Commit Graph

737 Commits

Author SHA1 Message Date
Tom Rini
d2b2ffe310 cmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images
The default format for arm64 Linux kernels is the "Image" format,
described in Documentation/arm64/booting.txt.  This, along with an
optional gzip compression on top is all that is generated by default.
The Image format has a magic number within the header for verification,
a text_offset where the Image must be run from, an image_size that
includes the BSS and reserved fields.

This does not support automatic detection of a gzip compressed image.

Signed-off-by: Tom Rini <trini@ti.com>
2014-08-30 07:46:41 -04:00
Tom Rini
5a1095a830 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-08-29 11:06:51 -04:00
Heiko Schocher
ff94bc40af mtd, ubi, ubifs: resync with Linux-3.14
resync ubi subsystem with linux:

commit 455c6fdbd219161bd09b1165f11699d6d73de11c
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sun Mar 30 20:40:15 2014 -0700

    Linux 3.14

A nice side effect of this, is we introduce UBI Fastmap support
to U-Boot.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Joerg Krause <jkrause@posteo.de>
2014-08-25 19:25:55 -04:00
Tom Rini
7bee1c91a9 Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging 2014-08-25 08:34:39 -04:00
Thierry Reding
92ac8acc01 net: More BOOTP retry timeout improvements
It's not unusual for DHCP servers to take a couple hundred milliseconds
to respond to DHCP discover messages. One possible reason for the delay
can be that the server checks (typically using an ARP request) that the
IP it's about to hand out isn't in use yet. To make matters worse, some
servers may also queue up requests and process them sequentially, which
can cause excessively long delays if clients retry too fast.

Commit f59be6e850 ("net: BOOTP retry timeout improvements") shortened
the retry timeouts significantly, but the BOOTP/DHCP implementation in
U-Boot doesn't handle that well because it will ignore incoming replies
to earlier requests. In one particular setup this increases the time it
takes to obtain a DHCP lease from 630 ms to 8313 ms.

This commit attempts to fix this in two ways. First it increases the
initial retry timeout from 10 ms to 250 ms to give DHCP servers some
more time to respond. At the same time a cache of outstanding DHCP
request IDs is kept so that the implementation will know to continue
transactions even after a retransmission of the DISCOVER message. The
maximum retry timeout is also increased from 1 second to 2 seconds. An
ID cache of size 4 will keep DHCP requests around for 8 seconds (once
the maximum retry timeout has been reached) before dropping them. This
should give servers plenty of time to respond. If it ever turns out
that this isn't enough, the size of the cache can easily be increased.

With this commit the DHCP lease on the above-mentioned setup still takes
longer (1230 ms) than originally, but that's an acceptable compromise to
improve DHCP lease acquisition time for a broader range of setups.

To make it easier to benchmark DHCP in the future, this commit also adds
the time it took to obtain a lease to the final "DHCP client bound to
address x.x.x.x" message.

Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-21 12:01:30 -04:00
Sascha Silbe
feb858012f README: document CONFIG_BOARD_SIZE_LIMIT
CONFIG_BOARD_SIZE_LIMIT was introduced by f3a14d37 [Makefile: allow
boards to check file size limits] and is in use by several boards, but
never got documented.

Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de>
2014-08-14 15:57:08 +02:00
Markus Niebel
412921d29e RTC: add support for DS1339 (using DS1307 driver)
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2014-08-14 14:45:58 +02:00
Stefano Babic
e82abaeb7f Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	boards.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-08-11 10:21:03 +02:00
Stefano Babic
c23154aab5 Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-08-08 10:18:40 +02:00
Holger Freyther
ab584d67c5 The _config target is not present anymore, mention _defconfig instead
The _config part is gone for sure, the _defconfig target could at least
work. I have not verified this for all targets though.
2014-08-06 09:02:46 -04:00
Tom Rini
336450f5fc Merge branch 'master' of git://git.denx.de/u-boot-spi 2014-08-06 08:38:19 -04:00
Heiko Schocher
f659b57361 spi, spi_mxc: do not hang in spi_xchg_single
if status register do never set MXC_CSPICTRL_TC, spi_xchg_single
endless loops. Add a timeout here to prevent endless hang.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Dirk Behme <dirk.behme@gmail.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-08-06 00:18:01 +05:30
Simon Glass
76a1e584e1 arm: Support pre-relocation malloc()
Add support for re-relocation malloc() in arm's start-up code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-04 05:24:35 -06:00
Simon Glass
29afe9e6ed sandbox: Support pre-relocation malloc()
Set up and zero global data before board_init_f() is called so that we can
remove the need for CONFIG_SYS_GENERIC_GLOBAL_DATA.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:06:13 +01:00
Simon Glass
d59476b644 Add a simple malloc() implementation for pre-relocation
If we are to have driver model before relocation we need to support some
way of calling memory allocation routines.

