Commit Graph

13 Commits

Author SHA1 Message Date
Lukasz Majewski
27aede24bc display5: Support for the emergency PAD pressing
To enter the special mode, one needs to short cut two pads with e.g. screw
driver.

After power up the SPL will execute u-boot in which proper actions will be
taken.

It is worth noting that we do not alter envs (even the BOOT_FROM variable)
and unconditionally go to recovery.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Lukasz Majewski
1fa328f73a display5: config: Update SPI-NOR partition for larger swupdate-initramfs
The SPI-NOR partition information has been updated to store
swupdate-kernel-FIT just after envs as well as two times larger
swupdate-initramfs image.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Lukasz Majewski
b78e9c4f1e display5: config: Remove support for Linux initramfs recovery image boot
This is a prerequisite patch to combine SWUpdate and Linux recovery
initramfs images.

It removes the support for it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Lukasz Majewski
1bcbf48f18 display5: config: Reset the board when bootm fails
Since display5 is now supporting boot counting, we can just reset the
board when bootm fails (i.e. it doesn't boot the fitImage kernel for
any reason).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Lukasz Majewski
2f4372a101 display5: config: Provide command to flash the whole SPI-NOR memory
It may be necessary to update the content of the whole SPI-NOR memory at
once with using a single command (tftp_sf_img).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Lukasz Majewski
86d759ea3c display5: config: Add "factory" (1MiB) SPI-NOR partition in u-boot
To test if this partition is present - one needs to write:
display5 > sf probe; mtdparts
display5 > sf erase factory +0x100000

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Lukasz Majewski
4864ba7f4a display5: config: factory: Setup IP config data according to LEG production setup
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Lukasz Majewski
13e012f7b5 display5: factory: Add support for BOOT_FROM = FACTORY switch
When BOOT_FROM = FACTORY, then the LEG's factory setup is performed.

This code relies on boot_nfs u-boot command, so it shall be adjusted
appropriately (e.g. provide proper fitImage file).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18 15:42:38 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Marek Vasut
555004381e spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all
configurations using it to Kconfig.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:00 -04:00
Mario Six
07dea2e737 treewide: Migrate CONFIG_FSL_ESDHC to Kconfig
Migrate the CONFIG_FSL_ESDHC option to Kconfig.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08 18:31:05 -04:00
Tuomas Tynkkynen
60e5456291 spi: Migrate CONFIG_MXC_SPI to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-02-13 23:01:44 -05:00
Lukasz Majewski
a3eec24ad3 imx:display5: Add support for LWN's DISPLAY5 board
This commit provides support for LWN's IMX6Q based DISPLAY5 board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09 11:32:49 +01:00