Commit Graph

221 Commits

Author SHA1 Message Date
Simon Glass
a327dee0f4 dm: Add child_pre_probe() and child_post_remove() methods
Some devices (particularly bus devices) must track their children, knowing
when a new child is added so that it can be set up for communication on the
bus.

Add a child_pre_probe() method to provide this feature, and a corresponding
child_post_remove() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
e59f458de6 dm: Introduce per-child data for devices
Some device types can have child devices and want to store information
about them. For example a USB flash stick attached to a USB host
controller would likely use this space. The controller can hold
information about the USB state of each of its children.

The data is stored attached to the child device in the 'parent_priv'
member. It can be auto-allocated by dm when the child is probed. To
do this, add a per_child_auto_alloc_size value to the parent driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
997c87bb0b dm: Add functions to access a device's children
Devices can have childen that can be addressed by a simple index, the
sequence number or a device tree offset. Add functions to access a child
in each of these ways.

The index is typically used as a fallback when the sequence number is not
available. For example we may use a serial UART with sequence number 0 as
the console, but if no UART has sequence number 0, then we can fall back
to just using the first UART (index 0).

The device tree offset function is useful for buses, where they want to
locate one of their children. The device tree can be scanned to find the
offset of each child, and that offset can then find the device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
1ca7e2062b dm: Provide a function to scan child FDT nodes
At present only root nodes in the device tree are scanned for devices.
But some devices can have children. For example a SPI bus may have
several children for each of its chip selects.

Add a function which scans subnodes and binds devices for each one. This
can be used for the root node scan also, so change it.

A device can call this function in its bind() or probe() methods to bind
its children.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:36 +01:00
Simon Glass
c910e2e2da dm: Avoid accessing uclasses before they are ready
Don't allow access to uclasses before they have been initialised.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:26 +01:00
Simon Glass
f4cdead24a dm: Allow a device to be found by its FDT offset
Each device that was bound from a device tree has an node that caused it to
be bound. Add functions that find and return a device based on a device tree
offset.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
b7d665705e dm: Display the sequence number for each device
Add this information to 'dm tree' and 'dm uclass' commands.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
5a66a8ff86 dm: Introduce device sequence numbering
In U-Boot it is pretty common to number devices from 0 and access them
on the command line using this numbering. While it may come to pass that
we will move away from this numbering, the possibility seems remote at
present.

Given that devices within a uclass will have an implied numbering, it
makes sense to build this into driver model as a core feature. The cost
is fairly small in terms of code and data space.

With each uclass having numbered devices we can ask for SPI port 0 or
serial port 1 and receive a single device.

Devices typically request a sequence number using aliases in the device
tree. These are resolved when the device is probed, to deal with conflicts.
Sequence numbers need not be sequential and holes are permitted.

At present there is no support for sequence numbers using static platform
data. It could easily be added to 'struct driver_info' if needed, but it
seems better to add features as we find a use for them, and the use of -1
to mean 'no sequence' makes the default value somewhat painful.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
4e8bc21170 dm: Avoid activating devices in 'dm uclass' command
This command currently activates devices as it lists them. This is not
desirable since it changes the system state. Fix it and avoid printing
a newline if there are no devices in a uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
fffa24d7c5 dm: Move device display into its own function
The device display for 'dm tree' and 'dm uclass' is mostly the same, so
move it into a common function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
00606d7e39 dm: Allow drivers to be marked 'before relocation'
Driver model currently only operates after relocation is complete. In this
state U-Boot typically has a small amount of memory available. In adding
support for driver model prior to relocation we must try to use as little
memory as possible.

In addition, on some machines the memory has not be inited and/or the CPU
is not running at full speed or the data cache is off. These can reduce
execution performance, so the less initialisation that is done before
relocation the better.

An immediately-obvious improvement is to only initialise drivers which are
actually going to be used before relocation. On many boards the only such
driver is a serial UART, so this provides a very large potential benefit.

Allow drivers to mark themselves as 'pre-reloc' which means that they will
be initialised prior to relocation. This can be done either with a driver
flag or with a 'dm,pre-reloc' device tree property.

To support this, the various dm scanning function now take a 'pre_reloc_only'
parameter which indicates that only drivers marked pre-reloc should be
bound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:24 +01:00
Simon Glass
7497812d47 dm: Make sure that the root device is probed
The root device should be probed just like any other device. The effect of
this is to mark the device as activated, so that it can be removed (along
with its children) if required.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2014-07-23 14:07:24 +01:00
Simon Glass
eb9ef5fee7 dm: Use an explicit expect value in core tests
Rather than reusing the 'reg' property, use an explicit property for the
expected ping value used in testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:23 +01:00
Simon Glass
4af5b1445c dm: Use '*' to indicate a device is activated
Make both dm enumeration commands support showing whether a driver is active
or not, and use a consistent indicator (an asterisk).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2014-06-21 10:12:43 -06:00
Simon Glass
184b1b7175 dm: Fix printf() strings in the 'dm' command
The values here are int, but the map_to_sysmem() call can return a long.
Add a cast to deal with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:56:28 -06:00
Simon Glass
b6a49a7ae7 dm: Allow driver model tests only for sandbox
The GPIO tests require the sandbox GPIO driver, so cannot be run on other
platforms. Similarly for the 'dm test' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:55:52 -06:00
Simon Glass
ae7f451308 dm: Rename struct device_id to udevice_id
It is best to avoid having any occurence of 'struct device' in driver
model, so rename to achieve this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:55:18 -06:00
Heiko Schocher
54c5d08a09 dm: rename device struct to udevice
using UBI and DM together leads in compiler error, as
both define a "struct device", so rename "struct device"
in include/dm/device.h to "struct udevice", as we use
linux code (MTD/UBI/UBIFS some USB code,...) and cannot
change the linux "struct device"

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
2014-05-27 10:21:32 -04:00
Simon Glass
96495d90fe dm: Add GPIO support and tests
Add driver model support for GPIOs. Since existing GPIO drivers do not use
driver model, this feature must be enabled by CONFIG_DM_GPIO. After all
GPO drivers are converted over we can perhaps remove this config.

Tests are provided for the sandbox implementation, and are a sufficient
sanity check for basic operation.

The GPIO uclass understands the concept of named banks of GPIOs, with each
GPIO device providing a single bank. Within each bank the GPIOs are numbered
using an offset from 0 to n-1. For example a bank named 'b' with 20
offsets will provide GPIOs named b0 to b19.

Anonymous GPIO banks are also supported, and are just numbered without any
prefix.

Each time a GPIO driver is added to the uclass, the GPIOs are renumbered
accordinging, so there is always a global GPIO numbering order.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:30 -05:00
Simon Glass
0681195977 dm: Add a 'dm' command for testing
This command is not required for driver model operation, but can be useful
for testing. It provides simple dumps of internal data structures.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:29 -05:00
Simon Glass
2e7d35d2a6 dm: Add basic tests
Add some tests of driver model functionality. Coverage includes:

- basic init
- binding of drivers to devices using platform_data
- automatic probing of devices when referenced
- availability of platform data to devices
- lifecycle from bind to probe to remove to unbind
- renumbering within a uclass when devices are probed/removed
- calling driver-defined operations
- deactivation of drivers when removed
- memory leak across creation and destruction of drivers/uclasses
- uclass init/destroy methods
- automatic probe/remove of children/parents when needed

This function is enabled for sandbox, using CONFIG_DM_TEST.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-04 12:15:29 -05:00