The standard malloc() is pretty complicated:

1. It uses some BSS memory for its state, and BSS is not available before
relocation

2. It supports algorithms for reducing memory fragmentation and improving
performace of free(). Before relocation we could happily just not support
free().

3. It includes about 4KB of code (Thumb 2) and 1KB of data. However since
this has been loaded anyway this is not really a problem.

The simplest way to support pre-relocation malloc() is to reserve an area
of memory and allocate it in increasing blocks as needed. This
implementation does this.

To enable it, you need to define the size of the malloc() pool as described
in the README. It will be located above the pre-relocation stack on
supported architectures.

Note that this implementation is only useful on machines which have some
memory available before dram_init() is called - this includes those that
do no DRAM init (like tegra) and those that do it in SPL (quite a few
boards). Enabling driver model preior to relocation for the rest of the
boards is left for a later exercise.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:05:40 +01:00
Heiko Schocher
562f8df18d spi: add config option to enable the WP pin function on st micron flashes
enable the W#/Vpp signal to disable writing to the status
register on ST MICRON flashes like the N25Q128 thorugh
the new config option CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-07-23 12:26:45 +02:00
Heiko Schocher
b2f97cf279 pwm, imx6: add support for pwm modul on imx6
add basic support for the pwm modul found on imx6.
Pieces of this code are based on linux code from drivers/pwm/pwm-imx.c
Commit "cd3de83f1476 Linux 3.16-rc4"

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2014-07-23 12:25:42 +02:00
Dirk Eibach
9a4f479b64 fit: make sha256 support optional
sha256 has some beefy memory footprint.
Make it optional for constrained systems.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07 19:47:19 -04:00
Dirk Eibach
b46226bdb5 i2c: IHS I2C master driver
IHS I2C master support was merely a hack in the osd driver.
Now it is a proper u-boot I2C framework driver, supporting the
v2.00 master features.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2014-07-07 19:47:18 -04:00
Wu, Josh
bd83b59212 README: document CONFIG_ENV_IS_IN_SPI_FLASH
The option can be used to save the environment in spi flash.
Implementation code is already exist in command/env_sf.c. But
the documentation is missing.

This patch add the details for this option to the README file.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-07-07 19:43:01 -04:00
Wu, Josh
d1db76f149 README: document the CONFIG_ENV_IS_IN_FAT option
In README file, add document for the missing configuration option:
CONFIG_ENV_IS_IN_FAT.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-07-07 19:42:33 -04:00
J. German Rivera
b940ca64b2 armv8/fsl-lsch3: Add support to load and start MC Firmware
Adding support to load and start the Layerscape Management Complex (MC)
firmware. First, the MC GCR register is set to 0 to reset all cores. MC
firmware and DPL images are copied from their location in NOR flash to
DDR. MC registers are updated with the location of these images.
Deasserting the reset bit of MC GCR register releases core 0 to run.
Core 1 will be released by MC firmware. Stop bits are not touched for
this step. U-boot waits for MC until it boots up. In case of a failure,
device tree is updated accordingly. The MC firmware image uses FIT format.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com>
2014-07-03 08:40:58 +02:00
Simon Glass
2eb31b13d9 dm: Update README to encourage conversion to driver model
Add a note to encourage people to convert drivers to use driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:55:25 -06:00
Simon Glass
aa53233a15 Add an I/O tracing feature
When debugging drivers it is useful to see what I/O accesses were done
and in what order.

Even if the individual accesses are of little interest it can be useful to
verify that the access pattern is consistent each time an operation is
performed. In this case a checksum can be used to characterise the operation
of a driver. The checksum can be compared across different runs of the
operation to verify that the driver is working properly.

In particular, when performing major refactoring of the driver, where the
access pattern should not change, the checksum provides assurance that the
refactoring work has not broken the driver.

Add an I/O tracing feature and associated commands to provide this facility.
It works by sneaking into the io.h heder for an architecture and redirecting
I/O accesses through its tracing mechanism.

For now no commands are provided to examine the trace buffer. The format is
fairly simple, so 'md' is a reasonable substitute.

Note: The checksum feature is only useful for I/O regions where the contents
do not change outside of software control. Where this is not suitable you can
fall back to manually comparing the addresses. It might be useful to enhance
tracing to only checksum the accesses and not the data read/written.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:54:29 -06:00
Tom Rini
61e76f5370 Merge branch 'master' of git://git.denx.de/u-boot-usb 2014-06-10 20:37:00 -04:00
Heiko Schocher
21d29f7f9f bootm: make use of legacy image format configurable
make the use of legacy image format configurable through
the config define CONFIG_IMAGE_FORMAT_LEGACY.

