Commit Graph

2157 Commits

Author SHA1 Message Date
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Weijie Gao
ebb97ea868 eth: mtk-eth: fix incorrect read of phy-handle
In mt7629-rfb.dts, the phy-handle is a reference to the node phy0, not the
node itself:

	phy-handle = <&phy0>;

	phy0: ethernet-phy@0 {
		reg = <0>;
	}

However the driver used ofnode_find_subnode("phy-handle") to read the node.
It will always fail.

This patch replaces ofnode_find_subnode with dev_read_phandle_with_args to
make sure the node can be read correctly.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Thierry Reding
cdd69acc2c net: rtl8169: Support RTL-8168h/8111h
This version of the RTL-8168 is present on some development boards and
is compatible with this driver. Add support for identifying this version
of the chip so that U-Boot won't complain about it being unknown.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Thierry Reding
b6054b5351 net: rtl8169: Implement ->hwaddr_write() callback
Implement this callback that allows the MAC address to be set for the
Ethernet card. This is necessary in order for the device to be able to
receive packets for the MAC address that U-Boot advertises.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Michal Simek
6845b368f1 phy: ti: Init node before reading
There is a need to fill node before clk_output_sel is setup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Reviewed-by: <hannes.schmelzer@br-automation.com>
2019-05-14 14:43:33 -05:00
James Byrne
77b508d34b net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together
Commit d397f7c45b ("net: phy: micrel: Separate KSZ9000 drivers from
KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns
that you shouldn't select both of them due to a device ID clash between
the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a
system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately
boards like the SAMA5D3xEK do contain both types of PHY, but fortunately
the Linux Micrel PHY driver provides a solution by using different PHY
ID and mask values to distinguish these chips.

This commit contains the following changes:

- The PHY ID and mask values for the KSZ9021 and the KS8721 now match
those used by the Linux driver.
- The warnings about not enabling both drivers have been removed.
- The description for PHY_MICREL_KSZ8XXX has been corrected (these are
10/100 PHYs, not GbE PHYs).
- PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE
since this is selected by PHY_MICREL_KSZ90X1.
- All of the relevant defconfig files have been updated now that
PHY_MICREL_KSZ8XXX does not default to 'Y'.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Tom Rini
eb511984e9 Merge branch 'master' of git://git.denx.de/u-boot-net
- Various PHY fixes / enhancements.
- TI K2G fixes
2019-05-08 22:46:31 -04:00
James Byrne
6314d1c8c0 net: phy: micrel: Find Micrel PHY node correctly
In some of the device trees that specify skew values for KSZ90x1 PHYs
the values are stored (incorrectly) in the MAC node, whereas in others
it is in an 'ethernet-phy' subnode. Previously the code would fail to
find and program these skew values, so this commit changes it to look
for an "ethernet-phy" subnode first, and revert to looking in the MAC
node if there isn't one.

The device trees affected (where the skew values are in a subnode) are
imx6qdl-icore-rqs.dtsi, r8a77970-eagle.dts, r8a77990-ebisu.dts,
r8a77995-draak.dts, salvator-common.dtsi, sama5d3xcm.dtsi,
sama5d3xcm_cmp.dtsi, socfpga_cyclone5_vining_fpga.dts,
socfpga_stratix10_socdk.dts and ulcb.dtsi. Before this change the skew
values in these device trees would be ignored.

The device trees where the skew values are in the MAC node are
socfpga_arria10_socdk.dtsi, socfpga_arria5_socdk.dts,
socfpga_cyclone5_de0_nano_soc.dts, socfpga_cyclone5_de10_nano.dts,
socfpga_cyclone5_de1_soc.dts, socfpga_cyclone5_is1.dts,
socfpga_cyclone5_socdk.dts, socfpga_cyclone5_sockit.dts. These should be
unaffected by this change.

The changes were tested on a sama5d3xcm.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:01 -05:00
James Byrne
83f71ef558 net: phy: micrel: Use correct skew values on KSZ9021
Commit ff7bd212cb ("net: phy: micrel: fix divisor value for KSZ9031
phy skew") fixed the skew value divisor for the KSZ9031, but left the
code using the same divisor for the KSZ9021, which is incorrect.

