wdenk
8ed9604613
* Patches by Richard Woodruff, 01 Oct 2004:
...
add support for the TI OMAP2420 processor and its H4 reference
board
* Patch by Christian Pellegrin, 24 Sep 2004:
Added support for NE2000 compatible (DP8390, DP83902) NICs.
2005-01-09 23:16:25 +00:00
wdenk
ff36fd8591
* Patch by Leif Lindholm, 23 Sep 2004:
...
add support for the AMD db1550 board
* Patch by Travis Sawyer, 15 Sep 2004:
Add CONFIG_SERIAL_MULTI support for ppc4xx,
update README.serial_multi
2005-01-09 22:28:56 +00:00
wdenk
6310eb9da7
Patches by David Snowdon, 07 Sep 2004:
...
- add u-boot.hex target in the top level Makefile
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
- use -mtune=xscale and -march=armv5 options for PXA
2005-01-09 21:28:15 +00:00
wdenk
a562e1bd9d
Patch by Florian Schlote, 08 Sep 2004:
...
Add support for SenTec-COBRA5272-board (Coldfire).
2005-01-09 18:21:42 +00:00
wdenk
9dd611b8c1
* Patch by Kurt Stremerch, 03 Sep 2004:
...
Add Xilinx Spartan2E family FPGA support
* Patch by Jeff Angielski, 02 Sep 2004:
Add Added support for H2 revision of the EP8260 board.
Fixed formatting for some of the EP8260 related source files.
2005-01-09 17:19:34 +00:00
wdenk
a1191902ca
* Patch by Jon Loeliger, 02 Sep 2004:
...
Reset monitor size back to 256 so environment can be written
to flash on MPC85xx ADS and CDS releases.
* Patch by Paolo Broggini, 02 Sep 2004:
Make BSS clearing on ARM systems more robust
* Patch by Yue Hu and Joe, 01 Sep 2004:
- add PCI support for ixp425;
- add EEPRO100 suppor tfor ixdp425 board.
* Fix problem with protected sector detection in driver/cfi_flash.c
2005-01-09 17:12:27 +00:00
wdenk
e2ffd59b4d
* Code cleanup, mostly for GCC-3.3.x
...
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
wdenk
400ab719c6
Fix problems with CMC_PU2 flash driver.
2004-12-20 11:18:07 +00:00
wdenk
08f272787a
* Fix problems with CMC_PU2 flash driver.
...
* Adjust INKA 4x0 default settings
2004-12-19 21:39:27 +00:00
wdenk
f7d1572bf5
Add support for UC100 board
2004-12-18 22:35:43 +00:00
stroese
8e6b47a89b
One more code cleanup.
2004-12-17 09:13:49 +00:00
wdenk
efe2a4d5cf
Code cleanup.
2004-12-16 21:44:03 +00:00
stroese
bea8e84b52
PCI405 board update
2004-12-16 19:10:22 +00:00
stroese
917b8cc41c
AR405 board update
2004-12-16 19:00:32 +00:00
stroese
0621f6f9d3
esd common update
2004-12-16 18:43:13 +00:00
stroese
cd5396fa12
VOH405 board update
2004-12-16 18:41:27 +00:00
stroese
4510a7b736
PMC405 board update
2004-12-16 18:40:02 +00:00
stroese
12537cc5a9
PLU405 board update
2004-12-16 18:39:03 +00:00
stroese
c2642d14c9
PCI405 board update
2004-12-16 18:38:22 +00:00
stroese
25215ee2b0
OCRTC board update
2004-12-16 18:37:41 +00:00
stroese
31193c2cca
HUB405 board update
2004-12-16 18:37:08 +00:00
stroese
ab379df353
DU405 board update
2004-12-16 18:36:28 +00:00
stroese
f2dfe44fd6
DP405 board update
2004-12-16 18:35:58 +00:00
stroese
20aacbf018
CPCIISER4 board update
2004-12-16 18:35:14 +00:00
stroese
7acd6c2168
CPCI440 board update
2004-12-16 18:34:28 +00:00
stroese
c491b442cc
CANBT board update
2004-12-16 18:33:45 +00:00
stroese
86cf82e07f
ASH405 board update
2004-12-16 18:33:12 +00:00
stroese
8d3efe4e9a
AR405 board update
2004-12-16 18:30:36 +00:00
stroese
e399e4c670
ADCIOP board update
2004-12-16 18:27:51 +00:00
stroese
87663b1cbc
CPCI405 board update
2004-12-16 18:27:05 +00:00
stroese
6cfb1f0da6
WUH405 board support added
2004-12-16 18:25:40 +00:00
stroese
809ac5e7b0
VOM405 board support added
2004-12-16 18:24:54 +00:00
stroese
8d8f894b51
TASREG board support added
2004-12-16 18:24:06 +00:00
stroese
1f54ce6df8
HH405 board support added
2004-12-16 18:23:14 +00:00
stroese
771e05be07
CPCI750 board support added
2004-12-16 18:21:17 +00:00
stroese
1bc0f14143
APC405 board support added
2004-12-16 18:20:14 +00:00
stroese
aee2fa27d9
G2000 board support added
2004-12-16 18:17:50 +00:00
wdenk
138ff60c1e
Add support for INKA4X0 board
2004-12-16 15:52:40 +00:00
wdenk
45ea3fca4a
Cleanup for CMC_PU2 board
2004-12-14 23:28:24 +00:00
wdenk
689aec1b05
Patch by Steven Scholz, 12 Dec 2004:
...
Fix typo in AT91 memory setup.
2004-12-13 00:18:44 +00:00
wdenk
7e6bf358d8
Patch by Martin Krause, 27 Oct 2004:
...
- add support for "STK52xx" board (including PS/2 multiplexer)
- add hardware detection for TQM5200
2004-12-12 22:06:17 +00:00
wdenk
25d6712a81
* Clean up CMC PU2 flash driver
...
* Update MAINTAINERS file
* Fix bug in MPC823 LCD driver
2004-12-10 11:40:40 +00:00
wdenk
ed54e62125
* Fix udelay() on AT91RM9200 for delays < 1 ms.
...
* Enable long help on CMC PU2 board;
fix reset issue;
increase CPU speed from 179 to 207 MHz.
2004-11-24 23:35:19 +00:00
wdenk
9d5028c2f7
* Update for AT91RM9200DK and CMC_PU2 boards:
...
- Enable booting directly from flash
- fix CMC_PU2 flash driver
* Fix mkimage usage message
2004-11-21 00:06:33 +00:00
wdenk
983fda8391
Patch by TsiChung Liew, 23 Sep 2004:
...
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
2004-10-28 00:09:35 +00:00
wdenk
e3c9b9f928
* Fix configuration for ERIC board (needs more room)
...
* Adjust MIPS compiler options at run-time depending on tools version
("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
"-mcpu=4kc" for old tools)
2004-10-24 23:54:40 +00:00
wdenk
e86e5a0748
Code cleanup for GCC-3.3.x compilers
2004-10-17 21:12:06 +00:00
wdenk
8b74bf31fe
Cleanup
2004-10-11 23:10:30 +00:00
wdenk
4cfaf55e5c
* Enable NAND flash support for NC650 board.
...
* Patch by Thomas Lange 07 Oct 2004:
Updated README for DBAu1x00 boards to match current status
2004-10-11 23:03:10 +00:00
wdenk
d407bf52b5
* Patch by Philippe Robin, 28 Sept 2004:
...
Fix Flash support for Versatile.
* Patch by Roger Blofeld, 16 Sep 2004:
Fix timeout for DHCP command retry
2004-10-11 22:51:13 +00:00