Commit Graph

24 Commits

Author SHA1 Message Date
Andre Przywara
b2267e8a22 fix incorrect usage of DT node unit address in comments
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the tree where node names were mentioned in
comments, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Masahiro Yamada
76b9cbab25 tools: image: fix message when fail to add verification data for config
This function is called when signing configuration nodes.  Adjust
the error message.

I do not know why we do not need to show the error message in case of
ENOSPC.  Remove the if-conditional that seems unnecessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06 09:59:01 -05:00
Masahiro Yamada
6793d017a7 tools: image: allow to sign image nodes without -K option
If -K option is missing when you sign image nodes, it fails with
an unclear error message:

  tools/mkimage Can't add hashes to FIT blob: -1

It is hard to figure out the cause of the failure.

In contrast, when you sign configuration nodes, -K is optional because
fit_config_process_sig() returns successfully if keydest is unset.
Probably this is a preferred behavior when you want to update FIT with
the same key; you do not have to update the public key in this case.

So, this commit changes fit_image_process_sig() to continue signing
without keydest.  If ->add_verify_data() fails, show a clearer error
message, which has been borrowed from fit_config_process_sig().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06 09:59:00 -05:00
Masahiro Yamada
1d88a99d1b tools: image: fix "algo" property of public key for verified boot
The "algo_name" points to a property in a blob being edited.  The
pointer becomes stale when fit_image_write_sig() inserts signatures.
Then crypto->add_verify_data() writes wrong data to the public key
destination.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06 09:59:00 -05:00
Masahiro Yamada
16067e6b87 tools: image: fix node name of signature node in FIT
Both "conf_name" and "sig_name" point to the name of config node.
The latter should be the name of the signature node.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-23 17:28:17 -04:00
George McCollister
f1ca1fdebf mkimage: Add support for signing with pkcs11
Add support for signing with the pkcs11 engine. This allows FIT images
to be signed with keys securely stored on a smartcard, hardware security
module, etc without exposing the keys.

Support for other engines can be added in the future by modifying
rsa_engine_get_pub_key() and rsa_engine_get_priv_key() to construct
correct key_id strings.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
2017-01-14 16:47:13 -05:00
Andrew Duda
83dd98e012 image: Combine image_sig_algo with image_sign_info
Remove the need to explicitly add SHA/RSA pairings. Invalid SHA/RSA
pairings will still fail on verify operations when the hash length is
longer than the key length.

Follow the same naming scheme "checksum,crytpo" without explicitly
defining the string.

Indirectly adds support for "sha1,rsa4096" signing/verification.

Signed-off-by: Andrew Duda <aduda@meraki.com>
Signed-off-by: aduda <aduda@meraki.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21 14:07:31 -05:00
Andrew Duda
0c1d74fda7 image: Add crypto_algo struct for RSA info
Cut down on the repetition of algorithm information by defining separate
checksum and crypto structs. image_sig_algos are now simply pairs of
unique checksum and crypto algos.

Signed-off-by: Andrew Duda <aduda@meraki.com>
Signed-off-by: aduda <aduda@meraki.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21 14:07:31 -05:00
mario.six@gdsys.cc
713fb2dcb2 tools, rsa: Further minor cleanups on top of c236ebd and 2b9ec7
[NOTE: I took v1 of these patches in, and then v2 came out, this commit
is squashing the minor deltas from v1 -> v2 of updates to c236ebd and
2b9ec76 into this commit - trini]

- Added an additional NULL check, as suggested by Simon Glass to
  fit_image_process_sig
- Re-formatted the comment blocks

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
[For merging the chnages from v2 back onto v1]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-25 12:01:36 -04:00
mario.six@gdsys.cc
c236ebd2fa tools: Fix return code of fit_image_process_sig()
When signing images, we repeatedly call fit_add_file_data() with
successively increasing size values to include the keys in the DTB.

Unfortunately, if large keys are used (such as 4096 bit RSA keys), this
process fails sometimes, and mkimage needs to be called repeatedly to
integrate the keys into the DTB.