The preceding commit c16e69f702 ("net: phy: micrel: add documentation
for Micrel KSZ90x1 binding") added the DTS documentation for the
KSZ90x1, changing it from the equivalent file in the Linux kernel to
correctly state that for this part the skew value is set in 120ps steps,
whereas the Linux documentation and driver continue to this day to use
the incorrect value of 200 that came from the original KSZ9021 datasheet
before it was corrected in revision 1.2 (Feb 2014).

This commit sorts out the resulting confusion in a consistent way by
making the following changes:

- Update the documentation to be clear about what the skew values mean,
in the same was as for the KSZ9031.

- Update the Micrel PHY driver to select the appropriate divisor for
both parts.

- Adjust all the device trees that state skew values for KSZ9021 PHYs to
use values based on 120ps steps instead of 200ps steps. This will result
in the same values being programmed into the skew registers as the
equivalent device trees in the Linux kernel do, where it incorrectly
uses 200ps steps (since that's where all these device trees were copied
from).

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:01 -05:00
Valentin-catalin Neacsu
c940646ed1 net: phy: aquantia: Set only autoneg on in register 4.c441
For AQR405 in register 4.c441 bit 15 was override with 0. This caused the
phy to not negotiate at 2.5GB rate with mac. To avoid
this override it needed first to know the previous value of reg 4.c441
and set only bit 3.

Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:00 -05:00
Siva Durga Prasad Paladugu
05eb6a698a net: phy: Fix return value check phy_probe
Don't ignore return value of phy_probe() call as
the probe may fail and it needs to be reported.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:00 -05:00
Siva Durga Prasad Paladugu
c689c48672 net: phy: Reloc next and prev pointers inside phy_drivers
This patch relocates the pointers inside phy_drivers incase
of manual reloc. Without this reloc, these points to invalid
pre relocation address and hence causes exception or hang.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:00 -05:00
Pankaj Bansal
4b0880d66b drivers: net: ldpaa_eth: fix resource leak
if an error occurs in ldpaa_eth_init, need to free all resources
before returning the error.

Threfore, free net_dev before returning from ldpaa_eth_init.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:26:59 -05:00
Tom Rini
504bf790da Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- H6 Beelink GS1 board (Clément)
- Olimex A64-Teres-I board (Jonas)
- sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
- Change include order (Jagan)
- EPHY clock changes (Jagan)
- EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-08 16:21:43 -04:00
Jagan Teki
2348453c41 net: sun8i_emac: Add EPHY CLK and RESET support
Add EPHY CLK and RESET support for sun8i_emac driver to
enable EPHY TX clock and EPHY reset pins via CLK and RESET
framework.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-09 00:44:13 +05:30
Carlo Caione
d47cfdbd31 net: phy: realtek: Introduce quirk to mark RXC not stoppable
When EEE is supported by the PHY and the driver allows it, libphy in the
kernel is configuring the PHY to stop receiving the xMII clock while it
is signaling LPI. While this (usually) works fine in the kernel this is
causing issues in U-Boot when rebooting from the linux kernel with this
bit set (without having the possibility to reset the PHY) where the PHY
suddenly stops working.

A new quirk is introduced to unconditionally reset this bit. If the
quirk is not enabled using the proper configuration symbol, the PHY state
is not changed.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07 14:51:55 -05:00
Carlo Caione
4c29dc1863 net: phy: ti: use generic helpers to access MMD registers
Now that generic helpers are available, use those instead of relying on
ti specific functions.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07 14:51:55 -05:00
Carlo Caione
4f6746dc7f net: phy: Add generic helpers to access MMD PHY registers
Two new helper functions (phy_read_mmd() and phy_write_mmd()) are added
to allow access to the MMD PHY registers.

The MMD PHY registers can be accessed by several means:

1. Using two new MMD access function hooks in the PHY driver. These
functions can be implemented when the PHY driver does not support the
standard IEEE Compatible clause 45 access mechanism described in clause
22 or if the PHY uses its own non-standard access mechanism.

