Commit Graph

11828 Commits

Author SHA1 Message Date
Tom Rini
582d97b6d3 Xilinx changes for v2018.07 second pull
zynqmp:
 - Show reset reason
 - Remove emulation platform
 - Update pmufw version
 - Simplify mmc bootmode
 - Remove dc2 useless configuration file
 - Cleanup mini config
 - Defconfig syncup
 - zcu100, zcu104 and zcu111 dts fixes
 
 xilinx:
 - Use live-tree functions in some drivers
 - Add support for Avnet Minized and Antminer S9
 
 fpga:
 - Add secure bitstream loading support
 
 mmc:
 - Add hs200 mode support
 
 usb xhci:
 - Header fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlsRRy4ACgkQykllyylKDCEovgCdGWsr4XFQfDZxCEMmsg2vyJF2
 0egAnj6Td1k6yTzQPDXwCtExZJfS/vgl
 =QxUz
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07 second pull

zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
- Simplify mmc bootmode
- Remove dc2 useless configuration file
- Cleanup mini config
- Defconfig syncup
- zcu100, zcu104 and zcu111 dts fixes

xilinx:
- Use live-tree functions in some drivers
- Add support for Avnet Minized and Antminer S9

fpga:
- Add secure bitstream loading support

mmc:
- Add hs200 mode support

usb xhci:
- Header fix
2018-06-01 13:50:15 -04:00
Tom Rini
c90c43cda8 Merge tag 'arc-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arc
Here we do a couple of minor fixes like:
 - Move .ivt section to the very beginning of the image
   by default which allows us to use that image put right
   at reset vector (usually 0x0)

 - Improve relocation fix-up which became required once
   we moved .ivt and understood a problem with existing implementation
   where we relied on a particular placement of sections.
   Now we don't care about placement because we just explicitly
   check for .text and in case of ARCompact .ivt sections

 - Re-implemnt do_reset() such that it calls reset_cpu() which
   could implmented for a particular board

And hte most important part we introduce support for yet another
devboard from Synopsys - EMDK.
2018-05-31 14:17:36 -04:00
Alexey Brodkin
2c3f9261c8 ARC: Add support for EM Development Kit board
Synopsys DesignWare ARC EM Development Kit (ARC EMDK) is
an FPGA-based development platform from Synopsys aimed to speed-up
development of software for ARC EM cores and entire subsystems based on
ARC EM like Data Fusion, Secure and Sensor & Control subsystems.

U-Boot is supposed to be used as a primary bootloader on EMDK allowing
users to easily load and start their application from micro-SD card.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-31 20:13:29 +03:00
Ezequiel Garcia
c66f5620e6 arm: zynq: Add support for Bitmain Antminer S9 control board
This is control board on Bitmain Antminer S9.
There are 3 board variables with 256MB, 512MB and 1024MB DDR.
DDR memory is automatically detected with using get_with using
get_ram_size().

Bitmain is using 16MB space for FPGA which is handled via
reserved-memory. Also U-Boot is allocating 16B for storing bootcounts.
Watchdog is started but never service in U-Boot.

SPL MMC is working. SPL NAND is not working because it is not supported
as of now.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Michal Simek
95d565fdc2 arm64: zynqmp: Remove CMD_UNZIP for mini configuration
CMD_UNZIP is already disabled via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Michal Simek
35f051ab66 arm64: zynqmp: Remove empty configuration file
There is no reason to keep empty config file in the tree that's why
remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Tom Rini
964d4f7211 Merge git://git.denx.de/u-boot-riscv 2018-05-30 08:43:04 -04:00
Chris Packham
e85f490a47 configs: remove CONFIG_SYS_MVFS
This was being used by some Marvell boards to enable some file system
related features (many of which have already been moved to Kconfig).
Make the future migration of the final 2 or 3 config options easier by
expanding #define CONFIG_SYS_MVFS into the options that it enables and
remove CONFIG_SYS_MVFS.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29 10:37:52 +02:00
Rick Chen
c038fd0ea6 configs: ax25-ae350: Support cfi flash
Enable cfi flash driver and setup flash
parameters to support parallel nor flash
which type is JS28F00A-M29EWH.

