Commit Graph

20 Commits

Author SHA1 Message Date
Simon Glass
5a6f06f696 dm: core: Allow driver model to be disabled for TPL
Since TPL often needs to be very very small it may not make sense to
enable driver model. Add an option for this.

This changes brings the 'rock' board under the TPL limit with gcc 4.9.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:58 -04:00
Paul Burton
0a222d53d8 fdt: Support for ISA busses
Support ISA busses in much the same way as Linux does. This allows for
ISA bus addresses to be translated, and only if CONFIG_OF_ISA_BUS is
selected in order to avoid including the code in builds which won't need
it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-25 23:13:09 +02:00
Nathan Rossi
4f627c5a59 spl: dm: Add SPL_DM_SEQ_ALIAS config option
The Device Model sequence alias feature is required by some Uclasses.
Instead of disabling the feature for all SPL targets allow it to be
configured.

The config option is disabled by default to reduce code size for targets
that are not interested or do not require this feature.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-13 13:20:02 +01:00
Stefan Roese
7b98a3b676 dm: core: Fix Kconfig text to mention SPL in SPL_OF_TRANSLATE
Add a remark about SPL to this Kconfig option. Otherwise its identitcal
to the non-SPL version, which is confusing.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-12-10 20:41:56 -07:00
Michal Simek
8bebf03c73 dm: core: Enable SPL_SIMPLE_BUS by default
This option is needed for all SoCs which have nodes on bus. Without
enabling this drivers are not found and probed.
Issue was found on Zynq MMC probe.
Enable this option by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:30 +01:00
huang lin
41c7f664b9 dm: core: Add SPL Kconfig for REGMAP and SYSCON
Add SPL Kconfig for REGMAP and SYSCON, so REGMAP and SYSCON can
remove from SPL stage.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
Stefan Roese
ef5cd33064 dm: core: Enable optional use of fdt_translate_address()
The current "simple" address translation simple_bus_translate() is not
working on some platforms (e.g. MVEBU). As here more complex "ranges"
properties are used in many nodes (multiple tuples etc). This patch
enables the optional use of the common fdt_translate_address() function
which handles this translation correctly.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-10-21 02:25:01 +02:00
Marek Vasut
628d792c07 dm: core: Add Kconfig for simple bus driver
Add Kconfig entries for the simple-bus driver, both for U-Boot
and for SPL. The simple-bus is enabled by default in U-Boot and
disabled by default in SPL to preserve the original behavior.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Modified to fit on top of Masahiro's $(SPL) setup:
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-31 07:57:26 -06:00
Masahiro Yamada
0b11dbf705 drivers: hierarchize drivers Kconfig menu
The menuconfig for drivers are getting more and more cluttered
and unreadable because too many entries are displayed in a single
flat menu.  Use hierarchic menu for each category.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Update to apply again in a few places, drop USB hunk]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-12 20:47:44 -04:00
Masahiro Yamada
40b6f2d020 devres: add debug command to dump device resources
This new command can dump all device resources associated to
each device.  The fields in every line shows:
  - The address of the resource
  - The size of the resource
  - The name of the release function
  - The stage in which the resource has been acquired (BIND/PROBE)

Currently, there is no driver using devres, but if such drivers are
implemented, the output of this command should look like this:

=> dm devres
- root_driver
- soc
- extbus
- serial@54006800
    bfb541e8 (8 byte) devm_kmalloc_release  BIND
    bfb54440 (4 byte) devm_kmalloc_release  PROBE
    bfb54460 (4 byte) devm_kmalloc_release  PROBE
- serial@54006900
    bfb54270 (8 byte) devm_kmalloc_release  BIND
- gpio@55000000
- i2c@58780000
    bfb5bce8 (12 byte) devm_kmalloc_release  PROBE
    bfb5bd10 (4 byte) devm_kmalloc_release  PROBE
- eeprom
    bfb54418 (12 byte) devm_kmalloc_release  BIND

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-06 07:44:29 -06:00
Masahiro Yamada
e2282d7076 devres: make Devres optional with CONFIG_DEVRES
Currently, Devres requires additional 16 byte for each allocation,
which is not so insignificant in some cases.

Add CONFIG_DEVRES to make this framework optional.
If the option is disabled, devres functions fall back to
non-managed variants.  For example, devres_alloc() to kzalloc(),
devm_kmalloc() to kmalloc(), etc.

Because devres_head is also surrounded by an ifdef conditional,
there is no memory overhead when CONFIG_DEVRES is disabled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-06 07:44:29 -06:00
Masahiro Yamada
608f26c51b devres: introduce Devres (Managed Device Resource) framework
In U-Boot's driver model, memory is basically allocated and freed
in the core framework.  So, low level drivers generally only have
to specify the size of needed memory with .priv_auto_alloc_size,
.platdata_auto_alloc_size, etc.  Nevertheless, some drivers still
need to allocate/free memory on their own in case they cannot
statically know the necessary memory size.  So, I believe it is
reasonable enough to port Devres into U-boot.

Devres, which originates in Linux, manages device resources for each
device and automatically releases them on driver detach.  With devres,
device resources are guaranteed to be freed whether initialization
fails half-way or the device gets detached.

The basic idea is totally the same to that of Linux, but I tweaked
it a bit so that it fits in U-Boot's driver model.

In U-Boot, drivers are activated in two steps: binding and probing.
Binding puts a driver and a device together.  It is just data
manipulation on the system memory, so nothing has happened on the
hardware device at this moment.  When the device is really used, it
is probed.  Probing initializes the real hardware device to make it
really ready for use.

So, the resources acquired during the probing process must be freed
when the device is removed.  Likewise, what has been allocated in
binding should be released when the device is unbound.  The struct
devres has a member "probe" to remember when the resource was
allocated.

CONFIG_DEBUG_DEVRES is also supported for easier debugging.
If enabled, debug messages are printed each time a resource is
allocated/freed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-06 07:44:29 -06:00
Simon Glass
12dc8e7522 dm: Make regmap and syscon optional
Not all boards use garbage collection in their link step, so we should avoid
adding options that rely on this for prevention of code bloat. Add separate
Kconfig options for syscon and regmap uclasses.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-06 07:31:36 -06:00
Hans de Goede
e5c4564ee6 dm: usb: Document that mixing DM_DEVICE_REMOVE and DM_USB is a bad idea
Document that mixing DM_DEVICE_REMOVE and DM_USB is a bad idea, and also why
this is a bad idea.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:36 -06:00
Simon Glass
36fa61dc61 dm: core: Allow sequence alias support to be removed for SPL
In many cases SPL only uses a single serial port and there is no need for
alias sequence support. We will just use the serial port pointed to by
stdout-path in the /chosen node.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 09:05:51 -06:00
Masahiro Yamada
d648964fc2 kconfig: remove unneeded dependency on !SPL_BUILD
Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-24 17:06:27 -05:00
Simon Glass
91a91ff804 dm: Add Kconfig options for driver model SPL support
The SPL support cannot be enabled yet, but we can add the Kconfig
options in preparation for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-12 10:35:33 -07:00
Simon Glass
f94a1bed07 dm: Expand and complete Kconfig in drivers/
Expand the help messages for each driver. Add missing Kconfig for I2C,
SPI flash and thermal.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:33 -07:00
Masahiro Yamada
da333ae73c dm: add entries to Kconfig
Create entries of CONFIG_DM, CONFIG_DM_SERIAL, CONFIG_DM_GPIO
and CONFIG_DM_SPI.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 21:43:09 -06:00
Masahiro Yamada
ed36323f6d kconfig: add blank Kconfig files
This would be useful to start moving various config options.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00