Commit Graph

118 Commits

Author SHA1 Message Date
Marian Balakowicz
75d3e8fbd9 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
New uImage format (Flattened Image Tree) requires libfdt
functionality, print out error message if CONFIG_OF_LIBFDT
is not defined.

New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
This commit turns it on by default.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:20:18 +01:00
Wolfgang Denk
e7670f6c1e PPC: Use r2 instead of r29 as global data pointer
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.

Use r2 instead.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-14 22:43:22 +01:00
Oliver Weber
2ad4d3999f MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
Signed-off-by: Oliver Weber <almoeli@gmx.de>
2008-01-12 21:19:01 +01:00
Wolfgang Denk
64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
Heiko Schocher
6341d9d723 added basic support for the MUNICes board.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-01-12 00:41:22 +01:00
Kumar Gala
e93becf80d Move do_fixup* for libfdt into common code
Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
into common/fdt_support.c and renamed:

do_fixup()	-> do_fixup_by_path()
do_fixup_u32() 	-> do_fixup_by_path_u32()

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-21 14:01:49 -06:00
Grant Likely
e15633888a Revert "Correct fixup relocation for MPC5xxx"
This reverts commit 6f7576b20e.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 08:31:22 -07:00
Grant Likely
cf2817a84c Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200

Tested on: lite5200b

Note: the fixup functions have not been moved to a common place.  This
patch is targeted for immediate merging as in solves a build issue, but
the final name/location of the fixups is still subject to debate.  I
propose to merge this now, and move the fixups in the next merge window
to be usable by all targets.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-09-06 09:46:23 -06:00
Martin Krause
4a8527ef08 MPC5xxx: fix some compiler warnings in USB code
Fix the following warnings:
- usb.c:xx: warning: function declaration isn't a prototype
- usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
  from pointer wihtout a cast

Signed-off-by: Martin Krause <martin.krase@tqs.de>
2007-08-29 02:09:58 +02:00
Wolfgang Denk
6af2eeb1e9 Minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-29 01:32:05 +02:00
Heiko Schocher
a861558c65 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-08-28 17:40:33 +02:00
Markus Klotzbuecher
78549bbf44 Merge with git://www.denx.de/git/u-boot.git 2007-08-07 22:30:29 +02:00
Wolfgang Denk
b23b547597 Merge with /home/tur/git/u-boot#cm5200-si 2007-08-07 17:04:30 +02:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Bartlomiej Sieka
86b116b1b1 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
Add the ability for modules from the Schindler cm5200 family to use a
single U-Boot image:
- rename cm1_qp1 to cm5200
- add run-time module detection
- parametrize SDRAM configuration according to the module we are running on

Few minor, board-specific fixes included in this patch:
- better MAC address handling
- updated default environment ('update' command uses +{filesize} now)
- improved error messages in the auto-update code
- allow booting U-Boot from RAM (CFG_RAMBOOT)

