Commit Graph

9891 Commits

Author SHA1 Message Date
Tom Rini
6b29a395b6 Merge git://git.denx.de/u-boot-mpc85xx 2016-11-29 19:42:48 -05:00
Liviu Dudau
88e0d59315 vexpress64: Juno: Change PCI buss addresses for IO to start from zero.
Juno uses a 1:1 mapping between CPU and PCI addresses for IO. First,
that will trip devices that cannot use more than 16 bits of addresses
for IO, second it is un-necessary as the system can handle zero-based
PCI addresses just fine.

Change the mapping to start IO bus addresses from zero.

Signed-off-by: Liviu Dudau <Liviu.Dudau@foss.arm.com>
2016-11-29 08:15:30 -05:00
Alexander Graf
1bcf7a30d8 bcm2835: Reserve the spin table in efi memory map
Firmware provides a spin table on the raspberry pi. This table shouldn't
get overwritten by payloads, so we need to mark it as reserved.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-28 20:15:20 -05:00
Fabian Vogt
7670909638 ARM: bcm283x: use OF_CONTROL for bcm283x
This patch removes use of U_BOOT_DEVICE in board/raspberrypi/rpi/rpi.c,
enables OF_CONTROL in the config and adjusts the rpi_*defconfig configs.

Signed-off-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28 20:15:18 -05:00
Fabian Vogt
d8396a3272 board: rpi: move uart deactivation to board_init
When using OF_CONTROL, the disabled value of the mini UART platdata
gets reset after board_early_init_f. So move detection and disabling
to board_init and remove board_early_init_f.
This uses the first device using the mini uart driver, as this method
works reliably with different device trees or even no device tree at all.

Signed-off-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28 20:09:51 -05:00
Andrew F. Davis
ac34286647 keystone2: Move target selection to Kconfig
The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick
a board target, but the header configs also set K2x_EVM. This config
is redundant, remove it and use TARGET_K2x_EVM everywhere in its place.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-11-28 15:10:34 -05:00
Max Krummenacher
877ea607a8 colibri_vf: usb gadget: toradex pid is now set generically
remove now unused CONFIG_TRDX_PID_XXX

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:33 -05:00
Marcel Ziswiler
b891d01038 apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling
With our common code in place actually make use of it across all our
modules.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:33 -05:00
Marcel Ziswiler
a2777ecb9d toradex: config block handling
Add Toradex factory configuration block handling. The config block is a
data structure which gets stored to flash during production testing. The
structure holds such information as board resp. hardware revision,
product ID and serial number which is used as the NIC part of the
Ethernet MAC address as well. The config block will be read upon boot by
the show_board_info() function, displayed as part of the board
information and passed to Linux via device tree or ATAGs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28 15:10:32 -05:00
FUKAUMI Naoki
5782954c2b sunxi: add support for Nintendo NES Classic Edition
Add board support for sun8i_r16 Nintendo NES Classic edition.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
[jagan: Add commit message body]
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-28 15:10:30 -05:00
Tom Rini
8d0898544e Merge git://git.denx.de/u-boot-rockchip 2016-11-26 09:26:27 -05:00
Simon Glass
c420ef67e5 rockchip: Add support for veyron-minnie (ASUS Chromebook Flip)
This adds support for the Asus Chromebook Flip, an RK3288-based clamshell
device which can flip into 'tablet' mode. The device tree file comes from
Linux v4.8. The SDRAM parameters are for 4GB Samsung LPDDR3.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:32 -07:00
Simon Glass
e70408c069 rockchip: Add support for veyron-mickey (Chromebit)
This adds support for the Asus Chromebit, and RK3288-based device designed
to plug directly into an HDMI monitor. The device tree file comes from
Linux v4.8.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:32 -07:00
Simon Glass
38ffcb679b rockchip: veyron: Add a note about the SDRAM voltage
Add a comment to indicate that we are not supporting the PWM regulator
yet.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:31 -07:00
Simon Glass
5e9b15034b rockchip: Rename jerry files to veyron
At present we have a single rk3288-based Chromebook: chromebook_jerry. But
all such Chromebooks can use the same binary with only device-tree
differences. The family name is 'veyron', so rename the files accordingly.