2. Direct access for C45 PHYs and C22 PHYs when accessing the reachable
DEVADs.

3. The standard clause 45 access extensions to the MMD registers through
the indirection registers (clause 22) in all the other cases.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-07 14:51:55 -05:00
Marek Vasut
24b3247e24 net: sh_eth: Add support for operation without clock framework
Add ifdeffery to allow operation without the clock framework
enabled. This is required on RZ/A1, as it does not have clock
driver yet.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07 05:41:32 +02:00
Marek Vasut
31650cf4b0 net: sh_eth: Add RZ/A1 support
Add support for RZ/A1 SoC specifics.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07 05:41:32 +02:00
Marek Vasut
d13a6144ff sh: 7724: Remove CPU support
There are no more boards using this CPU and there is no prospect
of any boards showing up soon, remove it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2019-05-07 05:41:31 +02:00
Tom Rini
44237e272f Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various pinctrl / gpio fixes for R-Car
2019-05-06 07:19:31 -04:00
Tom Rini
86f578ee85 - mscc: small fixes, enhance network support for Serval, Luton amd
Ocelot
 - mt7620: rename arch to more generic name mtmips
 - mips: pass initrd addresses via DT as physical addresses
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlzMa60ACgkQKPlOlyTy
 XBg3FBAAl5I1zNoyEQBuSpe+++0fNFkug0vV985keJA3iXdskdxE8vpxPv6wAp+w
 IjBX+e04LY7i5iW58E//f/JBjzL1H345nPeuRsflmlDARep1pqgkEAsEUglGiQW+
 ZNDq/aoImWhiiX2nQHnU4ykHNyvIhUOTjldrwU5DfIS2N+8M23pjLhODMsgaNmkd
 WfwYB91oTXRnnecwG8Nd1MJU/Jpcns5y6eYwok8vQwkCyzcfsIEP052m3r2SAUMz
 3hIlz9WKAHc+pYLz2BWbn560KPJHyS0UqfemiT/M0JasIkojJcQwtrWTKj7g7ZOq
 z8XJQ1Ny0xOYQbfbUcvQttBwVXzYQTKy0jS6qi4vB9Q0TgpRP+v//n29IAJA0YkS
 BE3Nq96cCMgKarSFkMFaXifv9flnb/wZRymB42Frb9fqiwM2wX10zhcn7zW8gUYc
 0Mocl+zkUrmtmA3gSspMJr6kkfX629l97RK7wiY0PkTa4OKSqqMR5JxlVQ+vK72N
 f/yxWYxTH/90wfVolTHt52J/hNydEapVFuudL8ffnuLo84BWzOHP3bwQwtB927zV
 g4nHxotTmVErz5Pr2JrwaZEFVI+Sc+wXPz68Z7hzZxeiO5tBAELhvtDKAsf9e1gt
 OFgQwA5cTRWWxLmWxyWY3nEbXVqAIOsdWIDepAUqrIXAI5rmFt8=
 =SZ/W
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mips

- mscc: small fixes, enhance network support for Serval, Luton and Ocelot
- mt7620: rename arch to more generic name mtmips
- mips: pass initrd addresses via DT as physical addresses
2019-05-04 20:02:42 -04:00
Marek Vasut
ef8c87812c net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3
According to the R-Car Gen3 Hardware Manual Rev 1.50 of Nov 30, 2018, the
TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) or D3
(r8a77995).

Avoid setting the APSR:TDM bit on these SoCs. Moreover, only set APSR:TDM
when the DT explicitly specifies RGMII ID or TXID mode instead of setting
it unconditionally when the PHY link speed is 1000 Mbit/s.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-05-04 19:26:49 +02:00
Bartosz Golaszewski
50e3b4c7aa net: davinci_emac: drop support for unused PHYs
The boards with SoCs from the DaVinci DM* family used to come with
different PHYs that needed special support implemented in mach-davinci.

Since the support for these chips has long been removed, we can now
drop this unnused code from the emac driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-04 13:04:01 -04:00
Horatiu Vultur
7e323f1782 net: mscc: luton: Update network driver for pcb90
Update Luton network driver to have support also for pcb90. The pcb90
has 24 ports from which 12 ports are connected to SerDes6G.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:46:36 +02:00
Weijie Gao
16b94903e2 mips: rename mach-mt7620 to mach-mtmips
Currently mach-mt7620 contains only support for mt7628. To avoid confusion,
rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms.
MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628
because they do not share the same lowlevel codes.

Dependencies of four drivers are changed to SOC_MT7628 as these drivers
are only used by MT7628.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-05-03 16:43:11 +02:00
Horatiu Vultur
6390da4a57 net: mscc: ocelot: Update network driver for pcb120
Update Ocelot network driver to have support also for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Horatiu Vultur
8cf9473288 net: Add MSCC Serval network driver.
Add network driver for Microsemi Ethernet switch.
It is present on Serval SoCs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-05-03 16:42:23 +02:00
Kever Yang
15f09a1a83 rockchip: use 'arch-rockchip' as header file path
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common
header file path, so that we can get the correct path directly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Gregory CLEMENT
32dfc12b70 net: lpc32xx: Use IRAM for transmit buffer
Since the introduction of the driver, some memory in IRAM is reserved for
the TX buffers.

