Commit Graph

1061 Commits

Author SHA1 Message Date
Vipin KUMAR
7da6923604 SPEAr : Support added for SPEAr320 board
SPEAr320 SoC support contains basic spear320 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
080cfee714 SPEAr : Support added for SPEAr310 board
SPEAr310 SoC support contains basic spear310 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
7e074158ce SPEAr : Support added for SPEAr300 board
SPEAr300 SoC support contains basic spear300 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
566c9c16fe SPEAr : Support added for SPEAr600 board
SPEAr600 SoC support contains basic spear600 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:49 -06:00
Mike Frysinger
c7c0d542a1 tools: allow people to compile w/out configuring
It's useful to be able to build up the host tools without having to select
a board first.  Pretty much all tools in there are config-independent
anyways.

Also add a shortcut "tools-all" to quickly build all host tools that are
actually config-independent to allow for simple test builds.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21 23:00:08 +01:00
Matthias Weisser
34be106517 Removing Atmel from ARM926EJ-S Systems
Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2010-01-21 22:52:06 +01:00
Daniel Hobi
2a9987935e Makefile: fix parallel build
During parallel build, the top Makefile spawns multiple sub-makes for
targets in cpu/$(CPU) and $(dir $(LDSCRIPT)). If the .depend files are
not present in these directories, the sub-makes may end up generating
these files simultaneously which leads to corrupted content.

A typical error message is:

.depend:39: *** multiple target patterns.  Stop.

This patch serializes the creation of .depend in cpu/$(CPU) and
$(dir $(LDSCRIPT)) by adding these directories to the depend target
in the top Makefile.

Other directories in $(LIBS) are not affected since they contain only
one Make target and thus only one sub-make is spawned per directory.

Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18 22:25:16 +01:00
Harald Krapfenbauer
2aeda2d054 Blackfin: tcm-bf518: new board port
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Michael Hennerich
10eafa10be Blackfin: add support for BF527-EZKIT v2.1
The new board revision has a different LCD.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Valentin Yakovenkov
446707c90f Blackfin: bf561-acvilon: new board port
Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:26 -05:00
Mike Frysinger
76d82187c6 Blackfin: tweak embedded LDR env config option
Use the common config option for extracting the environment for embedding
into LDR files and clarify the LDR-specific option.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:26 -05:00
Reinhard Arlt
1dee9be683 mpc83xx: Add support for MPC8349 esd caddy2
The caddy2 is a variant of the already supported vme8349. So we just
add the differences to this board port. To better support those two
boards we switched from fixed SDRAM configuration to usage of
spd_sdram(). This is done by providing a board specific SPD EEPROM
routine with different values for both boards.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

changed to use mkconfig -t option instead, plus misc codingstyle fixes.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-07 18:34:31 -06:00
Anton Vorontsov
2e95004deb mpc83xx: Add NAND boot support for MPC8315E-RDB boards
The core support for NAND booting is there already, so this patch
is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to
be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code
from mpc8313erdb boards, and so to not duplicate the code we just
symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

o silence make during ln echo
o update documentation
o and avoid:

$ ./MAKEALL MPC8315ERDB_NAND
Configuring for MPC8315ERDB board...
sdram.o: In function `fixed_sdram':
/home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay'

by renaming udelay -> __udelay in the spirit of commit
3eb90bad65 "Generic udelay() with watchdog
support".

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-07 18:33:52 -06:00
Wolfgang Denk
f7767c7541 Merge branch 'master' of git://git.denx.de/u-boot-usb 2009-12-21 21:01:56 +01:00
Tom Rix
bffbb2a86d TWL4030 Add usb PHY support
The twl4030 provides a PHY device for connecting a link device,
like musb, to physical connection.

This change adds the twl4030 usb registers and functions for
initializing the PHY as required by omap3.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20 12:47:37 +01:00
Li Yang
e5e4e705ce Update Makefile for tag generating
Get tag directories from the $(__LIB) and also generate tag for .S files.