Also update the device-tree filename since this currently differs from
Linux.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:31 -07:00
Kever Yang
8aea45a745 evb-rk3399: deduced the dram node size when space reserved
The size dram node need to be deduced by the same amount of reserved space.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-11-25 17:59:29 -07:00
Tom Rini
ed77ccd014 Merge git://git.denx.de/u-boot-fsl-qoriq
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	arch/arm/Kconfig
2016-11-25 17:39:54 -05:00
York Sun
37376ae0dc powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCN
Use TARGET_MPC8641HPCN from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
51f05ff914 powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCD
Use TARGET_MPC8610HPCD from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:16 -08:00
York Sun
49ec8aa840 powerpc: T4240RDB: Remove macro CONFIG_T4240RDB
Use CONFIG_TARGET_T4240RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
12ffdb3b12 powerpc: T4160RDB: Separate from T4240RDB in Kconfig
Use TARGET_T4160RDB to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
673c01c708 powerpc: T4240QDS: Remove macro CONFIG_T4240QDS
Use CONFIG_TARGET_T4240QDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
9c21d06c67 powerpc: T4160QDS: Separate from T4240QDS in Kconfig
Use TARGET_T4160QDS to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:15 -08:00
York Sun
01671e668b powerpc: T2080RDB: Rename from T208XRDB in Kconfig
T208XRDB only has one target T2080RDB. Use TARGET_T2080RDB in Kconfig
and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
638d5be055 powerpc: T208XQDS: Split as T2080QDS and T2081QDS
Use two separated targets in Kconfig to simplify configurations.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
78e5699523 powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDB
CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for
all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI.
CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
0167369cff powerpc: T1042RDB: Remove macro CONFIG_T1042RDB
Use TARGET_T1042RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
319ed24a8a powerpc: T1042D4RDB: Separate from T1042RDB in Kconfig
Use TARGET_T1042D4RDB in Kconfig to simplify config options.
Remove macro CONFIG_T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
55ed8ae367 powerpc: T1042RDB_PI: Split from T1042RDB in Kconfig
Use separated TARGET_T1042RDB_PI to simplify config options.
Remove macro CONFIG_T1042RDB_PI.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:14 -08:00
York Sun
6fcddd0985 powerpc: T1040RDB: Remove macro CONFIG_T1040RDB
Use CONFIG_TARGET_T1040RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
a016735c79 powerpc: T1040D4RDB: Separate from T1040RDB in Kconfig
Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace
CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
5d73701073 powerpc: T1040: Remove macro CONFIG_PPC_T1040
Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
95a809b918 powerpc: T104XRDB: Split to T1040RDB and T1042RDB in Kconfig
Split ARCH_T104XRDB as ARCH_T1040RDB and ARCH_T1042RDB in Kconfig to
simplify config options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
e5d5f5a8be powerpc: T1024: Remove macro CONFIG_PPC_T1024
Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
6f53bd475a powerpc: T1024QDS: Rename Kconfig option to match the name
Rename TARGET_T102XQDS to TARGET_T1024QDS to match the name.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:13 -08:00
York Sun
08c752920d powerpc: T102xRDB: Split as T1023RDB and T1024RDB
The defconfig files are separated. Splitting targets in Kconfig simplifies
config options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
b41f192b67 powerpc: B4420: Remove macro CONFIG_PPC_B4420
Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up
existing macros.
2016-11-23 23:42:12 -08:00
York Sun
d46a4a1378 powerpc: B4860QDS: Remove macro CONFIG_B4860QDS
Use CONFIG_TARGET_B4860QDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
45a8d11782 powerpc: B4420QDS: Split from B4860QDS in Kconfig
Use TARGET_B4420QDS to simplify Kconfig options.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:12 -08:00
York Sun
161b472482 powerpc: P5040DS: Remove macro CONFIG_P5040DS
Use CONFIG_TARGET_P5040DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
9539036012 powerpc: P5040: Remove macro CONFIG_P5040
Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
3b83649d53 powerpc: P5020DS: Remove macro CONFIG_P5020DS
Use CONFIG_TARGET_P5020DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
529fb06208 powerpc: P4080DS: Remove macro CONFIG_P4080DS
Use CONFIG_TARGET_P4080DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
850af2c7a9 powerpc: P3041DS: Remove macro CONFIG_P3041DS
Use CONFIG_TARGET_P3041DS instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:11 -08:00
York Sun
37107facbc powerpc: P2041RDB: Remove macro CONFIG_P2041RDB
Use CONFIG_TARGET_P2041RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
4593637b13 powerpc: P2020: Remove macro CONFIG_P2020
Replace CONFIG_P2020 with ARCH_P2020 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:10 -08:00
York Sun
e5cc150945 powerpc: P1_P2_RDB_PC: Drop TARGET_P1_P2_RDB_PC
All boards covered by this group have been converted to their own
targers. Drop TARGET_P1_P2_RDB_PC from Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
8435aa777e powerpc: P2020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P2020RDB_PC instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P2020RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
b0c98b4b9f powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P1025RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00
York Sun
4eedabfe93 powerpc: P1024RDB: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1024RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1024RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-23 23:42:09 -08:00