Commit Graph

69642 Commits

Author SHA1 Message Date
Patrick Delaunay
77c077e171 arm: stm32mp: correct the ALIGN macro usage
Correct the ALIGN macro usage in mmu_set_region_dcache_behaviour
call: the address must use ALIGN_DOWN and size can use ALIGN macro.

With STM32_SYSRAM_BASE=0x2FFC0000 and MMU_SECTION_SIZE=0x100000 for
STM32MP15x the computed address was 30000000 instead of 2ff00000.

Fixes: 43fe9d2fda ("stm32mp1: mmu_set_region_dcache_behaviour")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:33:16 +01:00
Patrice Chotard
d5b0511391 ARM: dts: stm32: Fix typo in stm32h7-u-boot.dtsi
Fix typo "firsct"

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Patrice Chotard
183362947c ARM: dts: stm32: Fix timer initialization for stm32 MCU's board
Commit 4b2be78ab6 ("time: Fix get_ticks being non-monotonic")
puts in evidence that get_ticks is called before timer initialization.
Fix it by initializing timer before relocation.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Patrice Chotard
61c88ace4b ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
Device tree alignment with kernel v5.10-rc1.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Patrice Chotard
63185b0a32 ARM: dts: sync armv7-m.dtsi with kernel v5.10-rc1
Since kernel v4.8-rc1, commit 05b23ebc2bd9 ("ARM: dts: armv7-m: remove skeleton.dtsi include"),
skeleton.dtsi file is no more included.

This synchronization is needed to avoid to get 2 memory node
in DTB file if, in DTS file, memory node is declared with the correct
syntax as following:

	memory@90000000 {
 		device_type = "memory";
 		reg = <0x90000000 0x800000>;
 	};

Then in DTB, we will have the 2 memory nodes, which is incorrect and
cause misbehavior during DT parsing by U-boot:

	memory {
		device_type = "memory";
		reg = <0x00 0x00>;
	};

	memory@90000000 {
		device_type = "memory";
		reg = <0x90000000 0x800000>;
	};

Issue found when synchronizing MCU's STM32 DT from kernel v5.10-rc1.
When using fdtdec_setup_mem_size_base() or fdtdec_setup_memory_banksize()
API, first above memory node is found (with reg = <0x00 0x00>), so
gd->ram_size, gd->ram_base, gd->bd->bi_dram[bank].start and
gd->bd->bi_dram[bank].size are all set to 0 which avoid boards to boot.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Tom Rini
d361eafe82 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
- DWC2, DWC3 fixes
2020-11-22 11:00:11 -05:00
Tom Rini
6402887a9f Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh
- Assorted pinctrl updates
2020-11-22 10:59:49 -05:00
Jaehoon Chung
05dac23261 usb: gadget: dwc2_udc_otg: return zero when reset property is not present
If reset DT property is not present, -ENOENT is returned.
But it's not really error.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-22 13:18:20 +01:00
Siva Durga Prasad Paladugu
e7f9e1fca9 usb: dwc3: Handle case where setup_phy is not needed
If CONFIG_PHY is not enabled then the dwc3_setup_phy()
returns ENOTSUPP which can be still valid and intentional
so modify error check to handle this -ENOTSUPP.

The same error handling exists in drivers/usb/host/xhci-dwc3.c already
added by commit d648a50c0a ("dwc3: move phy operation to core.c").

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-22 13:18:20 +01:00
Patrick Delaunay
5739ef2bcb usb: dwc2: add "u-boot,force-vbus-detection" for stm32
On some board, the ID pin is not connected so the B session must be
overridden with "u-boot,force_b_session_valid" but the VBus sensing
must continue to be handle.

To managed it, this patch adds a new DT field
"u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-22 13:18:20 +01:00
Lad Prabhakar
46f3282b28 pinctrl: renesas: Drop unused members from struct sh_pfc_pinctrl
Drop unused members from struct sh_pfc_pinctrl.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22 12:49:22 +01:00
Biju Das
2a589b7c51 pinctrl: renesas: r8a7795: Optimize pinctrl image size for R8A774E1
This driver supports both RZ/G2H and R-Car H3 SoCs.
Optimize pinctrl image size for RZ/G2H, when support for R-Car H3
(R8A7795) is not enabled

Based on the similar patch on Linux.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22 12:49:22 +01:00
Biju Das
8b00761c06 pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1
This driver supports both RZ/G2N and R-Car M3-N SoCs.
Optimize pinctrl image size for RZ/G2N, when support for R-Car M3-N
(R8A77965) is not enabled.

