Commit Graph

402 Commits

Author SHA1 Message Date
Wolfgang Denk
43f6226db0 Merge with /home/wd/git/u-boot/custodian/u-boot-74xx-7xx 2007-04-18 17:00:09 +02:00
Wolfgang Denk
b99c1e6d8e Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup. 2007-04-18 16:53:52 +02:00
Domen Puncer
d3832e8fe1 [PATCH] icecube/lite5200b: wakeup from low-power support
U-Boot part of Lite5200b low power mode support.
Puts SDRAM out of self-refresh and transfers control to
address saved at physical 0x0.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2007-04-16 14:00:13 +02:00
Haavard Skinnemoen
5374b36de9 AVR32: Use avr32-linux- cross-compilation prefix by default
It doesn't really matter which toolchain you use to compile u-boot,
but the avr32-linux one is probably what most people have installed.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Wolfgang Denk
25b0806fff Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx 2007-04-04 02:18:56 +02:00
Wolfgang Denk
31c98a8822 Minor coding style cleanup. 2007-04-04 02:09:30 +02:00
Wolfgang Denk
c8f2280162 Merge with /home/wd/git/u-boot/custodian/u-boot-microblaze 2007-04-04 02:05:48 +02:00
Stefan Roese
0e7d4916af Merge with git://www.denx.de/git/u-boot.git 2007-03-31 13:44:12 +02:00
Stefan Roese
430f1b0f9a Merge some AMCC make targets to keep the top-level Makefile smaller
Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-28 15:03:16 +02:00
Michal Simek
1798049522 Support for XUPV2P board
Reset support
BSP autoconfig support
2007-03-26 01:39:07 +02:00
Wolfgang Denk
a17824c749 Merge with /home/wd/git/u-boot/custodian/u-boot-blackfin 2007-03-22 00:00:03 +01:00
Stefan Roese
fc1e45ce6e Merge with /home/stefan/git/u-boot/acadia 2007-03-21 14:38:25 +01:00
Stefan Roese
16c0cc1c82 [PATCH] Add AMCC Acadia (405EZ) eval board support
This patch adds support for the new AMCC Acadia eval board.

Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-21 13:39:57 +01:00
Aubrey Li
654589873d [Blackfin][PATCH] Add BF561 EZKIT board support 2007-03-20 18:16:24 +08:00
Aubrey Li
26bf7deca3 [Blackfin][PATCH] Add BF537 stamp board support 2007-03-19 01:24:52 +08:00
Aubrey Li
8440bb1458 [Blackfin][PATCH] code cleanup 2007-03-12 00:25:14 +08:00
Michal Simek
cfc67116a7 [Microblaze][PATCH] part 2
timer support
interrupt controller support
flash support
ethernet support
cache support
board information support
env support
booting image support

adding support for Xilinx ML401
2007-03-11 13:48:24 +01:00
Aubrey.Li
ef26a08fef [Blackfin][PATCH-2/2] Common files changed to support bf533 platform 2007-03-09 13:40:56 +08:00
Wolfgang Denk
37896293bc Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx 2007-03-08 22:42:44 +01:00
Wolfgang Denk
dd0321f5f8 Merge with /home/hs/jupiter/u-boot 2007-03-08 21:45:04 +01:00
Wolfgang Denk
d8be57669b Merge with /home/git/u-boot 2007-03-08 11:34:24 +01:00
Wolfgang Denk
ad5bb451ad Restructure POST directory to support of other CPUs, boards, etc. 2007-03-06 18:08:43 +01:00
Wolfgang Denk
a5284efd12 Fix HOSTARCH handling.
Patch by Mike Frysinger, Mar 05 2007
2007-03-06 18:01:47 +01:00
Timur Tabi
7a78f148d6 mpc83xx: Add support for the MPC8349E-mITX-GP
Add support for the MPC8349E-mITX-GP, a stripped-down version of the
MPC8349E-mITX.  Bonus features include support for low-boot (BMS bit in
HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.

Signed-off-by: Timur Tabi <timur@freescale.com>
2007-03-02 11:05:54 -06:00
Kim Phillips
4decd84e8f mpc83xx: sort Makefile targets
reordered targets alphabetically
2007-03-02 11:05:53 -06:00
Paul Gortmaker
91e2576977 mpc83xx: U-Boot support for Wind River SBC8349
I've redone the SBC8349 support to match git-current, which
incorporates all the MPC834x updates from Freescale since the 1.1.6
release,  including the DDR changes.

