Commit Graph

219 Commits

Author SHA1 Message Date
Patrick Delaunay
ecf1544232 env: sf: remove the static env_flash variable
As the the SPI flash is probed and is released in each ENV sf function
the env_flash no more need to be static.

This patch move this device handle as local variable of each function and
simplify the associated code (env_flash is never == NULL when
setup_flash_device is called).

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-16 17:33:33 -04:00
Patrick Delaunay
c2d00364c1 env: sf: add missing spi_flash_free
Free the SPI resources by calling spi_flash_free() in each env sf
function to avoid issue for other SPI users.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-16 17:33:09 -04:00
Patrick Delaunay
25d90ad45a env: sf: add support of command env erase
Add support of opts erase for env in SPI flash;
this opts is used by command 'env erase'.

This command only fills the env offset by 0x0 (bit flip to 0) and
the saved environment becomes invalid (with bad CRC).

It doesn't erase the sector here to avoid issue when the sector
is larger than the env (i.e. embedded when
CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE).

The needed sector erase will be managed in the next "env save" command,
using the opt ".save", before to update the environment in SPI flash.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-16 17:32:52 -04:00
Patrick Delaunay
e41f55b32e env: sf: update the use of macro ENV_SAVE_PTR
Remove CONFIG_IS_ENABLED(SAVEENV) as it is already tested in
the ENV_SAVE_PTR macro.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-16 17:32:34 -04:00
Patrick Delaunay
1af031ac3e env: add ENV_ERASE_PTR macro
Add ENV_ERASE_PTR macro to handle erase opts and remove the associated
ifdef.

This patch is a extension of previous commit 82b2f41357 ("env_internal.h:
add alternative ENV_SAVE_PTR macro").

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-16 17:32:34 -04:00
Marek Vasut
5557eec01c env: Fix invalid env handling in env_init()
This fixes the case where there are multiple environment drivers, one of
them is the default environment one, and it is followed by an environment
driver which does not implement .init() callback. The default environment
driver sets gd->env_valid to ENV_INVALID and returns 0 from its .init()
callback implementation, which is valid behavior for default environment.

Since the subsequent environment driver does not implement .init(), it
also does not modify the $ret variable in the loop. Therefore, the loop
is exited with gd->env_valid=ENV_INVALID and ret=0, which means that the
code further down in env_init() will not reset the environment to the
default one, which is incorrect.

This patch sets the $ret variable back to -ENOENT in case the env_valid
is set to ENV_INVALID by an environment driver, so that the environment
would be correctly reset back to default one, unless a subsequent driver
loads a valid environment.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-By: Tim Harvey <tharvey@gateworks.com>
2021-04-16 13:37:07 -04:00
Brandon Maier
2339f01af6 env/fat.c: support redund environment
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Wolfgang Denk <wd@denx.de>
2021-04-16 13:37:06 -04:00
Martin Fuzzey
9636bf8b2e env: Fix warning when forcing environment without ENV_ACCESS_IGNORE_FORCE
Since commit 0f036bf4b8 ("env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set")
a warning message is displayed when setenv -f is used WITHOUT
CONFIG_ENV_ACCESS_IGNORE_FORCE, but the variable is set anyway, resulting
in lots of log pollution.

env_flags_validate() returns 0 if the access is accepted, or non zero
if it is refused.

So the original code
	#ifndef CONFIG_ENV_ACCESS_IGNORE_FORCE
		if (flag & H_FORCE)
			return 0;
	#endif

was correct, it returns 0 (accepts the modification) if forced UNLESS
IGNORE_FORCE is set (in which case access checks in the following code
are applied). The broken patch just added a printf to the force accepted
case.

