Commit Graph

117 Commits

Author SHA1 Message Date
Jean-Jacques Hiblot
fb1b7712ad power: make most tps drivers and the twl4030 driver compatible with DM_I2C
Those driver are not DM drivers per se (not using the PMIC/regulator
framework) and are using the legacy I2C API. Make them compatible with
the DM_I2C API.

This impacts the following drivers:
- palmas (used by am57xx/dra7xx evms)
- tps65218 (used by am43xx evms)
- tps65217 and tps65910 (used by am335x evms and am335x boneblack vboot)
- twl4030 (used by omap3_logicpd)
- tps65217 (used by brppt1)
- twl6030

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 06:17:30 +01:00
Christophe Kerello
844f9bf1ee power: regulator: stpmu1: add power off delay
This patch adds a delay when regulators are disabled.
This delay is set to 5 ms to cover all use cases.
The worst use case actually seen is during a SD card power cycle.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-19 16:31:36 -04:00
Trent Piepho
7da7ff5491 power: pmic: Let PFUZE3000 see all 256 registers
The PFUZE3000 uses registers addresses up to 0xff.

The DM pfuze100 driver supports both pfuze100 and pfuze3000.  Allow it
to use the device type to return the correct number of registers.

Also rename the too generic PMIC_NUM_OF_REGS enumeration value for
pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the
pfuze100 enumeration value PFUZE100_NUM_OF_REGS.

Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-27 09:47:46 +02:00
Lukasz Majewski
b8a6d6777b pmic: Add support for setting transmission length in uclass private data
The struct uc_pmic_priv's trans_len field stores the number of types to
be transmitted per PMIC transfer.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18 08:27:26 +02:00
Marcel Ziswiler
de42975141 power: as3722: add as3722_ldo_set_voltage signature to header file
Just like the already present as3722_sd_set_voltage() add the currently
missing signature of the as3722_ldo_set_voltage() function to its header
file.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:21 -07:00
Marcel Ziswiler
4616e33b6a power: as3722: fix ldo_get/set_enable for ldo index bigger than 7
Fix ldo_get_enable() and ldo_set_enable() functions for LDOs with an
index > 7. Turns out there are actually two separate AS3722_LDO_CONTROL
registers AS3722_LDO_CONTROL0 and AS3722_LDO_CONTROL1. Actually make use
of both. While at it also actually use the enable parameter of the
ldo_set_enable() function which now truly allows disabling as opposed to
only enabling LDOs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:20 -07:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Keerthy
ebf48500df board: ti: am43: Fix DCDC3 voltage for epos-evm
A common voltage of 1.35V was being programmed for all am43 board
versions. EPOS-EVM Needs 1.20V for LPDDR2.

Fixes: fc69d47262 (“board: ti: AM43XX: Add ddr voltage rail configuration”)
Reported-by: James Doublesin <doublesin@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-06 13:35:40 -04:00
Patrick Delaunay
5d0c74e624 pmic: add stpmu1 support
This driver implements register read/write operations for STPMU1.

The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF
and 2 power switches. It is accessed via an I2C interface.
This device is used with STM32MP1 SoCs.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Jaehoon Chung
60599ea6cd power: regulator: s2mps11: add a regulator driver for s2mps11
exynos5422 has the s2mps11 PMIC.
s2mps11 pmic has the 10-BUCK and 38-LDO regulators.
Each IP and devices in exynos5422 can be controlled by each regulators.
This patch is support for s2mps11 regulator driver.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-24 16:07:19 +09:00
Peng Fan
d56f6ca288 power: pmic.h: include dm/ofnode.h
Include dm/ofnode.h.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:18:59 +01:00
Felix Brack
854dfbf99b power: pmic/regulator: Add basic support for TPS65910
Texas Instrument's TPS65910 PMIC contains 3 buck DC-DC converts, one
boost DC-DC converter and 8 LDOs. This patch implements driver model
support for the TPS65910 PMIC and its regulators making the get/set
API for regulator value/enable available.
This patch depends on the patch "am33xx: Add a function to query MPU
voltage in uV" to build correctly. For boards relying on the DT
include file tps65910.dtsi the v3 patch "power: extend prefix match
to regulator-name property" and an appropriate regulator naming is
also required.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Felix Brack
bf802f5d54 power: extend prefix match to regulator-name property
This patch extends pmic_bind_children prefix matching. In addition to
the node name the property regulator-name is used while trying to match
prefixes. This allows assigning different drivers to regulator nodes
named regulator@1 and regulator@10 for example.
I have discarded the idea of using other properties then regulator-name
as I do not see any benefit in using property compatible or even
regulator-compatible. Of course I am open to change this if there are
good reasons to do so.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Jean-Jacques Hiblot
5c970013a6 regulator: palmas: disable bypass when the LDO is enabled
Some LDOs have a bypass capability. Make sure that the bypass is disabled
when is the LDO is enabled (otherwise the voltage can't be changed).

