:03:39 -06:00
Scott Wood
1f7b1743d3 Revert "nand: make 1-bit software ECC configurable"
This reverts commit 4fee6c2f29.

It breaks boards that currently rely on soft-ecc, as pointed out here:
http://patchwork.ozlabs.org/patch/140872/

The reverted patch should be resubmitted with documentation, and with the
CONFIG_MTD_ECC_SOFT selected from every board that needs it.  We could
start by looking at what NAND driver the board selects, and whether
that driver ever asks for soft ECC.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-02-28 14:03:39 -06:00
Wolfgang Denk
e9d44b35be Merge branch 'sf' of git://git.denx.de/u-boot-blackfin
* 'sf' of git://git.denx.de/u-boot-blackfin:
  README: Add description of SPI Flash (SF) command configuration
  sf command: allow default bus and chip selects
  sf: eeprom_m95xxx: set a sane default timeout
  sf: eeprom_m95xxx: fix up style
2012-02-13 23:15:25 +01:00
Mike Frysinger
8b463dab93 sf: eeprom_m95xxx: set a sane default timeout
Every board currently defines this to the same value, so just default
to that to avoid having to make everyone do the same thing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:18:28 -05:00
Mike Frysinger
a1f77b696d sf: eeprom_m95xxx: fix up style
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:18:28 -05:00
Mike Frysinger
3f54108be9 Blackfin: bfin_nand: mark local func static
This devready func is only used in this driver, so mark it static.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:03:26 -05:00
Wolfgang Denk
7100a54604 Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
* 'master' of git://git.denx.de/u-boot-cfi-flash:
  add STM29F400BB to table of supported legacy flashs
  * Fix: watchdog timed out, if flash blank (0xFF) blocks
2012-02-11 22:16:47 +01:00
David Müller (ELSOFT AG)
5e72ef0810 add STM29F400BB to table of supported legacy flashs
Signed-off-by: David Mueller <d.mueller@elsoft.ch>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-02-09 09:45:53 +01:00
Jens Scharsig (BuS Elektronik)
a9f5faba6e * Fix: watchdog timed out, if flash blank (0xFF) blocks
The current implementation of cfi_flash uses udelay to reset watchdog.
If several blocks are blank (0xff filled) the watchdog timed out.
The reason is, udelay is never called, if flash device is ready to fast.

e.g.
     mw.w $(copy_addr) FFFF 10000;cp.b $(copy_addr) 10880000 20000

     -> watchdog timed out

     mw.w $(copy_addr) 0000 10000;cp.b $(copy_addr) 10880000 20000

     -> watchdog not timed out

This patch adds an extra watchdog reset in front of flash ready check.

Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-02-09 09:45:40 +01:00
Scott Wood
c178347492 nand/fsl_elbc: Convert to self-init
This driver doesn't yet make use of the added flexibility (not that that
should stop anyone from converting...), but it will with the in-progress
hack to support 4k-page NAND.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:06 -06:00
Scott Wood
578931b34d nand: Introduce CONFIG_SYS_NAND_SELF_INIT
This allows a driver to run code between nand_scan_ident() and
nand_scan_tail(), among other things.  See the additions to
doc/README.nand for details.