When relying on signed FIT images with required signature check
the legacy image format should be disabled. Therefore introduce
this new define and enable legacy image format if CONFIG_FIT_SIGNATURE
is not set. If CONFIG_FIT_SIGNATURE is set disable per default
the legacy image format.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Lars Steubesand <lars.steubesand@philips.com>
Cc: Mike Pearce <mike@kaew.be>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Simon Glass <sjg@chromium.org>
2014-06-05 14:44:56 -04:00
Siva Durga Prasad Paladugu
4f0d1a2aea fat: Define MAX_CLUSTSIZE using CONFIG_FS_FAT_MAX_CLUSTSIZE
Define the MAX_CLUSTSIZE to default of 65536 only if
CONFIG_FS_FAT_MAX_CLUSTSIZE is not defined.
This option has been provided to save memory in some
memory constrained cases.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <monstr@monstr.eu>
2014-06-05 14:44:56 -04:00
Stephen Warren
77b83e6d09 usb: hub: remove CONFIG_USB_HUB_MIN_POWER_ON_DELAY
Now that we wait the correct specification-mandated time at the end of
usb_hub_power_on(), I suspect that CONFIG_USB_HUB_MIN_POWER_ON_DELAY has
no purpose.

For cm_t35.h, we already wait longer than the original MIN_POWER_ON_DELAY,
so this change is safe.

For gw_ventana.h, we will wait as long as the original MIN_POWER_ON_DELAY
iff pgood_delay was at least 200ms. I'm not sure if this is the case or
not, hence I've CC'd relevant people to test this change.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-01 19:20:07 +02:00
Masahiro Yamada
facb6725c3 powerpc: mpc8260ads: remove orphan board
This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
2014-05-30 14:03:24 -04:00
Tom Rini
638b3e8342 Merge branch 'master' of git://git.denx.de/u-boot-mmc 2014-05-23 08:13:59 -04:00
Pierre Aubert
1fd93c6e7d eMMC: cmd_mmc.c adds the 'rpmb' sub-command for the 'mmc' command
This sub-command adds support for the RPMB partition of an eMMC:
* mmc rpmb key <address of the authentication key>
  Programs the authentication key in the eMMC This key can not
  be overwritten.
* mmc rpmb read <address> <block> <#count> [address of key]
  Reads <#count> blocks of 256 bytes in the RPMB partition
  beginning at block number <block>. If the optionnal
  address of the authentication key is provided, the
  Message Authentication Code (MAC) is verified on each
  block.
* mmc rpmb write <address> <block> <#count> <address of key>
  Writes <#count> blocks of 256 bytes in the RPMB partition
  beginning at block number <block>. The datas are signed
  with the key provided.
* mmc rpmb counter
  Returns the 'Write counter' of the RPMB partition.

The sub-command is conditional on compilation flag CONFIG_SUPPORT_EMMC_RPMB

Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
CC: Wolfgang Denk <wd@denx.de>
2014-05-23 11:53:17 +03:00
Tom Rini
4d16f67e7b Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze 2014-05-22 14:38:19 -04:00
Tom Rini
c9afa7cea8 Merge branch 'master' of git://git.denx.de/u-boot-usb 2014-05-22 12:56:15 -04:00
Michal Simek
67193864bc fpga: Add support to load partial bitstreams
Added support to load partial bitstreams.
The partial bitstreams can be loaded using the below commands
Commands:
fpga loadp <dev> <addr> <size>
fpga loadbp <dev> <addr> <size>
The full bit streams can be loaded using the
old commands(fpga load and fpga loadb).

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-20 15:23:46 +02:00
Siva Durga Prasad Paladugu
64e809afea fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK
Guard the LOADMK functionality with config to provide
an option to enable or disable it.
Enable it for all platforms in mainline which enable CONFIG_CMD_FPGA.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-20 15:23:46 +02:00
York Sun
2a1680e30e common/board_f: Initialized global data for generic board
Some platforms (tested on mpc85xx, mpc86xx) use global data before calling
function baord_inti_f(). The data should not be cleared later. Any arch
which uses global data in generic board board_init_f() should define
CONFIG_SYS_GENERIC_GLOBAL_DATA.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Simon Glass <sjg@chromium.org>
CC: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Simon Glass <sjg@chromium.org>
2014-05-12 15:20:05 -04:00
Karicheri, Muralidharan
d57dee5787 serial: nsl16550: add hw flow control support
keystone serial hw support hw flow control. This patch
enables hw flow control for keystone EVMs as an optional
feature based on CONFIG_SERIAL_HW_FLOW_CONTROL.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
2014-05-12 15:19:45 -04:00
Tom Rini
f4617ef86d Merge branch 'tom' of git://git.denx.de/u-boot-x86 2014-05-09 18:48:26 -04:00
Simon Glass
75b3c3aa84 sandbox: Update and expand the README
Now that sandbox has a good base of features, the README is quite out of
date. Update it, and document the new features.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-09 14:47:57 -06:00
Albert ARIBAUD
d2a3e91139 Merge branch 'u-boot/master'
Conflicts:
	drivers/net/Makefile

