Commit Graph

94 Commits

Author SHA1 Message Date
Andre Schwarz
5e0de0e216 mpc5xxx: Add MVBC_P board support
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-15 10:12:58 -06:00
Hugo Villeneuve
2b1fa9d383 ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
ARM: Fix for incorrect version of patch applied when
adding support for the Lyrtech SFF-SDR board.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
2008-07-10 00:42:59 +02:00
Andre Schwarz
c005b93925 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
Add MPC8343 based board mvBlueLYNX-M7.
It's a single board stereo camera system.
Please read doc/README.mvblm7 for details.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 12:52:57 -05:00
Wolfgang Denk
2c78febd11 Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire 2008-04-08 00:10:17 +02:00
Matthew Fettke
f71d9d91a2 ColdFire: Added MCF5275 cpu support.
Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
2008-03-31 15:09:08 -06:00
Mark Jonas
3313e0e262 sh: Added support for SH7720 based board MPR2.
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:12 +09:00
Wolfgang Denk
b29661fc11 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-24 15:21:36 +01:00
Peter Pearse
d7d9afa48c Merge branch '080131_artila' of git://linux-arm.org/u-boot-armdev 2008-02-15 12:59:56 +00:00
Timo Tuunainen
ea8d989f4e Support for Artila M-501 starter kit
Kimmo Leppala / Sysart and
Timo Tuunainen / Sysart
2008-02-14 09:38:08 +00:00
Stelian Pop
20b197c6f2 AT91CAP9 support : build integration
Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14 09:37:57 +00:00
TsiChungLiew
57a127201e ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:43 -06:00
Dave Liu
8bd522ce4a mpc83xx: Add the support for MPC8315ERDB board
The features list:
- Boot from NOR Flash
- DDR2 266MHz hardcoded configuration
- Local bus NOR Flash R/W operation
- I2C, UART, MII and RTC
- eTSEC0/1 support
- PCI host

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-16 12:00:49 -06:00
Dave Liu
22b448dbfb mpc83xx: update the CREDITS and MAINTAINERS
update the CREDITS and MAINTAINERS.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-01-08 09:55:40 -06:00
Nobuhiro Iwamatsu
b8685affe6 Merge git://www.denx.de/git/u-boot
Conflicts:

	CREDITS
2007-09-23 01:29:43 +09:00
Stefan Roese
8280f6a1c4 Coding style cleanup
Signed-off-by: Stefan Roese <sr@denx.de>
2007-08-18 14:33:02 +02:00
TsiChungLiew
4a442d3186 ColdFire: Add M5235EVB Platform for MCF523x
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-17 11:36:29 -06:00
TsiChungLiew
8ae158cd87 ColdFire: Add M54455EVB for MCF5445x
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16 17:43:23 -06:00
TsiChungLiew
a1436a8426 ColdFire: Add M5253EVBE platform for MCF52x2
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-08-16 17:43:21 -06:00
Stefan Roese
d61ea14885 Merge with git://www.denx.de/git/u-boot.git 2007-08-15 14:51:27 +02:00
Stefan Roese
3b3bff4cbf Merge with git://www.denx.de/git/u-boot.git 2007-08-14 16:36:29 +02:00
Sergey Kubushyn
c74b2108e3 [ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 20:26:18 +02:00
Niklaus Giger
641cca9569 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
This series of patches adds support for 2 boards from Netstal Maschinen.

The HCU4 has a PPC405Gpr and
the HCU5 has a PPC440EPX.

The HCU4 has a somehow complicated flash setup, as the booteprom is
only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
elegant solution.

The HCU5 has only a booteprom as the whole code will be downloaded from a
different board which has HD, CD-ROM, etc and where all code is stored.

This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
Thanks them a lot.

Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2007-08-10 09:08:42 +02:00
TsiChung Liew
8e585f02f8 Added M5329AFEE and M5329BFEE Platforms
Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
drivers/serial,  immap_5329.h, m5329.h, mcfrtc.h,
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
rtc/mcfrtc.c

Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
lib_m68k/time.c, net/eth.c and rtc/Makefile

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2007-06-18 15:17:56 -06:00
Nobuhiro Iwamatsu
0b135cfc2e sh: First support code of SuperH.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-05-13 20:58:00 +09:00
Wolfgang Denk
c8f2280162 Merge with /home/wd/git/u-boot/custodian/u-boot-microblaze 2007-04-04 02:05:48 +02:00
Michal Simek
1798049522 Support for XUPV2P board
Reset support
BSP autoconfig support
2007-03-26 01:39:07 +02:00
Paul Gortmaker
91e2576977 mpc83xx: U-Boot support for Wind River SBC8349
I've redone the SBC8349 support to match git-current, which
incorporates all the MPC834x updates from Freescale since the 1.1.6
release,  including the DDR changes.

I've kept all the SBC8349 files as parallel as possible to the
MPC8349EMDS ones for ease of maintenance and to allow for easy
inspection of what was changed to support this board.  Hence the SBC8349
U-Boot has FDT support and everything else that the MPC8349EMDS has.

Fortunately the Freescale updates added support for boards using CS0,
but I had to change spd_sdram.c to allow for board specific settings for
the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
default if the board doesn't specify a value.)

Hopefully this should be mergeable as-is and require no whitespace
cleanups or similar, but if something doesn't measure up then let me
know and I'll fix it.

