Commit Graph

46412 Commits

Author SHA1 Message Date
Simon Glass
4d68604189 dm: gpio: Add a comment about not copying some drivers
These three drivers all use U_BOOT_DEVICE rather than device tree to
create devices, so have to do manual allocation of platform data. This is
not true for new platforms.

Add a more explicit comment so that people do not copy this approach with
new boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08 20:41:08 -06:00
Simon Glass
1ba214767d dm: gpio: vybrid_gpio: Correct driver's use of bind() method
It does not look like this driver needs to use a bind() method. It does
not manually create devices with device_bind() nor does it create devices
using U_BOOT_DEVICE(). It seems to only use device tree.

Therefore the manual allocation of platform data is not needed and is
confusing. Also platform data should be set up by the ofdata_to_platdata()
method, not bind().

Update the driver in case others use it as a model in future.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08 20:08:19 -06:00
Rob Clark
085391b223 test: print_ut: Add test for %ls strings
Add a simple test for long strings.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08 20:08:19 -06:00
Tom Rini
0d3aaa35b8 Travis-CI: Fix microblaze and xilinx jobs
Given how we handle the ARM toolchain we can't easily combine these two
jobs, so don't.  Give xilinx/ARM a separate build.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-07 15:54:18 -04:00
Tom Rini
bf52fcdef4 cmd/gpt.c, cmd/nvedit.c, tools/fit_image.c: Rework recent fixes for Coverity
The recent changes to these files did not completely fix the previous
issues, or introduced different (minor) issues.  In cmd/gpt.c we need to
dereference str_disk_guid to be sure that malloc worked.  In
cmd/nvedit.c we need to be careful that we can also fit in that leading
space when adding to the string.  And in tools/fit_image.c we need to
re-work the error handling slightly in fit_import_data() so that we only
call munmap() once.  We have two error paths here, one where we have an
fd to close and one where we do not.  Adjust labels to match this.

Reported-by: Coverity (CID: 167366, 167367, 167370)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-07 11:27:59 -04:00
Tom Rini
83e92f79d3 Merge git://git.denx.de/u-boot-x86 2017-10-07 09:12:04 -04:00
Andy Shevchenko
256df1e1c6 x86: edison: Bring minimal ACPI support to the board
This board is based on Intel Tangier SoC (Intel Merrifield platform)
and may utilize ACPI powerfulness.

Bring minimum support by appending initial DSDT table for it.

Note, the addresses for generated tables are carefully chosen to avoid
any conflicts with existing shadowed BIOS data. The user have somewhat
like ~31 kB available for compiled ACPI tables that ought to be enough.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-10-07 15:07:59 +08:00
Andy Shevchenko
39665beed6 x86: tangier: Enable ACPI support for Intel Tangier
Intel Tangier SoC is a part of Intel Merrifield platform which doesn't
utilize ACPI by default. Here is an attempt to unleash ACPI flexibility
power on Intel Merrifield based platforms.

The change brings minimum support of the devices that found on
Intel Merrifield based end user device.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-07 15:07:59 +08:00
Stefan Roese
b6519b777d x86: theadorable-x86-xxx_defconfig: Enable setexpr command
The setexpr command is useful for scripting, lets enable it for all
x86 based theadorable platforms.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-07 12:06:27 +08:00
Stefan Roese
70e6c8c65a x86: theadorable-x86-common: Move "-generic" into kernel-ver variable
This enables the easier usage of "-custom" kernel versions as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-07 12:06:27 +08:00
Stefan Roese
43c9841042 x86: theadorable-x86-common: Add further pci hotplug cmdline parameters
This is needed for the PCIe hotplug to work correctly on some boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-07 12:06:27 +08:00
Tom Rini
afbdfd829f Travis-CI: Split out more vendors from the catch-all ARM job
- Move SoCFPGA and K2 boards to their own job
- Expand the microblaze job to cover ARM boards from Xilinx as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 16:37:06 -04:00
Tom Rini
575e1607d3 Travis-CI: Move Boundary and Engicam devices to their own jobs
The i.MX6 job can still be close to the time limit, move a few more
devices out.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 16:27:42 -04:00
Tom Rini
bc3eed965f Travis-CI: Move Toradex into its own job
A few of the big jobs are getting close to the time limit again, split a
few more things out.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:23 -04:00
Tom Rini
fa9ca8a5d2 fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls
As reported by Coverity, we did not free dirnode in the case of failure.
Do so now.

