Commit Graph

137 Commits

Author SHA1 Message Date
Karl Apsite
657fd2d031 add test for two 'loadables'
Nothing too fancy.  A simple test that attmpts to load two loadables and
verify that they are properly unpacked in the u-boot sandbox.
Signed-off-by: Karl Apsite <Karl.Apsite@dornerworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-28 08:18:21 -04:00
Joe Hershberger
f68c2b2592 test: env: Add a test of the new regex behavior for attrs
The behavior of the env attrs depends on CONFIG_REGEX. Add an additional
test if that variable is set.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
b04d3553ee test: env: Add test for verifying env attrs
Add a test of the env_attr_lookup() function.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
421f86f329 test: env: Add test framework for env
Add a new "env" subcommand to the ut command.

This will run unit tests on the env code. This should be targetable to
any device that supports the env features needed for the tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
b6227d3993 test: dm: Recover the driver model tree after tests
Put the driver model for the system back into a good state after
completing the DM testing.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
09129bec8e test: dm: eth: Handle failed test env cleanup
Make sure that the env gets cleaned up after a test fails so that other
tests aren't affected.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:16:17 -04:00
Joe Hershberger
7cccc66af5 test: dm: Don't bail on all tests if one test fails
There's not much point in having a failure count if we always give up on
the first failure. Also stop clearing the entire state between tests.

Make sure that any failures are still passed out to the command line.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
feb3847250 test: Move the unit tests to their own menu
Make all unit tests selectable as a menu of test suites instead of just
sitting in the top-level menu individually.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
c812f722f8 test: dm: Move the time test over to the ut command
Unify the command for running unit tests further by moving the "ut_time"
command over to "ut time".

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:16:17 -04:00
Joe Hershberger
40441e0bd3 test: dm: Move the dm tests over to the ut command
Unify the command for running unit tests further by moving the "dm test"
command over to "ut dm".

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
c617ede08a test: Add a common unit test command
Add a command that all other unit tests should be a sub-command of.
Also include a command that will run all tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
e721b882e9 test: Generalize the unit test framework
Separate the ability to define tests and assert status of test functions
from the dm tests so they can be used more consistently throughout all
tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:16 -04:00
Joe Hershberger
73c2bbeea3 net: Apply default format rules to all ethaddr
Use a regular expression to apply the default formatting flags for all
ethaddr env vars.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:20 -04:00
Przemyslaw Marczak
f64000c302 test: dm: test.dts - move to sandbox dts directory
The file test.dts from driver model test directory,
was compiled by call dtc in script: test/dm/test-dm.sh.

This doesn't allow for including of dtsi files and using
of C preprocessor routines in this dts file.

Since the mentioned script builds U-Boot before tests,
then moving the test.dts file into sandbox dts directory
is reasonable.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:59:07 -06:00
Przemyslaw Marczak
e8f339e0e8 test: dm: add sandbox PMIC framework tests
This change adds new file to sandbox driver model test environment.
The file is: test/dm/power.c, and it includes tests for PMIC framework,
which includes PMIC uclass and REGULATOR uclass.

All tests are based od Sandbox PMIC emulated device. Some test constants for
this device are defined in the header: include/power/sandbox_pmic.h

PMIC tests includes:
- pmic get - tests, that pmic_get() returns the requested device
- pmic I/O - tests I/O by writing and reading some values to PMIC's registers
             and then compares, that the write/read values are equal.

The regulator tests includes:
- Regulator get by devname/platname
- Voltage set/get
- Current set/get
- Enable set/get
- Mode set/get
- Autoset
- List autoset