Verification:
Size detection, data read, erase and write are all ok.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-05-29 14:45:03 +08:00
Rick Chen
0b1a1adaeb configs: nx25-ae250:Rename as ax25-ae350
Rename
 nx25 as ax25
 ae250 as ae350
 nx25-ae250 as ax25-ae350
 including filename, variable, string and definition.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-05-29 14:45:02 +08:00
Alexander Graf
0979f7ce1e riscv: nx25: Enable distro boot
Distro boot allows for a common boot path on systems that allow distributions
to easily boot from a default configuration.

This patch enables distro boot for the nx25-ae250. Hopefully this can serve
as a good example for new boards, so they enable it as well.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-29 14:43:12 +08:00
Chris Packham
bba769d3ae configs: remove redundant comment sections
mv-common.h and mv-plug-common.h still had comments delimiting sections
of configuration options that have all been moved to Kconfig by previous
treewide efforts. Remove the redundant comment sections.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29 08:33:05 +02:00
Chris Packham
a14b601652 configs: remove empty #ifdef block from mv-common.h
The last option guarded by this ifdef was removed in commit 68d5342017
("sf: Move SPI flash drivers to defconfig"). Remove the now empty
ifdef/endif block and the associated comment.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29 08:33:05 +02:00
Radoslaw Pietrzyk
246a5e5fc2 ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at booting
- adds reading FMC swap setting from DTB to SDRAM driver
- sets FMC swap for stm32f429-disco board
- changes ram start address to 0x90000000

Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-26 18:19:17 -04:00
Tom Rini
8730d012c9 Merge tag 'arc-uart-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arc
Add support for DEBUG_UART on ARC devboards

This required us to do 2 things:
 1) Insert a call to debug_uart_init() in early boot code
 2) Convert serial_arc to Kconfig

Once both items above are done we just patched defconfigs.
2018-05-24 09:54:25 -04:00
Tom Rini
7049f62000 Patch queue for rpi - 2018-05-24
Some minor fixes for the Raspberry Pi:
 
   - Fix SD writes on new sdhost controller
   - Sanitize default load addresses, allowing for better payload placement
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbBnlXAAoJECszeR4D/txghsYP/2n48vz7VwWI/gAGLvEzZl2T
 ZPVX/RKgMrWcGmEZiJVTE02OovbU9ybECOZXOAqLToQAXcGAl0OHNi+h2F/AH9+S
 WUZbv1wQeHD42Q3ivNjtNZY0U5D7rvVRL+33FmrHuBiLq1mUbq3uHBn7NTrCORX5
 byZvQXis4JeUNefIrAynrelI7uuyaQEtwcOWbEFlh9S1tnXjbJkkaleU5TQs3tpl
 yjlCrFthhi9uOW/cKoqWs0GxxNsWF9/RDapTXkLvfGOS+0noHKfeYypmDuD3q1CM
 FmicN0t459s3H5ft/ACSa/HyAuxzkP4Zqn8vDMG+MsxYLOiklwKDLzRNj1GcvmYd
 Z6UmnWPII4ZRyEC8xjyL5e7ovb/RW+9g4ZVVctP+PHJCHjIMxiAdxGQ+DjYRn2Q5
 T25HPXH1KTqxGwMI1LcEWfHaI7FoBSyTHy7CQrMvb7cuSDSg1lyTYSwdzsAmTX1J
 4++DLpTAqi2XSNNt+DIb938xKYXwbfhSCMH3Z9oTsOfxcqiWIudqbPyMwdxsOJ73
 tn6Ql2aivq9TyP5tByszQbf3Y8KoXoCtufWg8Lj2fCgsC0wAtDpEEhWI8QT2zY7q
 Rs+UX+eWRWKO5UOLqG1aAhJayoP2/12f9oTbo+Q1VmCgqG696J2UkezMmUjDNv/D
 IAXemClUO1MMY7yax8Ls
 =te7/
 -----END PGP SIGNATURE-----

Merge tag 'signed-rpi-next' of git://github.com/agraf/u-boot

Patch queue for rpi - 2018-05-24

Some minor fixes for the Raspberry Pi:

  - Fix SD writes on new sdhost controller
  - Sanitize default load addresses, allowing for better payload placement
2018-05-24 09:54:14 -04:00
Alexey Brodkin
d7ac185fd8 serial: Convert ARC_SERIAL to Kconfig
One step closer to completely Kconfig-driven target configuration in
U-Boot :)

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-24 15:59:17 +03:00
Tuomas Tynkkynen
385cbe298a rpi: Change load addresses to make more room for the kernel & DTB
As of Linux 4.16, a multiplatform AArch64 kernel with our distro config
takes 26M. The current space reservation leaves only 17M for the kernel
and if it goes over it, the initrd gets overwritten when loading the
kernel from the filesystem.

