Commit Graph

30 Commits

Author SHA1 Message Date
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
0528979fa7 part: Drop disk_partition_t typedef
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
ba06b3c50b common: Drop uuid.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Marek Behún
48180e15d3 fs: btrfs: support sparse extents
When logical address of a regular extent is 0, the extent is sparse and
consists of all zeros.

Without this when sparse extents are used in a file reading fails with
  Cannot map logical address 0 to physical

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-04-20 12:23:29 -04:00
Qu Wenruo
b941d1cd16 fs: btrfs: Fix LZO false decompression error caused by pending zero
For certain btrfs files with compressed file extent, uboot will fail to
load it:

  btrfs_read_extent_reg: disk_bytenr=14229504 disk_len=73728 offset=0 nr_bytes=131
  072
  decompress_lzo: tot_len=70770
  decompress_lzo: in_len=1389
  decompress_lzo: in_len=2400
  decompress_lzo: in_len=3002
  decompress_lzo: in_len=1379
  decompress_lzo: in_len=88539136
  decompress_lzo: header error, in_len=88539136 clen=65534 tot_len=62580

NOTE: except the last line, all other lines are debug output.

Btrfs lzo compression uses its own format to record compressed size
(segment header, LE32).

However to make decompression easier, we never put such segment header
across page boundary.

In above case, the xxd dump of the lzo compressed data looks like this:

00001fe0: 4cdc 02fc 0bfd 02c0 dc02 0d13 0100 0001  L...............
00001ff0: 0000 0008 0300 0000 0000 0011 0000|0000  ................
00002000: 4705 0000 0001 cc02 0000 0000 0000 1e01  G...............

'|' is the "expected" segment header start position.

But in that page, there are only 2 bytes left, can't contain the 4 bytes
segment header.

So btrfs compression will skip that 2 bytes, put the segment header in
next page directly.

Uboot doesn't have such check, and read the header with 2 bytes offset,
result 0x05470000 (88539136), other than the expected result
0x00000547 (1351), resulting above error.

Follow the btrfs-progs restore implementation, by introducing tot_in to
record total processed bytes (including headers), and do proper page
boundary skip to fix it.

Please note that, current code base doesn't parse fs_info thus we can't
grab sector size easily, so it uses PAGE_SIZE, and relying on fs open
time check to exclude unsupported sector size.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Cc: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-04-16 22:13:50 -04:00
Qu Wenruo
a62db24526 fs: btrfs: Reject fs with sector size other than PAGE_SIZE
Although in theory u-boot fs driver could easily support more sector
sizes, current code base doesn't have good enough way to grab sector
size yet.

This would cause problem for later LZO fixes which rely on sector size.

And considering that most u-boot boards are using 4K page size, which is
also the most common sector size for btrfs, rejecting fs with
non-page-sized sector size shouldn't cause much problem.

This should only be a quick fix before we implement better sector size
support.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Cc: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-04-16 22:13:50 -04:00
Qu Wenruo
25babb7c1b fs: btrfs: Use LZO_LEN to replace immediate number
Just a cleanup. These immediate numbers make my eyes hurt.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Cc: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-04-16 22:13:50 -04:00
Marek Behún
53290e6efd fs: btrfs: add zstd decompression support
This adds decompression support for Zstandard, which has been included
in Linux btrfs driver for some time.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-05 08:48:50 -04:00
Marek Behún
cd22e34c11 fs: btrfs: fix btrfs methods return values on failure
The btrfs implementation methods .ls(), .size() and .read() returns 1 on
failure, but the command handlers expect values <0 on failure.

For example if given a nonexistent path, the load command currently
returns success, and hush scripting does not work.

Fix this by setting return values of these methods to -1 instead of 1 on
failure.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03 07:30:31 -04:00
Marek Behún
881e020958 fs: btrfs: Do not print mount fail message when not btrfs filesystem
Other filesystem drivers don't do this.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-05-03 07:23:17 -04:00
Tom Rini
6aebc0d11a Revert "fs: btrfs: fix false negatives in ROOT_ITEM search"
Per Pierre this change shouldn't have been applied as it was superseded
by "fs: btrfs: fix btrfs_search_tree invalid results" which is also
applied now as 1627e5e598.

