Commit Graph

43 Commits

Author SHA1 Message Date
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Ian Campbell
64a0c24726 pxe: Ensure we don't overflow bootargs
On a couple of platforms I've tripped over long PXE append lines overflowing
this array, due to having CONFIG_SYS_CBSIZE == 256. When doing preseeded Debian
installs it's pretty trivial to exceed that.

Since the symptom can be a silent hang or a crash add a check. Of course the
affected boards would also need an increased CBSIZE to actually work.

Note that due to the printing of the final bootargs string CONFIG_SYS_PBSIZE
also needs to be sufficiently large.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[trini: Use %zd not %d in printf for all args]
Signed-off-by: Tom Rini <trini@ti.com>
2014-10-10 09:44:21 -04:00
Hans de Goede
b1ba62d4ae pxe: Allow use of environment variables in append string
Use cli_simple_process_macros, so that environment
variables (e.g. ${console}) can be used in append strings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-08-21 12:01:13 -04:00
Bryan Wu
1fb7d0e619 pxe: detect image format before calling bootm/bootz
Trying bootm for zImage will print out several error message which
is not necessary for this case. So detect image format firstly, only
try bootm for legacy and FIT format image then try bootz for others.

This patch needs new function genimg_get_kernel_addr().

Signed-off-by: Bryan Wu <pengw@nvidia.com>
2014-08-09 11:19:01 -04:00
Stephen Warren
ded2e20ef2 pxe: clear Bootfile before returning
When "pxe boot" downloads the initrd/kernel/DTB, netboot_common() saves
the downloaded filename to global variable BootFile. If the boot
operation is aborted, this global state is not cleared. If "dhcp" is
executed later without any arguments, BootFile is not cleared, and when
the DHCP response is received, BootpCopyNetParams() writes the value into
environment variable bootfile.

This causes the following scenario:

* Boot script executes dhcp; pxe get; pxe boot

* User CTRL-C's the PXE menu, which causes the first menu item to be
  booted, which causes some file to be downloaded.

  (This boot-on-CTRL-C behaviour is arguably a bug too, but it's a
  separate bug and the bug this patch fixes would still exist if the user
  simply waited to press CTRL-C until "pxe boot" started downloading
  files)

* User CTRL-C's the file downloads, but the filename is still written to
  the bootfile environment variable.

* User re-runs the boot command, which in my case executes "dhcp; pxe get;
  pxe boot" again, and "dhcp" picks up the saved bootfile environment
  variable and proceeds to download a file that it shouldn't.

To solve this, modify the implementation of "pxe get" to clear BootFile
if the whole boot operation fails, which avoids this whole mess.

An alternative would be to modify netboot_common() such that the no-
arguments case explicitly clears the global variable BootFile. However,
that would prevent the following command sequences from working:

$ dhcp filename # downloads "filename"
$ dhcp          # downloads $bootfile, i.e. "filename"

or:
$ setenv bootfile filename
$ dhcp          # downloads $bootfile, i.e. "filename"

... and I assume someone relies on U-Boot working that way.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2014-08-09 11:17:02 -04:00
Jeroen Hofstee
0e350f81e1 common: commands: make commands static
Since most commands are not public, make them static. This
prevents warnings that no common prototype is available.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18 17:53:23 -04:00
Tom Rini
eeb72e6761 Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	arch/arm/cpu/armv7/config.mk
	board/ti/am43xx/mux.c
	include/configs/am43xx_evm.h

Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26 16:49:58 -05:00
Stephen Warren
e22361af07 pxe: prepend fdtdir to DTB name irrespective of source
The directory name from an fdtdir directive in a PXE config file should
always be pre-pended to the DTB filename; it shouldn't matter whether
the DTB filename came from the $fdtfile environment variable, or whether
it was constructed dynamically from ${soc}-${board}.dtb. Fix the code to
always prepend the directory name.

