Commit Graph

31 Commits

Author SHA1 Message Date
Lukasz Majewski
a272c99d30 samsung: usb: phy: Support for DWC3 PHY
New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have
been added to u-boot to provide proper PHY handling at Exynos5 SoCs.

This code is used thereafter in the board_usb_init() call.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2015-06-08 15:25:44 +02:00
Lukasz Majewski
3621b3b8a7 usb: dwc3: Correct clean up code for requests
For u-boot dwc3 driver the scatter gather list support has been removed
from original linux code. It is correct, since we try to send one request
at a time.
However, the cleanup left spurious break, which caused early exit from
loop at dwc3_cleanup_done_reqs() function. As a result the dwc3_gadget_giveback()
wasn't called and caused USB Mass Storage to hang.

This commit removes this problem and refactor the code to remove superfluous
do { } while(1) loop.

Test HW: Odroid XU3 (with ./test/ums/ums_gadget_test.sh)

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:12 +02:00
Lukasz Majewski
afa093bfa7 usb: dwc3: gadget: Set non EP0 max packet limit to 512B
Commit "drivers/dwc3: add a workaround for too small OUT requests"
sets max packet for OUT requests when transfer is smaller.

Until this change the default maxpacket for non EP0 EPs was 1024. This is
too much, since UMS LBA size is 512B

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:12 +02:00
Lukasz Majewski
29e7fc19ce usb: dwc3: gadget: Set all ctrl fields of Transfer Control Blocks (TRB) to be LST
It turned out that current dwc3 gadget code is preparing multiple TRBs
for a transfer. Unfortunately, when multiple requests are in the same
queue, only for the last one the LST (last) ctrl bit is set.

Due to that dwc3 HW executes all TRBs up till the one marked as last.
Unfortunately, UMS requires call of ->complete callback after any send TRB.
This is the reason for "hangs" in executing UMS.

This code simplifies this situation and set each TRB's ctrl field bit to be
last (LST bit).

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:12 +02:00
Marek Szyprowski
137f7c590d usb: dwc3: optimize interrupt loop
There is no point in calling dwc3_thread_interrupt() if no event is
pending. There is also no point in flushing event cache in EVERY loop
iteration.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2015-04-14 05:48:12 +02:00
Marek Szyprowski
5dc4538bf3 usb: dwc3: add a workaround for too small OUT requests
DWC3 hangs on OUT requests smaller than maxpacket size,
so HACK the request length to be at least equal to maxpacket size.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2015-04-14 05:48:12 +02:00
Joonyoung Shim
7e9cb7962f usb: dwc3: make dwc3_set_mode to static
This commit makes the dwc3_set_mode() as static, to prevent collisions.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:12 +02:00
Lukasz Majewski
2252d150ef usb: dwc3: Remove BIT(x) macro from DWC3's gadget code
The BIT() macro is used only in those places, so it is reasonable to
replace it by a constant value.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:12 +02:00
Kishon Vijay Abraham I
5b9ce0e28a usb: dwc3: Makefile: Make dwc3 driver compile in u-boot
Now that the entire dwc3 driver is adapted to compile with uboot build,
modify the Makefiles so that the dwc3 driver can be built.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
8d488f3e16 usb: dwc3: Add chained TRB support for ep0
dwc3 can do only max packet aligned transfers. So in case request length
is not max packet aligned and is bigger than DWC3_EP0_BOUNCE_SIZE
two chained TRBs is required to handle the transfer.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
1f78f8feda usb: dwc3: ep0: preparation for implementing chained TRB
No functional change. Modified few things so that there are no
code duplication while implementing chained TRB.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
526a50f8ec dwc3: flush the buffers before using it
In the linux kernel, non cacheable buffers are used. However in uboot
since there are no APIs to allocate non cacheable memory, all
the buffers should be flushed before using it.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
6900aeda52 usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms
Added a single driver for both USB2 PHY programming and USB3 PHY
programming.

USB3 PHY is taken from drivers/phy/phy-ti-pipe3.c in linux kernel.
commit 56042e : phy: ti-pipe3: Fix suspend/resume and module reload.