However there are not used but instead of it, it is the buffer provided
by the net stack which is used. As stated in the comment of the driver,
not using the IRAM buffer could cause cache issue and lower the
throughput.

For the second argument it is less the case for transmitting buffers
because the throughput gain in IRAM is mitigated by the time to copy the
data from RAM to IRAM, but the first argument is still valid and indeed
this patch fixes issue seen with Ethernet on some boards

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-04-26 18:58:20 -04:00
Tom Rini
ceb6ddbc73 - Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
 - Add support for the Libretech-AC AML-S805X-AC board
 - Add Amlogic AXG reset compatible
 - Add I2C support for Amlogic AXG
 - Fix AXG PIN and BANK pinctrl definitions
 - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
 - Add initial support for Amlogic G12A SoC and U200 board
 - Enable PHY_REALTEK for selected boards
 - Fix Khadas VIM2 README
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvtmpAAoJEHfc29rIyEnRc78P/0vN7zuxfSganTctZJGyrika
 9i3aIwr03KaFJJKg2FpnjMvdoYfjbuQoJmCdtgyO5Gzw/E5m3b8zbOwxoXW0r8Mg
 56fTSh8my8XHxnrc+Ryv+qwnf8SRIDv7apNqk6vpmnq3OC6di/Z/BBi7jT/ptNm+
 fT/VvQDZkPl5Em3kO1899dpZ7mk5WBwrBeD3R8hrrHtpF45zlRXKPIA/rlcT01DD
 w1gKL7n8NNuV+PHB7fh+xYYW7XkZpINqg6RbEi4w/DpM9Piys4XlB8+W361OkU3O
 Mk0u4omb6ahVIzV7AT4/Xz7B6edO/JpuCkLF0CCIzWo6TBT4Dpkz2h0wVaUCuZBC
 /mykRIgYmFCtdFuUuklf12xKA2VzNfEqk+mzyohDwTxdpWnKZOyX+OfR6Y2PKL8Y
 qSSDYkgucf16SIDBXu8/uVI0RCLtCfza68/Py63Hu9tzFWrG3tC94j3xmXAt+gBA
 Rg25xQ+KfX6oEGbHpViBJDLDWZDzqRPlkAdp3mb08Zpq9cynQSfM5dyS02YnEod7
 80uyva2Bq8S5a2NQYtLJRim54N2rM4srgFFFS0Qw4Feqv7KRkbZl37mTraOLKFo+
 h8t2EQnlaiIzWEKwXmgd7eXS3wV3lsVDn1q/UzBdqkPgp4HQcBsUONh5dxrD5Bvq
 bm6hYo2+hqt583THUltr
 =Qb3V
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogic

- Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
- Add support for the Libretech-AC AML-S805X-AC board
- Add Amlogic AXG reset compatible
- Add I2C support for Amlogic AXG
- Fix AXG PIN and BANK pinctrl definitions
- Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
- Add initial support for Amlogic G12A SoC and U200 board
- Enable PHY_REALTEK for selected boards
- Fix Khadas VIM2 README
2019-04-24 12:26:25 -04:00
Shawn Guo
1d5b5d2f8f net: add higmacv300 Ethernet driver for HiSilicon platform
It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon
SoCs like Hi3798CV200.  It's based on a downstream U-Boot driver, but
quite a lot of code gets rewritten and cleaned up to adopt driver model
and PHY API.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23 17:57:24 -04:00
Neil Armstrong
d0a9b82b75 regmap: fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
When fixing sandbox test for regmap_read_poll_timeout(), the
sandbox_timer_add_offset was introduced but only defined in sandbox code
thus generating warnings when used out of sandbox :

include/regmap.h:289:2: note: in expansion of macro 'regmap_read_poll_timeout_test'
regmap_read_poll_timeout_test(map, addr, val, cond, sleep_us, \
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/meson_spifc.c:169:8: note: in expansion of macro 'regmap_read_poll_timeout'
ret = regmap_read_poll_timeout(spifc->regmap, REG_SLAVE, data,
        ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/meson_spifc.c: In function 'meson_spifc_txrx':
include/regmap.h:277:4: warning: implicit declaration of function 'sandbox_timer_add_offset' [-Wimplicit-function-declaration]

This fix adds a timer_test_add_offset() only defined in sandbox, and
renames the previous sandbox_timer_add_offset() to it.

