Commit Graph

355 Commits

Author SHA1 Message Date
Stephen Warren
a2ec560647 test/py: Quote consistency
When converting test/py from " to ', I missed a few places (or added a
few inconsistencies later). Fix these.

Note that only quotes in code are converted; double-quotes in comments
and HTML are left as-is, since English and HTML use " not '.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
e8debf394f test/py: use " for docstrings
Python's coding style docs indicate to use " not ' for docstrings.

test/py has other violations of the coding style docs, since the docs
specify a stranger style than I would expect, but nobody has complained
about those yet:-)

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
56382a81f3 test/py: make net test aware of USB and PCI enumeration
The existing net test executes a list of commands supplied by boardenv
variable env__net_pre_commands. The idea was that boardenv would know
whether the Ethernet device was attached to USB, PCI, ... and hence was
the best place to put any commands required to probe the device.

However, this approach doesn't scale well when attempting to use a single
boardenv across multiple branches of U-Boot, some of which require "pci
enum" to enumerate PCI and others of which don't, or don't /yet/ simply
because various upstream changes haven't been merged down.

This patch updates the test to require that the boardenv state which HW
features are required for Ethernet to work, and lets the test itself map
that knowledge to the set of commands to execute. Since this mapping is
part of the test script, which is part of the U-Boot code/branch, this
approach is more scalable. It also feels cleaner, since again boardenv
is only providing data, rather than test logic.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
be1df82656 test/py: dfu: error out if USB device already exists
The DFU test requests U-Boot configure its USB controller in device mode,
then waits for the host machine to enumerate the USB device and create a
device node for it. However, this wait can be fooled if the USB device
node already exists before the test starts, e.g. if some previous software
stack already configured the USB controller into device mode and never
de-configured it. This "previous software stack" could even be another
test/py test, if U-Boot's own USB teardown does not operate correctly. If
this happens, dfu-util may be run before U-Boot is ready to serve DFU
commands, which may cause false test failures.

Enhance the dfu test to fail if the device node exists before it is
expected to.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
e787a58fe2 test/py: make crash detection more robust
test/py contains logic to detect the target crashing and rebooting by
searching the console output for a U-Boot signon message, which will
presumably be emitted when the system boots after the crash/reset.

Currently, this logic only searches for the exact signon message that
was printed by the U-Boot version under test, upon the assumption that
binary is written into flash, and hence will be the version booted after
any reset. However, this is not a valid assumption; some test setups
download the U-Boot-under-test into RAM and boot it from there, and in
such a scenario an arbitrary U-Boot version may be located in flash and
hence run after any reset.

Fix the reset detection logic to match any U-Boot signon message. This
prevents false negatives.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
e5bb279f82 test/py: add a networking test
This tests:
- dhcp (if indicated by boardenv file).
- Static IP network setup (if provided by boardenv file).
- Ping.
- TFTP get.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
0526610334 test/py: move find_ram_base() into u_boot_utils
find_ram_base() is a shared utility function, not a core part of the
U-Boot console interaction.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
f5d196d03e test/py: add DFU test
Add a test of DFU functionality to the Python test suite. The test
starts DFU in U-Boot, waits for USB device enumeration on the host,
executes dfu-util multiple times to test various transfer sizes, many
of which trigger USB driver edge cases, and finally aborts the DFU
command in U-Boot.

This test mirrors the functionality previously available via the shell
scripts in test/dfu, and hence those are removed too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
d054f4c2cb test/py: ums: add filesystem-based testing
Enhance the UMS test to optionally mount a partition and read/write a file
to it, validating that the content written and read back are identical.

This enhancement is backwards-compatible; old boardenv contents that don't
define the new configuration data will cause the test code to perform as
before.

test/ums/ is deleted since the Python test now performs the same testing
that it did.

The code is also re-written to make use of the recently added utility
module, and split it up into nested functions so the overall logic of
the test process can be followed more easily without the details
cluttering the code.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
76b4693928 test/py: add various utility code
Add various common utility functions. These will be used by a forthcoming
re-written UMS test, and a brand-new DFU test.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
3f2faf7327 test/py: optionally ignore errors from shell commands
Sometimes it's useful to run shell commands and ignore any errors. One
example might be cleanup logic; if a test-case experiences an error, the
cleanup logic might experience an error too, and we don't want that error
to mask the original error, so we want to ignore the subsequent error.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
783cbcd360 test/py: log when tests send CTRL-C
Write a note to the log file when a test sends CTRL-C to U-Boot. This
makes it easier to follow what's happening in the logs, especially since
U-Boot doesn't echo the character back to its output, so there's no other
signal of what's going on.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
c10eb9d39f test/py: drain console log at the end of any failed test
Tests may fail for a number of reasons, and in particular for reasons
other than a timeout waiting for U-Boot to print expected data. If the
last operation that a failed test performs is not waiting for U-Boot to
print something, then any trailing output from U-Boot during that test's
operation will not be logged as part of that test, but rather either
along with the next test, or even thrown away, potentiall hiding clues
re: the test failure reason.

Solve this by explicitly draining (and hence logging) the U-Boot output
in the case of failed tests.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
636f38d83a test/py: move U-Boot respawn trigger to the test core
Prior to this change, U-Boot was lazilly (re-)spawned if/when a test
attempted to interact with it, and no active connection existed. This
approach was simple, yet had the disadvantage that U-Boot might be
spawned in the middle of a test function, e.g. after the test had already
performed actions such as creating data files, etc. In that case, this
could cause the log to contain the sequence (1) some test logs, (2)
U-Boot's boot process, (3) the rest of that test's logs. This isn't
optimally readable. This issue will affect the upcoming DFU and enhanced
UMS tests.

This change converts u_boot_console to be a function-scoped fixture, so
that pytest attempts to re-create the object for each test invocation.
This allows the fixture factory function to ensure that U-Boot is spawned
prior to every test. In practice, the same object is returned each time
so there is essentially no additional overhead due to this change.

This allows us to remove:

- The explicit ensure_spawned() call from test_sleep, since the core now
ensures that the spawn happens before the test code is executed.

- The laxy calls to ensure_spawned() in the u_boot_console_*
implementations.

The one downside is that test_env's "state_ttest_env" fixture must be
converted to a function-scoped fixture too, since a module-scoped fixture
cannot use a function-scoped fixture. To avoid overhead, we use the same
trick of returning the same object each time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:22 -07:00
Stephen Warren
d314e247e1 test/py: fix timeout to be absolute
Currently, Spawn.expect() imposes its timeout solely upon receipt of new
data, not on its overall operation. In theory, this could cause the
timeout not to fire if U-Boot continually generated output that did not
match the expected patterns.

Fix the code to additionally impose a timeout on overall operation, which
is the intended mode of operation.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:22 -07:00
Simon Glass
ac94b7bcbe dm: syscon: Allow finding devices by driver data
We have a way to find a regmap by its syscon driver data value. Add the same
for syscon itself.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:19 +08:00
Simon Glass
747440d0fa dm: video: test: Test that bitmap display works correctly
Add a test for the 'bmp' command. Test both the uncompressed and compressed
versions of the file, since they use different code paths.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Simon Glass
85e08db85b dm: video: test: Add tests for rotated consoles
Test that text is displayed correctly when the console is rotated.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Simon Glass
3c97c4fb52 dm: video: test: Add tests for the video uclass
Add tests that check that the video console is working correcty. Also check
that text output produces the expected result. Test coverage includes
character output, wrapping and scrolling.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Stephen Warren
1c8b4d5f4f test/py: add a test for the sleep command
Execute "sleep", and validate that it sleeps for approximately the correct
amount of time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:24 -07:00
Stephen Warren
3045d7f043 test/py: test the ums command
This test invokes the "ums" command in U-Boot, and validates that a USB
storage device is enumerated on the test host system, and can be read
from.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:24 -07:00
Stephen Warren
cc156f3fc0 test/py: test the shell if command
Migrate all most tests from command_ut.c into the Python test system.
This allows the tests to be run against any U-Boot binary that supports
the if command (i.e. where hush is enabled) without requiring that
binary to be permanently bloated with the code from command_ut.

