Commit Graph

234 Commits

Author SHA1 Message Date
Yuri Tikhonov
46bc0a9387 Fix backlight in the lwmon5 POST.
Backlight was switched on even when temperature was too low.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:24:48 +01:00
Yuri Tikhonov
f694e32f93 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:24:48 +01:00
Yuri Tikhonov
b428f6a8c6 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:24:48 +01:00
Yuri Tikhonov
8f15d4addd The patch adds new POST tests for the Lwmon5 board. These are:
* External Watchdog test;
* dsPIC tests;
* FPGA test;
* GDC test;
* Sysmon tests.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:24:47 +01:00
Yuri Tikhonov
c2ed33efbf Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
2008-03-18 22:24:47 +01:00
Yuri Tikhonov
3a5d1e7f13 lwmon5: Fix register test logic to match the specific GDC h/w.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:05:37 +01:00
Yuri Tikhonov
0f855a1f05 Fix backlight in the lwmon5 POST.
Backlight was switcehd on even when temperature was too low.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:04:06 +01:00
Yuri Tikhonov
603f194e5a Some fixes to dspic, fpga, and gdc post tests for lwmon5.
Disable external watch-dog for now.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 21:59:23 +01:00
Yuri Tikhonov
e262efe357 The patch introduces the CRITICAL feature of POST tests. If the test
marked as POST_CRITICAL fails then the alternative, post_critical,
boot-command is used. If this command is not defined then U-Boot
enters into interactive mode.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 21:59:23 +01:00
Yuri Tikhonov
65b20dcefc The patch adds new POST tests for the Lwmon5 board.
These are:

* External Watchdog test;
* dsPIC tests;
* FPGA test;
* GDC test;
* Sysmon tests.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 21:59:23 +01:00
Yuri Tikhonov
8dc3b2303d Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
2008-03-18 21:59:23 +01:00
Stefan Roese
84a999b6cd ppc4xx: program_tlb now uses 64bit physical addess
This patch changes the physical addess parameter from 32bit to 64bit.
This is needed for 36bit 4xx platforms to access areas located
beyond the 4GB border, like SoC peripherals (EBC etc.).

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:03 +01:00
Anatolij Gustschin
44b4dbed41 Fix warnings while compilation of post/drivers/memory.c
Fix warnings while compilation with new gcc in eldk-4.2

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-03-02 21:42:20 +01:00
Anatolij Gustschin
60ec654c5e POST: Disable cache while SPR POST
Currently (since commit b2e2142c) u-boot crashes on
sequoia board while SPR test if CONFIG_4xx_DCACHE is
enabled. This patch disables the cache while SPR test.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-03-02 21:33:51 +01:00
Yuri Tikhonov
928d1d77f8 Fix CPU POST test failure
The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
This patch just saves the CR value before running the test code, so allowing
it to do anything it wants with CR.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Acked-by: Yuri Tikhonov <yur@emcraft.com>
--
2008-02-21 11:25:47 +01:00
Larry Johnson
8dafa87476 Add attribute POST_PREREL to ECC memory POST
Signed-off-by: Larry Johnson <lrj@acm.org>
2008-02-07 00:22:59 +01:00
Larry Johnson
4b3cc6ece9 ppc4xx: Refactor ECC POST for AMCC Denali core
The ECC POST reported intermittent failures running after power-up on
the Korat PPC440EPx board.  Even when the test passed, the debugging
output occasionally reported additional unexpected ECC errors.

This refactoring has three main objectives: (1) minimize the code
executed with ECC enabled during the tests, (2) add more checking of the
results so any unexpected ECC errors would cause the test to fail, and
(3) use synchronization (only) where required by the processor.

Signed-off-by: Larry Johnson <lrj@acm.org>
2008-01-16 11:23:33 +01:00
Niklaus Giger
17bef68097 ppc_4xx: Fix post spr.c for PPC405
post/cpu/ppc4xx/spr.c contained a few checks for registers only present
for PPC440 and derivates processor.

Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2008-01-14 15:52:52 +01:00
Stefan Roese
b2e2142c50 POST: Execute SPR test after relocation
On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
self modifying code and this doesn't work with stack in d-cache, since
I can't move the code from d-cache to i-cache. We move the SPR test to
be executed a little later, after relocation. Then stack is located in
SDRAM and this self-modifying code is no problem anymore.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-01-09 10:38:58 +01:00
Larry Johnson
0d9cdeac1d Cosmetic changes to ECC POST for AMCC Denali core
Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 19:35:35 +01:00
Stefan Roese
2e583d6c81 ppc4xx: Fix compilation problem in 405 cache POST test
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27 19:35:35 +01:00
Stefan Roese
d91722102c ppc4xx: Fix problem in 44x cache POST routine
As repoted by Larry Johnson, running "diag run cache" caused a crash
in U-Boot. This problem was introduced by a patch that removed the
TLB entry for the cache test after the test has completed. Since this
TLB was only setup once, a 2nd attempt to run this cache test
failed with a crash. Now this TLB entry is created every time the
routine is called.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27 19:35:34 +01:00
Stefan Roese
7812bc4a2e ppc4xx: Fix lwmon5 compilation problem
Now that the 440EPx ECC test is not board specific anymore
remove this Makefile.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27 19:35:34 +01:00
Larry Johnson
a724a9b40c Fix/enhance ECC POST for 440EPx/GRx
This patch allows the ECC POST to be used for different boards with the
PPC440 Denali SDRAM controller.  Modifications include skipping the test
if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
to prevent timing errors.

Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 19:35:33 +01:00
Larry Johnson
454a6cf8d4 PPC4xx: Move/rename ECC POST for 440EPx/GRx
Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 19:35:33 +01:00
Matthias Fuchs
c29d2d3680 ppc4xx: use correct io accessors for 4xx ethernet POST
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-12-27 19:35:33 +01:00
Stefan Roese
3db93b8bed ppc4xx: Enable CPU POST test for 4xx with dcache enabled
Now with caches enabled (i- and d-cache) on 44x, we need a chance to
disable the cache for the CPU POST tests, since these tests consist
of self modifying code. This is done via the new change_tlb() function.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:21:47 +01:00
Stefan Roese
f71b2888b4 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
This patch enables the 4xx EMAC POST driver to work too, when dcache is
enabled.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:21:47 +01:00
Stefan Roese
a268590406 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:21:47 +01:00
Stefan Roese
06713773da ppc4xx: Remove compiler warning from previous commit
Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:21:46 +01:00
Stefan Roese
6fa397df67 ppc4xx: Remove temporary TLB entry in POST cache test
Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:21:46 +01:00
Stefan Roese
7d47cee2cc ppc4xx: Fix POST ethernet test for Haleakala
The POST ethernet test needed to be changed to dynamically determine
the count of ethernet devices. This code is cloned from the 4xx
ethernet driver.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:20:51 +01:00
Stefan Roese
a424a8bb29 POST: Add 405EX support to 4xx UART POST test
Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:20:49 +01:00
Yuri Tikhonov
9c02defc29 POST: limit memory test area to not touch global data anymore
As experienced on lwmon5, on some boards the POST memory test can
corrupt the global data buffer (bd). This patch fixes this issue
by checking and limiting this area.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-25 05:07:16 +02:00
Stefan Roese
4ce846ec59 POST: Fix merge problem
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-14 15:12:01 +02:00
Stefan Roese
34886bbea2 Merge with /home/stefan/git/u-boot/zeus 2007-08-14 15:00:42 +02:00
Stefan Roese
c5a172a5fd POST: Add option for external ethernet loopback test
When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
is not done using an internal loopback connection, but by assuming
that an external loopback connector is plugged into the board.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-14 14:41:55 +02:00
Stefan Roese
eb2b4010ae POST: Add ppc405 support to cache and UART POST
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-14 14:39:44 +02:00
Yuri Tikhonov
29cb25da56 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
The patch adds support for UART POST on ppc44x-based boards with no
external serial clocks installed.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 08:25:22 +02:00
Stefan Roese
ea9f6bce38 ppc4xx: Update 440EPx lwmon5 board support
- Clear ECC status regs after ECC POST test
- Set dcbz for ECC generation with caches enabled as default
- Code cleanup

Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-31 08:37:01 +02:00
Pavel Kolesnikov
531e3e8b83 POST: Add ECC POST for the lwmon5 board
This patch adds ECC Post test for the Lwmon5 board based
on PPC440EPx to U-Boot.

Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
Acked-by: Yuri Tikhonov <yur@emcraft.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-07-20 15:03:03 +02:00
Heiko Schocher
fad6340715 make show_boot_progress () weak.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-13 09:54:17 +02:00
Wolfgang Denk
4ef218f6fd Coding style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-10 00:01:28 +02:00
Sergei Poselenov
b44896215a Merged POST framework with the current TOT.
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2007-07-05 08:17:37 +02:00
Igor Lisitsin
a11e06965e Extend POST support for PPC440
Added memory, CPU, UART, I2C and SPR POST tests for PPC440.