To obtain the intent of the patch we need this:
	if (flag & H_FORCE) {
	#ifdef CONFIG_ENV_ACCESS_IGNORE_FORCE
		printf("## Error: Can't force access to \"%s\"\n", name);
	#else
		return 0;
	#endif
	}

Fixes: 0f036bf4b8 ("env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set")

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
2021-04-16 11:55:55 -04:00
Brandon Maier
b9c3052fbb env: increment redund flag on read fail
If one of the reads fails when importing redundant environments (a
single read failure), the env_flags wouldn't get initialized in
env_import_redund(). If a user then calls saveenv, the new environment
will have the wrong flags value. So on the next load the new environment
will be ignored.

While debugging this, I also noticed that env/sf.c was not correctly
handling a single read failure, as it would not check the crc before
assigning it to gd->env_addr.

Having a special error path for when there is a single read failure
seems unnecessary and may lead to future bugs. Instead collapse the
'single read failure' error to be the same as a 'single crc failure'.
That way env_check_redund() either passes or fails, and if it passes we
are guaranteed to have checked the CRC.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-04-16 11:55:55 -04:00
Rasmus Villemoes
bcb44f62b2 env: add CONFIG_ENV_SECT_SIZE_AUTO
This is roughly the U-Boot side equivalent to commit
e282c422e0 (tools: fw_env: use erasesize from MEMGETINFO ioctl). The
motivation is the case where one has a board with several revisions,
where the SPI flashes have different erase sizes.

In our case, we have an 8K environment, and the flashes have erase
sizes of 4K (newer boards) and 64K (older boards). Currently, we must
set CONFIG_ENV_SECT_SIZE to 64K to make the code work on the older
boards, but for the newer ones, that ends up wasting quite a bit of
time reading/erasing/restoring the last 56K.

At first, I wanted to allow setting CONFIG_ENV_SECT_SIZE to 0 to mean
"use the erase size the chip reports", but that config
option is used in a number of preprocessor conditionals, and shared
between ENV_IS_IN_FLASH and ENV_IS_IN_SPI_FLASH.

So instead, introduce a new boolean config option, which for now can
only be used with ENV_IS_IN_SPI_FLASH. If left off, there's no change
in behaviour.

The only slightly annoying detail is that, when selected, the compiler
is apparently not smart enough to see that the the saved_size and
saved_offset variables are only used under the same "if (sect_size >
CONFIG_ENV_SIZE)" condition as where they are computed, so we need to
initialize them to 0 to avoid "may be used uninitialized" warnings.

On our newer boards with the 4K erase size, saving the environment now
takes 0.080 seconds instead of 0.53 seconds, which directly translates
to that much faster boot time since our logic always causes the
environment to be written during boot.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-16 11:55:55 -04:00
Rasmus Villemoes
4da7347d85 env/sf.c: use a variable to hold the sector size
As preparation for the next patch, use a local variable to represent
the sector size. No functional change.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-16 11:55:55 -04:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Patrick Delaunay
ea5641ec22 env: sf: cosmetic: remove unnecessary space
Remove the unnecessary space before the 2 "done:" labels
in env_sf_save().

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-29 10:36:49 -05:00
Michal Simek
4e3fc5efeb env: Remove all dependencies for SYS_REDUNDAND_ENVIRONMENT
CONFIG_SYS_REDUNDAND_ENVIRONMENT is changing in env_internal.h how u-boot
works with variables. struct environment_s has one byte flags property
which also affects ENV_SIZE macro.

I have reached the case where CONFIG_ENV_IS_NOWHERE is default setup
but custom scripts can be designed in a way that u-boot is asked to
import/export variables from/to file which can be in certain format.
That's why also for this configuration make sense to enable
CONFIG_SYS_REDUNDAND_ENVIRONMENT because it depends on environment file
format.

The patch is removing dependency on this configuration to support selecting
environment file format without any specific dependency where variables are
stored.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-01-20 08:34:53 +01:00
Heinrich Schuchardt
7291332a73 env: typo enougth
%s/enougth/enough/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-11-19 09:45:49 -05:00
Hoyeonjiki Kim
2a0a577aad env: mmc: Correct partition comparison in mmc_offset_try_partition
The function mmc_offset_try_partition searches the MMC partition for
locating environment data, by comparing the partition names with config
"u-boot,mmc-env-parition". However, it only compares the first word-size
bytes (size of 'const char *'), which may make the function to find
unintended partition.