For the regulator 'get' test, the returned device pointers are compared,
and their names are also compared to the requested one.
Every other test, first sets the given attribute and next try to get it.
The test pass, when the set/get values are equal.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Simon Glass
8271f5d4c3 test: Add a simple time test
Sometimes the time functions are incorrect due to bad time support on a
board. Add a unit test which tries to detect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06 12:48:37 -06:00
Simon Glass
4772511475 dm: rtc: Add tests for real-time clocks
Add some simple tests to verify that the RTC uclass works correctly in
U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Simon Glass
fbe07ba0f8 dm: test: dts: Sort the aliases in the test device tree file
Sort these aliases to avoid confusion as to what is present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-05 20:58:40 -06:00
Simon Glass
182bf92d19 dm: i2c: Add an explicit test mode to the sandbox I2C driver
At present this driver has a few test features. They are needed for running
the driver model unit tests but are confusing and unnecessary if using
sandbox at the command line. Add a flag to enable the test mode, and don't
enable it by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:19 -06:00
Joe Hershberger
172a31bf87 test: dm: eth: Skip timeouts on ping tests
Indicate to the emulated sandbox Ethernet driver when we expect a
timeout and tell it to leap forward.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:18 -06:00
Simon Glass
f9fd4558ea dm: test: Don't clear global_data in dm_test_uclass_before_ready()
We must not clear global_data even in tests, since the ram_buffer (which
is used by malloc()) will also be lost, and subsequent tests will fail.

Zero only the global_data fields that are required for the test to function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-22 11:15:36 -06:00
Przemyslaw Marczak
6e0c4880c8 dm: test: Add tests for get/find uclass's device by name
This commit introduces simple tests for functions:
- uclass_find_device_by_name()
- uclass_get_device_by_name()

Tests added by this commit:
- Test: dm_test_uclass_devices_find_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_find_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_find_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

- Test: dm_test_uclass_devices_get_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_get_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_get_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * founddev is active
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:16 -06:00
Przemyslaw Marczak
9e85f13ddc dm: test: Add tests for get/find uclass devices
This commit introduces simple tests for functions:
- uclass_find_first_device()
- uclass_find_next_device()
- uclass_first_device()
- uclass_next_device()

Tests added by this commit:
- Test: dm_test_uclass_devices_find:
  * call uclass_find_first_device(), then check if: (dev != NULL), (ret == 0)
  * for the rest devices, call uclass_find_next_device() and do the same check

- Test: dm_test_uclass_devices_get:
  * call uclass_first_device(), then check if:
    -- (dev != NULL), (ret == 0), device_active()
  * for the rest devices, call uclass_next_device() and do the same check

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Przemyslaw Marczak
754e71e850 dm: test: Add tests for device's uclass platform data
This test introduces new test structure type:dm_test_perdev_uc_pdata.
The structure consists of three int values only. For the test purposes,
three pattern values are defined by enum, starting with TEST_UC_PDATA_INTVAL1.

This commit adds two test cases for uclass platform data:
- Test: dm_test_autobind_uclass_pdata_alloc - this tests if:
  * uclass driver sets: .per_device_platdata_auto_alloc_size field
  * the devices's: dev->uclass_platdata is non-NULL

- Test: dm_test_autobind_uclass_pdata_valid - this tests:
  * if the devices's: dev->uclass_platdata is non-NULL
  * the structure of type 'dm_test_perdev_uc_pdata' allocated at address
    pointed by dev->uclass_platdata. Each structure field, should be equal
    to proper pattern data, starting from .intval1 == TEST_UC_PDATA_INTVAL1.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Joe Hershberger
bc0571fc10 net: cosmetic: Fix checkpatch.pl failures in net.c
Finish eliminating CamelCase from net.c and other failures

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:35 -06:00
Joe Hershberger
049a95a775 net: cosmetic: Change IPaddr_t to struct in_addr
This patch is simply clean-up to make the IPv4 type that is used match
what Linux uses. It also attempts to move all variables that are IP
addresses use good naming instead of CamelCase. No functional change.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Simon Glass
e00cb2232b dm: usb: Add tests for the USB uclass
This adds a simple test for probing and a functional test using the flash
stick emulator, which tests a large chunk of the USB stack.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
57f54d55bd dm: test: Allow 'dm test' to select a particular test to run
As well as running all tests, it is useful to be able to run a selected test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
b66c0a662b dm: test: Correct printf() output nit in 'dm uclass'
Neither the hyphen nor the equals sign is needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
206d4d2b4b dm: core: Mark device as active before calling uclass probe() methods
The uclass pre-probe functions may end up calling back into the device in
some circumstances. This can fail if recursion takes place. Adjust the
ordering so that we mark the device as active early, then retract this
later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:19 -06:00
Simon Glass
e23eb614a4 dm: test: bus: Use a local variable to simplify code
Adjust this test to avoid repeating the same code too often.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:19 -06:00
Joe Hershberger
60304592b9 net: Improve error handling
Take a pass at plumbing errors through to the users of the network stack