This reverts commit 633967f981.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-27 11:35:44 -04:00
Pierre Bourdon
1627e5e598 fs: btrfs: fix btrfs_search_tree invalid results
btrfs_search_tree should return the first item in the tree that is
greater or equal to the searched item.

The search algorithm did not properly handle the edge case where the
searched item is higher than the last item of the node but lower than
the first item of the next node. Instead of properly returning the first
item of the next node, it was returning an invalid path pointer
(pointing to a non-existent item after the last item of the node + 1).

This fixes two issues in the btrfs driver:
  - Looking for a ROOT_ITEM could fail if it was the first item of its
    leaf node.
  - Iterating through DIR_INDEX entries (for readdir) could fail if the
    first DIR_INDEX entry was the first item of a leaf node.

Signed-off-by: Pierre Bourdon <delroth@gmail.com>
Cc: Marek Behun <marek.behun@nic.cz>
2019-04-26 17:53:16 -04:00
Pierre Bourdon
633967f981 fs: btrfs: fix false negatives in ROOT_ITEM search
ROOT_ITEMs in btrfs are referenced without knowing their actual "offset"
value. To perform these searches using only two items from the key, the
btrfs driver uses a special "btrfs_search_tree_key_type" function.

The algorithm used by that function to transform a 3-tuple search into a
2-tuple search was subtly broken, leading to items not being found if
they were the first in their tree node.

This commit fixes btrfs_search_tree_key_type to properly behave in these
situations.

Signed-off-by: Pierre Bourdon <delroth@gmail.com>
Cc: Marek Behun <marek.behun@nic.cz>
2019-04-26 17:53:15 -04:00
Yevgeny Popovych
5b781cf08d fs: btrfs: Fix tree traversal with btrfs_next_slot()
When traversing slots in a btree (via btrfs_path) with btrfs_next_slot(),
we didn't correctly identify that the last slot in the leaf was reached
and we should jump to the next leaf.

This could lead to any kind of runtime errors or corruptions, like:
* file data not being read at all, or is read partially
* file is read but is corrupted
* (any) metadata being corrupted or not read at all, etc

The easiest way to reproduce this is to read a large enough file that
its EXTENT_DATA items don't fit into a single leaf.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Tested-by: Marek Behún <marek.behun@nic.cz>
2018-10-08 14:45:02 -04:00
Marek Vasut
c9795396ed fs: btrfs: Fix cache alignment bugs
The btrfs implementation passes cache-unaligned buffers into the
block layer, which triggers cache alignment problems down in the
block device drivers. Align the buffers to prevent this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Behun <marek.behun@nic.cz>
2018-09-30 13:00:37 -04:00
Marek Behún
f8c173b6a0 fs: btrfs: Fix wrong comparison in logical to physical mapping
The comparison
  logical > item->logical + item->length
in btrfs_map_logical_to_physical is wrong and should be instead
  logical >= item->logical + item->length
For example, if
  item->logical = 4096
  item->length = 4096
and we are looking for logical = 8192, it is not part of item (item is
[4096, 8191]). But the comparison is false and we think we have found
the correct item, although we should be searing in the right subtree.

This fixes some bugs I encountered.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-07-20 15:37:44 -04:00
Yevgeny Popovych
d146a7b9c6 fs: btrfs: Do not fail when all root_backups are empty
This is the case when reading freshly created filesystem.
The error message is like the following:
    btrfs_read_superblock: No valid root_backup found!

Since the data from super_roots/root_backups is not actually used -
decided to rework btrfs_newest_root_backup() into
btrfs_check_super_roots() that will only check if super_roots
array is valid and correctly handle empty scenario.

As a result:
* btrfs_read_superblock() now only checks if super_roots array is valid;
  the case when it is empty is considered OK.
* removed root_backup pointer from btrfs_info,
  which would be NULL in case of empty super_roots.
* btrfs_read_superblock() verifies number of devices from the superblock
  itself, not newest root_backup.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Sergey Struzh <sergeys@pointgrab.com>
2018-06-18 14:43:12 -04:00
Yevgeny Popovych
f559180176 fs: btrfs: Fix not all CHUNK_ITEMs being read from CHUNK_TREE
This causes errors when translating logical addresses to physical:
  btrfs_map_logical_to_physical: Cannot map logical address <addr> to physical
  btrfs_file_read: Error reading extent

The behavior of btrfs_map_logical_to_physical() is to stop traversing
CHUNK_TREE when it encounters first non-CHUNK_ITEM, which makes
only some portion of CHUNK_ITEMs being read.
Change it to skip over non-chunk items.

