Commit Graph

94 Commits

Author SHA1 Message Date
Marek Behún
51be471663 fs: ext4: Do not print mount fail message when not ext4 filesystem
Other filesystem drivers don't do this.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
2018-03-09 12:31:07 -05:00
Tuomas Tynkkynen
3d22bae57f fs: Migrate ext4 to Kconfig
Migrate the following symbols to Kconfig:

CONFIG_FS_EXT4
CONFIG_EXT4_WRITE

The definitions in config_fallbacks.h can now be expressed in Kconfig.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:30 -05:00
Ian Ray
ecdfb4195b ext4: recover from filesystem corruption when reading
Some fixes when reading EXT files and directory entries were identified
after using e2fuzz to corrupt an EXT3 filesystem:

 - Stop reading directory entries if the offset becomes badly aligned.

 - Avoid overwriting memory by clamping the length used to zero the buffer
   in ext4fs_read_file.  Also sanity check blocksize.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-20 09:58:31 +01:00
Tom Rini
fa9ca8a5d2 fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls
As reported by Coverity, we did not free dirnode in the case of failure.
Do so now.

Reported-by: Coverity (CID: 131221)
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:22 -04:00
Tuomas Tynkkynen
385b731855 fs/ext4: Fix group descriptor checksum calculation
The current code doesn't compute the group descriptor checksum correctly
for the filesystems that e2fsprogs 1.43.4 creates (they have
'Group descriptor size: 64' as reported by tune2fs). Extend the checksum
calculation to be done as ext4_group_desc_csum() does in Linux.

This fixes these errors in dmesg from running fs-test.sh and makes it
succeed again:

[1671902.620699] EXT4-fs (loop1): ext4_check_descriptors: Checksum for group 0 failed (35782!=10965)
[1671902.620706] EXT4-fs (loop1): group descriptors corrupted!

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:18 -04:00
Marek Behún
5994e8b643 fs: Create a common fs_devread for ext4/reiserfs/zfs
The ext4, reiserfs and zfs filesystems all have their own implementation
of the same function, *_devread. Generalize this function into fs_devread
and put the code into fs/fs_internal.c.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
[trini: Move fs/fs_internal.o hunk to the end of fs/Makefile as all
cases need it]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-02 21:51:50 -04:00
Tom Rini
10b078d836 fs: ext4: Fix journal overrun issue reported by Coverity
While &p_jdb[fs->blksz] is a valid expression (it points *one* char
sized element past the end of the array, e.g. &p_jdb[fs->blksz + 1] is
invalid (according to the C standard (C99/C11)).

Changing this to tag = (struct ext3_journal_block_tag *)(p_jdb + ofs);

Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Suggested-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reported-by: Coverity (CID: 165117, 165110)
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-08-26 14:56:13 -04:00
Lokesh Vutla
509b498a50 ext4: Fix comparision of unsigned expression with < 0
In file ext4fs.c funtion ext4fs_read_file() compares an
unsigned expression with < 0 like below

	lbaint_t blknr;
	blknr = read_allocated_block(&(node->inode), i);
	if (blknr < 0)
		return -1;

blknr is of type ulong/uint64_t. read_allocated_block() returns
long int. So comparing blknr with < 0 will always be false. Instead
declare blknr as long int.

Similarly ext4/dev.c does a similar comparison. Drop the redundant
comparison.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-27 16:49:09 -04:00
Stefan Brüns
3cc5bbb8e6 fs/ext4: Initialize group descriptor size for revision level 0 filesystems
genext2fs creates revision level 0 filesystems, which are not readable
by u-boot due to the initialized group descriptor size field.
f798b1dda1

Reported-by: Kever Yang <kever.yang@rock-chips.com>
Reported-by: FrostyBytes@protonmail.com
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2016-12-27 11:24:18 -05:00
Stefan Brüns
66a47ff2d8 ext4: Allow reading files with non-zero offset, clamp read len
Support was already implemented, but not hooked up. This fixes several
fails in the test cases.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-21 14:07:27 -05:00
Stefan Brüns
f81db56f2f ext4: Fix handling of sparse files
A sparse file may have regions not mapped by any extents, at the start
or at the end of the file, or anywhere between, thus not finding a
matching extent region is never an error.