Currently only the start() function errors will be returned from
NetLoop(). recv() tends not to have errors, so that is likely not worth
adding. send() certainly can return errors, but this patch does not
attempt to plumb them yet. halt() is not expected to error.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:14 -06:00
Joe Hershberger
7ece1c61ad test: dm: net: Add a test of the netretry behavior
The effect of the "netretry" env var was recently changed. This test
checks that behavior.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
7d104eab7d test: dm: eth: Add testing for ethrotate env var
Make sure that the ethrotate behavior occurs as expected.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
6536b9bb76 dm: eth: Add support for ethprime env var
The ethprime env var is used to indicate the starting device if none is
specified in ethact. Also support aliases specified in the ethprime var.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
e58780dcb7 dm: eth: Add support for aliases
Allow network devices to be referred to as "eth0" instead of
"eth@12345678" when specified in ethact.

Add tests to verify this behavior.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
bfacad7da1 test: dm: eth: Add tests for the eth dm implementation
Add a test for the eth uclass using the sandbox eth driver. Verify basic
functionality of the network stack / eth uclass by exercising the ping
function.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:12 -06:00
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Joe Hershberger
eb374221ec test: dm: Reorder the objects to build
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
d3b7ff14f4 dm: pci: Add driver model tests for PCI
Add some basic tests to check that things work as expected with sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
fa67f90fc3 dm: Show both allocated and requested seq numbers in 'dm uclass'
Both of these values are useful for understanding what is going on, so show
them both.

The requested number comes from a device tree alias. The allocated one is
set up when the device is activated, and is unique throughout the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
02c07b3741 dm: core: Add a uclass pre_probe() method for devices
Some uclasses want to set up a device before it is probed. Add a method
for this.

An example is with PCI, where a PCI uclass wants to set up its private
data for later use. This allows the device's uclass() method to make calls
whcih use that data (for example, read PCI memory regions from device
tree, set up bus numbers).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
e564f054af dm: core: Add dev_get_uclass_priv() to access uclass private data
Add a convenience function to access the private data that a uclass stores
for each of its devices. Convert over most existing uses for consistency
and to provide an example for others.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
1967982a95 dm: test: Add a Kconfig file
Add a file to control driver model test features.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:34 -07:00
Simon Glass
ca88b9b939 dm: i2c: Add a dm_ prefix to driver model bus speed functions
As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model
versions of these functions to avoid conflicts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-02-12 10:35:33 -07:00
Tom Rini
8e3da9dd11 Merge branch 'master' of git://git.denx.de/u-boot-dm 2015-01-30 09:24:42 -05:00
Simon Glass
d0cff03e18 dm: spi: Move slave details to child platdata
At present we go through various contortions to store the SPI slave's chip
select in its private data. This only exists when the slave is active so
must be set up when it is probed. Until the device is probed we don't
actually know what chip select it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the chip select when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:56 -07:00
Simon Glass
83c7e434c9 dm: core: Allow uclass to set up a device's child before it is probed
Some buses need to set up their devices before they can be used. This setup
may well be common to all buses in a particular uclass. Support a common
pre-probe method for the uclass, called before any bus devices are probed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
081f2fcbd9 dm: core: Allow the uclass to set up a device's child after binding
For buses, after a child is bound, allow the uclass to perform some
processing. This can be used to figure out the address of the child (e.g.
the chip select for SPI slaves) so that it is ready to be probed.

This avoids bus drivers having to repeat the same process, which really
should be done by the uclass, since it is common.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
dac8db2ce6 dm: core: Allow uclasses to specify private data for a device's children
In many cases the per-child private data for a device's children is defined
by the uclass rather than the individual driver. For example, a SPI bus
needs to store information about each of its children, but all SPI drivers
store the same information. It makes sense to allow the uclass to define
this data.

If the driver provides a size value for its per-child private data, then use
it. Failng that, fall back to that provided by the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00