Reported-by: Dennis Gilmore <dennis@ausil.us>
Fixes: c61d94d860 ("pxe: implement fdtdir extlinux.conf tag")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Dennis Gilmore <dennis@ausil.us>
Tested-by: Dennis Gilmore <dennis@ausil.us>
2014-02-21 11:06:13 -05:00
Stephen Warren
b81fdb0486 pxe: allow compilation when !defined(CONFIG_CMD_NET)
pxe.c provides both the "pxe" command which relies on a network, and the
"sysboot" command which doesn't. Fix the file to compile when network
support isn't enabled. This is useful e.g. on the Raspberry Pi which has
no network support yet, but will soon support the sysboot command.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-02-21 15:30:05 +01:00
Dennis Gilmore
6d1a3e5fa1 cmd_pxe.c add any option for filesystem with sysboot uses generic load
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2014-02-04 17:29:36 -05:00
Stephen Warren
c61d94d860 pxe: implement fdtdir extlinux.conf tag
People who write (or scripts that auto-generate) extlinux.conf don't
want to know about HW-specific information such as FDT filenames. Create
a new extlinux.conf tag "fdtdir" that specifies only the directory where
FDT files are located, and defer all knowledge of the filename to U-Boot.
The algorithm implemented is:

==========
if $fdt_addr_r is set:
  if "fdt" tag was specified in extlinux.conf:
    load the FDT from the filename in the tag
  else if "fdtdir" tag was specified in extlinux.conf:
    if "fdtfile" is set in the environment:
      load the FDT from filename in "$fdtfile"
    else:
      load the FDT from some automatically generated filename

if no FDT file was loaded, and $fdtaddr is set:
  # This indicates an FDT packaged with firmware
  use the FDT at $fdtaddr
==========

A small part of an example /boot/extlinux.conf might be:

==========
LABEL primary
        LINUX zImage
        FDTDIR ./

LABEL failsafe
        LINUX bkp/zImage
        FDTDIR bkp/
==========

... with /boot/tegra20-seaboard.dtb or /boot/bkp/tegra20-seaboard.dtb
being loaded by the sysboot/pxe code.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-04 11:51:18 -05:00
Stephen Warren
f43c401b72 pxe: support "devicetree" tag
The specification for extlinux.conf[1] states that "fdt" is an alias for
"devicetree". To date, U-Boot only implements "fdt". Rectify that.

[1] http://freedesktop.org/wiki/Specifications/BootLoaderSpec/

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-04 11:51:18 -05:00
David Feng
5cea95cb53 cmd_pxe: remove compiling warnings
Signed-off-by: David Feng <fenghua@phytium.com.cn>
2014-01-09 16:08:11 +01:00
Rob Herring
e5a9a4076f pxe: fix handling of absolute paths
pxelinux and syslinux differ in their handling of absolute paths in menu
files. A pxelinux path is aways prepended with the bootfile path while
syslinux allows for absolute paths. u-boot was always treating a leading
/ as an absolute path breaking some pxelinux setups. Fix this by adding
a flag to distinguish pxelinux vs. syslinux behavior.

Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-11-04 11:24:22 -05:00
Steven Falco
0e3f3f8a3d Prevent null pointer dereference originating in cmd_pxe.c
Pass a valid cmdtp into do_tftpb(), do_ext2load(), and do_get_fat(), to
avoid possible crashes due to null pointer dereferencing.

Commit d7884e047d does not go far enough.
There is still at least one call chain that can result in a crash.

The do_tftpb(), do_ext2load(), and do_get_fat() functions expect a valid
cmdtp.  Passing in NULL is particularly bad in the do_tftpb() case,
because eventually boot_get_kernel() will be called with a NULL cmdtp:

do_tftpb() -> netboot_common() -> bootm_maybe_autostart() -> do_bootm()
-> do_bootm_states() -> bootm_find_os() -> boot_get_kernel()

Around line 991 in cmd_bootm.c, boot_get_kernel() will dereference the
null pointer, and the board will crash.