Based on the simialr patch on Linux.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22 12:49:22 +01:00
Biju Das
fee13ae8cb pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1
This driver supports both RZ/G2M and R-Car M3-W/W+ SoCs.
Optimize pinctrl image size for RZ/G2M, when support for R-Car M3-W/W+
(R8A7796[01]) is not enabled.

Based on the similar patch on Linux.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-11-22 12:49:22 +01:00
Biju Das
975154bc2c pinctrl: renesas: r8a77951: Add R8A774E1 PFC support
Renesas RZ/G2H (r8a774e1) is pin compatible with R-Car H3 (r8a77951),
however it doesn't have several automotive specific peripherals. Add
a r8a77951 specific pin groups/functions along with common pin
groups/functions for supporting both r8a77951 and r8a774e1 SoC.

PFC changes are synced from mainline linux-5.9 commit
bbf5c979011a ("Linux 5.9").

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2020-11-22 12:49:22 +01:00
Biju Das
c5f3762588 pinctrl: renesas: r8a77965: Add R8A774B1 PFC support
Renesas RZ/G2N (r8a774b1) is pin compatible with R-Car M3-N (r8a77965),
however it doesn't have several automotive specific peripherals. Add
a r8a77965 specific pin groups/functions along with common pin
groups/functions for supporting both r8a77965 and r8a774b1 SoC.

PFC changes are synced from mainline linux-5.9 commit
bbf5c979011a ("Linux 5.9").

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2020-11-22 12:49:22 +01:00
Tom Rini
12e396303c Pull request for UEFI sub-system for efi-2021-01-rc3 (2)
The parameter check for UEFI service GetNextVariableName() is corrected.
 
 The dependencies of CONFIG_DFU_TFTP are simplified.
 
 The set of supported hash algorithms reported by the EFI_TCG2_PROTOCOL is
 corrected.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+5DQgACgkQxIHbvCwF
 GsTbxQ/7BGaaUlowZNMhiD+iPmW+ZlRJQYv+o9yuiV0EnFVTxvFc6lvYxqmwVjQZ
 3Z7bVJo4OvM9QHD6umIFUr/1GghfUbjvS45v0tKYqDBUO0plcO+PF5yr9G10KMhh
 ybDexe9x2hvC8UqF1q76xjqvehIq9zmDrSE44sRlJ7KKnd4plIssRQLQUZrqdxhn
 HR6VdIi1Ooo0hgCAD2z/6yyLJO2gvwNMyOQLf3p3EEuGks4BYB6fWhexBGs0+lTh
 kY/iu2N8vlKwGa5L2b/zNBtpCRum1b05KwVEjwX6lgMWruVmzKvs2PNbPkkNhwc7
 66+YhjRxO2i61uroNHgu/EmJ6gZzCS2+3+tN2uXz+w2Wx+DZ90XLfqpklH1RXQiD
 BhFVjPzbYp5zSsaLCURx368CEktBdqyB2+pNTQ0WHvMXS0UAzGIbUglKvXrVlUsw
 uz17zvqBCXOxkag6vzu6ePWXJ3IEcUDx7N6jT4xaBr8vh7aTzYLZDzq6KP9bjgrw
 6GkDY1v6Kla7hM7nG/VPA+Cu1a7q7kHUjAK4kCQCJyH9bbO6+YojaRyFHxOxDEpf
 WIEAFr4UfJjoq+/dcsPKosFl+m2xebCd1xvJt+OblNAemBOER4sApg8g4W2/TQuH
 PaXuCjbrH0hNBQTkUQeMwkWjN6EHcBcjfbeXSJ9vVlgTp8+zDrA=
 =6U7u
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc3-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc3 (2)

The parameter check for UEFI service GetNextVariableName() is corrected.