Signed-off-by: Igor Lisitsin <igor@emcraft.com>
--
2007-06-22 23:21:01 +02:00
Wolfgang Denk
389b6bb50f Remove obsoleted POST files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-03-19 13:10:08 +01:00
Wolfgang Denk
ad5bb451ad Restructure POST directory to support of other CPUs, boards, etc. 2007-03-06 18:08:43 +01:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Wolfgang Denk
d87080b721 GCC-4.x fixes: clean up global data pointer initialization for all boards. 2006-03-31 18:32:53 +02:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Wolfgang Denk
15f36a5efd Fix sysmon POST problem: check I2C error codes
This fixes a problem of displaying bogus voltages when the voltages
are so low that the I2C devices start failing while the rest of the
system keeps running.
2005-07-28 10:42:26 +02:00
wdenk
51152c173d Fix watchdog reset problems on LWMON board 2005-06-05 20:30:43 +00:00
wdenk
eedcd078fe * Patch by Detlev Zundel, 08 Sep 2004:
Update etags build target

* Improve NetConsole support: add support for broadcast destination
  address and buffered input.

* Cleanup compiler warnings for GCC 3.3.x and later

* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
2004-09-08 22:03:11 +00:00
wdenk
281e00a3be * Code cleanup
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
wdenk
79fa88f3ed Patch by Pantelis Antoniou, 5 May 2004:
- Intracom board update.
- Add Codec POST.
2004-06-07 23:46:25 +00:00
wdenk
5a8c51cd5e * Patches by Pantelis Antoniou, 30 Mar 2004:
- add support for the Epson 156x series of graphical displays
    (These displays are serial and not suitable for using a normal
    framebuffer console on them)
  - add infrastructure needed in order to POST any DSPs in a board
2004-04-15 21:16:42 +00:00
wdenk
7d7ce4125f Patch by Pierre Aubert, 15 Mar 2004:
Fix buffer overflow in IDE identification
2004-03-17 01:13:07 +00:00
wdenk
63e73c9a8e * Patches by Reinhard Meyer, 14 Feb 2004:
- update board/emk tree; use common flash driver
  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
    [adapted for other PPC CPUs -- wd]
  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c

* Patch by Jon Diekema, 13 Feb 2004:
  Call show_boot_progress() whenever POST "FAILED" is printed.

* Patch by Nishant Kamat, 13 Feb 2004:
  Add support for TI OMAP1610 H2 Board
  Fixes for cpu/arm926ejs/interrupt.c
       (based on Richard Woodruff's patch for arm925, 16 Oct 03)
  Fix for a timer bug in OMAP1610 Innovator
  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2

* Patches by Stephan Linz, 12 Feb 2004:
  - add support for NIOS timer with variable period preload counter value
  - prepare POST framework support for NIOS targets

* Patch by Denis Peter, 11 Feb 2004:
  add POST support for the MIP405 board
2004-02-23 22:22:28 +00:00
wdenk
cf56e11019 Add Auto-MDIX support for INCA-IP 2004-02-20 22:02:48 +00:00
wdenk
c837dcb1a3 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes
2004-01-20 23:12:12 +00:00
wdenk
42d1f0394b * Patches by Xianghua Xiao, 15 Oct 2003:
- Added Motorola CPU 8540/8560 support (cpu/85xx)
  - Added Motorola MPC8540ADS board support (board/mpc8540ads)
  - Added Motorola MPC8560ADS board support (board/mpc8560ads)

* Minor code cleanup
2003-10-15 23:53:47 +00:00
wdenk
7205e4075d * Patches by Denis Peter, 9 Sep 2003:
add FAT support for IDE, SCSI and USB

* Patches by Gleb Natapov, 2 Sep 2003:
  - cleanup of POST code for unsupported architectures
  - MPC824x locks way0 of data cache for use as initial RAM;
    this patch unlocks it after relocation to RAM and invalidates
    the locked entries.

* Patch by Gleb Natapov, 30 Aug 2003:
  new I2C driver for mpc107 bridge. Now works from flash.