Signed-off-by: Steven A. Falco <stevenfalco@gmail.com>
2013-10-14 16:49:20 -04:00
Tom Rini
d7884e047d cmd_pxe.c: Pass along 'cmdtp' to do_bootm()/do_bootz()
When we call do_bootm() with a vmlinuz, this would lead to a NULL
pointer dereference, and after talking with Wolfgang the right thing to
do here for now is to make sure that we pass cmdtp to these functions
rather than NULL.

Reported-by: Steven A. Falco <stevenfalco@gmail.com>
Signed-off-by: Tom Rini <trini@ti.com>
2013-09-24 09:05:08 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Rob Herring
98f646764d pxe: add ipappend support
Add ipappend support to pass network device information to the kernel.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:10:14 -05:00
Joe Hershberger
58d9ff936f net: Fix build regression in cmd_pxe.c
Not all boards define an SOC.  As a result, we can't depend on that.

This was introduced in 39f985536d

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-06-24 19:10:03 -05:00
Rob Herring
39f985536d pxe: add support for per arch and SoC default paths
A pxelinux server setup for "default" menu is typically an x86 binary.
This does not work well with a mixed architecture setup. Extend the default
search to look for default-<arch>-<soc> and then default-<arch> before
falling back to just "default".

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:34 -05:00
Rob Herring
8577fec976 pxe: add support for ontimeout token
ontimeout is similar to default, but is the selection on menu timeout.
This is how cobbler sets a default. The label default is supposed to be
the default selection when <enter> is pressed. If both default and
ontimeout are set, last one parsed wins.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:34 -05:00
Rob Herring
32d2ffe731 pxe: simplify menu display and selection
Menus with lots of entries and long append lines are hard to read.
Just show a numbered list using the label or name and make the choice
by entering the number.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:34 -05:00
Rob Herring
e82eeb5709 pxe: always display a menu when present
The prompt flag is for displaying a "boot:" prompt in pxelinux. This
doesn't make sense for u-boot as we don't support the pxelinux command
interface. So we should just ignore prompt statements and always show the
menu if a menu is present.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:34 -05:00
Rob Herring
e6b6ccf203 pxe: try bootz if bootm fails to find a valid image
Standard pxelinux servers will typically use a zImage rather than u-boot
image format, so fallback to bootz if bootm fails.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:34 -05:00
Rob Herring
500f304b6b pxe: fix handling of different localboot values
Add support for value of -1 For localboot. A value of -1 means return to
u-boot prompt.

The localboot value is often 0, so we need to distinguish the value from
localboot being selected. A value of greater than or equal to 0 means
attempt local boot command.

If localboot is selected, we don't want to try other entries.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:33 -05:00
Rob Herring
23b7194e61 pxe: make string parameters const
Convert a bunch of string parameters to be const.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:33 -05:00
Rob Herring
ef034c9d70 pxe: Use ethact setting for pxe
Get the MAC address using eth_getenv_enetaddr_by_index so that the MAC
address of ethact is used. This enables using the a NIC other than the
first one for PXE boot.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:32 -05:00
Pali Rohár
fc9d64ffcd menu: Add support for user defined item choice function
Selecting menu items is currently done in menu_interactive_choice()
by reading the user input strings from standard input.

Extend menu_interactive_choice() to support user defined function
for selecting menu items. This function and its argument can be
specified when creating the menu.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-03-29 09:35:33 +01:00
Chander Kashyap
a655938a93 PXE: FDT: Add support for fdt in PXE
Now DT support is becoming common for all new SoC's. Hence it is better
to have option for getting specific FDT from the remote server.

This patch adds support for new label i.e. 'fdt'. This will allow to
retrieve 'fdt blob' from the remote server. This patch take care for
the following scenarios.

The usage of fdt is optional.
The 'fdt blob' can be retrieved from tftp or can be available locally
or can be absent.

If 'fdt_addr_r' environment variable is set and 'fdt' label is defined
retrieve 'fdt blob' from tftp. 'fdt_addr_r' is then passed along bootm
command.