Some tests in command_ut.c can only be executed from C code, since they
test internal (more unit-level) features of various U-Boot APIs. The
migrated tests can all operate directly from the U-Boot console.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00
Stephen Warren
8b86c609b8 test/py: add test of basic shell functionality
This tests whether the following features of the U-Boot shell:
- Execution of a directly entered command.
- Compound commands (; delimiter).
- Quoting of arguments containing spaces.
- Executing commands from environment variables.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00
Stephen Warren
98cee89b55 test/py: test the md/mw commands
This tests whether md/mw work, and affect each-other.

Command repeat is also tested.

test/cmd_repeat.sh is removed, since the new Python-based test does
everything it used to.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00
Stephen Warren
5ab097abad test/py: add test of setenv/printenv/echo
This tests basic environment variable functionality.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00
Stephen Warren
472040d5cb test/py: test that sandbox exits when asked
Test the sandbox port's implementation of the reset command and SIGHUP
handling. These should both cause the U-Boot process to exit gracefully.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00
Stephen Warren
d201506cca test/py: Implement pytest infrastructure
This tool aims to test U-Boot by executing U-Boot shell commands using the
console interface. A single top-level script exists to execute or attach
to the U-Boot console, run the entire script of tests against it, and
summarize the results. Advantages of this approach are:

- Testing is performed in the same way a user or script would interact
  with U-Boot; there can be no disconnect.
- There is no need to write or embed test-related code into U-Boot itself.
  It is asserted that writing test-related code in Python is simpler and
  more flexible that writing it all in C.
- It is reasonably simple to interact with U-Boot in this way.

A few simple tests are provided as examples. Soon, we should convert as
many as possible of the other tests in test/* and test/cmd_ut.c too.

The hook scripts, relay control utilities, and udev rules I use for my
own HW setup are published at https://github.com/swarren/uboot-test-hooks.

See README.md for more details!

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org> #v3
2016-01-20 19:06:23 -07:00
Stephen Warren
08eee2718a test/fs: error case fixes/enhancements
- Use "mkdir -p" to avoid errors when intermediate directories are
  missing.
- Fall back to "dd" when "fallocate" fails. For example, fallocate isn't
  supported on ext4.
- Add error checking for test image generation. Without this, the test
  simply plows on spewing all kinds of errors which are hard to
  immediately root-cause.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-01-13 21:05:21 -05:00
Stephen Warren
7c4213f6a5 block: pass block dev not num to read/write/erase()
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:18 -05:00
Simon Glass
c032241234 dm: test: Convert PCI tests to use the DM PCI API
Update these tests to use driver model API functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-12 10:19:09 -07:00
Simon Glass
a57a817406 dm: test: usb: Update the USB tests so that they all pass
Due to a limitation removed in an earlier patch, USB tests were not seeing
all the devices. Update the tests to pass now that all devices are visible.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-11 15:29:31 -05:00
Simon Glass
b042566dcf dm: Disable all SPI and SPI flash tests
This subsystem has been broken since commit:

  4efad20a  sf: Update status reg check in spi_flash_cmd_wait_ready

There has so far been no response from the maintainer, and a release is
imminent. For now, let's just disable the tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-07 10:27:07 -07:00
Tom Rini
cbb2df2018 CONFIG_NEEDS_MANUAL_RELOC: Fix warnings when not set
Now that we may compile (but not link) code calling fixup_cmdtable when
this is not set, we need to always have the declaration available.  We
should also make sure that anyone calling the function includes
<command.h> as that's where the function declaration is.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-07 08:35:23 -05:00
Michal Simek
d6df048bca dm: cmd: Relocate subcommands when MANUAL_RELOC
Subcommands contain pointers to functions which are not updated when
MANUAL_RELOC is enabled. This patch fix it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:30 +01:00
Simon Glass
bff1a71ede dm: test: usb: sandbox: Add keyboard tests for sandbox
Add a test that verifies that USB keyboards work correctly on sandbox.
This verifies some additional parts of the USB stack.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:52 -07:00
Simon Glass
cd716372b3 dm: test: usb: Add a test for device reordering
Add tests that 'usb tree' produces the right output when a device changes
order on the bus.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:52 -07:00
Simon Glass
431cbd6d82 dm: test: usb: Add tests for the 'usb tree' command
Add tests that this command produces the right output, even when a rescan
results in a device disappearing from the bus.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:52 -07:00
Simon Glass
9ce8b40206 test: Record and silence console in tests
When running sandbox tests, silence the console to avoid unwanted output.
Also, record the console in case tests want to check it.

The -v option can be used to enable stdout during tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:51 -07:00
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Simon Glass
3884c98c32 dm: usb: Avoid time delays in sandbox tests
Currently the USB tests take around two seconds to run. Remove these
unnecessary time delays so that the tests run quickly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Thomas Chou
9961a0b6fb sandbox: add a sandbox timer and basic test
Add a sandbox timer which get time from host os and a basic
test.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:13:41 -07:00
Stephen Warren
34a60d9bc8 test: fat: add error-checking to non-contig test
Check the result code of all command that are executed. Without this,
if the fallocate invocation fails (this feature is not supported on ext3
filesystems for example) then a zero-length output file will be created,
and subsequent the mkfs and mount invocations will fail, which will cause
the subsequent dd invocation to attempt to fill up the host's entire free
disk space. That's not a nice user experience!

Related, if fallocate does fail, try to create the test disk image using
dd instead. That should work everywhere.

Fixes: 4a28274227 ("test: fat: add test of non-contiguous file reads")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-11-18 15:28:59 -05:00
Przemyslaw Marczak
c48cb7ebfb sandbox: add ADC unit tests
This commit adds unit tests for ADC uclass's methods using sandbox ADC.

Testing proper ADC binding:
- dm_test_adc_bind()                    - device binding
- dm_test_adc_wrong_channel_selection() - checking wrong channel selection

Testing ADC supply operations:
- dm_test_adc_supply():
  - Vdd/Vss values validating
  - Vdd regulator updated value validating
  - Vdd regulator's auto enable state validating

Testing ADC operations results:
- dm_test_adc_single_channel_conversion() - single channel start/data
- dm_test_adc_single_channel_shot()       - single channel shot
- dm_test_adc_multi_channel_conversion()  - multi channel start/data
- dm_test_adc_multi_channel_shot()        - multi channel single shot

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00
Tom Rini
0eb4cf9c14 Merge branch 'master' of git://git.denx.de/u-boot-net 2015-10-29 16:30:33 -04:00
Bin Meng
6d9764c2a8 dm: test: Add a new test case against dm eth codes for NULL pointer access
U-Boot crashes when doing a 'ping' with the following test scenario:

  - All ethernet devices are not probed
  - "ethaddr" for all ethernet devices are not set
  - "ethact" is set to a valid ethernet device name

Add a new test case 'dm_test_eth_act' to hit such scenario.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-29 14:05:52 -05:00
Tom Rini
2431492aef Merge git://git.denx.de/u-boot-dm 2015-10-27 19:08:19 -04:00
Stephen Warren
47b7164450 fs-test.sh: fix pre-requisite detection
In the following snippet:

if [ ! -x `which $prereq` ]; then

When $prereq does not exist, `which $prereq` evaluates to the empty string,
which results in *no* argument being passed to the -x operator, which then
evaluates to true, which is the equivalent of the prereq having been found. In
order for this to fail as expected, we must pass an empty argument, which then
causes -x to fail. Do this by wrapping the `` in quotes so there's always an
argument to -x, even if the value of the argument is zero-length.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-10-24 13:50:34 -04:00
Stephen Warren
4a28274227 test: fat: add test of non-contiguous file reads
In my patch series to replace fs/fat with "ff.c", I enhanced ff.c to
optimize file reading, so that reads of contiguous clusters are submitted
to the IO device as a single read. This test attempts to torture-test
edge-cases of that enhancement.