* Patch by Dave Ellis, 11 Aug 2003:
  - JFFS2: fix typo in common/cmd_jffs2.c
  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
  - JFFS2: remove node version 0 warning
  - JFFS2: accept JFFS2 PADDING nodes
  - SXNI855T: add AM29LV800 support
  - SXNI855T: move environment from EEPROM to flash
  - SXNI855T: boot from JFFS2 in NOR or NAND flash

* Patch by Bill Hargen, 11 Aug 2003:
  fixes for I2C on MPC8240
  - fix i2c_write routine
  - fix iprobe command
  - eliminates use of global variables, plus dead code, cleanup.
2003-09-10 22:30:53 +00:00
wdenk
27b207fd0a * Implement new mechanism to export U-Boot's functions to standalone
applications: instead of using (PPC-specific) system calls we now
  use a jump table; please see doc/README.standalone for details

* Patch by Dave Westwood, 24 Jul 2003:
  added support for Unity OS (a proprietary OS)
2003-07-24 23:38:38 +00:00
wdenk
2535d60277 * Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
2003-07-17 23:16:40 +00:00
wdenk
6dff552972 * Patches by Martin Krause, 14 Jul 2003:
- add I2C support for s3c2400 systems (trab board)
  - (re-) add "ping" to command table

* Fix handling of "slow" POST routines
2003-07-15 07:45:49 +00:00
wdenk
8564acf936 * Patches by Yuli Barcohen, 13 Jul 2003:
- Correct flash and JFFS2 support for MPC8260ADS
  - fix PVR values and clock generation for PowerQUICC II family
    (8270/8275/8280)

* Patch by Bernhard Kuhn, 08 Jul 2003:
  - add support for M68K targets

* Patch by Ken Chou, 3 Jul:
  - Fix PCI config table for A3000
  - Fix iobase for natsemi.c
    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)

* Allow to enable "slow" POST routines by key press on power-on
* Fix temperature dependend switching of LCD backlight on LWMON
* Tweak output format for LWMON
2003-07-14 22:13:32 +00:00
wdenk
d1cbe85b08 Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
- Allow to call sysmon function interactively
- PIC on LWMON board needs delay after power-on
- Add missing RSR definitions for MPC8xx
- Improve log buffer handling: guarantee clean reset after power-on
- Add support for EXBITGEN board
- Add support for SL8245 board
2003-06-28 17:24:46 +00:00
wdenk
8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00
wdenk
45219c4660 Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
2003-05-12 21:50:16 +00:00
wdenk
4532cb696e * LWMON extensions:
- Splashscreen support
  - modem support
  - sysmon support
  - temperature dependend enabling of LCD

* Allow booting from old "PPCBoot" disk partitions

* Add support for TQM8255 Board / MPC8255 CPU
2003-04-27 22:52:51 +00:00
wdenk
d126bfbdbd Add support for TQM862L modules 2003-04-10 11:18:18 +00:00
wdenk
6aff3115b9 * Use 1-byte-read instead of -write for iprobe() function
Add i2c commands to PM826 config

* extend I2C POST code: check for list on known addresses
2002-12-17 01:51:00 +00:00
wdenk
228f29ac6e * Improve log buffer code; use "loglevel" to decide which messages
to log on the console, too (like in Linux); get rid of "logstart"
2002-12-08 09:53:23 +00:00
wdenk
a6c7ad2f65 * Fix startup problems with VFD display on TRAB
* Patch by Pierre Aubert, 20 Nov 2002
  Add driver for Epson SED13806 graphic controller.
  Add support for BMP logos in cfb_console driver.
2002-12-03 21:28:10 +00:00
wdenk
ea909b7604 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
* Patch by Rod Boyce, 21 Nov 2002:
  fix PCMCIA on MBX8xx board

* Patch by Pierre Aubert , 21 Nov 2002
  Add CFG_CPM_POST_WORD_ADDR to make the offset of the
  bootmode word in DPRAM configurable
2002-11-21 23:11:29 +00:00
wdenk
56f94be3ef * Add support for log buffer which can be passed to Linux kernel's
syslog mechanism; used especially for POST results.

* Patch by Klaus Heydeck, 31 Oct 2002:
  Add initial support for kup4k board
2002-11-05 16:35:14 +00:00
wdenk
c609719b8d Initial revision 2002-11-03 00:24:07 +00:00
wdenk
324f6cfd12 Initial revision 2002-10-07 21:13:39 +00:00
wdenk
121cb96d51 Initial revision 2002-10-07 19:37:29 +00:00
wdenk
07c0487586 Initial revision 2002-09-24 11:14:13 +00:00
wdenk
a042ac8439 Initial revision 2002-09-12 22:36:57 +00:00
wdenk
a46d821fc8 Initial revision 2002-09-12 22:01:13 +00:00
wdenk
b6a6460b7d Initial revision 2002-08-27 17:36:41 +00:00