Reported-by: Coverity (CID: 131221)
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:22 -04:00
Tom Rini
3c2dff5490 tools/fit_image.c: Update some return code paths
Coverity has found some problems with the return paths in parts of this
code.  We have a case where we were going to the wrong part of the
unwind (open() failed so we cannot close the fd), a case where we were
only free()ing our buf on the error path and finally a case where we did
not munmap in the failure path.

Reported-by: Coverity (CID: 138492, 138495, 143064)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:22 -04:00
Tom Rini
146dda3911 cmd/time.c: Initialize 'repeatable' variable
We cannot leave this uninitialized, set it to 0.

Reported-by: Coverity (CID: 144426)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:21 -04:00
Tom Rini
48ee0a87bc cmd/pxe.c: Rework initrd and bootargs handling slightly
For the initrd portion of handling our bootm arguments we do not have a
sufficiently long enough buffer for some improbable 64bit cases.  Expand
this buffer to allow for a 64bit address and almost 256MB initrd to be
used.  Make use of strncpy/strncat when constructing the values here
since we know what the worst case valid values are, length wise.

Similarly for bootargs themselves, we need to make use of strlen/sizeof
and strncpy/strncat to ensure that we don't overflow bootargs itself.

Cc: Simon Glass <sjg@chromium.org>
Cc: Alexander Graf <agraf@suse.de>
Reported-by: Coverity (CID: 131256)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:21 -04:00
Tom Rini
c667723ffb cmd/nvedit.c: Update input handling to cover overflow cases
When we have multiple messages provided, we need to be sure that we do
not exceed the length of our 'message' buffer.  In the for loop, make
sure that pos is not larger than message.  Only copy in at most however
much of the message buffer remains.  Finally, if we have not reached the
end of the message buffer, put in a space and NULL, and if we have,
ensure the buffer is now NULL termined.

Reported-by: Coverity (CID: 165116)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:21 -04:00
Tom Rini
e2e6daed5a test/dm: Fix string handling issues in the eth test
Coverity scan has identified potential buffer overruns in these tests.
Correct this by zeroing our buffer and using strncpy not strcpy.

Reported-by: Coverity (CID: 155462, 155463)
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2017-10-06 11:28:20 -04:00
Tom Rini
d91062c41e test/overlay: Fix various malloc/free leaks
With the overlay tests now being built in sandbox Coverity has found a
number of issues in the tests.  In short, if malloc ever failed we would
leak the previous mallocs, so we need to do the usual goto pattern to
free each in turn.  Finally, we always looked at the free()d location to
see how many tests had failed for the return code.

Reported-by: Coverity (CID: 167224, 167227, 167230, 167236)
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:20 -04:00
Alison Chaiken
18030d04d2 GPT: fix memory leaks identified by Coverity
Create a common exit for most of the error handling code in
do_rename_gpt_parts.   Delete the list elements in disk_partitions
before calling INIT_LIST_HEAD from get_gpt_info() a second time.

The SIZEOF_MISMATCH error is not addressed, since that problem was
already fixed by "GPT: incomplete initialization in
allocate_disk_part".

Signed-off-by: Alison Chaiken <alison@peloton-tech.com>
Reported-by: Coverity (CID: 167222, 167235, 167237)
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:19 -04:00
Tuomas Tynkkynen
7c890f149d fs-test: Add test for a filename using '..' to go back to the root
The previous commit fixed a problem in FAT code where going back to the
root directory using '..' wouldn't work correctly on FAT12 or FAT16.
Add a test to exercise this case (which was once fixed in commit
18a10d46f2 "fat: handle paths that include ../" but reintroduced due to
the directory iterator refactoring).

This test only very barely catches the problem - without the fix the
size command still gives valid output but the additional spurious
"Invalid FAT entry" error message makes it not get caught in the
'egrep -A3 ' output. I tried to make a proper test that grows the root
directory to two clusters lots of with dummy files but that causes the
write tests to crash the sandbox totally...

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:19 -04:00
Tuomas Tynkkynen
8df8731474 fs/fat: Fix pathnames using '..' that lead to the root directory
If we end up back in the root directory via a '..' directory entry, set
itr->is_root accordingly. Failing to do that gives spews like
"Invalid FAT entry" and being unable to access directory entries located
past the first cluster of the root directory.

Fixes: 8eafae209c ("fat/fs: convert to directory iterators")
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:19 -04:00
Tuomas Tynkkynen
edce588a45 fs-test: Add FAT16 support
Currently we can only test FAT32 which is the default FAT version that
mkfs.vfat creates by default. Instead make it explicitly create either a
FAT16 or a FAT32 volume. This allows us to exercise more code, for
instance the root directory handling is done differently in FAT32 than
the older FATs.