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-08-03 12:08:16 +02:00
Bartlomiej Sieka
fa1df30892 CM1.QP1: Support for the Schindler CM1.QP1 board.
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-07-11 20:11:07 +02:00
Jon Loeliger
068b60a0eb cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 10:27:39 -05:00
Jon Loeliger
4431283c7e cpu/m*: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 19:06:00 -05:00
Grant Likely
6f7576b20e Correct fixup relocation for MPC5xxx
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:07:40 +02:00
Grant Likely
d181c9a15c Consolidate mpc5xxx linker scripts
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 00:59:41 +02:00
Jon Loeliger
f48070fe5f cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:23:18 +02:00
Rafal Jaworowski
02032e8f14 [ppc] Fix build breakage for all non-4xx PowerPC variants.
- adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
- minor 4xx cleanup
2007-06-22 14:58:04 +02:00
Markus Klotzbuecher
72657570b6 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config 2007-06-06 11:49:43 +02:00
Markus Klotzbuecher
51d8e81322 Merge git://www.denx.de/git/u-boot into 2007_05_15-testing 2007-05-29 16:37:57 +02:00
Wolfgang Denk
19bf91f962 Merge with /home/tur/git/u-boot#motionpro 2007-05-28 01:11:11 +02:00
Bartlomiej Sieka
c00125e07c MPC5XXX, Motion-PRO: Fix PHY initialization problem.
After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
networking does not function. This commit switches PHY to TX mode by clearing
the FX_SEL bit of Mode Control Register. It also reverses commit
008861a2f3, i.e., a temporary workaround.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:58:45 +02:00
Bartlomiej Sieka
c99512d6bd MPC5xxx: Change names of defines related to IPB and PCI clocks.
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:53:43 +02:00
Wolfgang Denk
f0da1d1b3c Merge with /home/tur/git/u-boot#motionpro 2007-05-15 00:22:30 +02:00
Bartlomiej Sieka
008861a2f3 [MPC5xxx] There are networking problems on the Motion-PRO board with
current PHY initalization code (tftp timeouts all the time). This commit
temporarily disables PHY initalization sequence to make the networking
operational, until a fix is found.
2007-05-07 22:36:15 +02:00
Markus Klotzbuecher
6ede0c8b69 Merge with git://www.denx.de/git/u-boot.git 2007-05-07 14:10:38 +02:00
Timur Tabi
ac4cd59d59 5xxx: write MAC address to mac-address and local-mac-address
Some device trees have a mac-address property, some have local-mac-address,
and some have both.  To support all of these device trees, ftp_cpu_setup()
should write the MAC address to mac-address and local-mac-address, if they
exist.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2007-05-05 21:35:59 +02:00
Grzegorz Wianecki
a9d87e2707 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
message. Use PVR to distinguish between the two variants, and print proper CPU
information.

Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-05-05 21:35:03 +02:00
Markus Klotzbuecher
61ea75aa07 Merge with git://www.denx.de/git/u-boot.git 2007-04-23 13:17:22 +02:00
Heiko Schocher
37403005cf [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
clear the Display after reset.

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-04-14 05:26:48 +02:00
Markus Klotzbuecher
f2b07ebd32 Merge with git://www.denx.de/git/u-boot.git#testing-USB 2007-03-23 09:52:17 +01:00
Wolfgang Denk
dd0321f5f8 Merge with /home/hs/jupiter/u-boot 2007-03-08 21:45:04 +01:00
Heiko Schocher
2605e90bf6 [PATCH] Added support for the jupiter board.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-02-16 07:57:42 +01:00
Bartlomiej Sieka
53d4a4983f [Motion-PRO] Preliminary support for the Motion-PRO board. 2007-02-09 10:45:42 +01:00
Heiko Schocher
6dedf3d49d [PATCH] Add support for the UC101 board from MAN.
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-12-21 16:14:48 +01:00
Grant Likely
726e90aacf [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
not the XLB frequency.

This patch depends on the previous patches for MPC52xx device tree support

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2006-11-29 16:23:42 +01:00
Stefan Roese
e59581c56a [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
This patch adds the code and configuration necessary to boot with an
arch/powerpc Linux kernel.

Signed-off-by: Grant Likely <grant.likely@gmail.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-28 17:55:49 +01:00
Wolfgang Denk
83dc830b16 Merge with /home/mk/git/u-boot-generic_ohci#generic_ohci 2006-11-27 16:52:20 +01:00
Markus Klotzbuecher
53e336e9ff Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
and adapted board configs TQM5200 and yosemite accordingly. This commit
also makes the maximum number of root hub ports configurable 
(CFG_USB_OHCI_MAX_ROOT_PORTS).
2006-11-27 11:43:09 +01:00
Wolfgang Denk
82165a334b Merge with /home/tur/proj/051_uboot_linux_v38b/u-boot 2006-10-18 22:27:57 +02:00
Bartlomiej Sieka
4707fb50cc Preliminary patch adding support for the MarelV38B board. 2006-10-13 21:09:09 +02:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Wolfgang Denk
511d0c72b8 Coding style cleanup 2006-10-09 00:42:01 +02:00
Wolfgang Denk
6741ae92f3 Merge with /home/m8/git/u-boot 2006-09-04 01:03:57 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Detlev Zundel
43835aac48 Added interrupt handling capabilities for mpc5xxx processors.
Also added Linux like BUG() macros.
2006-09-01 11:59:23 +02:00