If 'fdt_addr' is set and 'fdt blob' is not retrieved from the tftp pass
'fdt_addr' to bootm command. In this case 'fdt blob' will be available
at 'fdt_addr'.

If 'fdt_addr' is not set and 'fdt blob' is not retrieve from tftp pass
NULL to boot command. In this case 'fdt blob' is not required and absent.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Jason Hobbs <jason.hobbs@calxeda.com>
2012-09-27 12:22:11 -05:00
Simon Glass
d51004a832 Add run_command_list() to run a list of commands
This new function runs a list of commands separated by semicolon or newline.
We move this out of cmd_source so that it can be used by other code. The
PXE code also uses the new function.

Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-08-09 22:06:03 +02:00
Wolfgang Denk
3fe63839f3 Minor Coding Style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-10 09:18:33 +02:00
Rob Herring
669df7e42d pxe: add support for parsing local syslinux files
Add a new command "sysboot" which parses syslinux menu files and boots
using kernel and initrd specified by menu files. The operation is similar
to "pxe boot" except local files on ext2 or fat filesystem are parsed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-06-21 22:35:56 +02:00
Rob Herring
34bd23e42f pxe: parse initrd file from append string
For syslinux, the initrd can be set in the append string as
"initrd=<file>", so try to find it there if we haven't already set the
initrd.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-06-21 22:35:34 +02:00
Rob Herring
90ba7d7c44 pxe: support absolute paths
If the file path starts with a '/', then don't pre-pend the bootfile path.
This fixes a problem with running 'pxe boot' multiple times where the
bootfile path gets pre-pended to itself each time.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-06-21 22:35:15 +02:00
Rob Herring
beb9f6c678 pxe: support linux entries for labels
Kernels can be specified using "linux" or "kernel" entry. The difference
is kernel is supposed to detect the type of file, but for u-boot both are
treated the same.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-06-21 22:35:00 +02:00
Rob Herring
7815c4e89f pxe: add support for label menu text
Use a menu string if present, otherwise use the kernel string.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-06-21 22:34:45 +02:00
Rob Herring
1e08522699 pxe: support include files at top-level
Include files outside of a menu were not getting included and parsed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-06-21 22:34:26 +02:00
Jason Hobbs
834c9384a4 cmd_pxe.c: fix strict-aliasing warnings
Without this patch, some versions of gcc (at least ELDK 4.2) complain
about dereferencing type-punned pointers.

Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2012-03-27 15:17:32 +02:00
Simon Glass
4c12eeb8b5 Convert cmd_usage() calls in common to use a return value
Change all files in common/ to use CMD_RET_USAGE instead of calling
cmd_usage() directly. I'm not completely sure about this patch since
the code since impact is small (100 byte or so on ARM) and it might
need splitting into smaller patches. But for now here it is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-06 21:09:46 +01:00
Simon Glass
009dde1955 Rename run_command2() to run_command()
This is a more sensible name, so rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-06 21:09:22 +01:00
Heiko Schocher
43d4a5e687 common/cmd_pxe.c: Fix GCC 4.6 build warnings
Fix:
cmd_pxe.c: In function 'parse_pxefile_top':
cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this
  function [-Wuninitialized]
cmd_pxe.c:921:6: note: 'err' was declared here

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Jason Hobbs <jason.hobbs@calxeda.com>
Acked-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-12-20 22:28:51 +01:00
Jason Hobbs
6f40f2749a pxe: make the first label the implicit default
If no default label is specified, but a situation arises where the
default label should be used, treat the first label specified as the
default label.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
Cc: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
Cc: Wolfgang Denk <wd@denx.de>
2011-12-06 21:21:42 +01:00
Jason Hobbs
06283a6401 Add pxe command
Add pxe command, which is intended to mimic PXELINUX functionality.
'pxe get' uses tftp to retrieve a file based on UUID, MAC address or IP
address. 'pxe boot' interprets the contents of PXELINUX config like file
to boot using a specific initrd, kernel and kernel command line.

This patch also adds a README.pxe file - see it for more details on the
pxe command.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17 22:25:35 +02:00