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-01 11:58:01 +09:00
Simon Glass
e3f44f5c89 dm: power: Convert as3722 to driver model
Convert this PMIC driver to driver model and fix up other users. The
regulator and GPIO functions are now handled by separate drivers.

Update nyan-big to work correct. Three boards will need to be updated by
the maintainers: apalis-tk1, cei-tk1-som. Also the TODO in the code re
as3722_sd_set_voltage() needs to be completed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
c2012cb47c power: Add a GPIO driver for the as3722 PMIC
This pmic includes GPIOs which should have their own driver. Add
a driver to support these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
deea211aec power: Add a regulator driver for the as3722 PMIC
This pmic includes regulators which should have their own driver. Add
a driver to support these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Keerthy
06bdf6003b regulator: Change get_enable return type to integer from bool
Change get_enable return type to int so errors can be returned.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-19 19:13:59 +09:00
Wadim Egorov
ad98f882e8 power: regulator: rk8xx: Allow input current/charger shutdown configuration
The RK818 PMIC contains a charger. Add very basic charger functionality
to be able to regulate the USB input current and charger shutdown limits.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11 15:23:38 +02:00
Brock Zheng Techyauld Ltd
abf54bf978 Fixup bug in PMIC TPS65217 register address definition
The addresses of the registers in TI TPS65217 are not continuous.
     There is a gap between ENABLE(0x16) and DEFUVLO(0x18). No 0x17
     register available.

     Fixup the enum values by adding a 'reserved' placeholder to correct
     the addresses higher than 0x17.

     Series-to: Heiko Schocher <hs@denx.de>

Signed-off-by: Brock Zheng Techyauld Ltd <yzheng@techyauld.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-06-09 20:25:16 +09:00
Keerthy
cdad57a7c1 power: pmic: lp87565: Add the basic pmic support
Add support to bind the regulators/child nodes with the pmic.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-06-09 20:25:16 +09:00
Keerthy
fc69d47262 board: ti: AM43XX: Add ddr voltage rail configuration
Add ddr voltage rail (dcdc3) configuration. Set the dcdc3
DDR supply to 1.35V.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-09 20:25:16 +09:00
Simon Glass
7a869e6cd1 dm: pmic: Convert uclass to livetree
Update the pmic uclass and all pmics to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:12 -06:00
Keerthy
6183b29559 power: pmic: tps65218: Fix tps65218_voltage_update function
Currently while setting the vsel value for dcdc1 and dcdc2
the driver is wrongly masking the entire 8 bits in the process
clearing PFM (bit7) field as well. Hence describe an appropriate
mask for vsel field and modify only those bits in the vsel
mask.

Source: http://www.ti.com/lit/ds/symlink/tps65218.pdf

Signed-off-by: Keerthy <j-keerthy@ti.com>
Fixes: 86db550b38 ("power: Add support for the TPS65218 PMIC")
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-05-29 17:28:52 +09:00
Lokesh Vutla
59041a5084 arm: am33xx: Fix MPU opp selection
Update MPU frequencies and voltages as per the latest
DM[1] dated: OCT 2011 Revised APRIL 2016, Section 5.4.
Below is the consolidated data:

MPU values for PG 2.0 and later(Package ZCZ and ZCE):