I've kept all the SBC8349 files as parallel as possible to the
MPC8349EMDS ones for ease of maintenance and to allow for easy
inspection of what was changed to support this board.  Hence the SBC8349
U-Boot has FDT support and everything else that the MPC8349EMDS has.

Fortunately the Freescale updates added support for boards using CS0,
but I had to change spd_sdram.c to allow for board specific settings for
the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
default if the board doesn't specify a value.)

Hopefully this should be mergeable as-is and require no whitespace
cleanups or similar, but if something doesn't measure up then let me
know and I'll fix it.

Thanks,
Paul.
2007-03-02 11:05:53 -06:00
Dave Liu
24c3aca3f1 mpc83xx: Add support for the MPC832XEMDS board
This patch supports DUART, ETH3/4 and PCI etc.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2007-03-02 11:05:53 -06:00
roy zang
00b574bdc8 Merge branch 'master' into hpc2
Conflicts:

	drivers/Makefile
Fix the merge conflict in file drivers/Makefile
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2007-02-28 16:46:48 +08:00
Stefan Roese
90b0cf47eb Merge with /home/stefan/git/u-boot/denx-merge-sr 2007-02-20 10:58:04 +01:00
Stefan Roese
4745acaa1a [PATCH] Add support for the AMCC Katmai (440SPe) eval board
Signed-off-by: Stefan Roese <sr@denx.de>
2007-02-20 10:57:08 +01:00
Wolfgang Denk
bc2b9c3383 Merge with /home/tur/git/u-boot#motionpro 2007-02-16 23:44:55 +01:00
Heiko Schocher
2605e90bf6 [PATCH] Added support for the jupiter board.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-02-16 07:57:42 +01:00
roy zang
30bddf2c46 Merge branch 'master' into hpc2 2007-02-12 11:24:27 +08:00
Bartlomiej Sieka
53d4a4983f [Motion-PRO] Preliminary support for the Motion-PRO board. 2007-02-09 10:45:42 +01:00
Stefan Roese
2aa54f651a [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
Signed-off-by: Stefan Roese <sr@denx.de>
2007-02-02 12:42:08 +01:00
Stefan Roese
8b7d1f0ab7 [PATCH] Add support for esd mecp5200 board
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2007-01-31 16:37:34 +01:00
Wolfgang Denk
c105f4c660 Merge with /home/sr/git/u-boot/denx-merge-sr 2007-01-30 17:32:15 +01:00
Stefan Roese
700200c67e [PATCH] Merge Yosemite & Yellowstone board ports
Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
share one config file and all board specific files. This way we
don't have to maintain two different sets of files for nearly
identical boards.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-30 17:04:19 +01:00
roy zang
c1c52e38d3 Merge branch 'master' into hpc2 2007-01-30 16:43:18 +08:00
Gary Jennejohn
6bd2447ee4 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists 2007-01-24 12:16:56 +01:00
roy zang
ee460917af Merge branch 'master' into hpc2
Conflicts:

	drivers/cfi_flash.c

The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
mpc7448hpc2 board.
2007-01-22 13:15:35 +08:00
Stefan Roese
9d8d5a5bfb [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 16:05:47 +01:00
Stefan Roese
3a83ee3021 Merge with /home/stefan/git/u-boot/denx-merge-sr 2007-01-18 10:27:26 +01:00
Stefan Roese
5fb692cae5 [PATCH] Add support for AMCC Taishan PPC440GX eval board
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 10:25:34 +01:00
Wolfgang Denk
6d3e010723 Raname solidcard3 into sc3; add redundant env for sc3 2007-01-16 18:30:50 +01:00
Wolfgang Denk
f11033e739 Merge with /home/hs/SC3/u-boot
Some code cleanup.
2007-01-15 13:41:04 +01:00
Wolfgang Denk
ddd4123336 Merge with /home/hs/MAN/u-boot-dev 2007-01-15 12:56:52 +01:00
Heiko Schocher
ca43ba18e9 Added support for the SOLIDCARD III board from Eurodesign
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-11 15:44:44 +01:00
Marian Balakowicz
d9384de2f5 CAM5200 flash driver modifications:
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
- add second build target 'cam5200_niosflash' which still uses custom driver
2007-01-10 00:26:15 +01:00
Wolfgang Denk
f4eb54529b Prepare for release 1.2.0 2007-01-07 00:13:11 +01:00