BTW, the only way I found to validate that this script actually does
create non-contiguous files was to manually inspect the FAT bitmap in a
hex dump of the FAT image. hdparm --fibmap doesn't work on loop-mounted
filesystems. filefrag -v -e seems to lie about files being contiguous
when they aren't.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-10-24 13:50:34 -04:00
Simon Glass
bcbe3d1579 dm: Rename dev_get_parentdata() to dev_get_parent_priv()
The current name is inconsistent with other driver model data access
functions. Rename it and fix up all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-10-23 09:42:28 -06:00
Nishanth Menon
bfaa2d99dc test: Add basic tests for remoteproc
Use the sandbox environment for the basic tests.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:40 -04:00
Tom Rini
e8de6d7b4a test/fs/fs-test.sh: Update expected results and TC10 logic
With the changes in 7a3e70c we now get read(2) behavior so trying to
read 2MB with 1MB left in the file results in 1MB read and a warning.
We update the test logic here to make sure we read back 1MB as expected.
This change however changes the overall summary as while EXT4 continues
to not have offset support the test now fails when expected to pass
rather than fails when expected to fail (and we report that as pass).

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-11 17:12:14 -04:00
Julius Werner
027b728d4a Add support for LZ4 decompression algorithm
This patch adds support for LZ4-compressed FIT image contents. This
algorithm has a slightly worse compression ration than LZO while being
nearly twice as fast to decompress. When loading images from a fast
storage medium this usually results in a boot time win.

Sandbox-tested only since I don't have a U-Boot development system set
up right now. The code was imported unchanged from coreboot where it's
proven to work, though. I'm mostly interested in getting this recognized
by mkImage for use in a downstream project.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-11 17:12:10 -04:00
Simon Glass
cbfc2ff9da dm: test: Show the amount of leaked memory on error
Adjust the memory leak tests to show the amount of memory leaked. This can
be a useful signal as to what is wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-05 15:47:49 +01:00
Bin Meng
71d7971fac dm: test: Add a new test case for dm_test_eth_rotate
Add one more ethernet device node in the sandbox test device tree,
with name 'sbe5'. This is to support a new test case for testing
network device rotation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-09 07:48:03 -06:00
Lukasz Majewski
33a6103578 dfu:tests: Modify dfu_gadget_test.sh to accept USB device vendor:product ID
dfu-util allows filtering on USB device vendor:product ID by using
the -d flag (-d 0451:d022).
Such option is very handy when many DFU devices are connected to a single
host PC. This commit allows testing when above situation emerges.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Reviewed-by: Simon Glass <sjg@chromium.org>

Tested-by: Lukasz Majewski <l.majewski@majess.pl>
Test HW - AM335x Beagle Bone Black
NOTE: Max size of file to transfer: 2MiB
2015-09-07 13:41:03 +02:00
Stephen Warren
04812605f3 fs-test.sh: minor fixes
- Re-direct stderr into the log files, so any errors U-Boot emits are
  visible in the logs. This is relevant if the "reset" shell command
  attempts to report that it's not supported on the sandbox board.
- Fix test_fs_nonfs() to name the files it created differently for each
  invocation. Otherwise, the logs from different tests overwrite
  each-other.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Suriyan Ramasami <suriyan.r@gmail.com>
2015-08-18 13:45:59 -04:00
Masahiro Yamada
40b6f2d020 devres: add debug command to dump device resources
This new command can dump all device resources associated to
each device.  The fields in every line shows:
  - The address of the resource
  - The size of the resource
  - The name of the release function
  - The stage in which the resource has been acquired (BIND/PROBE)

Currently, there is no driver using devres, but if such drivers are
implemented, the output of this command should look like this:

=> dm devres
- root_driver
- soc
- extbus
- serial@54006800
    bfb541e8 (8 byte) devm_kmalloc_release  BIND
    bfb54440 (4 byte) devm_kmalloc_release  PROBE
    bfb54460 (4 byte) devm_kmalloc_release  PROBE
- serial@54006900
    bfb54270 (8 byte) devm_kmalloc_release  BIND
- gpio@55000000
- i2c@58780000
    bfb5bce8 (12 byte) devm_kmalloc_release  PROBE
    bfb5bd10 (4 byte) devm_kmalloc_release  PROBE
- eeprom
    bfb54418 (12 byte) devm_kmalloc_release  BIND

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-06 07:44:29 -06:00
Simon Glass
86075bab27 test: Add a test for regmap
We use syscon to test that the regmap functions work as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:33 -06:00
Simon Glass
04035fd36c dm: test: Add a test for the system controller uclass
Add a test to confirm that we can access system controllers and find their
driver data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:33 -06:00
Simon Glass
3c43fba3d2 dm: test: Add a test for the LED uclass
Add a test to confirm that we can adjust LEDs using the led_gpio driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
8e6cc46178 dm: test: Add a test for the mmc uclass
Add a test to confirm that we can probe this device. Since there is no
MMC stack support in sandbox at present, this is as far as the test goes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
64ce0cad9e dm: test: Add a test for the ram uclass
Add a test to confirm that we can probe this device and get information on
the available RAM.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
201c29a2d6 dm: test: Add a test for the reset uclass
Add tests that confirm that the drivers work as expected, and we can walk
through the available reset types trying to reset the board.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:31 -06:00
Simon Glass
6a1c7cef14 dm: test: Add tests for the clk uclass
Add tests of each API call using a sandbox clock device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:30 -06:00
Simon Glass
c02790ce12 dm: test: Allow test names to leave out the dm_test_ prefix
All driver model tests have a dm_test_ prefix. Ignore it when matching a
test name. This makes it easier to run individual tests, like this:

   ./sandbox/u-boot -d ./sandbox/arch/sandbox/dts/test.dtb \
	-c "ut dm clk_periph"

We can use 'clk_periph' instead of 'dm_test_clk_periph'.

Also print a message if the requested test is not found.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:30 -06:00
Simon Glass
3b55d30f6f dm: pmic: Split output from function
The regulator_autoset() function mixes printf() output and PMIC adjustment
code. It provides a boolean to control the output. It is better to avoid
missing logic and output, and this permits a smaller SPL code size. So
split the output into a separate function.

Also rename the function to have a by_name() suffix, since we would like
to be able to pass a device when we know it, and thus avoid the name
search.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21 17:39:26 -06:00
Simon Glass
304fbef156 dm: Move the tree/uclass dump code into its own file
In SPL it is sometimes useful to be able to obtain a dump of the current
driver model state. Since commands are not available, provide a way to
directly call the functions to output this information.

Adjust the existing commands to use these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:22 -06:00
Simon Glass
2bb02e4fe2 dm: pci: Allow PCI bus numbering aliases
Commit 9cc36a2 'dm: core: Add a flag to control sequence numbering' changed
the default uclass behaviour to not support bus numbering. This is incorrect
for PCI and that commit should have enabled the flag for PCI.

Enable it so that PCI buses can be found and the 'pci' command works again.
Also add a test for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:34:47 -06:00
Karl Apsite
657fd2d031 add test for two 'loadables'
Nothing too fancy.  A simple test that attmpts to load two loadables and
verify that they are properly unpacked in the u-boot sandbox.
Signed-off-by: Karl Apsite <Karl.Apsite@dornerworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-28 08:18:21 -04:00
Joe Hershberger
f68c2b2592 test: env: Add a test of the new regex behavior for attrs
The behavior of the env attrs depends on CONFIG_REGEX. Add an additional
test if that variable is set.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
b04d3553ee test: env: Add test for verifying env attrs
Add a test of the env_attr_lookup() function.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
421f86f329 test: env: Add test framework for env
Add a new "env" subcommand to the ut command.