A similar problem happens on ARMv7 with the DTBs taken from the
downstream Raspberry Pi foundation kernel. I guess they compile them
with DT overlay support enabled which grows them just enough.

Fix both of these problems by rewriting the memory map, which now allows
kernels to be up to 36M and DTBs up to 1M. Also the comment block was
kind of obsolete ever since the introduction of AArch64 support and the
firmware-loaded DTB doesn't get placed at 0x100 anymore either, so that
is fixed as well.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-24 10:20:53 +02:00
Eugen Hristev
c4d7b7a6b8 configs: sama5d2_xplained: fix bootcmd/args for spi+emmc demo
For sama5d2_xplained_spiflash_defconfig, we have the demo layout
as presented on this link:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2XplainedMainPage#SPI_eMMC_Flash_demo_Memory_map

on SPI Flash (4 Mbyte) we have Bootstrap (second level bootloader), U-boot + env

and kernel+dtb we keep on eMMC on single partition in /boot directory, formatted
with ext4.

Thus, changing the boot command to reflect this demo for the spiflash config,
and fixing up bootargs. Sama5d2_xplained does not have NAND flash, so the
bootargs were completely wrong.

Fixes: "5abc1a45": common: Move CONFIG_BOOTARGS to Kconfig
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-23 17:30:05 -04:00
Nicolas Ferre
7b8b19fbdc configs: at91: Adjust CONFIG_ENV_OFFSET to match sama5 address
In order to have a single ENV_OFFSET to manage, use the same as the sama5 one.
This address matches our NAND flash map available at:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_map

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com: rework on latest version of u-boot]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-23 17:30:03 -04:00
Nicolas Ferre
e32f240630 configs: at91: sama5_common: Adjust CONFIG_ENV_OFFSET to match block alignment
Fix the unaligned environment address.
This address matches our NAND flash map available at:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_map

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com: rework on latest version of u-boot]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-23 17:30:03 -04:00
Alex Kiernan
5a7b11e65a Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling
from the underlying support and expose this through CMD_MMC_RPMB.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-23 17:30:02 -04:00
Alexander Graf
d295c3ec35 rpi: Adjust fdt_addr_r to a sane address
Back in the old days, 0x100 was used as the address to pass the device tree
from firmware into the kernel. This has since changed to a more dynamic
location, so using 0x100 actually breaks more things than it helps with.

Let's move the device tree default location for distro boot to a more sane
place that gives us enough head room in low memory.

Reported-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-23 22:31:23 +02:00
Masahiro Yamada
8c09f1f4fc ARM: uniphier: rename environment variable fdt_file to fdtfile
For booting Linux in the generic distro mechanism, cmd/pxe.c
retrieves the FDT file name from "fdtfile" environment variable.

Rename "fdt_file" to "fdtfile" for easier migration to distro boot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-23 00:32:39 +09:00
Tom Rini
bea1649cd9 Merge branch 'master' of git://git.denx.de/u-boot-sh 2018-05-20 09:44:38 -04:00
Tom Rini
56932e84ea Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-05-20 09:44:13 -04:00
Tom Rini
904e546970 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2018-05-20 09:44:05 -04:00
Marek Vasut
e9c891ff93 ARM: rmobile: Update V2H Blanche
The V2H Blanche port was broken since some time. This patch updates
the V2H Blanche port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20 12:06:55 +02:00
Tom Rini
855ff8e6dd Fixup various SPDX tags from the latest merge
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18 17:56:50 -04:00
Michal Simek
b4af64fdfd arm64: zynqmp: Use DWC3 generic driver and DM_USB
Remove harcoded XHCI lists and detect mode, speed based on DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Serial-changes: 2
- Remove also XHCI macros from hardware.h
- Remove additional new line in zcu106
2018-05-18 13:23:15 +02:00
Tien Fong Chee
421a21c53a ARM: socfpga: Enable SPL memory allocation
Enable memory allocation in SPL for preparation to enable FAT
in SPL. Memory allocation is needed by FAT to work properly.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18 10:30:47 +02:00
Marek Vasut
73172753f4 ARM: socfpga: Convert to DM serial
Pull the serial port configuration from DT and use DM serial instead
of having the serial configuration in two places, DT and board config.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18 10:30:46 +02:00
Marek Vasut
f79173280c ARM: socfpga: Zap CONFIG_SOCFPGA_VIRTUAL_TARGET
This was never used, is not used anywhere and is just in the way
by adding annoying ifdeffery. Get rid of it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18 10:30:46 +02:00
Marek Vasut
768f23dc8a ARM: socfpga: Put stack at the end of SRAM
The global data are in the .data section, so there's no point in
reserving any space for it above stack. Put stack at the end of
SRAM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18 10:30:45 +02:00
Lukasz Majewski
ee94365557 arm: imx53: Add support for imx53 boards from K+P
This commit adds support for DDC and HSC boards from
K+P in u-boot.