Correct the function not to partially compare the partition name with
config "u-boot,mmc-env-partition".

Fixes: c9e87ba665 ("env: Save environment at the end of an MMC partition")
Signed-off-by: Hoyeonjiki Kim <jigi.kim@gmail.com>
Reviewed-by: Wolfgang Denk <wd@denx.de>
2020-11-18 13:46:58 -05:00
Heiko Schocher
46ce9e777c env: sf: fix init function behaviour
Michael wrote:
commit 92765f45bb ("env: Access Environment in SPI flashes before
relocation") at least breaks the Kontron sl28 board. I guess it also
breaks others which use a (late) SPI environment.

reason is, that env_init() sets the init bit, if there
is no init function defined in an environment driver,
and use default return value -ENOENT in this case
later for setting the default environment.

Change:
Environment driver can now implement an init
function and return, if this function does nothing,
simply -ENOENT.

env_init() now handles -ENOENT correct by setting the
inited bit for the environment driver. And if there
is no other environment driver whose init function
returns 0, load than the default environment.

This prevents that each environment driver needs to set the
default environment.

Fixes: 92765f45bb ("env: Access Environment in SPI flashes before relocation")
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> [For the SF environment]
Signed-off-by: Heiko Schocher <hs@denx.de>
2020-11-03 10:04:25 -05:00
Heiko Schocher
92765f45bb env: Access Environment in SPI flashes before relocation
Enable the new Kconfig option ENV_SPI_EARLY if you want
to use Environment in SPI flash before relocation.
Call env_init() and than you can use env_get_f() for
accessing Environment variables.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:54:38 -04:00
Heiko Schocher
1229533a2a env: split env_import_redund() into 2 functions
split from env_import_redund() the part which checks
which Environment is valid into a separate function
called env_check_redund() and call it from env_import_redund().

So env_check_redund() can be used from places which also
need to do this checks.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:54:38 -04:00
David Woodhouse
b0493bb75a env/ext4.c: allow loading from an EXT4 partition on the MMC boot device
This parallels what I added for FAT in commit 6731bef696, allowing the
environment to be found in a specific partition on the device that the
board's mmc_get_env_dev() returns. On the Banana Pi R2 that means the
device that U-Boot was loaded from; either the internal eMMC or an SD
card.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-10-14 11:16:34 -04:00
David Woodhouse
4dee3f7851 mmc: remove duplicate mmc_get_env_dev() implementations
Since it's so trivial I could just about tolerate this when there were only
two copies of it. But now there are about to be three.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-10-14 11:16:34 -04:00
Simon Glass
bc438b6e9a Kconfig: Move VERSION_VARIABLE under environment
This relates to the environment so should not be at the top level. Move
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-09 12:01:55 -04:00
Michal Simek
7fa8d5e0ee env: kconfig: Add default option for ARCH_ZYNQ
Zynq is similar to ZynqMP u-boot feature wise that's why also enable
default option for ENV_FAT_DEVICE_AND_PART Kconfig entry.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23 10:31:40 +02:00
Michal Simek
076617847a env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4
ENV_IS_IN_EXT4 also need to enable FS_EXT4 which is not covered in Kconfig.
Kconfig reports this as:
WARNING: unmet direct dependencies detected for EXT4_WRITE
  Depends on [n]: FS_EXT4 [=n]
  Selected by [y]:
  - ENV_IS_IN_EXT4 [=y] && !CHAIN_OF_TRUST [=n]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-08-27 11:26:58 -04:00
Tom Rini
7d08077334 Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMC_ENV_DEV
   CONFIG_SYS_MMC_ENV_PART