USB2 PHY is taken from drivers/phy/phy-omap-usb2.c in linux kernel.
commit eb82a3 : phy: omap-usb2: Balance pm_runtime_enable() on probe
failure and remove.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
53de33fc00 usb: dwc3: dwc3-omap: add interrupt status API to check for interrupts
Added an API to check for interrupt status. This API is generally
called from board file to check for interrupt status.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
57207657a1 dwc3: dwc3-omap: add support for multiple dwc3-omap controllers
Added support for multiple dwc3 omap controllers. This gives uboot
the capability to control multiple dwc3 omap controllers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
c241d7eee4 usb: dwc3: dwc3-omap: change probe and remove to uboot init and uboot exit code
Removed probe and remove that are specific to linux and replaced it with
uboot init and uboot exit. These functions will be invoked from boardfile.

This will change once we have dwc3-omap driver adapted to use the uboot
driver model.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
93c3763810 include: dwc3-omap-uboot: add a structure for populating dwc3-omap platform data
Added a structure to populate dwc3 omap platform data. The board file should
populate these platform data before invoking dwc3 omap driver.

This will be removed once dwc3-omap driver is adapted to use the driver model.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
3f52e1b985 usb: dwc3: dwc3-omap: make dwc3-omap build in uboot
*) Changed the included header files to that used in u-boot.
*) Removed extcon_* APIs
*) Removed regulator_* APIs
*) Fixed other misc warnings
*) Added dwc3-omap.h to include the definitions of UTMI modes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
27d3b89d33 dwc3: core: added an API to invoke irq handlers
Since interrupt support is not present in u-boot, added an
API to handle the interrupts in dwc3 core. This API can be
polled to handle the interrupts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
793d347f53 dwc3: core: add support for multiple dwc3 controllers
Added support for multiple dwc3 controllers. This gives uboot
the capability to control multiple dwc3 controllers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:10 +02:00
Kishon Vijay Abraham I
8e1906a81f dwc3: core: change probe and remove to uboot init and uboot exit code
Removed probe and remove that are specific to linux and replaced it with
uboot init and uboot exit. These functions will be invoked from boardfile.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
71744d0d06 usb: dwc3: core: make dwc3 core build in uboot
*) Changed the include header files to that used in u-boot.
*) Removed phy_* APIs
*) Removed jiffies and used a simple while loop
*) Used dma_alloc_coherent and dma_free_coherent APIs of u-boot
*) Fixed other misc warnings

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
b6d959acaa usb: dwc3: ep0: make dwc3 ep0 build in uboot
*) Changed the included header files to that used in u-boot.
*) added dwc3_ep_event_string() used in ep0.c
*) Fixed other misc warnings

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
747a0a5b38 usb: dwc3: gadget: make dwc3 gadget build in uboot
Did a bunch of things to get dwc3/gadget.c compile in u-boot without
build errors and warnings
*) Changed the included header files to that used in u-boot.
*) Used dma_alloc_coherent and dma_free_coherent APIs of u-boot
*) removed sg support
*) remove jiffies and used a simple while loop
*) removed irq support and added a function to call these interrupt handler.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
18be4cb151 usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy
Added a header file to include various linux specific APIs like
pr_debug, WARN_ WARN_ON_ONCE etc.. in order to avoid compilation
error while building dwc3 driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
027b6103cd usb: dwc3: remove pm related operations from dwc3 driver
Removed all pm related operations including pm_runtime APIs,
suspend/resume hooks as support for these are not present in u-boot.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
9848e5740a usb: dwc3: fix dwc3 header files
Changed the header files included in core.h and io.h to the u-boot header
files so that these files can be included in other dwc3 source files and
be compiled in uboot. Also added otg.h which has the defines for dr_mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
9de1115de7 usb: dwc3: remove trace_* APIs from dwc3 driver
Removed most of the trace_* APIs from dwc3 driver since tracepoints are not
supported in u-boot. Replaced some of the trace_* API with dev_dbg/dev/vdbg.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Review-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:09 +02:00
Kishon Vijay Abraham I
30c31d5897 usb: dwc3: Modify the file headers to u-boot format
Modified the file header to the format that is used in u-boot. Also
included in the header, the commit in linux kernel from which each of
these files are added.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:08 +02:00
Kishon Vijay Abraham I
97798eb96d usb: dwc3: remove un-used files from dwc3 folder
removed un-used/un-supported files from dwc3. These files can be added
later as and when the support is added.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:08 +02:00
Kishon Vijay Abraham I
85d5e7075f usb: dwc3: add dwc3 folder from linux kernel to u-boot
Added dwc3 folder from linux kernel 3.19-rc1 (97bf6af1f9)
to u-boot. This will be adapted to work with u-boot in the
following patches.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:08 +02:00