(trivial merge)
2014-05-09 11:50:14 +02:00
Sebastian Siewior
3aab70afc5 usb/gadget: add the fastboot gadget
This patch contains an implementation of the fastboot protocol on the
device side and documentation. This is based on USB download gadget
infrastructure. The fastboot function implements the getvar, reboot,
download and reboot commands. What is missing is the flash handling i.e.
writting the image to media.

v3 (Rob Herring):
This is based on http://patchwork.ozlabs.org/patch/126798/ with the
following changes:
- Rebase to current mainline and updates for current gadget API
- Use SPDX identifiers for licenses
- Traced the history and added missing copyright to cmd_fastboot.c
- Use load_addr/load_size for transfer buffer
- Allow vendor strings to be optional
- Set vendor/product ID from config defines
- Allow Ctrl-C to exit fastboot mode
v4:
- Major re-write to use the USB download gadget. Consolidated function
code to a single file.
- Moved globals into single struct.
- Use puts and putc as appropriate.
- Added CONFIG_USB_FASTBOOT_BUF_ADDR and CONFIG_USB_FASTBOOT_BUF_SIZE to
set the fastboot transfer buffer.
v5:
- Add CONFIG option documentation to README
- Rebase using new downloader registration

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2014-05-08 10:38:30 +02:00
Mateusz Zalega
75504e9592 usb: dfu: fix boards wo USB cable detection
Former usb_cable_connected() patch broke compilation of boards which do
not support this feature.

I've renamed usb_cable_connected() to g_dnl_usb_cable_connected() and added
its default implementation to gadget downloader driver code. There's
only one driver of this kind and it's unlikely there'll be another, so
there's no point in keeping it in /common.

Previously this function was declared in usb.h. I've moved it, since
it's more appropriate to keep it in g_dnl.h - usb.h seems to be intended
for USB host implementation.

Existing code, confronted with default -EOPNOTSUPP return value,
continues as if the cable was connected.

CONFIG_USB_CABLE_CHECK was removed.

Change-Id: Ib9198621adee2811b391c64512f14646cefd0369
Signed-off-by: Mateusz Zalega <m.zalega@samsung.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2014-05-05 08:00:28 +02:00
Tom Rini
080d897585 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2014-04-25 14:53:51 -04:00
Prabhakar Kushwaha
89ad7be8e7 Makefile: Add support of CONFIG_SPL_FSL_PBL
Objective of this target to have concatenate binary having
 - SPL binary in PBL command format
 - U-boot binary

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:51 -07:00
Prabhakar Kushwaha
651fcf6019 powerpc:Add support of SPL non-relocation
Current SPL code base has BSS section placed after reset_vector. This means
they have to relocate to use the global variables. This put an implicit
requirement of having SPL size = Memory/2.

To avoid relocation:
	- Move bss_section within SPL range
	- Modify relocate_code()

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:50 -07:00
Tang Yuantian
aade20046b mpc85xx/t104x: Add deep sleep framework support
When T104x soc wakes up from deep sleep, control is passed to the
primary core that starts executing uboot. After re-initialized some
IP blocks, like DDRC, kernel will take responsibility to continue
to restore environment it leaves before.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:49 -07:00
York Sun
34e026f9b1 driver/ddr/fsl: Add DDR4 support to Freescale DDR driver
Mostly reusing DDR3 driver, this patch adds DDR4 SPD handling, register
calculation and programming.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:48 -07:00
Zhao Qiang
dcf1d774bf QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR
CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address.
Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address,
and CONFIG_SYS_QE_FW_ADDR for QE microcode address.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:47 -07:00
Aneesh Bansal
fb4a2409b4 powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS
Changes:
1. L2 cache is being invalidated by Boot ROM code for e6500 core.
   So removing the invalidation from start.S
2. Clear the LAW and corresponding configuration for CPC. Boot ROM
   code uses it as hosekeeping area.
3. For Secure boot, CPC is configured as SRAM and used as house
   keeping area. This configuration is to be disabled once in uboot.
   Earlier this disabling of CPC as SRAM was happening in cpu_init_r.
   As a result cache invalidation function was getting skipped in
   case CPC is configured as SRAM.This was causing random crashes.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:46 -07:00
Masahiro Yamada
6eae68e450 cosmetic: README: add some entries to Directory Hierarchy
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-04-20 13:16:42 +02:00