Found by python filesystem tests.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-11-21 14:07:27 -05:00
Stefan Brüns
805e3e00f2 ext4: Only write journal entries for modified blocks in unlink_filename
Instead of creating a journal entry for each directory block, even
if the block is unmodified, only log the modified block.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-10-24 08:04:37 -04:00
Stefan Brüns
d1bdf22461 ext4: Fix handling of direntlen in unlink_filename
The direntlen checks were quite bogus, i.e. the loop termination used
"len + offset == blocksize" (exact match only), and checked for a
direntlen less than 0. The latter can never happen as the len is
unsigned, this has been reported by Coverity, CID 153384.

Use the same code as in search_dir for directory traversal. This code
has the correct checks for direntlen >= sizeof(struct dirent), and
offset < blocksize.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reported-by: Coverity (CID: 153383, 153384)
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-10-24 08:04:36 -04:00
Stefan Brüns
15bf8c4f93 ext4: cleanup unlink_filename function
Use the same variable names as in search_dir, to make purpose of variables
more obvious.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24 08:04:36 -04:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Stefan Brüns
b4976b49a0 ext4: Revert rejection of 64bit enabled ext4 fs
Enable mounting of ext4 fs with 64bit feature, as it is supported now.
These had been disabled in 6f94ab6656.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:20:16 -04:00
Stefan Brüns
749e93ee18 ext4: Respect group descriptor size when adjusting free counts
Also adjust high 16/32 bits when free inode/block counts are modified.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:20:16 -04:00
Stefan Brüns
688d0e79f6 ext4: Use helper function to access group descriptor and its fields
The descriptor size is variable, thus array indices are not generically
applicable. The larger group descriptors also contain e.g. high parts
of block numbers, which have to be read and written.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:20:15 -04:00
Stefan Brüns
f798b1dda1 ext4: Use correct descriptor size when reading the block group descriptor
The correct descriptor size must be used when calculating offsets, and
also to read the correct amount of data.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:18:57 -04:00
Stefan Brüns
9f5dd8b6e2 ext4: Add helper functions for block group descriptor field access
The helper functions encapsulate access of the block group descriptors,
independent of group descriptor size. The helpers also deal with the
endianess of the fields, and with split fields like free_blocks/
free_blocks_high.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:18:56 -04:00
Stefan Brüns
fc214ef909 ext4: determine group descriptor size for 64bit feature
If EXT4_FEATURE_INCOMPAT_64BIT is set, the descriptor can be read from
the superblocks, otherwise it defaults to 32.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:18:56 -04:00
Stefan Brüns
b1edcf0d80 ext4: Fix memory leak of journal buffer if block is updated multiple times
If the same block is updated multiple times in a row during a single
file system operation, gd_index is decremented to use the same journal
entry again. Avoid loosing the already allocated buffer.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:02:44 -04:00
Stefan Brüns
de9e831675 ext4: Correct block number handling, empty block vs. error code
read_allocated block may return block number 0, which is just an indicator
a chunk of the file is not backed by a block, i.e. it is sparse.

During file deletions, just continue with the next logical block, for other
operations treat blocknumber <= 0 as an error.

For writes, blocknumber 0 should never happen, as U-Boot always allocates
blocks for the whole file.  Reading already handles this correctly, i.e. the
read buffer is 0-fillled.

Not treating block 0 as sparse block leads to FS corruption, e.g.
	./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
		ext4write host 0 0 /2.5GB.file 1 '
The 2.5GB.file from the fs test is actually a sparse file.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:02:44 -04:00
Stefan Brüns
b779e0290a ext4: remove duplicated block release code for extents
The data blocks are identical for files using traditional direct/indirect
block allocation scheme and extent trees, thus this code part can be
common. Only the code to deallocate the indirect blocks to record the
used blocks has to be seperate, respectively the code to release extent
tree index blocks.