This will run unit tests on the env code. This should be targetable to
any device that supports the env features needed for the tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
b6227d3993 test: dm: Recover the driver model tree after tests
Put the driver model for the system back into a good state after
completing the DM testing.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
09129bec8e test: dm: eth: Handle failed test env cleanup
Make sure that the env gets cleaned up after a test fails so that other
tests aren't affected.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:16:17 -04:00
Joe Hershberger
7cccc66af5 test: dm: Don't bail on all tests if one test fails
There's not much point in having a failure count if we always give up on
the first failure. Also stop clearing the entire state between tests.

Make sure that any failures are still passed out to the command line.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
feb3847250 test: Move the unit tests to their own menu
Make all unit tests selectable as a menu of test suites instead of just
sitting in the top-level menu individually.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
c812f722f8 test: dm: Move the time test over to the ut command
Unify the command for running unit tests further by moving the "ut_time"
command over to "ut time".

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:16:17 -04:00
Joe Hershberger
40441e0bd3 test: dm: Move the dm tests over to the ut command
Unify the command for running unit tests further by moving the "dm test"
command over to "ut dm".

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
c617ede08a test: Add a common unit test command
Add a command that all other unit tests should be a sub-command of.
Also include a command that will run all tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
e721b882e9 test: Generalize the unit test framework
Separate the ability to define tests and assert status of test functions
from the dm tests so they can be used more consistently throughout all
tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:16 -04:00
Joe Hershberger
73c2bbeea3 net: Apply default format rules to all ethaddr
Use a regular expression to apply the default formatting flags for all
ethaddr env vars.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:20 -04:00
Przemyslaw Marczak
f64000c302 test: dm: test.dts - move to sandbox dts directory
The file test.dts from driver model test directory,
was compiled by call dtc in script: test/dm/test-dm.sh.

This doesn't allow for including of dtsi files and using
of C preprocessor routines in this dts file.

Since the mentioned script builds U-Boot before tests,
then moving the test.dts file into sandbox dts directory
is reasonable.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:59:07 -06:00
Przemyslaw Marczak
e8f339e0e8 test: dm: add sandbox PMIC framework tests
This change adds new file to sandbox driver model test environment.
The file is: test/dm/power.c, and it includes tests for PMIC framework,
which includes PMIC uclass and REGULATOR uclass.

All tests are based od Sandbox PMIC emulated device. Some test constants for
this device are defined in the header: include/power/sandbox_pmic.h

PMIC tests includes:
- pmic get - tests, that pmic_get() returns the requested device
- pmic I/O - tests I/O by writing and reading some values to PMIC's registers
             and then compares, that the write/read values are equal.

The regulator tests includes:
- Regulator get by devname/platname
- Voltage set/get
- Current set/get
- Enable set/get
- Mode set/get
- Autoset
- List autoset

For the regulator 'get' test, the returned device pointers are compared,
and their names are also compared to the requested one.
Every other test, first sets the given attribute and next try to get it.
The test pass, when the set/get values are equal.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Simon Glass
8271f5d4c3 test: Add a simple time test
Sometimes the time functions are incorrect due to bad time support on a
board. Add a unit test which tries to detect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06 12:48:37 -06:00
Simon Glass
4772511475 dm: rtc: Add tests for real-time clocks
Add some simple tests to verify that the RTC uclass works correctly in
U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Simon Glass
fbe07ba0f8 dm: test: dts: Sort the aliases in the test device tree file
Sort these aliases to avoid confusion as to what is present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-05 20:58:40 -06:00
Simon Glass
182bf92d19 dm: i2c: Add an explicit test mode to the sandbox I2C driver
At present this driver has a few test features. They are needed for running
the driver model unit tests but are confusing and unnecessary if using
sandbox at the command line. Add a flag to enable the test mode, and don't
enable it by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:19 -06:00
Joe Hershberger
172a31bf87 test: dm: eth: Skip timeouts on ping tests
Indicate to the emulated sandbox Ethernet driver when we expect a
timeout and tell it to leap forward.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:18 -06:00
Simon Glass
f9fd4558ea dm: test: Don't clear global_data in dm_test_uclass_before_ready()
We must not clear global_data even in tests, since the ram_buffer (which
is used by malloc()) will also be lost, and subsequent tests will fail.

Zero only the global_data fields that are required for the test to function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-22 11:15:36 -06:00
Przemyslaw Marczak
6e0c4880c8 dm: test: Add tests for get/find uclass's device by name
This commit introduces simple tests for functions:
- uclass_find_device_by_name()
- uclass_get_device_by_name()

Tests added by this commit:
- Test: dm_test_uclass_devices_find_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_find_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_find_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

- Test: dm_test_uclass_devices_get_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_get_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_get_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * founddev is active
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:16 -06:00
Przemyslaw Marczak
9e85f13ddc dm: test: Add tests for get/find uclass devices
This commit introduces simple tests for functions:
- uclass_find_first_device()
- uclass_find_next_device()
- uclass_first_device()
- uclass_next_device()

Tests added by this commit:
- Test: dm_test_uclass_devices_find:
  * call uclass_find_first_device(), then check if: (dev != NULL), (ret == 0)
  * for the rest devices, call uclass_find_next_device() and do the same check

- Test: dm_test_uclass_devices_get:
  * call uclass_first_device(), then check if:
    -- (dev != NULL), (ret == 0), device_active()
  * for the rest devices, call uclass_next_device() and do the same check

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Przemyslaw Marczak
754e71e850 dm: test: Add tests for device's uclass platform data
This test introduces new test structure type:dm_test_perdev_uc_pdata.
The structure consists of three int values only. For the test purposes,
three pattern values are defined by enum, starting with TEST_UC_PDATA_INTVAL1.

This commit adds two test cases for uclass platform data:
- Test: dm_test_autobind_uclass_pdata_alloc - this tests if:
  * uclass driver sets: .per_device_platdata_auto_alloc_size field
  * the devices's: dev->uclass_platdata is non-NULL

- Test: dm_test_autobind_uclass_pdata_valid - this tests:
  * if the devices's: dev->uclass_platdata is non-NULL
  * the structure of type 'dm_test_perdev_uc_pdata' allocated at address
    pointed by dev->uclass_platdata. Each structure field, should be equal
    to proper pattern data, starting from .intval1 == TEST_UC_PDATA_INTVAL1.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Joe Hershberger
bc0571fc10 net: cosmetic: Fix checkpatch.pl failures in net.c
Finish eliminating CamelCase from net.c and other failures

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:35 -06:00
Joe Hershberger
049a95a775 net: cosmetic: Change IPaddr_t to struct in_addr
This patch is simply clean-up to make the IPv4 type that is used match
what Linux uses. It also attempts to move all variables that are IP
addresses use good naming instead of CamelCase. No functional change.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Simon Glass
e00cb2232b dm: usb: Add tests for the USB uclass
This adds a simple test for probing and a functional test using the flash
stick emulator, which tests a large chunk of the USB stack.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
57f54d55bd dm: test: Allow 'dm test' to select a particular test to run
As well as running all tests, it is useful to be able to run a selected test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
b66c0a662b dm: test: Correct printf() output nit in 'dm uclass'
Neither the hyphen nor the equals sign is needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
206d4d2b4b dm: core: Mark device as active before calling uclass probe() methods
The uclass pre-probe functions may end up calling back into the device in
some circumstances. This can fail if recursion takes place. Adjust the
ordering so that we mark the device as active early, then retract this
later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:19 -06:00
Simon Glass
e23eb614a4 dm: test: bus: Use a local variable to simplify code
Adjust this test to avoid repeating the same code too often.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:19 -06:00
Joe Hershberger
60304592b9 net: Improve error handling
Take a pass at plumbing errors through to the users of the network stack

Currently only the start() function errors will be returned from
NetLoop(). recv() tends not to have errors, so that is likely not worth
adding. send() certainly can return errors, but this patch does not
attempt to plumb them yet. halt() is not expected to error.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:14 -06:00
Joe Hershberger
7ece1c61ad test: dm: net: Add a test of the netretry behavior
The effect of the "netretry" env var was recently changed. This test
checks that behavior.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
7d104eab7d test: dm: eth: Add testing for ethrotate env var
Make sure that the ethrotate behavior occurs as expected.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
6536b9bb76 dm: eth: Add support for ethprime env var
The ethprime env var is used to indicate the starting device if none is
specified in ethact. Also support aliases specified in the ethprime var.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
e58780dcb7 dm: eth: Add support for aliases
Allow network devices to be referred to as "eth0" instead of
"eth@12345678" when specified in ethact.