The dependencies of CONFIG_DFU_TFTP are simplified.

The set of supported hash algorithms reported by the EFI_TCG2_PROTOCOL is
corrected.
2020-11-21 08:04:39 -05:00
Heinrich Schuchardt
7e5875a856 efi_loader: parameter check in GetNextVariableName()
If GetNextVariableName() is called with a non-existing combination of
VariableName and VendorGuid, return EFI_INVALID_PARAMETER.

If GetNextVariableName() is called with a string that is not zero
terminated, return EFI_INVALID_PARAMETER.

Reformat a line over 80 characters.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-21 07:26:16 +01:00
Ilias Apalodimas
9aeb380277 efi_loader: tcg2 protocol updates
On pull reuqest
https://lists.denx.de/pipermail/u-boot/2020-November/432735.html
V4 of the patchset was sent instead of the v5.
This is the v4->v5 missing diff

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-21 07:26:16 +01:00
AKASHI Takahiro
c32479d1d2 dfu: simplify the dependencies of DFU_TFTP
Since CONFIG_UPDATE_COMMON always selects CONFIG_DFU_WRITE_ALT, we can
drop the latter from dependencies of CONFIG_DFU_TFTP.

Fixes: 3149e524fc ("common: update: add a generic interface for FIT
       image")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-21 07:26:16 +01:00
Tom Rini
5b8991c667 Xilinx changes for v2021.01-rc3
Microblaze:
 - Enable GC
 - Get rid of xparameters.h and switch to DT for CFI
 - Fix config file
 
 tpm:
 - Fix TPM code
 
 zynqmp:
 - Enable TPM by default
 - Remove unused macros
 
 fru:
 - Several fixes especially use limit for recording
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX7eTAAAKCRDKSWXLKUoM
 IQ/nAJ41sZwLDKsq2r6OhCYEv6Y9za0bUQCfTOhMt4+LPv4h4Og8pAlAg4Pwb7w=
 =URLE
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.01-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.01-rc3

Microblaze:
- Enable GC
- Get rid of xparameters.h and switch to DT for CFI
- Fix config file

tpm:
- Fix TPM code

zynqmp:
- Enable TPM by default
- Remove unused macros

fru:
- Several fixes especially use limit for recording
2020-11-20 09:00:20 -05:00
Michal Simek
cd40b82655 fru: common: Record pcie/uuid fields in custom board area
Add additional fields. They will be just recorded and filled but not shown.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek
b8771d0b1d fru: ops: Do not let parser to write data to not allocated space
If customs fields in board area are used it will likely go over allocated
space in struct fru_board_data. That's why calculate limit of this
structure to make sure that different data is not rewritten by accident.
When limit is reached stop to record fields.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek
5fb093f471 fru: common: Switch capture variable with the rest
capture variable is bool which is just one byte and it is just causing
unaligned accesses. Better to have it as last entry in the structure.

It also simplify offset calculation for initial header copy.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek
072dbc7ac5 arm64: zynqmp: Enable TPM for xilinx platforms
TPMs are becoming popular that's why enable drivers and command for it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek
6004db972d arm64: zynqmp: Get rid of unused macros
There is no reason to have these macros. But record offsets of missing
register in the structure for future use.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek
d99f163792 tpm: spi: Cleanup source code
There is no need for GD to be used and priv variable is unused.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-20 10:42:54 +01:00
Michal Simek
631a241e48 microblaze: Detect NOR flash based on DT
Remove fixed configuration and detect flash based on DT.

Also increase amount of flash sectors to 2048 because on kc705 flash has
1027 sectors.