Console output:

U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200)

CPU:   Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: WDOG
Model: K+P iMX53
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Module EEPROM:
  ID: TQMa53-CB.0401
  SN: 63152762
  MAC: 00:0b:64:03:14:2a
BBoard:40x0 Rev:10
Net:   eth0: ethernet@63fec000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-18 08:29:38 +02:00
Jagan Teki
9e759ce904 configs: imx6dl-mamoj: Add Falcon mode support
Add Falcon mode support to boot Linux directly after SPL.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18 08:23:43 +02:00
Jagan Teki
129ceda202 configs: imx6dl-mamoj: Add DFU support
Add DFU support for BTicino Mamoj board and update
the same steps in README.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18 08:23:43 +02:00
Jagan Teki
1494cc89cb i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Add initial support for i.MX6DL BTicino Mamoj board.

Mamoh board added:
- SPL
- SPL_DM
- SPL_OF_CONTROL
- DM for U-Boot proper
- OF_CONTROL for U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDP

Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18 08:23:43 +02:00
Guillaume GARDET
cc5d7dcb61 imx6: Convert sabrelite and nitrogen6x boards to distro boot support
Boot tested on sabrelite board.

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Denis Pynkin <denis.pynkin@collabora.com>
2018-05-17 19:10:07 +02:00
Sebastian Reichel
499efc08b0 ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfig
CONFIG_ENV_IS_IN_MMC must be declared in defconfig to properly
support "env save".

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 12:09:41 +02:00
Peter Robinson
30e44c8e0a mx6: remove duplicated BOUNCE_BUFFER defines
The mx6_common.h file already defines BOUNCE_BUFFER so no need to
definit it again in specific configs.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2018-05-17 12:05:07 +02:00
Peter Robinson
02ada2d958 mx6: Select CONFIG_MP with MX6_SMP
It makes sense to select the MP multi processor option at the same time we
select the other SMP options needed for SMP capable i.MX6 SoCs.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17 12:04:22 +02:00
Peter Robinson
5bbf1a7856 mx7: remove empty ifndef statement
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17 12:03:56 +02:00
Peter Robinson
8f5b794394 mx6 common: remove dangling comment
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17 12:03:29 +02:00
Magnus Lilja
3159ec64f5 mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.
Move CONFIG_MX31 from mx31pdk.h to mx31pdk_defconfig and introduce
necessary Kconfig changes as well.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-17 12:02:24 +02:00
Ian Ray
51a42bea52 board: ge: bx50v3: remove redundant targets
This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3.
The boards are identified automatically at runtime.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:58:48 +02:00
Ian Ray
06a3e4389c board: ge: bx50v3: configure video arguments using VPD
Configure video arguments at run-time instead of at compile-time.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:54:24 +02:00
Chris Packham
ed52ea507f net: add Kconfig for MVGBE
Add Kconfig for MVGBE and update boards to select this.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-05-14 21:28:38 -04:00
Chris Packham
9b23c73d5e net: Add Kconfig option for BOOTP_NTPSERVER
Add a Kconfig option for BOOTP_NTPSERVER to enable the DHCP/BOOTP option
to configure the sntp server address.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-14 21:28:38 -04:00
Mario Six
a8ca5c8adb treewide: Move CONFIG_PHY_MARVELL to Kconfig
The CONFIG_PHY_MARVELL has already been migrated to Kconfig (some boards
already had it in their Kconfig), but had not been moved for older
boards.

Move it to the defconfigs for all boards.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-14 21:28:38 -04:00