Add tests to verify this behavior.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
bfacad7da1 test: dm: eth: Add tests for the eth dm implementation
Add a test for the eth uclass using the sandbox eth driver. Verify basic
functionality of the network stack / eth uclass by exercising the ping
function.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:12 -06:00
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Joe Hershberger
eb374221ec test: dm: Reorder the objects to build
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
d3b7ff14f4 dm: pci: Add driver model tests for PCI
Add some basic tests to check that things work as expected with sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
fa67f90fc3 dm: Show both allocated and requested seq numbers in 'dm uclass'
Both of these values are useful for understanding what is going on, so show
them both.

The requested number comes from a device tree alias. The allocated one is
set up when the device is activated, and is unique throughout the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
02c07b3741 dm: core: Add a uclass pre_probe() method for devices
Some uclasses want to set up a device before it is probed. Add a method
for this.

An example is with PCI, where a PCI uclass wants to set up its private
data for later use. This allows the device's uclass() method to make calls
whcih use that data (for example, read PCI memory regions from device
tree, set up bus numbers).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
e564f054af dm: core: Add dev_get_uclass_priv() to access uclass private data
Add a convenience function to access the private data that a uclass stores
for each of its devices. Convert over most existing uses for consistency
and to provide an example for others.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
1967982a95 dm: test: Add a Kconfig file
Add a file to control driver model test features.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:34 -07:00
Simon Glass
ca88b9b939 dm: i2c: Add a dm_ prefix to driver model bus speed functions
As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model
versions of these functions to avoid conflicts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-02-12 10:35:33 -07:00
Tom Rini
8e3da9dd11 Merge branch 'master' of git://git.denx.de/u-boot-dm 2015-01-30 09:24:42 -05:00
Simon Glass
d0cff03e18 dm: spi: Move slave details to child platdata
At present we go through various contortions to store the SPI slave's chip
select in its private data. This only exists when the slave is active so
must be set up when it is probed. Until the device is probed we don't
actually know what chip select it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the chip select when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:56 -07:00
Simon Glass
83c7e434c9 dm: core: Allow uclass to set up a device's child before it is probed
Some buses need to set up their devices before they can be used. This setup
may well be common to all buses in a particular uclass. Support a common
pre-probe method for the uclass, called before any bus devices are probed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
081f2fcbd9 dm: core: Allow the uclass to set up a device's child after binding
For buses, after a child is bound, allow the uclass to perform some
processing. This can be used to figure out the address of the child (e.g.
the chip select for SPI slaves) so that it is ready to be probed.

This avoids bus drivers having to repeat the same process, which really
should be done by the uclass, since it is common.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
dac8db2ce6 dm: core: Allow uclasses to specify private data for a device's children
In many cases the per-child private data for a device's children is defined
by the uclass rather than the individual driver. For example, a SPI bus
needs to store information about each of its children, but all SPI drivers
store the same information. It makes sense to allow the uclass to define
this data.

If the driver provides a size value for its per-child private data, then use
it. Failng that, fall back to that provided by the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
9cc36a2b89 dm: core: Add a flag to control sequence numbering
At present we try to use the 'reg' property and device tree aliases to give
devices a sequence number. The 'reg' property is often actually a memory
address, so the sequence numbers thus-obtained are not useful. It would be
better if the devices were just sequentially numbered in that case. In fact
neither I2C nor SPI use this feature, so drop it.

Some devices need us to look up an alias to number them within the uclass.
Add a flag to control this, so it is not done unless it is needed.

Adjust the tests to test this new behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
b367053102 dm: core: Add a function to get a device's uclass ID
This is useful to check which uclass a device is in.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
0118ce7957 dm: core: Add a post_bind method for parents
Allow parent drivers to be called when a new child is bound to them. This
allows a bus to set up information it needs for that child.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
ba8da9dc43 dm: core: Allow uclasses to specify platdata for a device's children
In many cases the child platform data for a device's children is defined by
the uclass rather than the individual devices. For example, a SPI bus needs
to know the chip select and speed for each of its children. It makes sense
to allow this information to be defined the SPI uclass rather than each
individual driver.

If the device provides a size value for its child platdata, then use it.
Failng that, fall back to that provided by the uclass.

Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:55 -07:00
Simon Glass
cdc133bde9 dm: core: Allow parents to have platform data for their children
For buses it is common for parents to need to know the address of the child
on the bus, the bus speed to use for that child, and other information. This
can be provided in platform data attached to each child.

Add driver model support for this, including auto-allocation which can be
requested using a new property to specify the size of the data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:54 -07:00
Simon Glass
f8a85449ef dm: core: Allocate platform data when binding a device
When using allocated platform data, allocate it when we bind the device.
This makes it possible to fill in this information before the device is
probed.

This fits with the platform data model (when not using device tree),
since platform data exists at bind-time.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:54 -07:00
Simon Glass
22cc069160 dm: Don't run tests if U-Boot cannot be built
There is no point in running the tests if U-Boot cannot be built. Abort in
this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:54 -07:00
Simon Glass
25ab4b0303 dm: i2c: Provide an offset length parameter where needed
Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-01-29 17:09:53 -07:00
Simon Glass
f9a4c2da72 dm: i2c: Rename driver model I2C functions to permit compatibility
Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
3669e0e759 dm: gpio: Add better functions to request GPIOs
At present U-Boot sort-of supports the standard way of reading GPIOs from
device tree nodes, but the support is incomplete, a bit clunky and only
works for GPIO bindings where #gpio-cells is 2.

Add new functions to request GPIOs, taking full account of the device
tree binding. These permit requesting a GPIO with a simple call like:

   gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN);

This will request the GPIO, looking at the device's node which might be
this, for example:

   cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>;

The GPIO will be set to input mode in this case and polarity will be
honoured by the GPIO calls.

It is also possible to request and free a list of GPIOs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Guilherme Maciel Ferreira
39931f966a dumpimage: fit: extract FIT images
The dumpimage is able to extract components contained in a FIT image:

  $ ./dumpimage -T flat_dt -i CONTAINER.ITB -p INDEX FILE

The CONTAINER.ITB is a regular FIT container file. The INDEX is the poisition
of the sub-image to be retrieved, and FILE is the file (path+name) to save the
extracted sub-image.

For example, given the following kernel.its to build a kernel.itb:

  /dts-v1/;
  / {
      ...
      images {
        kernel@1 {
          description = "Kernel 2.6.32-34";
          data = /incbin/("/boot/vmlinuz-2.6.32-34-generic");
          type = "kernel";
          arch = "ppc";
          os = "linux";
          compression = "gzip";
          load = <00000000>;
          entry = <00000000>;
          hash@1 {
            algo = "md5";
          };
        };
        ...
      };
      ...
    };

The dumpimage can extract the 'kernel@1' node through the following command:

  $ ./dumpimage -T flat_dt -i kernel.itb -p 0 kernel
  Extracted:
   Image 0 (kernel@1)
    Description:  Kernel 2.6.32-34
    Created:      Wed Oct 22 15:50:26 2014
    Type:         Kernel Image
    Compression:  gzip compressed
    Data Size:    4040128 Bytes = 3945.44 kB = 3.85 MB
    Architecture: PowerPC
    OS:           Linux
    Load Address: 0x00000000
    Entry Point:  0x00000000
    Hash algo:    md5
    Hash value:   22352ad39bdc03e2e50f9cc28c1c3652

Which results in the file 'kernel' being exactly the same as '/boot/vmlinuz-2.6.32-34-generic'.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Guilherme Maciel Ferreira
f41f5b7c05 dumpimage: add 'T' option to explicitly set the image type
Some image types, like "KeyStone GP", do not have magic numbers to
distinguish them from other image types. Thus, the automatic image
type discovery does not work correctly.