Thanks,
Paul.
2007-03-02 11:05:53 -06:00
Timur Tabi
2ad6b513b3 mpc83xx: Add support for the MPC8349E-mITX
PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006090742000024 "Add support for multiple I2C buses"
  2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
  3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
  4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
  5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

CHANGELOG:

* Add support for the Freescale MPC8349E-mITX reference design platform.
  The second TSEC (Vitesse 7385 switch) is not supported at this time.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:20 -06:00
Wolfgang Denk
8d4ac79436 Add support for EP82xxM boards
Patch by Aaron Sells, 20 Jun 2006
2006-10-09 00:35:30 +02:00
Wolfgang Denk
53dd6ce4f0 Add support for KVME080 board
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21 11:29:20 +02:00
Heiko Schocher
f5e0d03970 Add support for wrPPMC7xx/74xx boards
Patch from Richard Danter, 12 Aug 2005
2006-06-19 11:02:41 +02:00
Wolfgang Denk
0c32d96ddd Add support for gth2 board
Patch by Thomas Lange, Aug 11 2005
2006-06-16 17:32:31 +02:00
Stefan Roese
6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Wolfgang Denk
3df5bea0b0 Add support for NetSilicon NS7520 processor.
Patch by Art Shipkowski, 12 May 2005

Cleanup.
2005-10-09 01:41:48 +02:00
Wolfgang Denk
7521af1c7d Add support for AP1000 board.
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
Wolfgang Denk
8e6f1a8ec2 Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
Patch by Marc Leeman, 04 Mar 2005
2005-09-25 18:59:36 +02:00
Wolfgang Denk
2df741bf7c Add Vibren (was Accelent) PXA255 IDP Support
Patch by Cliff Brake, 04 Feb 2005
2005-09-25 15:57:49 +02:00
Wolfgang Denk
0c8721a466 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Wolfgang Denk
6bdf430660 Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
2005-08-15 15:55:00 +02:00
Wolfgang Denk
b3b0fd552e Fix Murray Jensen's mail address.
Patch by Murray Jensen, 30 Jun 2005
2005-08-12 23:20:59 +02:00
wdenk
3a574cbe72 * Patch by Greg Ungerer, 19 May 2005:
add support for the KS8695P (ARM 922 based) CPU

* Patch by Steven Scholz, 19 May 2005:
  Add support for CONFIG_SERIAL_TAG on ARM boards
2005-05-19 22:39:42 +00:00
wdenk
20787e23b8 * Patches by Robert Whaley, 29 Nov 2004:
- update the pxa-regs.h file for PXA27x chips
  - add PXA27x based ADSVIX board
  - add support for MMC on PXA27x processors

* Patch by Andrew E. Mileski, 28 Nov 2004:
  Fix PPC4xx SPD SDRAM detection bug

* Patch by Hiroshi Ito, 26 Nov 2004:
  Fix logic of "test -z" and "test -n" commands
2005-04-06 00:04:16 +00:00
wdenk
8b0bfc6804 * Patch by Yuli Barcohen, 08 Nov 2004:
Add support for Analogue & Micro Rattler boards.
  Tested on Rattler8248.

* Patch by Andre Renaud, 08 Nov 2004:
  Fix watchdog support in common/lcd.c

* Patch by Marc Leeman, 05 Nov 2003:
  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
  bug only affects the XPC8245 processors
2005-04-03 23:11:38 +00:00
wdenk
652a10c096 * Patch by Daniel Poirot, 10 Oct 2004:
Add support for Wind River sbc405 board

* Patch by Rainer Brestan, 12 Oct 2004:
  Make examples/Makefile more robust
2005-01-09 23:48:14 +00:00
wdenk
ff36fd8591 * Patch by Leif Lindholm, 23 Sep 2004:
add support for the AMD db1550 board

* Patch by Travis Sawyer, 15 Sep 2004:
  Add CONFIG_SERIAL_MULTI support for ppc4xx,
  update README.serial_multi
2005-01-09 22:28:56 +00:00
wdenk
c15f3120ec * Patch by Michael Bendzick, 30 Aug 2004:
- Improve platform.S code for omap1510inn that detects whether code
    is running from SDRAM or not. Patch allows SDRAM to be configured
    if code is running out of SRAM at 0x20000000.

* Patch by Frederick Klatt, 30 Aug 2004:
  Add support for the Wind River SBC8540/SBC8560 boards
2004-10-10 22:44:24 +00:00
wdenk
5c952cf024 Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
wdenk
6c7a14084a Patch by Mark Jonas, 01 Jul 2004:
Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
MGT5100 and MPC5200 based Freescale platforms.
2004-07-11 19:17:20 +00:00
wdenk
857cad37a4 Patches by Yasushi Shoji, 29 Jun 2004:
- add empty include/asm-microblaze/processor.h
- add to CREDITS and MAINTAINERS
- add gd initialization
- add MicroBlaze and SUZAKU board to MAKEALL script
- add reset support for SUZAKU
- add flush_cache() for MicroBlaze
- add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
  size flash memory on SUZAKU
2004-07-10 23:48:41 +00:00
wdenk
fabd46acff * Patch by Prakash Kumar, 27 Jun 2004:
Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h
2004-07-10 23:11:10 +00:00