Guennadi Liakhovetski
7c0e5a8db3
smdk6400: remove redundant bootargs definition
...
Double bootargs setting leads to a duplicated environmant entry.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-08-31 00:39:47 +02:00
Guennadi Liakhovetski
11edcfe260
ARM: Add support for S3C6400 based SMDK6400 board
...
SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
driver for it too. The board can also boot from the NOR flash, but due to
hardware limitations it can only address 64KiB on it, which is not enough
for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-08-31 00:39:47 +02:00
Wolfgang Denk
ae9e1b579e
Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx
2008-08-28 00:39:27 +02:00
Heiko Schocher
258c37b147
mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-27 16:03:48 -06:00
Kumar Gala
9490a7f1a9
mpc85xx: Add support for the MPC8536DS reference board
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:54 -05:00
Kumar Gala
129ba616b3
mpc85xx: Add support for the MPC8572DS reference board
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:53 -05:00
Kumar Gala
457caecdbc
FSL DDR: Remove old SPD support from cpu/mpc85xx
...
All 85xx boards have been converted to the new code so we can
remove the old SPD DDR setup code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:53 -05:00
Kumar Gala
0e7927db13
FSL DDR: Convert STXSSA to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:53 -05:00
Kumar Gala
c360d9b970
FSL DDR: Convert STXGP3 to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:52 -05:00
Kumar Gala
8e55313b7a
FSL DDR: Convert SBC8560 to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:52 -05:00
Kumar Gala
9658bec2e8
FSL DDR: Convert MPC8540EVAL to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:52 -05:00
Kumar Gala
6bfa8f723c
FSL DDR: Convert PM856 to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:51 -05:00
Kumar Gala
d53bd3e17b
FSL DDR: Convert PM854 to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:51 -05:00
Kumar Gala
33b9079ba2
FSL DDR: Convert sbc8548 to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:51 -05:00
Kumar Gala
a947e4c7eb
FSL DDR: Convert atum8548 to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:51 -05:00
Kumar Gala
be0bd8234b
FSL DDR: Convert socrates to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:51 -05:00
Kumar Gala
1167a2fd56
FSL DDR: Convert MPC8544DS to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:50 -05:00
Jon Loeliger
e6f5b35b41
FSL DDR: Convert MPC8568MDS to new DDR code.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:50 -05:00
Jon Loeliger
e31d2c1e2b
FSL DDR: Convert MPC8548CDS to new DDR code.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:50 -05:00
Jon Loeliger
aa11d85cf3
FSL DDR: Convert MPC8541CDS to new DDR code.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:50 -05:00
Jon Loeliger
2b40edb10d
FSL DDR: Convert MPC8555ADS to new DDR code.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:49 -05:00
Jon Loeliger
8b625114e8
FSL DDR: Convert MPC8560ADS to new DDR code.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:49 -05:00
Kumar Gala
9617c8d49a
FSL DDR: Convert MPC8540ADS to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:48 -05:00
Kumar Gala
9bd4e5911b
FSL DDR: Convert SBC8641D to new DDR code.
...
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:06:04 +02:00
Jon Loeliger
39aa1a7348
FSL DDR: Convert MPC8610HPCD to new DDR code.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:06:03 +02:00
Kumar Gala
6a8e569293
FSL DDR: Convert MPC8641HPCN to new DDR code.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:06:02 +02:00
Heiko Schocher
adf22b66d8
Add support for muas3001 board (MPC8270)
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-27 01:00:43 +02:00
Wolfgang Denk
c5d11e79a2
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
2008-08-26 23:14:58 +02:00
Wolfgang Denk
51e46e28fd
ADS5121: adjust image addresses in RAM and flash
...
Use the same mapping in flash as used by Linux
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-26 15:01:28 +02:00
Andre Schwarz
1a9eeb78b8
change mvBL-M7 default env and move to vendor subdir
...
fix mvBL-M7 config and move to matrix_vision subdir
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25 17:11:20 -05:00
Ira W. Snyder
447ad5768a
MPC8349EMDS: Add PCI Agent (PCISLAVE) support
...
Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
PCI card rather than a host computer.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25 17:04:36 -05:00
Ira W. Snyder
162338e1fc
MPC8349EMDS: use 83XX_GENERIC_PCI setup code
...
Change the MPC8349EMDS board to use the generic PCI initialization code
for the mpc83xx cpu.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25 17:04:24 -05:00
Kim Phillips
ce0eb70333
Merge branch 'next'
2008-08-25 17:02:10 -05:00
Heiko Schocher
8f2b457ef2
cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
...
Commit 00b1883a4c
missed a few boards:
include/configs/M5253DEMO.h
include/configs/ml507.h
include/configs/redwood.h
This patch fixes this.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-21 02:02:28 +02:00
Axel Beierlein
bef92e215d
Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
...
Tested with TQM5200S on STK52XX.200 Board
Signed-off-by: Axel Beierlein <belatronix@web.de>
2008-08-21 01:39:24 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0de0afbca8
coldfire: fix CFI drivers activation with new macro
...
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-21 01:10:52 +02:00
Haavard Skinnemoen
4926714041
hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
...
CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20 09:40:16 +02:00
Haavard Skinnemoen
d3c23a790f
Merge branch 'next' of git://git.denx.de/u-boot-avr32
...
Conflicts:
MAINTAINERS
2008-08-20 09:37:09 +02:00
Haavard Skinnemoen
33eac2b3d9
hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
...
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20 09:28:36 +02:00
Haavard Skinnemoen
25da0b8419
favr-32-ezkit: Fix printf format warnings
...
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20 09:27:37 +02:00
Haavard Skinnemoen
7321d7e7b6
Merge branch 'mimc200' of git://git.denx.de/u-boot-avr32
...
Conflicts:
MAKEALL
Makefile
2008-08-20 09:12:28 +02:00
Mark Jackson
13b50fe3bc
avr32: Add MIMC200 board
...
The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
8MByte FLASH and 128KByte FRAM.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20 09:10:31 +02:00
TsiChung Liew
4cb4e654ca
ColdFire: Multiple fixes for M5282EVB
...
Incorrect CFG_HZ value, change 1000000 to 1000.
Rename #waring to #warning. RAMBAR1 uses twice
in start.S, rename the later to FLASHBAR. Insert
nop for DRAM setup. And, env_offset in linker file.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:56 -06:00
TsiChung Liew
05316f8ece
ColdFire: Add M54451EVB platform support for MCF5445x
...
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:56 -06:00
TsiChung Liew
922cd75155
ColdFire: Add Serial Flash support for M54455EVB
...
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:56 -06:00
TsiChung Liew
9f75155145
ColdFire: Implement SBF feature for M5445EVB
...
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:55 -06:00
TsiChung Liew
a7323bba22
ColdFire: Add SSPI feature for MCF5445x
...
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:55 -06:00
TsiChung Liew
b2d022d1ac
ColdFire: Use CFI Flash driver for M54455EVB
...
Remove non-common flash driver in
board/freescale/m54455evb/flash.c. The non-cfi flash will
use CONFIG_FLASH_CFI_LEGACY to configure the flash
attribute.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:30:10 -06:00
TsiChung Liew
6d33c6acfa
ColdFire: Add M5253DEMO platform support for MCF5253
...
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:30:10 -06:00
TsiChung Liew
80ba61fd82
ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
...
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:30:10 -06:00