Adding FAT12 support is a much bigger job since the test creates a 2.5GB
file and the FAT12 maximum partition size is way smaller than that.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-06 11:28:18 -04:00
Tuomas Tynkkynen
385b731855 fs/ext4: Fix group descriptor checksum calculation
The current code doesn't compute the group descriptor checksum correctly
for the filesystems that e2fsprogs 1.43.4 creates (they have
'Group descriptor size: 64' as reported by tune2fs). Extend the checksum
calculation to be done as ext4_group_desc_csum() does in Linux.

This fixes these errors in dmesg from running fs-test.sh and makes it
succeed again:

[1671902.620699] EXT4-fs (loop1): ext4_check_descriptors: Checksum for group 0 failed (35782!=10965)
[1671902.620706] EXT4-fs (loop1): group descriptors corrupted!

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:18 -04:00
Felix Brack
bd2259e3c4 doc: Fix statements on case sensitivity for regulator prefix
The regulator bindings state that regulator prefixes are allowd to be
in upper or lower case. However pmic_bind_children from pmic_uclass uses
strncmp to compare DT node name against prefix. This comparison is case
sensitive hence the regulator driver prefix case matters.

Signed-off-by: Felix Brack <fb@ltec.ch>
2017-10-06 11:28:17 -04:00
Sam Protsenko
268577669a omap: Fix warning when looking for userdata part
When eMMC was formattaed for Linux partition table, "userdata" partition
is missing. In this case, part_get_info_by_name() iterates over all
registered drivers (which are PART_TYPE_EFI, PART_TYPE_DOS and
PART_TYPE_ISO). And when it comes to PART_TYPE_ISO (which has empty
partition table), we can see next warning in U-Boot output:

    ** First descriptor is NOT a primary desc on 1:1 **

This patch switches to part_get_info_by_name_type() API in order to
check only EFI partitions for "userdata" partitions. This eliminates
mentioned warning.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-06 11:28:17 -04:00
Sam Protsenko
3078909556 disk: Provide API to get partition by name for specific type
There is already existing function part_get_info_by_name().
But sometimes user is particularly interested in looking for only
specific partition type. This patch implements such an API that
provides partition searching by name for specified partition type.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-06 11:28:17 -04:00
Sam Protsenko
19d141a0f9 omap: Omit fastboot.userdata_size related errors
When using regular $partitions variable (for Linux boot), we can see
some unwanted messages:

> ERROR: cannot find partition: 'userdata'

> at arch/arm/mach-omap2/utils.c:96/omap_mmc_get_part_size()
> Warning: fastboot.userdata_size: unable to calc

Let's remove those, as missing 'userdata' partition is correct behavior
for Linux partition, and we don't want to see some Android-related
messages in this case.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-10-06 11:28:16 -04:00
Tuomas Tynkkynen
7b09dffc3b travis.yml: Add job for running test.py in qemu_arm
Note that this commit requires
https://github.com/swarren/uboot-test-hooks/pull/14 to go in first.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:16 -04:00
Tuomas Tynkkynen
32f1182926 ARM: Add a new arch + board for QEMU's 'virt' machine
This board builds an U-Boot binary that is bootable with QEMU's 'virt'
machine on ARM. The minimal QEMU command line is:

    qemu-system-arm -machine virt,highmem=off -bios u-boot.bin

(Note that the 'highmem=off' parameter to the 'virt' machine is required for
PCI to work in U-Boot.) This command line enables the following:
    - u-boot.bin loaded and executing in the emulated flash at address 0x0
    - A generated device tree blob placed at the start of RAM
    - A freely configurable amount of RAM, described by the DTB
    - A PL011 serial port, discoverable via the DTB
    - An ARMv7 architected timer
    - PSCI for rebooting the system
    - A generic ECAM-based PCI host controller, discoverable via the DTB

Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus.
The following ones are supported by both U-Boot and Linux:

- To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.:
    -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0
- To add an Intel E1000 network adapter, pass e.g.:
    -net nic,model=e1000 -net user
- To add an EHCI-compliant USB host controller, pass e.g.:
    -device usb-ehci,id=ehci
- To add a NVMe disk, pass e.g.:
    -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-06 11:28:16 -04:00
Tuomas Tynkkynen
3675cb044e PCI: Add driver for a 'pci-host-ecam-generic' host controller
QEMU emulates such a device with '-machine virt,highmem=off' on ARM.
The 'highmem=off' part is required for things to work as the PCI code
in U-Boot doesn't seem to support 64-bit BARs.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-06 11:28:12 -04:00
Tuomas Tynkkynen
e434a90ec4 pci: layerscape: Use pci_generic_mmap_{read, write}_config
Use the new helpers to avoid boilerplate in the driver.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-06 11:27:41 -04:00
Tuomas Tynkkynen
75e3feac1b pci: xilinx: Use pci_generic_mmap_{read, write}_config()
Use the new helper function to avoid boilerplate in the driver.