 -------------------------------------------------------
|	|	  ZCZ		|	  ZCE		|
|-------------------------------------------------------|
|	| VDD[V]   | ARM [MHz]	| VDD[V]   | ARM [MHz]  |
|-------|----------|------------|----------|------------|
| NITRO |  1.325   |   1000     |   NA     |    NA      |
|-------|----------|------------|----------|------------|
| TURBO |   1.26   |    800	|   NA     |    NA      |
|-------|----------|------------|----------|------------|
|OPP120 |   1.20   |    720     |   NA     |    NA      |
|-------|----------|------------|----------|------------|
|OPP100 |   1.10   |    600     |   1.10   |    600     |
|-------|----------|------------|----------|------------|
| OPP50 |   0.95   |    300     |   0.95   |    300     |
 -------------------------------------------------------

There is no eFuse blown on PG1.0 Silicons due to which there is
no way to detect the maximum frequencies supported. So default
to OPP100 for which both frequency and voltages are common on both
the packages.

[1] http://www.ti.com/lit/ds/symlink/am3356.pdf

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-12 08:37:12 -04:00
Jacob Chen
453c5a927c power: rk808: rename to rk8xx
Since this driver can be used for rk8xx series pmic,
let's rename rk808 to rk8xx, to make it clear.

Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./`

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
2017-05-10 13:37:22 -06:00
Jacob Chen
d77af8a8c9 power: pmic: rk808: add RK818 support
The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld
devices.

For boards use rk818, the input current should be set in the early stage, before
ddr initialization.

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
2017-05-10 13:37:22 -06:00
Jacob Chen
1daa93c0b4 power: pmic: append rk818 regs to rk808
Both RK808 and RK818 chips are using a similar register map,
so we can reuse them.

I have also add reg prefix to exist registers, to keep them same style.

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 13:37:22 -06:00
Hou Zhiqiang
4394ad1227 pmic: pmic_mc34vr500: Add APIs to set/get SWx volt
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-18 09:28:57 -08:00
Hou Zhiqiang
762161b04a pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmic
This patch adds a simple pmic driver for the mc34vr500 pmic which
is used in conjunction with the fsl T1 and LS1 series SoC.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-18 09:28:53 -08:00
Breno Lima
894a4b4da7 power: pmic: Add Voltage configuration macro
Add pfuze3000 voltage configuration macro for SW1AB, SW3 and VLDO1/2 according
to tables 53, 57 and 62 on PF3000 datasheet.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
2016-12-16 10:21:29 +01:00
Keerthy
2f5d532f3b power: regulator: Introduce regulator_set_value_force function
In case we want to force a particular value on a regulator
irrespective of the min/max constraints for testing purposes
one can call regulator_set_value_force function.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-25 10:00:04 -07:00
Keerthy
ca1de0b545 power: pmic: lp873x: Add the base pmic support
Add support to bind the regulators/child nodes with the pmic.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:06 -06:00
Keerthy
33621d247e power: pmic: Palmas: Add the base pmic support
Add support to bind the regulators/child nodes with the pmic.
Also adds the pmic i2c based read/write funtions to access pmic
registers.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11 10:17:05 -06:00
Keerthy
34514b8b9c power: regulator: Add ctrl_reg and volt_reg fields for pmic
The ctrl reg contains bit fields to enable and disable regulators,
and volt_reg has the bit fields to configure the voltage values.
The registers are frequently accessed hence make them part
of dm_regulator_uclass_platdata structure.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:04 -06:00
Keerthy
477dfe2ffc power: regulator: Add support for gpio regulators
Add support for gpio regulators. As of now this driver caters
to gpio regulators with one gpio. Supports setting voltage values to gpio
regulators and retrieving the values.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:04 -06:00
Stefan Agner
c571d6828d power: pmic: add Ricoh RN5T567 PMIC support
Add device model enabled PMIC driver for Ricoh RN5T567 PMIC used
on Colibri iMX7.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-07 12:26:15 +02:00
Simon Glass
2e3f1ff63f dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()
This new function is more convenient for callers, and handles pre-relocation
situations automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27 14:15:07 -06:00
Heiko Schocher
640ff60af7 power, tps65217: add some defines
add the following defines, needed for the upcoming shc board
support:

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09 13:53:06 -04:00
Nikita Kiryanov
9bcfca123c pmic: tps65218: add useful functions and defines
Add the following functions:
tps65218_reg_read() for accessing redisters
tps65218_toggle_fseal() for toggling the fseal bit
tps65218_lock_fsea() for locking the fseal bit to 1

Add the following defines:
All status register bits

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:07 -05:00
Simon Glass
2a4febfd91 power: Add base support for the RK808 PMIC
This Rockchip PMIC provides features suitable for battery-powered
applications. It is commonly used with Rockchip SoCs.