Cc: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: df9cf1cc08 ("test: dm: regmap: Fix the long test delay")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23 11:17:15 +02:00
Tom Rini
4b37f36d68 Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17 09:19:45 -04:00
Tom Rini
14b8c420b8 Xilinx/FPGA changes for v2019.07
fpga:
 - Add support for external data in FIT
 - Extend testing for external data case
 - Inform user about a need to run post config on Zynq
 
 arm:
 - Tune zynq command functions
 - Fix internal variable setting
 
 arm64:
 - Add support for zc39dr decoding
 - Disable WDT for zcu100
 - Small changes in reset_reason()
 - Some DT changes (spi)
 - Tune qspi-mini configuration
 - Remove useless eeprom setting
 - Fix two sdhci boot case
 
 spi:
 - Fix tap delay programming
 
 clk:
 - Enable i2c in SPL
 
 net:
 - Fix gem phydev handling
 - Remove phy detection code from gem driver
 
 general:
 - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAly262oACgkQykllyylKDCH44gCbBnuxUH6ZF0B7Leuee4te7C59
 LmUAn14/bbtMt17zkMSADCjY9yGWF4au
 =mWrW
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17 09:19:13 -04:00
Jagan Teki
d3a2c0586e net: sun8i_emac: Add CLK and RESET support
Add CLK and RESET support for sun8i_emac driver to
enable TX clock and reset pins via CLK and RESET
framework.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-16 16:29:01 +05:30
Jagan Teki
695f6043c9 net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
Unlike other Allwinner SoC's R40 GMAC clock control register
is locate in CCU, but rest located via syscon itself. Since
the phandle property for current code look for 'syscon' and
it will grab the respective ccu or syscon base address based
on DT property defined in respective SoC dtsi.

So, use the existing 'syscon' code even for R40 for retrieving
GMAC clock via CCU and update the register directly in
sun8i_emac_set_syscon instead of writing it separately using
ccm base.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16 16:29:01 +05:30
Jagan Teki
0ed8eaf1de net: sunxi_emac: Add CLK support
Add CLk support for sunxi_emac to enable AHB_EMAC clock
via CLK framework.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-16 16:29:00 +05:30
Michal Simek
c19d4c72aa net: gem: Remove phy autodetection code
There is no reason to detect phy when core is doing it for us.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:52:02 +02:00
Siva Durga Prasad Paladugu
51c019ff8c net: zynq_gem: Modify phy supported features after max-speed was set
The phydev supported features were reset in phy_set_supported() so,
move the setting of driver supported features after this so that it
wont lost in phy_set_supported().

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:52:02 +02:00
Tom Rini
75ce8c938d Move to DM
-----------
 
 - DM support in sata
 - Toradex Board to DM
 - wandboard to DM
 - tbs2910 to DM
 - GE boards to DM
 - VHybrid boards to DM
 - DM_VIDEO for i.MX
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAly0NhIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3XiUMALq2W4HPjFlDaVHpaxKIvZMkqAAjF7eE6M9l
 DWivSm/Anm5jeE2UM80FpV7npdkPMcOl2YdcIjg+jMKKP6DI+4N6gEhWvxX9mEoC
 RmR2nxGC/GIc0Blb4HU9V6xMkeR5jSAQ6bxZmX3IrnG6u67BIi4NmkNrT9gdQ+WT
 PkJf2Ai7DN7+epfOzjO0d/LjS3hAVb+nesHuxoVraElwc5sEMAnoD0vIMUrXceZ2
 +V6WiU1i9jeLj3fA8P+4o6wqQpxFLlJiuC0FUNKQH/kWIqX6MGrr9ElseLUV0O+Z
 LL5nqsuTgG/fAol1r71De49fiML2Pfx7ZkAZOJ1NMUOXUKw25ulO/wi0wg8t+l2Z
 2oAQ3S84RUVYX4MFLwxkBCq3uC9hvyCfWF1GmVLV6xSEulS6PnHx0FL6OTY4uB3h
 bmVs/mutwwqYBaaoqGG4sG5L7TVSG/JxNgTVNh3Aqj5a89Fd9us+nBhLhoq6xyVl
 cEf+/gPGQ97JEj9DolAPFIFQJBvL7g==
 =KLsH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imx