Note that with this conversion we now have consistent behavior with
respect to ensuring that we have always selected the correct MMC
device and hardware partition.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08 11:03:52 -04:00
Marek Vasut
d045cbacf2 env: Add support for explicit write access list
This option marks any U-Boot variable which does not have explicit 'w'
writeable flag set as read-only. This way the environment can be locked
down and only variables explicitly configured to be writeable can ever
be changed by either 'env import', 'env set' or loading user environment
from environment storage.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31 10:13:00 -04:00
Marek Vasut
47f3b1f243 env: Add option to only ever append environment
Add configuration option which prevents the environment hash table to be
ever cleared and reloaded with different content. This is useful in case
the first environment loaded into the hash table contains e.g. sensitive
content which must not be dropped or reloaded.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31 10:13:00 -04:00
Marek Vasut
890feecaab env: Discern environment coming from external storage
Add another custom environment flag which discerns environment coming
from external storage from environment set by U-Boot itself.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31 10:13:00 -04:00
Marek Vasut
ef9bef2bfe env: Add H_DEFAULT flag
Add another internal environment flag which indicates that the operation
is resetting the environment to the default one. This allows the env code
to discern between import of external environment and reset to default.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31 10:13:00 -04:00
Marek Vasut
0f036bf4b8 env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set
If the ENV_ACCESS_IGNORE_FORCE is set, inform user that the variable
cannot be force-set if such attempt happens.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
0718f74327 env: ext4: add support of command env erase
Add support of opts erase for env in ext4,
this opts is used by command 'env erase'.

This command only fill the env file (CONFIG_ENV_EXT4_FILE)
with 0, the CRC and the saved environment becomes invalid.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
f6de047e02 env: ext4: introduce new function env_ext4_save_buffer
Split the function env_ext4_save to prepare the erase support.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
a97d22ebba cmd: env: add env select command
Add the new command 'env select' to force the persistent storage
of environment, saved in gd->env_load_prio.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
0115dd3a6a cmd: env: add env load command
Add the new command env load to load the environment from
the current location gd->env_load_prio.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
466d9855d4 env: the ops driver load becomes mandatory in struct env_driver
The ops driver load becomes mandatory in struct env_drive,
change the comment for this ops and remove unnecessary test.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
ad3fec2364 env: nowhere: add .load ops
Add the ops .load for nowhere ENV backend to load the
default environment.

This ops is needed for the command 'env load'

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
6d8d8400a2 env: correctly handle env_load_prio
Only update gd->env_load_prio in generic function env_load()
and no more in the weak function env_get_location() which is
called in many place (for example in env_driver_lookup, even
for ENVOP_SAVE operation).

This patch is a preliminary step to use env_driver_lookup()/
env_get_location() in new function env_select() without
updating gd->env_load_prio.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
22140d16e5 env: sf: avoid space in backend name
Remove space in ENV backend name for SPI Flash (SF)
to avoid issue with env select command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
286fee5062 env: ext4: set gd->env_valid
Add a missing initialization of gd->env_valid in env_ext4_load
as it is already done in some other env device.

Set gd->env_valid = ENV_VALID in env_ext4_save() and env_ext4_load().

This patch allows to have a correct information in 'env info' command.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
87dac74012 env: add absolute path at CONFIG_ENV_EXT4_FILE
Add the absolute path to the default value of
CONFIG_ENV_EXT4_FILE = "/uboot.env".

This patch avoid the error :
  Saving Environment to EXT4... File System is consistent
  Please supply Absolute path

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Adam Ford
e91907a146 Convert CONFIG_ENV_OVERWRITE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_OVERWRITE

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rerun migration, remove some comments]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 16:18:06 -04:00
Patrick Delaunay
5d4f7b4e2a env: mmc: add redundancy support in mmc_offset_try_partition
Manage 2 copy at the end of the partition selected by config
"u-boot,mmc-env-partition" to save the U-Boot environment,
with CONFIG_ENV_SIZE and 2*CONFIG_ENV_SIZE offset.