This is because fit_add_file_data actually returns the wrong error
code, and the loop terminates prematurely, instead of trying again with
a larger size value.

This patch corrects the return value and also removes a error message,
which is misleading, since we actually allow the function to fail. A
(hopefully helpful) comment is also added to explain the lack of error
message.

This is probably related to 1152a05 ("tools: Correct error handling in
fit_image_process_hash()") and the corresponding error reported here:

https://www.mail-archive.com/u-boot@lists.denx.de/msg217417.html

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-07-22 14:46:24 -04:00
Simon Glass
1152a05ee6 tools: Correct error handling in fit_image_process_hash()
We should not be returning -1 as an error code. This can mask a situation
where we run out of space adding things to the FIT. By returning the correct
error in this case (-ENOSPC) it can be handled by the higher-level code.

This may fix the error reported by Tom Van Deun here:

https://www.mail-archive.com/u-boot@lists.denx.de/msg217417.html

although I am not sure as I cannot actually repeat it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Van Deun <tom.vandeun@wapice.com>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:37 -04:00
Heiko Schocher
04a710a593 tools: fix typo in tools/image-host.c
fix a typo in error printf. If FIT_CONFS_PATH is not found
print FIT_CONFS_PATH not FIT_IMAGES_PATH.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-14 11:20:01 +02:00
Simon Glass
ce1400f694 Enhance fit_check_sign to check all images
At present this tool only checks the configuration signing. Have it also
look at each of the images in the configuration and confirm that they
verify.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de> (v1)
2014-06-19 11:19:02 -04:00
Simon Glass
597a8b2c68 mkimage: Automatically expand FDT in more cases
The original code did not cover every case and there was a missing negative
sign in one case. Expand the coverage and fix the bug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:18:56 -04:00
Simon Glass
a946811569 mkimage: Automatically make space in FDT when full
When adding hashes or signatures, the target FDT may be full. Detect this
and automatically try again after making 1KB of space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-11 16:25:46 -04:00
Heiko Schocher
29a23f9d6c tools, fit_check_sign: verify a signed fit image
add host tool "fit_check_sign" which verifies, if a fit image is
signed correct.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2014-03-21 16:40:38 -04:00
Heiko Schocher
66b36f833a tools/image-host: fix sign-images bug
property "sign-images" is never found, fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
2014-03-21 16:39:31 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Simon Glass
4d0985295b image: Add support for signing of FIT configurations
While signing images is useful, it does not provide complete protection
against several types of attack. For example, it it possible to create a
FIT with the same signed images, but with the configuration changed such
that a different one is selected (mix and match attack). It is also possible
to substitute a signed image from an older FIT version into a newer FIT
(roll-back attack).

Add support for signing of FIT configurations using the libfdt's region
support.

Please see doc/uImage.FIT/signature.txt for more information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:18:56 -04:00
Simon Glass
56518e7104 image: Support signing of images
Add support for signing images using a new signature node. The process
is handled by fdt_add_verification_data() which now takes parameters to
provide the keys and related information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:18:56 -04:00
Simon Glass
bbb467dc3c image: Rename fit_add_hashes() to fit_add_verification_data()
We intend to add signatures to FITs also, so rename this function so that
it is not specific to hashing. Also rename fit_image_set_hashes() and
make it static since it is not used outside this file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-05-14 15:37:25 -04:00
Simon Glass
b7260910dc image: Convert fit_image_hash_set_value() to static, and rename
This function doesn't need to be exported, and with verification
we want to use it for setting the 'value' property in any node,
so rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-05-14 15:37:25 -04:00
Simon Glass
94e5fa46a0 image: Split hash node processing into its own function
This function has become quite long and much of the body is indented quite
a bit. Move it into a separate function to make it easier to work with.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2013-05-14 15:37:25 -04:00
Simon Glass
604f23dde0 image: Move HOSTCC image code to tools/
This code is never compiled into U-Boot, so move it into a separate
file in tools/ to avoid the large #ifdef.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-05-14 15:37:25 -04:00