Commit Graph

39947 Commits

Author SHA1 Message Date
Hou Zhiqiang
81049ba8f4 ARMv8/sec-firmware: fix a compile error
When enabled sec firmware framework, but lack of definition of
the marco SEC_FIRMWARE_FIT_IMAGE, SEC_FIRMEWARE_FIT_CNF_NAME
and SEC_FIRMWARE_TARGET_EL, there will be some build errors,
so give a default definition.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2016-10-06 20:57:36 -04:00
Siarhei Siamashka
22a402f00c ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.S
The SPL and U-Boot proper may use different initial stack
locations, which are configured via CONFIG_SPL_STACK and
CONFIG_SYS_INIT_SP_ADDR defines. The lowlevel_init.S
code needs to handle this in the same way as crt0.S

Without this fix, setting the U-Boot stack location to some
place, which is not safely accessible by the SPL (such as
the DRAM), causes a very early SPL deadlock.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-06 20:57:36 -04:00
Andreas Fenkart
24307d6337 Suspected Spam: Do not open attachements![PATCH 4/6] tools/env: flash_write_buf: enforce offset to be start of environment
This allows to take advantage of the environment being block aligned.
This is not a new constraint. Writes always start at the begin of the
environment, since the header with CRC/length as there.
Every environment modification requires updating the header

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-10-06 20:57:35 -04:00
Andreas Fenkart
ff95e579cf tools/env: lookup dev_type directly from flash_read_buf/flash_write_buf
flash_write_buf already looks up size/offset/#sector from struct
envdev_s. It can look up mtd_type as well. Same applies to
flash_read_buf. Makes the interface simpler

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-10-06 20:57:35 -04:00
Andreas Fenkart
c6012bbce6 tools/env: pass bad block offset by value
the offset is not modified by linux ioctl call
see mtd_ioctl{drivers/mtd/mtdchar.c}
Makes the interface less ambiguous, since the caller can
now exclude a modification of blockstart

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-10-06 20:57:34 -04:00
Andreas Fenkart
e2c9351d5a tools/env: factor out environment_end function
instead of adhoc computation of the environment end,
use a function with a proper name

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-10-06 20:57:34 -04:00
Clemens Gruber
d025021e98 gunzip: cache-align write buffer memory
When using gzwrite to eMMC on an i.MX6Q board, the following warning
occurs repeatedly:
CACHE: Misaligned operation at range [4fd63318, 4fe63318]

This patch cache-aligns the memory allocation for the gzwrite writebuf,
therefore avoiding the misaligned dcache flush and the warning from
check_cache_range.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2016-10-06 20:57:33 -04:00
Simon Glass
4dc34be430 README: Fix CONFIG_SYS_NAND_MAX_DEVICE typo
This should be CONFIG_SYS_MAX_NAND_DEVICE. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Scott Wood <oss@buserror.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:54 -04:00
Simon Glass
b43957baf7 README: Drop CONFIG_MPC8349ADS
This option is not used now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:51 -04:00
Simon Glass
89e5440ef7 README: Drop README.imx31
The only content of this file is CONFIG options which are no-longer present
in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:49 -04:00
Simon Glass
b44b632a68 atmel: Drop README.at91-soc
This issue covered by this doc appears to be fixed, so let's remove the
README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Acked-by: Andreas Bießmann <andreas@biessmann.org>
2016-10-06 20:40:46 -04:00
Simon Glass
4b7283a3d6 README: Drop CONFIG_SYS_USE_OSCCLK
This is not used in U-Boot so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:44 -04:00
Simon Glass
acd51f9d91 README: Drop CONFIG_SYS_INIT_DATA_SIZE
This appears to be calculated automatically now. Drop the old reference.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:42 -04:00
Simon Glass
945a18e625 README: i2c: Drop unused i2c CONFIG options
CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_MULTI_NOPROBES are not used
in U-Boot, so drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:40 -04:00
Simon Glass
b7381bb68f README: sh: Drop CONFIG_SYS_I2C_SH_BASE5
This is not used in U-Boot. Drop both the BASE and the SIZE config.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:38 -04:00
Simon Glass
5371d34c63 README: Drop CONFIG_SYS_USB_BRG_CLK
This is not used in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:35 -04:00
Simon Glass
d501d450f5 README: Drop CONFIG_LAN91C96_BASE
This is not used in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:33 -04:00
Simon Glass
dd9c6e4826 README: Drop CONFIG_OF_BOOT_CPU
This is not used in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:31 -04:00
Simon Glass
1fb33434e3 README: Drop unused CONFIG_SYS_LS_MC_FW_... options
Drop a few that are not used in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:29 -04:00
Simon Glass
b2482dffa0 README: Drop unused JFFS2 options
There appear to be neither implemented nor used. Drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:26 -04:00
Simon Glass
9dd05fb8c8 README: Correct CONFIG_ENV_OFFSET_RENDUND typo
Change this to CONFIG_ENV_OFFSET_REDUND.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:24 -04:00
Simon Glass
61a4c21436 README: Drop CONFIG_COGENT and related options
These are no-longer present in U-Boot. Drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:20 -04:00
Simon Glass
8477763462 README: Drop old Intel Monahans comment
This is no longer in the U-Boot source code, so drop this note from the
README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-06 20:40:03 -04:00
Simon Glass
d32b2d1c61 spl: Make spl_boot_list a local variable
There is no need for this to be in the BSS region. By moving it we can delay
use of BSS in SPL. This is useful for machines where the BSS region is not
in writeable space. On 64-bit x86, SPL runs from SPI flash and it is easier
to eliminate BSS use than link SPL to run with BSS at a particular
cache-as-RAM (CAR) address.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:55 -04:00
Simon Glass
f4d7d8596f spl: Update spl_load_simple_fit() to take an spl_image param
Upda the SPL FIT code to use the spl_image parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:54 -04:00
Simon Glass
710e9ca579 spl: Update fat functions to take an spl_image parameter
Update the fat loader to avoid using the spl_image global variable.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:53 -04:00
Simon Glass
b4a6c2aae6 spl: Update ext functions to take an spl_image parameter
Update the ext loader to avoid using the spl_image global variable.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:53 -04:00
Simon Glass
2a2ee2ac35 spl: Pass spl_image as a parameter to load_image() methods
Rather than having a global variable, pass the spl_image as a parameter.
This avoids BSS use, and makes it clearer what the function is actually
doing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:52 -04:00
Simon Glass
97d9df0a91 spl: Convert spl_board_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code. Update existing users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:50 -04:00
Simon Glass
7ec0389354 spl: Convert spl_net_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code. We need two variants - one for BOOT_DEVICE_CPGMAC and one for
BOOT_DEVICE_USBETH.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:18 -04:00
Simon Glass
ea022a3775 spi: Move freescale-specific code into a private header
At present there are two SPI functions only used by freescale which are
defined in the spi_flash.h header. One function name matches an existing
generic SPL function.