Note that this changes __raw_writel et al. to writel. AFAICT this is
no problem because:

- The Linux driver for the same hardware uses the non-__raw variants as
  well (via pci_generic_config_write()).
- This driver seems to be used only on MIPS so far, where the __raw and
  non-__raw accessors are the same.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-06 11:27:41 -04:00
Tuomas Tynkkynen
badb99220a pci: Add helper for implementing memory-mapped config space accesses
This sort of pattern for implementing memory-mapped PCI config space
accesses appears in U-Boot twice already, and a third user is coming up.
So add helper functions to avoid code duplication, similar to how Linux
has pci_generic_config_write and pci_generic_config_read.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-06 11:27:40 -04:00
Jean-Jacques Hiblot
a4d72869f8 omap: detect board before spl_early_init()
In order to be able to select the right DTB, we need to have identified the
board before spl_early_init() is called.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-06 11:27:40 -04:00
Jean-Jacques Hiblot
2f57c95100 spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
u-boot can be embedded within a FIT image with multiple DTBs. It then
selects at run-time  which one is best suited for the platform.
Use the same principle here for the SPL: put the DTBs in a FIT image,
compress it (LZO, GZIP, or no compression) and append it at the end of the
SPL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the
default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c
it's unused.]
Signed-off-by Tom Rini <trini@konsulko.com>
2017-10-06 11:26:41 -04:00
Jean-Jacques Hiblot
035d64025c fdtdec: sort include files
Sort include files in accordance to U-Boot coding style.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-10-05 21:31:04 -04:00
Jean-Jacques Hiblot
f52bdf4b67 lib: allow building lzo for the SPL
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Jean-Jacques Hiblot
376ddf9d4a gzip: add a function to parse the header
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Jean-Jacques Hiblot
d753f942ec lzo: add a function to check the validity of the header
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Jean-Jacques Hiblot
02035d0086 fit: If no matching config is found in fit_find_config_node(), use the default one
If board_fit_config_name_match() doesn't match any configuration node,
then use the default one (if provided).

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Jean-Jacques Hiblot
d56b86eec3 fit: fixed bug in locate_dtb_in_fit()
If the dtb is the first data of the FIT, the its offset is 0x0. Change the
test to '<' instead of '<='

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Jean-Jacques Hiblot
906a9dbbcb fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()
Those 2 functions don't modify their input, we can mark it const.
This prevents compilation warnings when they are provided const input.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Jean-Jacques Hiblot
11955590a2 dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig
CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it
MULTI_DTB_FIT as it is able to get a DTB from a FIT image containing
multiple DTBs. Also move the option to the Kconfig dedicated to the DTS
options and create a README for this feature.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Masahiro Yamada
84570a0c11 linux/kernel.h: import DIV_ROUND_{DOWN, UP}_ULL from Linux
These macros are useful to avoid link error on 32-bit systems.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-05 21:31:04 -04:00
Fabio Estevam
3ea0520512 disk: part_dos: Use the original allocation scheme for the SPL case
Since commit ff98cb9051 ("part: extract MBR signature from partitions")
SPL boot on i.MX6 starts to fail:

U-Boot SPL 2017.09-00221-g0d6ab32 (Oct 02 2017 - 15:13:19)
Trying to boot from MMC1
(keep in loop)

Use the original allocation scheme for the SPL case, so that MX6 boards
can boot again.

This is a temporary solution to avoid the boot regression.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2017-10-05 10:45:33 -04:00
Tom Rini
4f42a0d721 Merge git://git.denx.de/u-boot-sunxi 2017-10-05 08:26:36 -04:00
Tom Rini
6a3e65dea3 common: Drop LOGLEVEL to 4
While this came in with a default value of 6 I am lowering this to 4.
The MTD/UBI code has a large number of error messages that we include
now.  In addition, "normally" warning messages are not included so this
feels like a more natural level to have.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-05 08:25:18 -04:00