Signed-off-by: Yevgeny Popovych <yevgenyp@pointgrab.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Sergey Struzh <sergeys@pointgrab.com>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-06-13 07:49:12 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Marek Behún
22fc7b6cd6 fs: btrfs: Remove unused debug code left from development
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-04-06 17:04:33 -04:00
Tom Rini
f39bfec230 fs: btrfs: Fix printf format character warning
When printing a size_t value we need to use %zu for portability between
32bit and 64bit targets.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
2018-01-29 12:50:08 -05:00
Alberto Sánchez Molero
2021f083ed fs: btrfs: Fix unaligned memory accesses
Loading files stored with lzo compression from a btrfs filesystem was
producing unaligned memory accesses, which were causing a data abort
and a reset on an Orange Pi Zero.

The change in hash.c is not triggered by any error but follows the
same pattern. Please confirm.

Fixed according to doc/README.unaligned-memory-access.txt

Signed-off-by: Alberto Sánchez Molero <alsamolero@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
2018-01-28 12:27:12 -05:00
Marek Behún
733d963e3b fs: btrfs: Remove a foreign language note
I accidentaly left a foreign language note in the code from development.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Marek Behún
ecab881c7f fs: btrfs: Fix usage of uninitialized variables
The variable res should be initialized to 0 in these functions,
because if the searched key is not found, the variable is used
uninitialized.

Reported-by: Coverity (CID: 167335)
Reported-by: Coverity (CID: 167336)
Reported-by: Coverity (CID: 167337)
Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16 09:42:51 -04:00
Tom Rini
6b7fd350e8 fs/btrfs: Fix warning in btrfs_check_super()
We specifically say that the last arg is u32, so use %lu.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-03 08:44:13 -04:00
Marek Behún
0c936ee319 fs: btrfs: Add U-Boot fs handlers.
Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/Kconfig
 create mode 100644 fs/btrfs/Makefile
 create mode 100644 fs/btrfs/btrfs.c
 create mode 100644 include/btrfs.h
2017-10-02 21:52:18 -04:00
Marek Behún
21a14facb1 fs: btrfs: Add single-device read-only BTRFS implementation
This adds the proper implementation for the BTRFS filesystem.
The implementation currently supports only read-only mode and
the filesystem can be only on a single device.

Checksums of data chunks is unimplemented.

Compression is implemented (ZLIB + LZO).

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/btrfs.h
 create mode 100644 fs/btrfs/chunk-map.c
 create mode 100644 fs/btrfs/compression.c
 create mode 100644 fs/btrfs/ctree.c
 create mode 100644 fs/btrfs/dev.c
 create mode 100644 fs/btrfs/dir-item.c
 create mode 100644 fs/btrfs/extent-io.c
 create mode 100644 fs/btrfs/hash.c
 create mode 100644 fs/btrfs/inode.c
 create mode 100644 fs/btrfs/root.c
 create mode 100644 fs/btrfs/subvolume.c
 create mode 100644 fs/btrfs/super.c
2017-10-02 21:52:17 -04:00
Marek Behún
597b4aff7b fs: btrfs: Add disk-to-cpu and cpu-to-disk conversion functions
BTRFS on disk structures are stored in Little Endian. Add functions
to convert this structures to cpu and to disk format.

On Little Endian hosts, these functions do nothing.

On Big Endian the CALL_MACRO_FROM_EACH from variadic-macro.h is used
to define all the members for each structure on which cpu_to_le* or
le*_to_cpu is to be called.

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/conv-funcs.h
2017-10-02 21:52:17 -04:00
Marek Behún
d4a704af5d fs: btrfs: Add btrfs_tree.h and ctree.h from Linux (and modified)
Add btrfs_tree.h and ctree.h from Linux which contains constants
and structures for the BTRFS filesystem.

Signed-off-by: Marek Behun <marek.behun@nic.cz>

 create mode 100644 fs/btrfs/btrfs_tree.h
 create mode 100644 fs/btrfs/ctree.h
2017-10-02 21:52:17 -04:00