Add a driver which provides register access. The regulator driver will use
this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:34 -07:00
Jagan Teki
425846ed8f power: pmic.h: Drop include <spi.h>
include/power/pmic.h never used any generic spi code
from include/spi.h, but this has been added in below commit.
"dm: pmic: add implementation of driver model pmic uclass"
(sha1: 4d9057e82b)

Adding functionalities in include/spi.h will trigger a build
issue as this been added used in include/power/pmic.h

Build issue on trats2 with adding BIT macro on spi.h:
----------------------------------------------------
  CC      lib/asm-offsets.s
In file included from include/power/pmic.h:15:0,
                 from include/power/max77686_pmic.h:11,
                 from include/configs/trats2.h:212,
                 from include/config.h:5,
                 from include/common.h:18,
                 from lib/asm-offsets.c:15:
include/spi.h: In function 'spi_w8r8':
include/spi.h:327:2: warning: implicit declaration of function 'BIT' [-Wimplicit-function-declaration]

Cc: Simon Glass <sjg@chromium.org>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-13 18:47:28 +05:30
Przemyslaw Marczak
c48cb7ebfb sandbox: add ADC unit tests
This commit adds unit tests for ADC uclass's methods using sandbox ADC.

Testing proper ADC binding:
- dm_test_adc_bind()                    - device binding
- dm_test_adc_wrong_channel_selection() - checking wrong channel selection

Testing ADC supply operations:
- dm_test_adc_supply():
  - Vdd/Vss values validating
  - Vdd regulator updated value validating
  - Vdd regulator's auto enable state validating

Testing ADC operations results:
- dm_test_adc_single_channel_conversion() - single channel start/data
- dm_test_adc_single_channel_shot()       - single channel shot
- dm_test_adc_multi_channel_conversion()  - multi channel start/data
- dm_test_adc_multi_channel_shot()        - multi channel single shot

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00
Przemyslaw Marczak
7c816e24a4 dm: regulator: add function device_get_supply_regulator()
Some devices are supplied by configurable regulator's output.
But there was no function for getting it. This commit adds
function, that allows for getting the supply device by it's phandle.

The returned regulator device can be used with regulator uclass's API.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00
Przemyslaw Marczak
35d460fbc8 dm: pmic: add s2mps11 PMIC I/O driver
This driver allows I/O operations on the Samsung S2MPS11 PMIC,
which provides lots of LDO/BUCK outputs.

To enable it, update defconfig with:
- CONFIG_PMIC_S2MPS11
and additional, if were not defined:
- CONFIG_CMD_PMIC
- CONFIG_ERRNO_STR

The binding info: doc/device-tree-bindings/pmic/s2mps11.txt

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00
Tom Rini
c9feb427ab Merge git://git.denx.de/u-boot-rockchip 2015-09-03 14:57:09 -04:00
Simon Glass
d2c88f7d52 power: Add support for ACT8846 PMIC
Add a driver for the ACT8846 PMIC. This supports several LDOs and BUCKs and
is connected to the I2C bus. This driver supports using a regulator driver
to access the regulators.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00
Adrian Alonso
48469c2d88 power: pmic: add pfuze3000 support
* Add pmic pfuze3000 support, implement power_pfuze3000_init to be
  used in power_init_board callback function.

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-09-02 15:31:33 +02:00
Peng Fan
1c1f6076b9 Add missing part of: "power: pmic: pfuze100 support driver model"
This part of mentioned commit, was missed by my mistake during the rebase.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>

Original commit message:
power: pmic: pfuze100 support driver model

1. Support driver model for pfuze100.
2. Introduce a new Kconfig entry DM_PMIC_PFUZE100 for pfuze100
3. This driver intends to support PF100, PF200 and PF3000, so add
   the device id into the udevice_id array.
4. Rename PMIC_NUM_OF_REGS macro to PFUZE100_NUM_OF_REGS.

Change-Id: I4fc88414f3c0285f9648e47ec7aed60addeccc4d
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-14 16:53:02 +02:00