Commit Graph

21 Commits

Author SHA1 Message Date
Suriyan Ramasami
48aead71c1 fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined
The boot commands - bootz/bootm mandate a third argument which is the
address to the FDT blob. In cases where this argument is not specified,
boot fails with a message indicating a missing FDT.

This causes non-FDT kernels to fail to boot. This patch allows both FDT
and non-FDT kernels to boot by making the third parameter to the bootm/bootz
optional.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
[trini: Update again for covering appended DTB case after last revert in
this area]
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-08 09:35:47 -05:00
Tom Rini
f0c6e1c31b Revert "image-fdt: boot_get_fdt() return value when no DTB exists"
It has been found that this change breaks the case of an appended device
tree file, so for the problem in question some other solution must be
found.

This reverts commit c6150aaf2f.

Reported-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Reported-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Confirmed-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-03 13:19:34 -05:00
Simon Glass
c654b5172a fdt: Add ft_system_setup() function for system device tree additions
Add an additional function for adding information to the device tree before
booting. This permits additions which are not board-specific.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:18 +01:00
Simon Glass
6f4dbc21e4 fdt: Tidy up error handling in image_setup_libfdt()
The message about needing to reset should be printed no matter what error
is printed. Also, an error should always be printed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:17 +01:00
Noam Camus
c6150aaf2f image-fdt: boot_get_fdt() return value when no DTB exists
I believe that when no DTB is around we should return 1.
This why I fixed such scenarious to not return zero anymore.
Else kernel might get NULL pointer to DTB which doesn't exists.

Signed-off-by: Noam Camus <noamc@ezchip.com>
2014-11-07 16:27:05 -05:00
Simon Glass
5bf58ccc8e fdt: Rename fdt_resize() to fdt_shrink_to_minimum()
Since libfdt now has an fdt_resize() function, we need to rename the
U-Boot one.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09 11:17:03 -04:00
Ma Haijun
e29607ed97 ARM: convert arch_fixup_memory_node to a generic FDT fixup function
Some architecture needs extra device tree setup. Instead of adding
yet another hook, convert arch_fixup_memory_node to be a generic
FDT fixup function.

[maz: collapsed 3 patches into one, rewrote commit message]

Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-28 17:19:49 +02:00
Khoronzhuk, Ivan
7c38764606 keystone2: use CONFIG_SOC_KEYSTONE in common places
Use CONFIG_SOC_KEYSTONE in common places instead of defining
a lot of "if def .. || if def " for different Keystone2 SoC types.

Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-07-25 16:26:11 -04:00
Simon Glass
126cc86420 image: Remove the fit_load_image() property parameter
This can be obtained by looking up the image type, so is redundant. It is
better to centralise this lookup to avoid errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:18:59 -04:00
Masahiro Yamada
bc6ed0f9dc fdt_support: delete force argument of fdt_chosen()
After all, we have realized "force" argument is completely
useless. fdt_chosen() was always called with force = 1.

We should always want to do the same thing
(set appropriate value to the property)
even if the property already exists.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:18:48 -04:00
Masahiro Yamada
dbe963ae51 fdt_support: delete force argument of fdt_initrd()
After all, we have realized "force" argument is completely
useless. fdt_initrd() was always called with force = 1.

We should always want to do the same thing
(set appropriate value to the property)
even if the property already exists.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:18:47 -04:00
Heiko Schocher
21d29f7f9f bootm: make use of legacy image format configurable
make the use of legacy image format configurable through
the config define CONFIG_IMAGE_FORMAT_LEGACY.

When relying on signed FIT images with required signature check
the legacy image format should be disabled. Therefore introduce
this new define and enable legacy image format if CONFIG_FIT_SIGNATURE
is not set. If CONFIG_FIT_SIGNATURE is set disable per default
the legacy image format.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Lars Steubesand <lars.steubesand@philips.com>
Cc: Mike Pearce <mike@kaew.be>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Simon Glass <sjg@chromium.org>
2014-06-05 14:44:56 -04:00
Vitaly Andrianov
00c200f137 fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()
The keystone2 SOC requires to fix all 32 bit aliased addresses
to their 36 physical format. This has to happen after all fdt
nodes are added or modified.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Tom Rini <trini@ti.com>
2014-04-17 17:24:38 -04:00
Masahiro Yamada
95f7062710 fdt: rename IMAAGE_OF_BOARD_SETUP to IMAGE_OF_BOARD_SETUP
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 10:47:30 -05:00
Masahiro Yamada
2f0877c7f4 FIT: delete unnecessary casts
Becuase fdt_check_header function takes (const void *)
type argument, the argument should be passed to it
without being casted to (char *).

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-09-20 10:30:54 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Simon Glass
f320a4d845 bootm: Use selected configuration for ramdisk and fdt
If a specific configuraion is selected by the bootm command, e.g. with
'bootm 84000000#recoveryconf' we must honour this for not just the kernel,
but also the ramdisk and FDT.

In the conversion to using a common fit_image_load() function for loading
images from FITs (commits a51ec63 and 53f375f) this feature was lost.
Reinstate it by passing the selected configuration back from
fit_image_load() to boot_get_kernel(), then use this configuration
(which is stored in images->fit_uname_cfg) in both boot_get_ramdisk()
and boot_get_fdt().

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-07-12 10:32:39 -04:00
Simon Glass
983c72f479 Clarify bootm OS arguments
At present the arguments to bootm are processed in a somewhat confusing
way. Sub-functions must know how many arguments their calling functions
have processed, and the OS boot function must also have this information.
Also it isn't obvious that 'bootm' and 'bootm start' provide arguments in
the same way.

Adjust the code so that arguments are removed from the list before calling
a sub-function. This means that all functions can know that argv[0] is the
first argument of which they need to take notice.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:16:41 -04:00
Simon Glass
53f375fa81 image: Use fit_image_load() to load FDT
Use the new common code to load a flat device tree. Also fix up a few casts
so that this code works with sandbox. Other than that the functionality
should not change.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-04 16:06:31 -04:00
Simon Glass
13d06981a9 image: Add device tree setup to image library
This seems to be a common function for several architectures, so create
a common function rather than duplicating the code in each arch.

Also make an attempt to avoid introducing #ifdefs in the new code, partly
by removing useless #ifdefs around function declarations in the image.h
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-14 15:37:25 -04:00
Simon Glass
44d3a3066b image: Split libfdt code into image-fdt.c
The image file is still very large, and some of the code is only used when
libfdt is in use. Move this code into a new file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-14 15:37:25 -04:00