Commit Graph

26 Commits

Author SHA1 Message Date
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
288b29e44d common: Move command functions out of common.h
Move these functions into the command.h header file which is a better fit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:02 -05:00
Simon Glass
7b51b576d6 env: Move env_get() to env.h
Move env_get() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Leo Ruan
d500683691 splash: Load internal and external data from FIT
The FIT image could contain the splash data in 3 different structure:
- The splash data is embedded in FIT image (internal)
  In this case, the property 'data' presents in FIT image header. And
  internal information 'start' and 'end' represent the location and
  size of splash data inside of FIT image.
- The splash data is external with absolute position in FIT image
  This case is made by 'mkimage -p [pos]'. The splash data is stored
  at the absolute position. Instead the property 'data', the properties
  'data-position' and 'data-size' are used to specify the location and
  size of the splash data.
- the splash data is external with relative offset in FIT image
  This case is made by 'mkimage -E'. The splash data is placed after
  the FIT image header with 4 byte alignment. Instead the property
  'data', the properties 'data-offset' and 'data-size' are used to
  specify the location and size of the splash data.

Currently, the splash only support to load external data with relative
offset from FIT image. This commit make it possible to load the splash
data embedded in FIT image or the external data with absolute position

This inspiration comes from Simon Glass <sjg@chromium.org>, see
common/spl_fit.c

Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2019-05-20 11:56:41 +02:00
Leo Ruan
3d92f31762 splash: Use splashfile instead of location->name
The splash image could be loaded from different sources (e.g. sf, mmc)
with different formats (e.g. raw, file-system). These sources are
structured by a board dependent object 'splash_location'. To decide
where is the splash image loaded, following environment variables are
used to select the splash source and file:
- 'splashsource' is used to select the splash source by setting its
  value to specified name of splash location.
- 'splashfile' specify the name of splash image file

But, when loads the splash image from FIT, the name of splash image
within FIT is specified by splash location name. Due to the splash
location name is already used for the splash source, its name may
conflicts with the name of splash image.

To solve the conflict, the environment variable 'splashfile' is used
to specify the splash image in FIT, and keeps the splash location
name for the splash source.

Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Tomas Melin <tomas.melin@vaisala.com>
2019-05-20 11:55:42 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Niko Mauno
a7126edcb3 splash_source: Verify FIT magic
Before reading entire FIT image, add sanity check by testing image
header against FDT_MAGIC. This should help avoid problems in situations
where FIT is not yet available from storage device, for example when
performing initial programming of device.

Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Tomas Melin <tomas.melin@vaisala.com>
2017-09-04 23:53:47 +02:00
Tom Rini
9493d05a41 Revert "Merge git://git.denx.de/u-boot-video"
This reverts commit 1d20170467, reversing
changes made to 6aee2ab68c.

The mxc_ipuv3_fb.c changes introduce build failures on some targets.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-01 16:17:17 -04:00
Niko Mauno
22aa21dba4 splash_source: Verify FIT magic
Before reading entire FIT image, add sanity check by testing image
header against FDT_MAGIC. This should help avoid problems in situations
where FIT is not yet available from storage device, for example when
performing initial programming of device.

Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Tomas Melin <tomas.melin@vaisala.com>
2017-08-29 00:20:16 +02:00
Tom Rini
1fdafb2e3d Merge branch 'master' of git://git.denx.de/u-boot-mmc 2017-08-18 18:24:36 -04:00
Simon Glass
f19f1ecb60 dm: sata: Support driver model with the 'sata' command
Update this command to support driver model. This has a different way of
starting and stopping SATA.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17 16:44:17 +09:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Grygorii Strashko
edba8cc4f3 common: use get_nand_dev_by_index()
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-07-11 22:41:46 -04:00
Simon Glass
10e40d54b3 Kconfig: Add CONFIG_SATA to enable SATA
At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Jonathan Golder
3cc6e7070d splash: Prevent splash_load_fs from writing to 0x0
Passing NULL to fs_read() for actread value results in hanging U-Boot
at least on our ARM plattform (TI AM335x). Since fs_read() and
following functions do not catch nullpointers, writing to 0x0 occurs.

Passing a local dummy var instead of NULL solves this issue.

Signed-off-by: Jonathan Golder <jonathan.golder@kurz-elektronik.de>
Cc: Anatolij Gustschin <agust@denx.de>
2017-02-27 16:08:06 +01:00
tomas.melin@vaisala.com
3b593f9030 splash: fix splash source flags check
SPLASH_STORAGE_RAW is defined as 0, so a check against & will
never be true. These flags are never combined so do a check
against == instead.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-13 20:45:25 +01:00
tomas.melin@vaisala.com
db1b79b886 splash: add support for loading splash from a FIT image
Enable support for loading a splash image from within a FIT image.
The image is assumed to be generated with mkimage -E flag to hold
the data external to the FIT.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2017-01-13 17:40:38 +01:00
tomas.melin@vaisala.com
7583f1f577 splash: sort include files
Sort include files in accordance to U-Boot coding style.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
2017-01-13 17:39:15 +01:00
Alexey Brodkin
d7b60fbfa6 splash: Accommodate DM_USB in splash_init_usb()
Current implementation of splash_init_usb() requires usb_stor_scan()
which doesn't exist in case of DM_USB simply because real probing
happens right in usb_init().

So disable usage of usb_stor_scan() in case of DM_USB.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Robert Winkler <robert.winkler@boundarydevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-25 22:42:10 +02:00
Eran Matityahu
1cb075c6c6 splash_source: add support for ubifs formatted nand
Add support for loading splash image from NAND Flash formatted with a (UBI) filesystem.

Signed-off-by: Eran Matityahu <eran.m@variscite.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
2016-06-14 05:33:02 +02:00
Scott Wood
b616d9b0a7 nand: Embed mtd_info in struct nand_chip
nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.

This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip.  It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00
Nikita Kiryanov
50c2d2e120 splash_source: add support for filesystem formatted sata
Add support for loading splashimage from filesystem formatted sata
storage.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-11-16 12:01:35 +01:00
Nikita Kiryanov
9bb4e94742 splash_source: add support for filesystem formatted usb
Add support for loading splash image from USB drive formatted with a
filesystem.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-11-16 12:01:35 +01:00
Nikita Kiryanov
870dd3095f splash_source: add support for filesystem formatted mmc
Add support for loading splash image from an SD card formatted with
a filesystem. Update boards to maintain original behavior where needed.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-11-16 12:01:35 +01:00
Nikita Kiryanov
bcbb6448b9 splash_source: rename *_read() to *_read_raw()
Rename raw read functions to *_read_raw() in preparation for supporting
read_fs() feature.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-11-16 12:01:35 +01:00
Nikita Kiryanov
f82eb2fa5d common: convert compulab splash load code to common code
Move board/compulab/common/splash.c code to
common/splash_source.c to make it available for everybody. This move
renames cl_splash_screen_prepare() to splash_source_load(), and
the compilation of this code is conditional on CONFIG_SPLASH_SOURCE.

splash_source features:
* Provide a standardized way for declaring board specific splash screen
  locations
* Provide existing routines for auto loading the splash image from the
  locations as declared by the board
* Introduce the "splashsource" environment variable, which makes it
  possible to select the splash image source.

cm-t35 and cm-fx6 are updated to use the modified version.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:44:08 +01:00