Actually the code to release the extent tree index blocks is still missing,
but at least add a FIXME at the appropriate place.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 09:02:43 -04:00
Stefan Brüns
87f9fdc08d ext4: initialize full inode for inodes bigger than 128 bytes
Make sure the the extra_isize field (offset 128) is initialized to 0, to
mark any extra data as invalid.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:42 -04:00
Stefan Brüns
290ce2f95a ext4: Use correct value for inode size even on revision 0 filesystems
fs->inodesz is already correctly (i.e. dependent on fs revision)
initialized in ext4fs_mount.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:42 -04:00
Stefan Brüns
87a40b6e03 ext4: Fix memory leak in case of failure
temp_ptr should always be freed, even if the function is left via
goto fail.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:41 -04:00
Stefan Brüns
0ceef3d371 ext4: Avoid out-of-bounds access of block bitmap
If the blocksize is 1024, count is initialized with 1. Incrementing count
by 8 will never match (count == fs->blksz * 8), and ptr may be
incremented beyond the buffer end if the bitmap is filled. Add the
startblock offset after the loop.

Remove the second loop, as only the first iteration will be done.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:40 -04:00
Stefan Brüns
a9fa0ed183 ext4: After completely filled group, scan next group from the beginning
The last free block of a block group may be in its middle. After it has
been allocated, the next block group should be scanned from its beginning.

The following command triggers the bad behaviour (on a blocksize 1024 fs):

./sandbox/u-boot -c 'i=0; host bind 0 ./disk.raw ;
	while test $i -lt 260 ; do echo $i; setexpr i $i + 1;
		ext4write host 0:2 0 /X${i} 0x1450; done ;
	ext4write host 0:2 0 /X240 0x2000 ; '

When 'X240' is extended from 5200 byte to 8192 byte, the new blocks should
start from the first free block (8811), but it uses the blocks 8098-8103
and 16296-16297 -- 8103 + 1 + 8192 = 16296. This can be shown with
debugfs, commands 'ffb' and 'stat X240'.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:40 -04:00
Stefan Brüns
e927265225 ext4: Do not clear zalloc'ed buffers a second time
zero_buffer is never written, thus clearing it is pointless.
journal_buffer is completely initialized by ext4fs_devread (or in case
of failure, not used).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:39 -04:00
Stefan Brüns
398d6fad92 ext4: Only update number of of unused inodes if GDT_CSUM feature is set
e2fsck warns about "Group descriptor 0 marked uninitialized without
feature set."
The bg_itable_unused field is only defined if FEATURE_RO_COMPAT_GDT_CSUM
is set, and should be set (kept) zero otherwise.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:39 -04:00
Stefan Brüns
b7dd40d052 ext4: Scan all directory blocks when looking up an entry
Scanning only the direct blocks of the directory file may falsely report
an existing file as nonexisting, and worse can also lead to creation
of a duplicate entry on file creation.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:38 -04:00
Stefan Brüns
10a7a1b8ba ext4: Avoid corruption of directories with hash tree indexes
While directories can be read using the old linear scan method, adding a
new file would require updating the index tree (alternatively, the whole
tree could be removed).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:37 -04:00
Stefan Brüns
a321abd54f ext4: Scan all directory blocks for space when inserting a new entry
Previously, only the last directory block was scanned for available space.
Instead, scan all blocks back to front, and if no sufficient space is
found, eventually append a new block.
Blocks are only appended if the directory does not use extents or the new
block would require insertion of indirect blocks, as the old code does.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:36 -04:00
Stefan Brüns
b96c3c7292 ext4: Do not crash when trying to grow a directory using extents
The following command crashes u-boot:
./sandbox/u-boot -c 'i=0; host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
  while test $i -lt 200 ; do echo $i; setexpr i $i + 1;
  ext4write host 0 0 /foobar${i} 0; done'

Previously, the code updated the direct_block even for extents, and
fortunately crashed before pushing garbage to the disk.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:36 -04:00
Stefan Brüns
a0d767e2c1 ext4: propagate error if creation of directory entry fails
In case the dir entry creation failed, ext4fs_write would later overwrite
a random inode, as inodeno was never initialized.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:35 -04:00
Stefan Brüns
76a29519ff ext4: fix possible crash on directory traversal, ignore deleted entries
The following command triggers a segfault in search_dir:
./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
    ext4write host 0 0 /./foo 0x10'

The following command triggers a segfault in check_filename:
./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
    ext4write host 0 0 /. 0x10'

"." is the first entry in the directory, thus previous_dir is NULL. The
whole previous_dir block in search_dir seems to be a bad copy from
check_filename(...). As the changed data is not written to disk, the
statement is mostly harmless, save the possible NULL-ptr reference.