Move to DM
-----------

- DM support in sata
- Toradex Board to DM
- wandboard to DM
- tbs2910 to DM
- GE boards to DM
- VHybrid boards to DM
- DM_VIDEO for i.MX
2019-04-15 07:31:14 -04:00
Lukasz Majewski
f1cbd87e50 net: Kconfig: FEC: Add dependency on VF610
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
27589e7d8c net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
The NXP's FEC driver can be reused on vf610 device (with DM).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2019-04-13 20:30:08 +02:00
Tom Rini
0a5228be86 - mt76xx: add USB support, small fixes
- ath79: small fixes, add support for QCA9563 SoC and AP152 reference board
 - mscc: small fixes, add network support for JR2 and ServalT SoCs
 - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs
 - MIPS: fix redundant relocation of initrd images
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlywtKQACgkQKPlOlyTy
 XBgYbBAAlRLhN52f2vv9Hng/tfCAuZk7c9tJ+b/5i36ZoJNozeaiOBgwVl3eeEa9
 v4SeKz4J+9FJLOSZkIPrCvX+HaACQn7Pqw/64h3JE8TEzfU5lgmV4Xk2dcXtkmEL
 L5PTQoNMZDgQaeltLtN29yIW5lVxx0NUN9O0FLY5+R/ptXlCFaAGdgSuXH36boDR
 /cvfLlaZPM/hA7l3wRUjWa17L8MNEon4+cqLkzDyTTihdHOdZA4P1O7ce/XffGQp
 BAiSta4EztB1xs0oTAOEmUJp1v8Ae7yRuFoZaCp+Dgq+0WOTbxDW4J57fTaphES1
 su3yoYjju+M/dUb/sWmOQNjeIchJPYWcpiOl9E8jQ/l2SaBJ6Oxmg7PxC3Ww0X2z
 JdF6mcKeaDH3WYO20FeC6xb9Q9FN2yX4rcW/Yg46TdeJ3T2sj8A19ZCHoeAQRl0I
 68SbAaDJw/K3fTBFPd9VyQQQawPbyhmpdQAOWtixNWBFIBbZpqI4o1DMJKJRoxqd
 Ail++ysLUICB0XXg0rGI+dFusjcu9AAeRODc11dtGa0YBh2Y28JrJ4OuV14GYQhe
 5J8BquRaDADA3iK/+3C6TUSQGhb5pFXTcsdNBC9zBPb/ePeMDfZxBcB2vCOnZDZ1
 m0kR5qnsz4IH8/rCmJ5wmMBh6JuyPoCSdiTVuuU5CuCVGYbmJuE=
 =NrV8
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-04-12' of git://git.denx.de/u-boot-mips

- mt76xx: add USB support, small fixes
- ath79: small fixes, add support for QCA9563 SoC and AP152 reference board
- mscc: small fixes, add network support for JR2 and ServalT SoCs
- bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs
- MIPS: fix redundant relocation of initrd images
2019-04-13 08:27:26 -04:00
Horatiu Vultur
746f2d3e8b net: Add MSCC ServalT network driver.
Add network driver for Microsemi Ethernet switch.
It is present on ServalT SoCs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:52 +02:00
Horatiu Vultur
5e1d417bec net: Add MSCC Jaguar2 network driver.
Add network driver for Microsemi Ethernet switch.
It is present on Jaguar2 SoCs.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Rosy Song
8426523af1 ag7xxx: add initial support for s17
S17 ethernet support is for QCA8337N, which used on
AP152 (QCA9563) board. It is a 7 ports GbE switch.

Signed-off-by: Rosy Song <rosysong@rosinson.com>

Changes for v2-v3:
   - add more commit message for s17

Changes for v4-v5:
   - coding style cleanup
2019-04-12 17:32:51 +02:00
Horatiu Vultur
cd424f35ee net: mscc: ocelot: Fix reset of the phys
The function mscc_miim_reset resets all the phys, but it is called for
each phy separetely. One consequence of this is that the boot time
is increased by 2 seconds.

The fix consists for calling the mscc_miim_reset function only once for
all phys.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:50 +02:00
Rosy Song
f1f943e96c drivers: add ethernet support for qca953x in ag7xxx driver
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-04-12 17:32:50 +02:00