Signed-off-by: Li Yang <leoli@freescale.com>
2009-12-17 22:57:54 +01:00
Wolfgang Denk
bb3bcfa242 Merge branch 'next' of ../next 2009-12-15 23:38:34 +01:00
Wolfgang Denk
a200a7c04d Update CHANGELOG; prepare Prepare v2009.11
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-15 23:20:54 +01:00
Wolfgang Denk
35e3717772 Merge branch 'master' of ../work into next 2009-12-07 23:42:33 +01:00
Wolfgang Denk
0fc52948bd Update CHANGELOG, prepare -rc2
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-07 23:14:13 +01:00
Wolfgang Denk
206c00f26f Merge branch 'master' into next
Conflicts:
	lib_generic/zlib.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-07 22:47:17 +01:00
Wolfgang Denk
8cbf4e4f17 Fix out-of-tree building of "apollon" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-06 00:27:06 +01:00
Po-Yu Chuang
43a5f0df2f arm: A320: Add support for Faraday A320 evaluation board
This patch adds support for A320 evaluation board from Faraday. This board
uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM.
FA526 is an ARMv4 processor and uses the ARM920T source in this patch.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2009-11-27 16:26:17 -06:00
Sekhar Nori
2819e1365b TI DA8xx: Integrate DA830 EVM support into U-Boot
Integrate DA830 EVM support into U-Boot.

Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum
Digital EVM board. See http://www.spectrumdigital.com/

Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-27 16:26:16 -06:00
Wolfgang Grandegger
cd12f615e4 mpc52xx: add support for the IPEK01 board
This patch adds support for the board IPEK01 based on the MPC5200.
The Futjitsu Lime graphics controller is configured in 16 bpp mode.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2009-10-31 16:14:35 +01:00
Wolfgang Denk
4946775c6d Coding Style cleanup; update CHANGELOG, prepare -rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-10-28 00:49:47 +01:00
Wolfgang Denk
922754cc82 Merge branch 'master-sync' of git://git.denx.de/u-boot-arm 2009-10-24 22:26:09 +02:00
Tom Rix
e63e5904b4 TI OMAP3 SDP3430: Initial Support
Start of support of
Texas Instruments Software Development Platform(SDP)
for OMAP3430 - SDP3430

Highlights of this platform are:
Flash Memory devices:
	Sibley NOR, Micron 8bit NAND and OneNAND
Connectivity:
	3 UARTs and expanded 4 UART ports + IrDA
	Ethernet, USB
Other peripherals:
	TWL5030 PMIC+Audio+Keypad
	VGA display
Expansion ports:
	Memory devices plugin boards (PISMO)
	Connectivity board for GPS,WLAN etc.
Completely configurable boot sequence and device mapping
etc.

Support default jumpering and:
 - UART1/ttyS0 console(legacy sdp3430 u-boot)
 - UART3/ttyS2 console (matching other boards,
		 and SDP HW docs)
 - Ethernet
 - mmc0
 - NOR boot

Currently the UART1 is enabled by default.  for
compatibility with other OMAP3 u-boot platforms,
enable the #define of CONSOLE_J9.

Conflicts:

	Makefile

Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
to it is alphabetically sorted location above zoom1.

Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-24 09:55:25 -05:00
Sandeep Paulraj
5df65cf56a TI: DaVinci: DM355 Leopard board support
This patch adds support for the leopard board which is
based on the DM355 SOC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Sandeep Paulraj
6ab176d709 TI DaVinci DM646x: Adding initial support for DM6467 EVM
This patch adds the initial support for DM6467 EVM.
Other features like NET and NAND support will be added as follow up patches.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Mike Frysinger
9f4a420663 new default shortcut to config & build a board
The majority of the time that I build things in U-Boot, I want to just
build for the board.  I don't make board config tweaks after selecting the
board.  So add a new pattern rule that allows people to combine two steps
in one go:
	`make foo_config && make` => `make foo`

This shouldn't conflict with any existing make rules as the pattern rule
is used only the rule doesn't already exist.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-18 22:56:06 +02:00
Dipen Dudhat
fad15096e3 ppc/P1_P2_RDB: On-chip BootROM support
On Chip BootROM support for P1 and P2 series RDB platforms.

This patch is derived from latest On Chip BootROM support on MPC8536DS

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-16 10:21:39 -05:00
Dipen Dudhat
f7780ec977 ppc/P1_P2_RDB: NAND Boot Support
NAND Boot support for P1 and P2 series RDB platforms.

This patch is derived from NAND Boot support on MPC8536DS.

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-16 10:21:39 -05:00
Minkyu Kang
8bc4ee9e82 s5pc1xx: add support SMDKC100 board
Adds new board SMDKC100 that uses s5pc100 SoC

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
2009-10-13 21:13:55 -05:00
Simon Kagstrom
e92daeb5c2 Support for the OpenRD base board
The implementation is borrowed from the sheevaplug board and the Marvell
1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-10-13 06:17:36 -05:00
Tom Rix
23b80982a0 Add support for Eukrea CPU9260/CPU9G20 SBC
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:35 -05:00
Tom Rix
d8380c9d35 Add support for Eukrea CPUAT91 SBC
CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR
flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII
mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:35 -05:00
Wolfgang Denk
1d96cfe8f5 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2009-09-30 23:39:36 +02:00
Wolfgang Denk
7529b4445b Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-09-30 23:34:36 +02:00
Mingkai Hu
e40ac4870c On-chip ROM boot: MPC8536DS support
The MPC8536E is capable of booting from the on-chip ROM - boot from
eSDHC and boot from eSPI. When power on, the porcessor excutes the
ROM code to initialize the eSPI/eSDHC controller, and loads the mian
U-Boot image from the memory device that interfaced to the controller,
such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
L2SRAM, then boot from it.