This patch also fix some integer type mismatches.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Simon Glass
6ed4dc7876 test: Add unit tests for bootm image decompression
Use each compression method (including uncompressed). Test for normal
operation, insufficient space and corrupted data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Simon Glass
ac9a215de0 test: Rename test_compression to ut_compression
Try to keep the names of the unit test commands consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Simon Glass
cc4477289d test: Add DEBUG output option to test-fit.py
Sometimes it is useful to see the output from U-Boot, so add an option to
make this easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Simon Glass
b5493d17bd sandbox: Correct ordering of 'sb save' commands
Prior to commit d455d87 there was an inconsistency between the position of
the 'address' parameter in 'sb load' and 'sb save'. This was corrected but
it broke some tests. Fix the tests and also the help for 'sb save'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Tom Rini
a5a5882611 Merge git://git.denx.de/u-boot-dm 2014-12-11 20:47:34 -05:00
Tom Rini
fc9b0b8043 Merge branch 'master' of git://git.denx.de/u-boot-usb
Conflicts:
	board/freescale/mx6sxsabresd/mx6sxsabresd.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-12-11 18:40:49 -05:00
Simon Glass
ecc2ed55ee dm: i2c: Add tests for I2C
Add some basic tests to check that the system works as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2014-12-11 13:18:43 -07:00
Masahiro Yamada
a56642c7ba dm_test: improve the appearance shown by "dm tree" command
The command "dm tree" lists devices in a tree-like format.
This commit makes it look more like what the Unix command "tree"
shows.

=> dm tree
 Class       Probed   Name
----------------------------------------
 root        [ + ]    root_driver
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 gpio        [   ]    |-- gpio_sandbox
 serial      [   ]    |-- serial_sandbox
 serial      [ + ]    |-- serial
 demo        [   ]    |-- triangle
 demo        [   ]    |-- square
 demo        [   ]    |-- hexagon
 gpio        [   ]    |-- gpios
 spi         [   ]    |-- spi@0
 spi_emul    [   ]    |   `-- flash@0
 cros_ec     [ + ]    `-- cros-ec@0

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:41 -07:00
Suriyan Ramasami
6c016485a6 sandbox: script for testing sandbox/ext4/fat/fs commands
Test size/read/write commands in a sandbox environment.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>

Acked-by: Simon Glass <sjg@chromium.org>
2014-11-23 06:49:05 -05:00
Lukasz Majewski
fbd3b79d77 test: ums: Add sleep before unmount directory
This change helps to run script on machines with quite long uptime.
Without this the following error emerges:

File: ./dat_14M.img
umount: /mnt/tmp-ums-test: device is busy.
        (In some cases useful info about processes that use
         the device is found by lsof(8) or fuser(1))
TX: md5sum:083d3d22b542d3ecba61b12d17e03f9f
mount: /dev/sdd6 already mounted or /mnt/tmp-ums-test busy
mount: according to mtab, /dev/sdd6 is already mounted on /mnt/tmp-ums-test

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-11-14 21:09:12 +01:00
Rabin Vincent
2302b3ab85 hush: make run_command() return an error on parsing failure
run_command() returns success even if the command had a syntax error;
correct this behaviour.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Simon Glass <sjg@chromium.org)
2014-11-07 16:27:06 -05:00
Rabin Vincent
484408fb51 hush: return consistent codes from run_command()
Attempting to run:
 - an empty string
 - a string with just spaces

returns different error codes, 1 for the empty string and 0
for the string with just spaces.  Make both of them return
0 for consistency.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Simon Glass <sjg@chromium.org)
2014-11-07 16:27:06 -05:00
Simon Glass
b01495e644 test: Add a simple test to detected warnings with uint64_t, uintptr_t
These types are problematic because they are typically declared in a
non-standard way in U-Boot. For example, U-Boot uses 'long long' for
int64_t even on a 64-bit machine whereas stdint.h uses 'long'.
Similarly, U-Boot always uses 'long' for intptr_t whereas stdint.h mostly
uses 'int'.

This simple test script runs a few toolchains on a few archs to check for
warnings.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27 11:04:01 -04:00
Simon Glass
87b6398b46 cli: hush: Adjust 'run' command to run each line of the env var
The run command treats each argument an an environment variable. It gets the
value of each variable and executes it as a command. If an environment
variable contains a newline and the hush cli is used, it is supposed to
execute each line one after the other.

Normally a newline signals to hush to exit - this is used in normal command
line entry - after a command is entered we want to return to allow the user
to enter the next one. But environment variables obviously need to execute
to completion.

Add a special case for the execution of environment variables which
continues when a newline is seen, and add a few tests to check this
behaviour.

Note: it's not impossible that this may cause regressions in other areas.
I can't think of a case but with any change of behaviour with limited test
coverage there is always a risk. From what I can tell this behaviour has
been around since at least U-Boot 2011.03, although this pre-dates sandbox
and I have not tested it on real hardware.

Reported-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27 11:03:33 -04:00
Simon Glass
4324174d03 test: dm: Add additional GPIO tests
Add tests for gpio_requestf() and for memory leaks.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:53 -06:00
Simon Glass
756ac0bb15 test: dm: Support memory leak checking as a core feature
Check the state of the malloc() heap before each test is run, so that tests
can verify that all is well at the end. Provide helper functions to mark
the heap and to check that it returns to its initial state.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:53 -06:00
Simon Glass
d44f597b12 dm: gpio: Add gpio_requestf() helper for printf() strings
Add a helper which permits a printf()-style format string for the requester
string.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
4b8f11c2cc test: dm: Update GPIO tests for new gpio_request() method
Now that gpio_request() is handled by the uclass, updates the tests
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
0ae0cb7b50 dm: sf: Add tests for SPI flash
Add a simple test for SPI that uses SPI flash. It operates by creating a
SPI flash file and using the 'sf test' command to test that all
operations work correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:52 -06:00
Simon Glass
ebcab48a03 dm: spi: Add tests
These tests use SPI flash (and the sandbox emulation) to operate.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:51 -06:00
Simon Glass
a8981d4f80 dm: core: Add functions for iterating through device children
Buses need to iterate through their children in some situations. Add a few
functions to make this easy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:45 -06:00
Simon Glass
129acd4c75 test: Add a test for command repeat
This performs a command, then repeats it, and checks that the repeat
happens.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Simon Glass
07b342783a test: Remove tabs from trace test
These cause U-Boot to print a list of available commands. It doesn't break
the test, but it is best to remove them from the output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Simon Glass
dfe6f4d684 Correct sandbox filesystem commands in FIT image test
The host filesystem name has changed, so update the tests. The tests now
run again correctly:

$ make O=b/sandbox sandbox_defconfig all
...
$ test/image/test-fit.py -u b/sandbox/u-boot
FIT Tests

=========
Kernel load
Kernel + FDT load
Kernel + FDT + Ramdisk load

Tests passed
Caveat: this is only a sanity check - test coverage is poor

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00
Lukasz Majewski
801123fe50 test: ums: Add script for testing UMS gadget operation
This commit adds new test for UMS USB gadget to u-boot mainline tree.
It is similar in operation to the one already available in test/dfu
directory.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20 13:10:33 +02:00
Lukasz Majewski
4c984c8136 test: dfu: cosmetic: Add missing license information to DFU test scripts
By mistake I've forgotten to add the SPDX license tags for the DFU testing
scripts.
This commit fixes that and also provides some other relevant information.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20 13:10:33 +02:00
Lukasz Majewski
0d7f85f057 test: dfu: Extend dfu_gadget_test_init.sh to accept sizes of test files
It is now possible to pass to the dfu_gadget_test_init.sh script the sizes
of files to be generated.