Bank # 1: CFI conformant flash (16 x 16)  Size: 128 MB in 1027 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962
  Erase timeout: 4096 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 1024 bytes

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek
09996b4d84 microblaze: Unify of setting for SPL_NOR/XIP support
XIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with
using SYS_FLASH_BASE are wrong because it is not aligned with DM.
That's why change these macro and align them with TEXT_BASE macro.
Information should be find at run time based on DT but implementation is
not done yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
a3c43fb01a microblaze: Remove CONFIG_SYS_FDT_SIZE
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
6c5828dc4b microblaze: Get rid of xparameters.h
There is no need to use this file anymore. Include it in main config file
and simplify logic based on it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
7556fa09e0 microblaze: Simplify cache handling
Enable caches by default. For now just simplify config file but it should
be read from DT or PVRs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
91218f4c24 microblaze: Clean config file from ifdef mess
A lot of configs has been moved to Kconfig and it ends up in ifdef mess
with no bodies. That's why remove all of them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek
9c2aa7e707 microblaze: Enable GCC garbage collector for full U-Boot
GCC's garbage collector works for Microblaze for quite a long time but none
has enabled it.
The same change has be done for example by commit fac4790491 ("arc:
Eliminate unused code and data with GCC's garbage collector").

Before:
   text	   data	    bss	    dec	    hex	filename
 588760	  33592	  39192	 661544	  a1828	u-boot

After:
   text	   data	    bss	    dec	    hex	filename
 504504	  32164	  38608	 575276	  8c72c	u-boot

Which saves almost 15% of memory footprint.

Also group symbols/functions to proper section.

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Tom Rini
b80680633d Merge branch '2020-11-18-assorted-fixes'
- Assorted SquashFS fixes and cleanups
- Fixes for various Coverity issues
- Various fixups to other platforms / code
2020-11-19 10:23:50 -05:00
Richard Genoud
dd4866b437 fs/squashfs: implement exists() function
This permits to find a file and use the distro_bootcmd

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
21b1b3bad5 fs/squashfs: sqfs_read: remove buggy offset functionality
offset is the offset in the file read, not the offset in the destination
buffer.
If the offset is not null, this will lead to a memory corruption.
So, for now, we are returning an error if the offset is used.

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
cbd5e40ede fs/squashfs: sqfs_read: don't write beyond buffer size
The length of the buffer wasn't taken into account when writing to the
given buffer.

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
6d25bd3e9c fs/squashfs: sqfs_probe: use sqfs_decompressor_init() return value
sqfs_decompressor_init() returns a value, so it's better to use it than
to force the return value to EINVAL (it could be ENOMEM)

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
56cf1ceee3 fs/squashfs: sqfs_probe: reset cur_dev/cur_part_info to NULL on error
Resetting the context on error will prevent some checks like:
if (!ctx.cur_dev)
To pass when the probe method has failed

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
ccd4c08a45 fs/squashfs: sqfs_probe: fix possible memory leak on error
If SquashFS magic number is invalid, there's a memory leak.

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
571b67ee1d fs/squashfs: sqfs_read: fix memory leak on finfo.blk_sizes
finfo.blk_sizes may not be freed in case of error in the for loop
Setting it to null and freeing it at the end makes prevents that from
happening.

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
33686804d2 fs/squashfs: sqfs_get_abs_path: fix possible memory leak on error
if  sqfs_tokenize(rel_tokens, rc, rel); fails, the function exits
without freeing the array base_tokens.

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
53db0e24a8 fs/squashfs: sqfs_get_abs_path: fix error check
the return value of sqfs_tokenize(rel_tokens, rc, rel); wasn't checked.
(but "ret" value was !)
This is obviouly a typo.

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
c9b8e86f8b fs/squashfs: sqfs_frag_lookup: simplify error handling
For consistency with other functions.

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
555459e793 fs/squashfs: sqfs_read: fix another memory leak
data_buffer was allocated in a loop and freed only once.

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
7ce9745cbe fs/squashfs: sqfs_read: fix memory leak
sqfs_closedir() should be called to free memory allocated by
sqfs_opendir()

Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
b34949fe9b fs/squashfs: sqfs_read: remove useless sqfs_closedir()
as sqfs_opendir failed, there's no need to call sqfs_closedir

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
d1d8d75f69 fs/squashfs: sqfs_read: fix dangling pointer dirs->entry
dirs->entry shouldn't be left dangling as it could be freed twice.

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00
Richard Genoud
35475f83a1 fs/squashfs: sqfs_size: remove useless sqfs_closedir()
as sqfs_opendir failed, there's no need to call sqfs_closedir

Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19 09:45:49 -05:00