Commit Graph

27 Commits

Author SHA1 Message Date
Wolfgang Denk
8ed44d91c8 Cleanup: fix "MHz" spelling
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:25:39 +02:00
Haiying Wang
dfb49108e4 Pass dimm parameters to populate populate controller options
Because some dimm parameters like n_ranks needs to be used with the board
frequency to choose the board parameters like clk_adjust etc. in the
board_specific_paramesters table of the board ddr file, we need to pass
the dimm parameters to the board file.

* move ddr dimm parameters header file from /cpu to /include directory.
* add ddr dimm parameters to populate board specific options.
* Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Ben Warren
10efa024b8 Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
Affected boards:
	db64360
	db64460
	katmai
	taihu
	taishan
	yucca
	cpc45
	cpu87
	eXalion
	elppc
	debris
	kvme080
	mpc8315erdb
	integratorap
	ixdp425
	oxc
	pm826
	pm828
	pm854
	pm856
	ppmc7xx
	sc3
	sc520_spunk
	sorcery
	tqm8272
	tqm85xx
	utx8245

Removed initialization of the driver from net/eth.c
Also, wrapped contents of pci_eth_init() by CONFIG_PCI.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:19 -07:00
Kumar Gala
6bfa8f723c FSL DDR: Convert PM856 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:51 -05:00
Wolfgang Denk
c8a3b109f0 Cleanup out-or-tree building for some boards (.depend)
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-02 23:49:18 +02:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Kumar Gala
859a86a25c 85xx/86xx: Move to dynamic mgmt of LAWs
With the new LAW interface (set_next_law) we can move to letting the
system allocate which LAWs are used for what purpose.  This makes life
a bit easier going forward with the new DDR code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-11 01:52:23 -05:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Jason Wessel
3d36be0300 Remove all the search paths from the .lds files.
The cross compiler is responsible for providing the correct libraries
and the logic to find the linking libraries.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-17 23:57:32 -07:00
Kumar Gala
f69766e4b5 85xx: Add the concept of CFG_CCSRBAR_PHYS
When we go to 36-bit physical addresses we need to keep the concept of
the physical CCSRBAR address seperate from the virtual one.

For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Kumar Gala
818218bac6 85xx: Convert PM854/PM856 to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17 02:10:04 -06:00
Kumar Gala
c8c41d4a80 85xx: Use proper defines for PCI addresses
We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
be used for configuring the PCI ATMU.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:56 -06:00
Kumar Gala
45f2166ac0 85xx: convert PM854/PM856 over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:55 -06:00
Wolfgang Denk
64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
Kumar Gala
2146cf5682 Reworked FSL Book-E TLB macros to be more readable
The old macros made it difficult to know what WIMGE and perm bits
were set for a TLB entry.  Actually use the bit masks for these items
since they are only a single bit.

Also moved the macros into mmu.h out of e500.h since they aren't specific
to e500.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:03 -06:00
Kumar Gala
04db400892 Stop using immap_t on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_*_ADDR as the base of the registers
instead of getting it via &immap.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Kumar Gala
f59b55a5b8 Stop using immap_t for guts offset on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
instead of getting it via &immap->im_gur.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:19 -06:00
Wolfgang Denk
7e2a24dca9 Merge with http://opensource.freescale.com/pub/scm/u-boot-85xx.git#for_wd 2006-10-11 23:54:37 +02:00
Matthew McClintock
7376eb87aa * Fix a bunch of compiler warnings for gcc 4.0
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-10-11 15:13:01 -05:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Wolfgang Denk
7481266e4e 2005-12-12 16:06:05 +01:00
Wolfgang Denk
807d5d7319 Fix problems with ld version 2.16 (dot outside sections problem)
Pointed out by Gerhard Jaeger, 31 Aug 2005;
cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
2005-08-31 12:28:00 +02:00
Wolfgang Denk
452e8e72ad Fix build problems for PM856 Board 2005-08-08 00:47:14 +02:00
Wolfgang Denk
b20d00328c Add support for MicroSys PM856 board
Patch by Josef Wagner, 03 Aug 2005
2005-08-05 12:19:30 +02:00