This feature is required by UMS tests which reuse this code.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20 13:10:32 +02:00
Michael van der Westhuizen
e0f2f15534 Implement generalised RSA public exponents for verified boot
Remove the verified boot limitation that only allows a single
RSA public exponent of 65537 (F4).  This change allows use with
existing PKI infrastructure and has been tested with HSM-based
PKI.

Change the configuration OF tree format to store the RSA public
exponent as a 64 bit integer and implement backward compatibility
for verified boot configuration trees without this extra field.

Parameterise vboot_test.sh to test different public exponents.

Mathematics and other hard work by Andrew Bott.

Tested with the following public exponents: 3, 5, 17, 257, 39981,
50457, 65537 and 4294967297.

Signed-off-by: Andrew Bott <Andrew.Bott@ipaccess.com>
Signed-off-by: Andrew Wishart <Andrew.Wishart@ipaccess.com>
Signed-off-by: Neil Piercy <Neil.Piercy@ipaccess.com>
Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Cc: Simon Glass <sjg@chromium.org>
2014-08-09 11:17:01 -04:00
Stephen Warren
54ce79c8a5 test: dfu: add some more test cases
On Tegra, the DFU buffer size is 1M. Consequently, the 8M test always
fails. Add tests for the 1M size, and one byte less as a corner case,
so that some large tests are executed and expected to pass.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:17:00 -04:00
Stephen Warren
c0e6663b0a test: dfu: cleanup before execution
Call cleanup() before running tests too. If a previous test was CTRL-C'd
some stale files may have been left around. dfu-util refuses to receive
a file to a filename that already exists, which results in false test
failures if the files aren't cleaned up first.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:17:00 -04:00
Lukasz Majewski
50a3532128 test:dfu: README file update
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-08-09 11:17:00 -04:00
Stephen Warren
7ad67e5554 test: dfu: script enhancements
Various misc enhancements to dfu_gadget_test.sh:

* After every write (download), perform a write to a different file
  with different data. This ensures that the DFU buffer's content is
  replaced, so that if the read (upload) succeeds, we know that the
  correct data was actually read from the storage device, rather than
  simply being left over in the DFU buffer. This requires two alt
  setting names to be passed to the script, and a dummy data file to
  be generated by dfu_gadget_test_init.sh.

* Fix the assumption that dfu_gadget_test.sh is run from the directory
  that contains it, by cd'ing to that directory before invoking
  ./dfu_gadget_test_init.sh.

* Use $DIR$RCV_DIR consistently, rather than using plain $RCV_DIR in
  some places.

* Add 959, 961 test file sizes, to be consistent with having one
  more than and one less than all the other "round" sizes 64, 128, and
  4096.

* Remove references to $BKP_DIR from dfu_gadget_test_init.sh, since it
  isn't used.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:59 -04:00
Lukasz Majewski
a4c86bbb5a test:dfu: Add test scripts for testing DFU regression
This commit adds test scripts for testing if any commit has introduced
regression to the DFU subsystem.

It uses md5 to test if sent and received file is correct.
The test detailed description is available at README file.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-08-09 11:16:59 -04:00
Simon Glass
a327dee0f4 dm: Add child_pre_probe() and child_post_remove() methods
Some devices (particularly bus devices) must track their children, knowing
when a new child is added so that it can be set up for communication on the
bus.

Add a child_pre_probe() method to provide this feature, and a corresponding
child_post_remove() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
e59f458de6 dm: Introduce per-child data for devices
Some device types can have child devices and want to store information
about them. For example a USB flash stick attached to a USB host
controller would likely use this space. The controller can hold
information about the USB state of each of its children.

The data is stored attached to the child device in the 'parent_priv'
member. It can be auto-allocated by dm when the child is probed. To
do this, add a per_child_auto_alloc_size value to the parent driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
997c87bb0b dm: Add functions to access a device's children
Devices can have childen that can be addressed by a simple index, the
sequence number or a device tree offset. Add functions to access a child
in each of these ways.

The index is typically used as a fallback when the sequence number is not
available. For example we may use a serial UART with sequence number 0 as
the console, but if no UART has sequence number 0, then we can fall back
to just using the first UART (index 0).

The device tree offset function is useful for buses, where they want to
locate one of their children. The device tree can be scanned to find the
offset of each child, and that offset can then find the device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
1ca7e2062b dm: Provide a function to scan child FDT nodes
At present only root nodes in the device tree are scanned for devices.
But some devices can have children. For example a SPI bus may have
several children for each of its chip selects.

Add a function which scans subnodes and binds devices for each one. This
can be used for the root node scan also, so change it.

A device can call this function in its bind() or probe() methods to bind
its children.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:36 +01:00
Simon Glass
c910e2e2da dm: Avoid accessing uclasses before they are ready
Don't allow access to uclasses before they have been initialised.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:26 +01:00
Simon Glass
f4cdead24a dm: Allow a device to be found by its FDT offset
Each device that was bound from a device tree has an node that caused it to
be bound. Add functions that find and return a device based on a device tree
offset.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
b7d665705e dm: Display the sequence number for each device
Add this information to 'dm tree' and 'dm uclass' commands.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
5a66a8ff86 dm: Introduce device sequence numbering
In U-Boot it is pretty common to number devices from 0 and access them
on the command line using this numbering. While it may come to pass that
we will move away from this numbering, the possibility seems remote at
present.

Given that devices within a uclass will have an implied numbering, it
makes sense to build this into driver model as a core feature. The cost
is fairly small in terms of code and data space.

With each uclass having numbered devices we can ask for SPI port 0 or
serial port 1 and receive a single device.

Devices typically request a sequence number using aliases in the device
tree. These are resolved when the device is probed, to deal with conflicts.
Sequence numbers need not be sequential and holes are permitted.

At present there is no support for sequence numbers using static platform
data. It could easily be added to 'struct driver_info' if needed, but it
seems better to add features as we find a use for them, and the use of -1
to mean 'no sequence' makes the default value somewhat painful.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
4e8bc21170 dm: Avoid activating devices in 'dm uclass' command
This command currently activates devices as it lists them. This is not
desirable since it changes the system state. Fix it and avoid printing
a newline if there are no devices in a uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
fffa24d7c5 dm: Move device display into its own function
The device display for 'dm tree' and 'dm uclass' is mostly the same, so
move it into a common function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
00606d7e39 dm: Allow drivers to be marked 'before relocation'
Driver model currently only operates after relocation is complete. In this
state U-Boot typically has a small amount of memory available. In adding
support for driver model prior to relocation we must try to use as little
memory as possible.

In addition, on some machines the memory has not be inited and/or the CPU
is not running at full speed or the data cache is off. These can reduce
execution performance, so the less initialisation that is done before
relocation the better.

An immediately-obvious improvement is to only initialise drivers which are
actually going to be used before relocation. On many boards the only such
driver is a serial UART, so this provides a very large potential benefit.

Allow drivers to mark themselves as 'pre-reloc' which means that they will
be initialised prior to relocation. This can be done either with a driver
flag or with a 'dm,pre-reloc' device tree property.

To support this, the various dm scanning function now take a 'pre_reloc_only'
parameter which indicates that only drivers marked pre-reloc should be
bound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:24 +01:00
Simon Glass
7497812d47 dm: Make sure that the root device is probed
The root device should be probed just like any other device. The effect of
this is to mark the device as activated, so that it can be removed (along
with its children) if required.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2014-07-23 14:07:24 +01:00
Simon Glass
eb9ef5fee7 dm: Use an explicit expect value in core tests
Rather than reusing the 'reg' property, use an explicit property for the
expected ping value used in testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:23 +01:00
Tom Rini
ba9b42c81b Merge branch 'sandbox' of git://git.denx.de/u-boot-x86 2014-06-24 14:06:22 -04:00
Stephen Warren
4d907025d6 sandbox: restore ability to access host fs through standard commands
Commit 95fac6ab45 "sandbox: Use os functions to read host device tree"
removed the ability for get_device_and_partition() to handle the "host"
device type, and redirect accesses to it to the host filesystem. This
broke some unit tests that use this feature. So, revert that change. The
code added back by this patch is slightly different to pacify checkpatch.