Typically a file is unlinked by extending the direntlen of the previous
entry. If the entry is the first entry in the directory block, it is
invalidated by setting inode=0.

The inode==0 case is hard to trigger without crafted filesystems. It only
hits if the first entry in a directory block is deleted and later a lookup
for the entry (by name) is done.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23 09:02:34 -04:00
Michael Walle
011bc3342a ext4: fix wrong usage of le32_to_cpu()
le32_to_cpu() must only convert the revision_level and not the boolean
result.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:05 -04:00
Michael Walle
58a9ecbaf4 ext4: fix endianess problems in ext4 write support
All fields were accessed directly instead of using the proper byte swap
functions. Thus, ext4 write support was only usable on little-endian
architectures. Fix this.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:04 -04:00
Michael Walle
7f101be314 ext4: use kernel names for byte swaps
Instead of __{be,le}{16,32}_to_cpu use {be,le}{16,32}_to_cpu.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:02 -04:00
Michael Walle
2a0b7a971a ext4: change structure fields to __le/__be types
Change all the types of ext2/4 fields to little endian types and all the
JBD fields to big endian types. Now we can use sparse (make C=1) to check
for statements where we need byteswaps.

Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23 09:02:01 -04:00
Tom Rini
6f94ab6656 ext4: Refuse to mount filesystems with 64bit feature set
With e2fsprogs after 1.43 the 64bit and metadata_csum features are
enabled by default.  The metadata_csum feature changes how
ext4_group_desc->bg_checksum is calculated, which would break write
support.  The 64bit feature however introduces changes such that it
cannot be read by implementations that do not support it.  Since we do
not support this, we must not mount it.

Cc: Stephen Warren <swarren@nvidia.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stefan Roese <sr@denx.de>
Reported-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:14 -04:00
Ronald Zachariah
37f23885e4 fs: ext4: fix symlink read function
The function ext4fs_read_symlink was unable to handle a symlink
which had target name of exactly 60 characters.

Signed-off-by: Ronald Zachariah <rozachar@cisco.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Cc: Tom Rini <trini@konsulko.com>
2016-05-02 13:33:19 -04:00
Simon Glass
2a981dc2c6 dm: block: Adjust device calls to go through helpers function
To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.

Use inline functions to avoid increasing code size on some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
4101f68792 dm: Drop the block_dev_desc_t typedef
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Tom Rini
495c3a1e22 ext4_common.c: Clean up failure cases in alloc_triple_indirect_block
As noted by Coverity, when we have an error in
alloc_triple_indirect_block we will leak ti_pbuff_start_addr as it's not
being freed.  Further inspection here shows that we could also leak
ti_cbuff_start_addr in one corner case so free that as well.

Reported-by: Coverity (CID 131205, 131206)
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:20 -05:00
Stephen Warren
7c4213f6a5 block: pass block dev not num to read/write/erase()
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:18 -05:00
Thomas Fitzsimmons
54d68e9333 fs: ext4: Prevent infinite loop in ext4fs_iterate_dir
If the ext3 journal gets out of sync with what is written on disk, for
example because of an unexpected power cut, ext4fs_read_file can
return an all-zero directory entry.  In that case, ext4fs_iterate_dir
would infinite loop.

This patch detects when a directory entry's direntlen member is 0 and
returns a failure status, which breaks out of the infinite loop.  As a
result, U-Boot will not find files that may subsequently be recovered
when the journal is replayed.

This is better behaviour than hanging in an infinite loop, but as a
further improvement maybe U-Boot could interpret the ext3 journal and
actually find the unsynced entries.

Signed-off-by: Thomas Fitzsimmons <fitzsim@cisco.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-11-23 11:01:52 -05:00
Gary Bisson
9d2f6a9ae7 fs: ext4: fix symlink read function
Since last API changes for files >2GB, the read of symlink is broken as
ext4fs_read_file now returns 0 instead of the length of the actual read.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2015-09-11 17:15:29 -04:00
Stephen Warren
d56b2015e6 ext4: fix leak in check_filename()
root_first_block_buffer should be free()d in all cases, not just when an
error occurs. Fix the success exit path of the function to do this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:23 -04:00