This patch allows to support redundancy (CONFIG_ENV_OFFSET_REDUND).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
76b640c3f2 env: mmc: correct the offset returned by mmc_offset_try_partition
The output of the function mmc_offset_try_partition must be a
byte offset in mmc and not a multiple of blksz.

This function is used in mmc_offset(), called by mmc_get_env_addr()
and the offset is used in write_env(), erase_env() and read_env().

In these function, blk_start = offset / mmc->read_bl_len
or /write_bl_len so this offset is not a multiple of blksz.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
2b2f727500 env: mmc: allow support of mmc_get_env_dev with OF_CONTROL
Use the weak function mmc_get_env_dev in mmc_offset_try_partition
function to allow dynamic selection of mmc device to use
and no more use directly the define CONFIG_SYS_MMC_ENV_DEV.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
8968288cb4 env: add failing trace in env_save
Add trace in env save to indicate any errors to end user and avoid
silent output when the command 'env save' is not executed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
d5a6a5a927 env: correct overflow check of env_has_init size
Correct the overflow check of the bit-field env_has_init with
the max value of env_location= ENVL_COUNT and no more with the
size of env_locations.

This bit-field is indexed by this enumerate and not by the position in
the env_locations (only used in env_get_location) and the
2 values are different, depending of thea ctivated CONFIG_ENV_IS_ options.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
David Woodhouse
6731bef696 env/fat.c: allow loading from a FAT partition on the MMC boot device
I don't want to have to specify the device; only the partition.

This allows me to use the same image on internal eMMC or SD card for
Banana Pi R2, and it finds its own environment either way.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
[trini: Add #if/#else/#endif logic around CONFIG_SYS_MMC_ENV_DEV usage,
        whitespace changes]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-26 14:35:12 -04:00
Lukasz Majewski
56c4046038 spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*
This change allows more fine tuning of driver model based SPI support in
SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI
support in SPL and TPL via Kconfig option.

Before this change it was necessary to use:
    /* SPI Flash Configs */
    #if defined(CONFIG_SPL_BUILD)
    #undef CONFIG_DM_SPI
    #undef CONFIG_DM_SPI_FLASH
    #undef CONFIG_SPI_FLASH_MTD
    #endif

in the ./include/configs/<board>.h, which is error prone and shall be
avoided when we strive to switch to Kconfig.

The goal of this patch:

Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL).
Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must
still support non DM driver.

Another use case is the conversion of non DM/DTS SPI driver to support
DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the
distinction is needed in Kconfig (also if SPL version of the driver
supports OF_PLATDATA).

In the end of the day one would have to support following use cases (in
single driver file - e.g. mxs_spi.c):

- U-Boot proper driver supporting DT/DTS
- U-Boot proper driver without DT/DTS support (deprecated)
- SPL driver without DT/DTS support
- SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to
  run full blown DT/DTS)
- SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained
  environment with no fitImage and OF_LIBFDT support).

Some boards do require SPI support (with DM) in SPL (TPL) and some only
have DM_SPI{_FLASH} defined to allow compiling SPL.

This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI)
and provides corresponding defines in Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[trini: Fixup a few platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29 13:34:43 -04:00
Patrick Delaunay
35c2683f46 env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR
Update the comment for SYS_RELOC_GD_ENV_ADDR as gd->env_addr is updated
in board_r.c::initr_reloc_global_data() under the compilation flags
CONFIG_SYS_RELOC_GD_ENV_ADDR

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-15 11:24:36 -04:00
Jagan Teki
c8cbf1707c env: sf: Free the old env_flash
env_flash is a global flash pointer, and the probe would
happen only if env_flash is NULL, but there is no checking
and free the pointer if is not NULL.

So, this patch frees the old env_flash, and get the probed
flash in to env_flash pointer and finally check if is not NULL.

Cc: Simon Glass <sjg@chromium.org>
Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01 17:55:24 +05:30