However, we're then left with "host" being both:
- A pseudo device that accesses the hosts real filesystem.
- An emulated block device, which accesses "sectors" inside a file stored
  on the host.

In order to resolve this discrepancy, rename the pseudo device from host
to hostfs, and adjust the unit-tests for this change.

The "help sb" output is modified to reflect this rename, and state where
the host and hostfs devices should be used.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-06-23 15:37:23 -06:00
Simon Glass
4af5b1445c dm: Use '*' to indicate a device is activated
Make both dm enumeration commands support showing whether a driver is active
or not, and use a consistent indicator (an asterisk).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2014-06-21 10:12:43 -06:00
Simon Glass
184b1b7175 dm: Fix printf() strings in the 'dm' command
The values here are int, but the map_to_sysmem() call can return a long.
Add a cast to deal with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:56:28 -06:00
Simon Glass
b6a49a7ae7 dm: Allow driver model tests only for sandbox
The GPIO tests require the sandbox GPIO driver, so cannot be run on other
platforms. Similarly for the 'dm test' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:55:52 -06:00
Simon Glass
ae7f451308 dm: Rename struct device_id to udevice_id
It is best to avoid having any occurence of 'struct device' in driver
model, so rename to achieve this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:55:18 -06:00
Stephen Warren
967a99ad82 test: vboot: explicitly request bash
vboot_test.sh uses Bashisms. Explicitly use #!/bin/bash so the script
doesn't fail if /bin/sh isn't Bash.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:19:04 -04:00
Simon Glass
93ce7561cb Add final result tests for run_command_list()
run_command_list() is supposed to return a return code of 0 for success
and 1 for failure. Add a few simple tests that confirm this. These tests
work both with the built-in parser and hush.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-05 14:38:38 -04:00
Heiko Schocher
54c5d08a09 dm: rename device struct to udevice
using UBI and DM together leads in compiler error, as
both define a "struct device", so rename "struct device"
in include/dm/device.h to "struct udevice", as we use
linux code (MTD/UBI/UBIFS some USB code,...) and cannot
change the linux "struct device"

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
2014-05-27 10:21:32 -04:00
Heiko Schocher
29a23f9d6c tools, fit_check_sign: verify a signed fit image
add host tool "fit_check_sign" which verifies, if a fit image is
signed correct.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2014-03-21 16:40:38 -04:00
Heiko Schocher
646257d1f4 rsa: add sha256-rsa2048 algorithm
based on patch from andreas@oetken.name:

http://patchwork.ozlabs.org/patch/294318/
commit message:
I currently need support for rsa-sha256 signatures in u-boot and found out that
the code for signatures is not very generic. Thus adding of different
hash-algorithms for rsa-signatures is not easy to do without copy-pasting the
rsa-code. I attached a patch for how I think it could be better and included
support for rsa-sha256. This is a fast first shot.

aditionally work:
- removed checkpatch warnings
- removed compiler warnings
- rebased against current head

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: andreas@oetken.name
Cc: Simon Glass <sjg@chromium.org>
2014-03-21 16:39:34 -04:00
Stephen Warren
cfd13e8dda unit-test: make "test -e" test independent of $CWD
The unit-test for hush's "test -e" currently relies upon being run in
the U-Boot build directory, because it tests for the existence of a file
that exists in that directory.

Fix this by explicitly creating the file we use for the existence test,
and deleting it afterwards so that multiple successive unit-test
invocations succeed. This required adding an os.c function to erase
files.

Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-03-07 10:59:06 -05:00
Stephen Warren
fe9ca3d328 hush: fix some quoted variable expansion issues
The following shell command fails:

if test -z "$x"; then echo "zero"; else echo "non-zero"; fi

(assuming $x does not exist, it prints "non-zero" rather than "zero").

... since "$x" expands to nothing, and the argument is completely
dropped, causing too few to be passed to -z, causing cmd_test() to
error out early.

This is because when variable expansions are processed by make_string(),
the expanded results are concatenated back into a new string. However,
no quoting is applied when doing so, so any empty variables simply don't
generate any parameter when the combined string is parsed again.

Fix this by explicitly replacing quoting any argument that was originally
quoted when re-generating a string from the already-parsed argument list.

This also fixes loss of whitespace in commands such as:

setenv space " "
setenv var " 1${space}${space} 2 "
echo ">>${var}<<"

Reported-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-03-07 10:59:06 -05:00
Stephen Warren
eebd1b58d0 unit-test: clean up evironment after Hush tests
Delete the temporary variables that are used to save unit-test results
from the environment after running the test. This prevents polluting
the environment, or growing it too much.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Simon Glass <sjg@chromium.org>
2014-03-07 10:59:06 -05:00
Simon Glass
96495d90fe dm: Add GPIO support and tests
Add driver model support for GPIOs. Since existing GPIO drivers do not use
driver model, this feature must be enabled by CONFIG_DM_GPIO. After all
GPO drivers are converted over we can perhaps remove this config.

Tests are provided for the sandbox implementation, and are a sufficient
sanity check for basic operation.

The GPIO uclass understands the concept of named banks of GPIOs, with each
GPIO device providing a single bank. Within each bank the GPIOs are numbered
using an offset from 0 to n-1. For example a bank named 'b' with 20
offsets will provide GPIOs named b0 to b19.

Anonymous GPIO banks are also supported, and are just numbered without any
prefix.

Each time a GPIO driver is added to the uclass, the GPIOs are renumbered
accordinging, so there is always a global GPIO numbering order.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:30 -05:00
Simon Glass
0681195977 dm: Add a 'dm' command for testing
This command is not required for driver model operation, but can be useful
for testing. It provides simple dumps of internal data structures.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:29 -05:00
Simon Glass
2e7d35d2a6 dm: Add basic tests
Add some tests of driver model functionality. Coverage includes:

- basic init
- binding of drivers to devices using platform_data
- automatic probing of devices when referenced
- availability of platform data to devices
- lifecycle from bind to probe to remove to unbind
- renumbering within a uclass when devices are probed/removed
- calling driver-defined operations
- deactivation of drivers when removed
- memory leak across creation and destruction of drivers/uclasses
- uclass init/destroy methods
- automatic probe/remove of children/parents when needed

This function is enabled for sandbox, using CONFIG_DM_TEST.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-04 12:15:29 -05:00
Stephen Warren
f2afe70196 unit-test: add lots of tests for the Hush 'test' command
I recently re-wrote cmd_test() to add new features. Add a bunch of unit-
tests to make sure I didn't break anything.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19 09:47:34 -05:00
Stephen Warren
6748672884 unit-test: fix 'env default' invocation
"env default -f" doesn't work any more; replace it with
"env default -f -a". This avoids the following when running the ut
command:

do_ut_cmd: Testing commands
env - environment handling commands

Usage:
env default [-f] -a - [forcibly] reset default environment
...

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19 09:47:34 -05:00
Guilherme Maciel Ferreira
6496d00fb8 sandbox: dumpimage: Test dumpimage
Add a test for dumpimage.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2013-12-13 09:15:32 -05:00
Masahiro Yamada
bcfe8fdf32 dts, api, test: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-01 11:42:12 -04:00
Wolfgang Denk
93e1459641 Coding Style cleanup: replace leading SPACEs by TABs
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
2013-10-14 16:06:54 -04:00
Kees Cook
3153e915b4 sandbox: add compression tests
This adds the "test_compression" command when building the sandbox. This
tests the existing compression and decompression routines for simple
sanity and for buffer overflow conditions.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2013-09-03 13:30:05 -06:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00