Move these into a private header to avoid confusion.

Arcturus looks like it does not actually support SPI, so drop the SPI code
from that board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:35 -04:00
Simon Glass
139db7af4e spl: Convert spl_spi_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code. Also set up the sunxi function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:34 -04:00
Simon Glass
0a9b73a13e spl: spi: Move the generic SPI loader into common/spl
All the other SPL loaders are in this directory, so move the SPI one in
there too.

There are two board-specific SPI loaders (fsl and sunxi). These remain in
the drivers/mtd/spi directory, since they do not contain generic code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:33 -04:00
Simon Glass
7557147927 spl: Convert spl_sata_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:33 -04:00
Simon Glass
56df46351a spl: Convert spl_usb_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:29 -04:00
Simon Glass
dd6bf9025c spl: Convert spl_ymodem_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:59 -04:00
Simon Glass
548b3ee73c spl: Convert spl_nor_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:59 -04:00
Simon Glass
afa6e6c488 spl: Convert spl_onenand_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:58 -04:00
Simon Glass
d5c2b11ce4 spl: Convert spl_nand_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:57 -04:00
Simon Glass
7d7dd821b0 spl: Convert spl_ubi_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:56 -04:00
Simon Glass
0fed9c7ed6 spl: Convert spl_mmc_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:56 -04:00
Simon Glass
98136b2f26 spl: Convert spl_ram_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Include updating the DFU case]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:35 -04:00
Simon Glass
a0a8029058 spl: Add a way to declare an SPL image loader
Add a linker list macro which can be used to declare an SPL image loader.
Update spl_load_image() to search available loaders for the correct one.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:53:36 -04:00
Simon Glass
ecdfd69a4b spl: Convert boot_device into a struct
At present some spl_xxx_load_image() functions take a parameter and some
don't. Of those that do, most take an integer but one takes a string.

Convert this parameter into a struct so that we can pass all functions the
same thing. This will allow us to use a common function signature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:53:36 -04:00
Simon Glass
a807ab3303 spl: Kconfig: Move SPL_DISPLAY_PRINT to Kconfig
Move this option to Kconfig and tidy up existing uses. Also add a function
comment to the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:48:21 -04:00
Simon Glass
f59961e343 spl: Add function comments to spl_start_uboot()
Add some comments to describe this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:48:19 -04:00
Simon Glass
ca12e65caa spl: Add a parameter to jump_to_image_linux()
Instead of using the global spl_image variable, pass the required struct in
as an argument.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:48:19 -04:00
Simon Glass
71316c1d8c spl: Add a parameter to spl_parse_image_header()
Instead of using the global spl_image variable, pass the required struct in
as an argument.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:48:17 -04:00
Simon Glass
d95ceb97c0 spl: Add a parameter to spl_set_header_raw_uboot()
Rather than act on the global variable, pass the required struct in as a
parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:48:15 -04:00
Simon Glass
e50d76cc3c spl: Move spl_board_load_image() into a generic header
At present this is only used on ARM and sandbox, but it is just as
applicable to other architectures. Move the function prototype into the
generic SPL header.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 14:48:14 -04:00