The difference between the bytes and str types in Python 3 requires a
number of minor changes to this function. Update it to handle the input
data using the 'bytes' type. Create two useful helper functions which can
be used by other modules too.
Signed-off-by: Simon Glass <sjg@chromium.org>
This method does not actually use any members of the Prop class. Move it
out of the class so that it is easier to add unit tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the order of struct field emitted by this tool depends on the
internal workings of a Python dictionary. Sort the fields to remove this
uncertainty, so that tests are deterministic.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update a few things in this tool so that they support Python 3:
- print statements
- iteritems()
- xrange()
Signed-off-by: Simon Glass <sjg@chromium.org>
Change the code so that it works on both Python 2 and Python 3. This works
by using unicode instead of latin1 for the test input, and ensuring that
the output is converted to a string rather than a unicode object on
Python 2.
Signed-off-by: Simon Glass <sjg@chromium.org>
The unicode type does not exist in Python 3 and when displaying strings
they do not have the 'u' prefix. Adjusts the settings unit tests to deal
with this difference, by converting the comparison value to a string, thus
dropping the 'u'.
Signed-off-by: Simon Glass <sjg@chromium.org>
We use sets to produce the list of To and Cc lines for a series. This does
not result in stable ordering of the recipients. Sort each list to ensure
that the output is repeatable. This is necessary for tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Create helper functions in the tools module to deal with the differences
between unicode in Python 2 (where we use the 'unicode' type) and Python 3
(where we use the 'str' type).
Signed-off-by: Simon Glass <sjg@chromium.org>
The method of multiplying a character by a number works well for creating
a repeated string in Python 2. But in Python 3 we need to use bytes()
instead, to avoid unicode problems, since 'bytes' is no-longer just an
alias of 'str'.
Create a function to handle this detail and call it from the relevant
places in binman.
Signed-off-by: Simon Glass <sjg@chromium.org>
The lz4 utility inserts binary data in its output which cannot always be
converted to unicode (nor should it be). Fix this by using the new binary
mode for program output.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present cros_subprocess and the tools library use a string to obtain
stdout from a program. This works fine on Python 2. With Python 3 we end
up with unicode errors in some cases. Fix this by providing a binary mode,
which returns the data as bytes() instead of a string.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present some files are opened in text mode despite containing binary
data. This works on Python 2 but not always on Python 3, due to unicode
problems. BC&D are not my favourite people. Adjust the affected open()
statements to use binary mode.
Signed-off-by: Simon Glass <sjg@chromium.org>
Python 3 requires this, and Python 2 allows it. Convert the code over to
ensure compatibility with Python 3.
Signed-off-by: Simon Glass <sjg@chromium.org>
Python 3 requires this, and Python 2 allows it. Convert the code over to
ensure compatibility with Python 3.
Signed-off-by: Simon Glass <sjg@chromium.org>
An unfortunate new feature in Python 3.5 causes binman to print errors for
non-existent tests, when the test filter is used. Work around this by
detecting the unwanted tests and removing them from the result.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this function uses lists and strings. This does not work so
well with Python 3, and testing against '' does not work for a bytearray.
Update the code to fix these issues.
Signed-off-by: Simon Glass <sjg@chromium.org>
The base of DRAM will be changed for the next generation SoC.
The addresses needed for booting the kernel should be shifted
according to the DRAM base.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The base of DRAM will be changed for the next generation SoC.
Set the base address to the 'dram_base' environment variable, which
will be useful for scripting.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The base of DRAM will be changed for the next generation SoC.
To support it along with existing SoCs in the single defconfig,
set 'loadaddr' at boot-time by adding the offset to the DRAM base.
CONFIG_SYS_LOAD_ADDR is still hard-coded for compilation, but the
value from environment variable 'loadaddr' should be used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The base address of DRAM was 0x80000000 for all the ARM SoCs of this
family in the past. It will be changed to 0x20000000 for a planned new
SoC. To support multiple SoCs by the single uniphier_v8_defconfig, the
base must be run-time determined.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, mem_map is hard-coded, and it worked well until the last
SoC. For a planned new SoC, the addresses of peripherals and DRAM
will be changed. Set it up run-time.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, dram_init() code relies on the fact the DRAM size
configuration exists in the SG_MEMCONF register.
This will no longer be true for a planned new SoC, which will
replace SG_MEMCONF with a different register.
Refactor the hook in a more generic way.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Until the last SoC, the register addresses have been hard-coded because
they are always constant. For a planned new SoC, the register bases
will be completely changed. I insist on supporting multiple SoCs/boards
by a single defconfig (uniphier_v8_defconfig) since duplicating similar
defconfig files is a maintenance burden. The base addresses must be
fixed-up at run-time somehow.
Previously, the board init code identified the SoC by reading out the
SG_REVISION register. This is much easier than parsing DT.
You cannot do it any more because the base address of SG will be
changed. The SG_REVISION register exists to read out the SoC ID, but
you never know its address before identifying the SoC. Oh well.
So, the possible solution is to parse the DT, and find out the node
with "*-soc-glue" compatible string. Then, sg_base is set to the value
of the "reg" property. The sc_base is set up likewise.
It is worth noting a pit-fall. Having sc_base and sg_base in the global
scope will make the life easier, but the global variables are poorly
supported before the relocation. In fact, the .bss section overwraps
with DT. Allocating them in the .bss section would break DT. So, I gave
dummy initializers to assign them in the .data section.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The SC_* macros represent the address of SysCtrl registers.
For a planned new SoC, its base address will be changed.
Turn the SC_* macros into the offset from the base address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The SG_* macros represent the address of SoC-glue registers.
For a planned new SoC, its base address will be changed.
Turn the SG_* macros into the offset from the base address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The planned new SoC does not have SBC (System Bus Controller) block.
Make boot_is_swapped() an optional hook.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If CONFIG_MICRO_SUPPORT_CARD is enabled, U-Boot initialize SBC
(System Bus Controller), which may not be really necessary.
Check the "socionext,uniphier-system-bus" node in DT run-time.
If and only if it is found and its "status" property is okay,
initialize the SBC block.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If CONFIG_MICRO_SUPPORT_CARD is enabled, U-Boot tries to get access
to the devices on the support card, which may not actually exist.
Check the DT and search for the on-board devices run-time. If the
nodes are not found in DT, then disable the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This file calls readl(), so needs to include <linux/io.h>.
Currently, it relies on someone else including it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that 64-bit SoCs of this SoC family no longer support SPL,
this Makefile can be slightly simpler.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The .boot_device_fixup() is only called by SPL.
Now that 64-bit SoCs of this SoC family no longer support SPL,
debug-uart-ld20.c is never compiled.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This is a remnant of commit f89d6133ee ("configs: move
CONFIG_SPL_TEXT_BASE to Kconfig").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[ Linux commit aa38571246c6ac279ebebd141157297bcb959d76 ]
The memory regions specified by /memreserve/ are passed to
early_init_dt_reserve_memory_arch() with nomap=false, so it is
not suitable for reserving memory for Trusted Firmware-A etc.
Use the more robust /reserved-memory node with the no-map property
to prevent the kernel from mapping it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