To allow a gradual transition, Boards that don't set
CONFIG_SYS_NAND_SELF_INIT will still be initialized the old way, but
new drivers should not require this, and existing drivers should be
converted when convenient.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:06 -06:00
Shengzhou Liu
80519c8334 mtd/nand: Add ONFI support for FSL NAND controller
- fix NAND_CMD_READID command for ONFI detect.
- add NAND_CMD_PARAM command to read the ONFI parameter page.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:03 -06:00
Christian Hitz
4fee6c2f29 nand: make 1-bit software ECC configurable
The software ECC algorithm is not necessary when hardware ECC
is available and can be left out for a smaller image size.
Enable with CONFIG_MTD_ECC_SOFT.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:02 -06:00
Christian Hitz
5454ddbc9b nand: Sanitize ONFI strings.
[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This is part of the synchronization with the nand driver to the
Linux 3.0 state.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:02 -06:00
Christian Hitz
ff8a8a7183 nand: Merge changes to BBT from Linux nand driver
[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch synchronizes the nand driver with the Linux 3.0 state.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:02 -06:00
Christian Hitz
2a8e0fc8b3 nand: Merge changes from Linux nand driver
[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch synchronizes the nand driver with the Linux 3.0 state.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
[scottwood@freescale.com: minor fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:02 -06:00
Christian Hitz
90e3f395bf nand: cleanup whitespace
Bring up to date with corresponding file from linux.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:02 -06:00
Christian Hitz
8c2d9c6862 nand: Add more NAND types from Linux nand driver
[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch merges the additional NAND flash types from the 3.0 Linux
kernel.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:02 -06:00
Christian Hitz
4c6de8560c nand: Merge BCH code from Linux nand driver
[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch merges the BCH ECC algorithm from the 3.0 Linux kernel.
This enables U-Boot to support modern NAND flash chips that
require more than 1-bit of ECC in software.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:09:02 -06:00
Stefano Babic
d3022c5f5c nand_spl_simple: store ecc data on the stack
Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
which is likely to contain already loaded data.
The patch saves the oob data and the ecc on the stack replacing
the fixed address in RAM.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Simon Schwarz <simonschwarzcor@googlemail.com>
CC: Wolfgang Denk <wd@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-01-26 16:06:21 -06:00
Christian Riesch
32b1127397 sf: Add spi_boot() to allow booting from SPI flash in an SPL
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Heiko Schocher <hs@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-24 10:23:30 +01:00
Anatolij Gustschin
b7fde587bf drivers/mtd/nand/nand_spl_load.c: Fix GCC 4.6 warning
Fix:
nand_spl_load.c: In function 'nand_boot':
nand_spl_load.c:31:6: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-12-07 16:02:07 -06:00
Anatolij Gustschin
18b89072f6 drivers/mtd/nand/nand_spl_simple.c: Fix GCC 4.6 warnings
Fix warnings for both cases:

definded CONFIG_SYS_NAND_HW_ECC_OOBFIRST:
nand_spl_simple.c: In function 'nand_read_page':
nand_spl_simple.c:156:6: warning: variable 'stat' set but not used
[-Wunused-but-set-variable]

not definded CONFIG_SYS_NAND_HW_ECC_OOBFIRST:
nand_spl_simple.c: In function 'nand_read_page':
nand_spl_simple.c:196:6: warning: variable 'stat' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-12-07 16:01:56 -06:00
Ilya Yanok
ff62fb4c6a omap_gpmc: use SOFTECC in SPL if it's enabled
Use software ECC for the SPL build if support for software ECC in SPL is
enabled.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Scott Wood <scottwood@freescale.com>
2011-12-06 23:59:36 +01:00
Ilya Yanok
1df308e5be nand_spl_simple: add support for software ECC
This patch adds support for software ECC to the nand_spl_simple driver.
To enable this one have to define CONFIG_SPL_NAND_SOFTECC.

Tested on OMAP3.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Scott Wood <scottwood@freescale.com>
2011-12-06 23:59:36 +01:00
Simon Schwarz
56c91bc3b6 Fix regression in SMDK6400
s3c64xx.c implemented its own nand_read_byte, nand_write_buf and
nand_read_buf functions. This provoked a regression when these functions
were made public by patch 55f429bb39614a16b1bacc9a8bea9ac01a60bfc8.

This deletes these duplicated functions from s3c64xx.c and adds the generic
implementations in nand_base.c to the spl Makefile. It also adds
-ffcuntion-sections and -gc-sections to the compilation flags of the SPL to
avoid errors originating from unused functions in nand_base.c.

Description of the regression:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/108873

Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Cc: scottwood@freescale.com
Cc: s-paulraj@ti.com
Cc: albert.u.boot@aribaud.net
2011-12-06 23:59:31 +01:00
Simon Schwarz
82645f816f nand: Add common functions to linux/mtd/nand.h
Functions often used in SPL are now part of linux/mtd/nand.h.
Static modifiers are removed from these functions in
drivers/mtd/nand/nand_base.c.

Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Cc: scottwood@freescale.com
Cc: s-paulraj@ti.com
Cc: albert.u.boot@aribaud.net
Acked-by: Scott Wood <scottwood@freescale.com>
2011-12-06 23:59:31 +01:00
Vadim Bendebury
1f6734cf50 sf: fix erase debug output
We want to show the length, so multiplying by sector size makes no sense.
This is a hold over from the erase code before the big refactor.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-05 21:55:24 +01:00
Stelian Pop
c9e798d35a Fix Stelian's email address
Change my old email address which is no longer valid.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-29 15:43:38 +01:00
Wolfgang Denk
fdbe8b9a2d Merge branch 'hs@denx.de' of git://git.denx.de/u-boot-staging
* 'hs@denx.de' of git://git.denx.de/u-boot-staging:
  drivers/net/dnet.c: Fix GCC 4.6 warnings
  board/xaeniax/flash.c: Fix GCC 4.6 warnings
  net/bootp.c: Fix GCC 4.6 warning
  common/cmd_bootm.c: Fix GCC 4.6 warnings
  board/mx1ads/mx1ads.c: Fix GCC 4.6 warning
  board/mx1ads/syncflash.c: Fix GCC 4.6 warnings
  board/lubbock/flash.c: Fix GCC 4.6 warnings
  drivers/net/cs8900.c: Fix GCC 4.6 warning
  arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings
  drivers/net/lan91c96.c: Fix GCC 4.6 warning
  board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning
  drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning
  drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
2011-11-23 21:23:45 +01:00
Anatolij Gustschin
67fad9f69d drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning
Fix:
samsung.c: In function 's3c_onenand_check_lock_status':
samsung.c:486:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23 08:14:27 +01:00
Anatolij Gustschin
eec3ae68ad drivers/mtd/dataflash.c: Fix GCC 4.6 warning
Fix:
dataflash.c: In function 'AT91F_DataflashInit':
dataflash.c:42:6: warning: variable 'last_part' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16 21:28:47 +01:00
Marek Vasut
24ccca5eb9 GCC4.6: Squash warnings in onenand_base.c
onenand_base.c: In function ‘onenand_do_lock_cmd’:
onenand_base.c:1946:6: warning: variable ‘wp_status_mask’ set but not used
[-Wunused-but-set-variable]
onenand_base.c: In function ‘onenand_check_maf’:
onenand_base.c:2229:8: warning: variable ‘name’ set but not used
[-Wunused-but-set-variable]
onenand_base.c: In function ‘flexonenand_get_boundary’:
onenand_base.c:2258:6: warning: variable ‘ret’ set but not used
[-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15 22:24:50 +01:00
Marek Vasut
54cd51bf79 OneNAND: Add simple OneNAND SPL
This introduces small OneNAND loader, fitting into 1kB of space (smallest
possible OneNAND RAM size). Some devices equipped with such crappy chips will
use this.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Scott Wood <scottwood@freescale.com>

V2: Introduce spl_onenand_load_image() to load data from OneNAND in SPL
V3: Cleanup, align with nand_spl. Skip whole blocks.
2011-11-15 22:24:50 +01:00
Marek Vasut
0d4e850980 iMX28: Add GPMI NAND driver
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-11-11 11:36:57 +01:00
Heiko Schocher
68bb829500 spl, nand: add 4bit HW ecc oob first nand_read_page function
similiar to commit dc7cd8e59b, only
adapted for the new spl framework.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-03 22:56:25 +01:00
Heiko Schocher
435199f380 arm, davinci: add support for new spl framework
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-03 22:56:25 +01:00
Marek Vasut
7a129a5592 GCC4.6: Use debug() instead of debugX() in s3c24xx_nand.c
The debugX() macro was always used with debug level 1. There is no point to use
it here instead of debug().

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:08 +02:00