The memory device should contain a specific data structure with control
word and config word at the fixed address. The config word direct the
process how to config the memory device, and the control word direct
the processor where to find the image on the memory device, or where
copy the main image to. The user can use any method to store the data
structure to the memory device, only if store it on the assigned address.

The on-chip ROM code will map the whole 4GB address space by setting
entry0 in the TLB1, so the main image need to switch to Address space 1
to disable this mapping and map the address space again.

This patch implements loading the mian U-Boot image into L2SRAM, so
the image can configure the system memory by using SPD EEPROM.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:11 -05:00
Mingkai Hu
9a1a0aedbb NAND boot: MPC8536DS support
MPC8536E can support booting from NAND flash which uses the
image u-boot-nand.bin. This image contains two parts: a 4K
NAND loader and a main U-Boot image. The former is appended
to the latter to produce u-boot-nand.bin. The 4K NAND loader
includes the corresponding nand_spl directory, along with the
code twisted by CONFIG_NAND_SPL. The main U-Boot image just
like a general U-Boot image except the parts that included by
CONFIG_SYS_RAMBOOT.

When power on, eLBC will automatically load from bank 0 the
4K NAND loader into the FCM buffer RAM where CPU can execute
the boot code directly. In the first stage, the NAND loader
copies itself to RAM or L2SRAM to free up the FCM buffer RAM,
then loads the main image from NAND flash to RAM or L2SRAM
and boot from it.

This patch implements the NAND loader to load the main image
into L2SRAM, so the main image can configure the RAM by using
SPD EEPROM. In the first stage, the NAND loader copies itself
to the second to last 4K address space, and uses the last 4K
address space as the initial RAM for stack.

Obviously, the size of L2SRAM shouldn't be less than the size
of the image used. If so, the workaround is to generate another
image that includes the code to configure the RAM by SPD and
load it to L2SRAM first, then relocate the main image to RAM
to boot up.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:06 -05:00
Kyungmin Park
ca6189db48 Refactor OneNAND IPL code
Refactoring the OneNAND IPL code

and some minor fixed:
- Remove unnecessary header file
- Fix wrong access at read interrupt
- The recent OneNAND has 4KiB pagesize

Also Board can override OneNAND IPL image

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2009-09-28 14:17:56 -05:00
Paul Gortmaker
00ec0ff549 sbc8349: tidy up Makefile to use new configuration script.
Commit 804d83a5 allows us to move all the configuration
variation tweaks out of the top level Makefile and down
into the board config header.  This takes advantage of
that for the sbc8349 board.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-09-25 18:27:54 -05:00
Paul Gortmaker
928435d11b sbc85x0: tidy up Makefile to use new configuration script.
Commit 804d83a5 allows us to move all the configuration
variation tweaks out of the top level Makefile and down
into the boards config header.  This takes advantage of
that for the sbc8540/sbc8560 boards.

There were a couple of cheezy comments pointing at incorrect
files, or files that don't exist, so I've cleaned those up too.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:05:00 -05:00
Paul Gortmaker
2738bc8df6 sbc8548: allow enabling PCI via a make config option
Prior to this commit, to enable PCI, you had to go manually
edit the board config header, and if you had 33MHz PCI, you
had to manually change CONFIG_SYS_NS16550_CLK too, which was
not real user friendly,

This adds the typical PCI and clock speed make targets to the
toplevel Makefile in accordance with what is being done with
other boards (i.e. using the "-t" to mkconfig).

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:05:00 -05:00
Kumar Gala
62ca21c442 ppc/85xx: Simplify the top makefile for P1_P2_RDB boards
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:04:58 -05:00
Kumar Gala
a0f9e0e0f0 ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:04:57 -05:00
Kumar Gala
f9edcc10e6 ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:04:57 -05:00
Mingkai Hu
0e905ac28b ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:04:57 -05:00
Wolfgang Denk
041a6a0c2e Merge branch 'master' of git://git.denx.de/u-boot-microblaze 2009-09-15 21:45:50 +02:00