Commit Graph

19070 Commits

Author SHA1 Message Date
Nikita Kiryanov
41984e7123 cm_t35: use new low level interface for usb ehci
Update usb host support to use new version of omap_ehci_hcd_init.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2012-12-20 17:04:21 +01:00
Nikita Kiryanov
854a7836dc cm-t35: add USB host support
Add support for USB host ports on cm-t3530 and cm-t3730.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2012-12-20 17:04:21 +01:00
Nikita Kiryanov
41b13bc7c4 twl4030: add gpio register offsets
Add gpio register offsets for twl4030.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2012-12-20 17:04:21 +01:00
Tom Rini
e3c52f2b87 Revert "fw_env: fix building w/out a config.h"
I had missed Joe's NAK on this patch, so...

This reverts commit 92ace272d0.

Signed-off-by: Tom Rini <trini@ti.com>
2012-12-20 07:30:27 -07:00
Yoshihiro Shimoda
bb474b8187 serial_sh: Add support Renesas SH7752
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-12-20 13:20:17 +09:00
Yoshihiro Shimoda
1a2621bab8 sh: add support for sh7752evb board
The R0P7752C00000RZ board has SH7752, 512MB DDR3-SDRAM, SPI ROM,
Gigabit Ethernet, and eMMC.

This patch supports the following functions:
 - 512MB DDR3-SDRAM, SCIF4, SPI ROM, Gigabit Ethernet, eMMC

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-12-20 13:20:17 +09:00
Jens Scharsig (BuS Elektronik)
46dc5bcade coldfire: eb_cpu5282: fix: boot from internal flash
* By a sequence of unfavorable conditions in the config header file, the eb_cpu5282
  booting from  internal stopped after relocation. Blame it is a faulty value of
  CONFIG_SYS_MONITOR_BASE. This patch fix this by replace the wrong condition in
  config header with option in board.cfg

Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
2012-12-19 15:51:58 -07:00
Mike Frysinger
92ace272d0 fw_env: fix building w/out a config.h
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-12-19 15:51:57 -07:00
Mike Frysinger
7a546db2ff fw_env: fix incorrect usage of open(O_CREAT)
When using open(), the O_CREAT flag must be given a mode, otherwise it
uses random garbage from the stack.  Also, it can fail to build:

In file included from /usr/include/fcntl.h:290:0,
                 from fw_env_main.c:42:
In function 'open',
    inlined from 'main' at fw_env_main.c:97:9:
/usr/include/bits/fcntl2.h:50:24: error: call to '__open_missing_mode' declared
	with attribute error: open with O_CREAT in second argument needs 3 arguments

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-19 15:51:57 -07:00
Mike Frysinger
3779c8e319 fw_env: fix type of len
This variable is assigned by a size_t, and is printed that way, but is
incorrectly declared as an int.  Which means we get warnings:
fw_env.c: In function 'fw_setenv':
fw_env.c:409:5: warning: format '%zu' expects argument of type 'size_t',
	but argument 3 has type 'int' [-Wformat]

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-19 15:51:57 -07:00
Joe Hershberger
4823b45da2 Add a simple load option to setexpr
Make setexpr accept a 2 parameter variant that will simply load a value
into a variable.  This is useful for loading a value from memory.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-19 15:51:57 -07:00
Simon Glass
2400727318 spi: Add SPI flash test
It is useful to have a basic SPI flash test, which tests that the SPI chip,
the SPI bus and the driver are behaving.

This test erases part of the flash, writes data and reads it back as a
sanity check that all is well.

Use CONFIG_SF_TEST to enable it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-19 15:51:57 -07:00
James Miller
a683c288d4 spi: Add progress percentage and write speed to sf update
Output a progress update only at most 10 times per second, to avoid
saturating (and waiting on) the console. Make the summary line
to fit on a single line. Make sure that cursor sits at the end of
each update line instead of the beginning.

Sample output:

SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
Update SPI
1331200 bytes written, 2863104 bytes skipped in 21.912s, speed 199728 B/s

time: 21.919 seconds, 21919 ticks
Skipping verify

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: James Miller <jamesmiller@chromium.org>
Signed-off-by: Taylor Hutt <thutt@chromium.org>
[trini: Drop 'const' from bytes_per_second()]
Signed-off-by: Tom Rini <trini@ti.com>
2012-12-19 15:51:23 -07:00
Allen Martin
a098cf41fd Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged
Conflicts:
	README
	arch/arm/cpu/armv7/exynos/clock.c
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h
2012-12-19 13:02:36 -08:00
Tom Rini
095728803e Merge branch 'master' of git://git.denx.de/u-boot-net 2012-12-17 18:39:50 -07:00
Tom Rini
e80e588bb8 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2012-12-17 18:39:45 -07:00
Pantelis Antoniou
598cf6062e g_dnl: Properly terminate string list.
Well, not terminating the list causes very interesting crashes.
As in changing the vendor & product ID crashes. Fun.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2012-12-17 15:38:15 +01:00
Pantelis Antoniou
5a413cae6a g_dnl: Issue connect/disconnect as appropriate
Call usb_gadget_connect/usb_gadget_disconnect in g_dnl_bind/g_dnl_unbind.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2012-12-17 15:38:15 +01:00
Vincent Palatin
8b57e2f081 usb: properly detect empty mass storage media reader
When a USB card reader is empty, it will return "Not Ready - medium not
present" as Key Code Qualifier. In that situation, it's useless waiting
for the full timeout since the result won't change until the user
inserts a card.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-17 15:38:15 +01:00
Milind Choudhary
359439d288 usb: Clean up newly allocated device nodes in case of configuration failure
If probe of a newly connected device fails for some reason, clean up
the allocated entry in usb_dev array.

Signed-off-by: Milind Choudhary <milindc@codeaurora.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-17 15:38:15 +01:00
Vipin Kumar
b6d7852cf8 usbh/ehci: Increase timeout for enumeration
The current logic reads the port status just once after usb_hub_power_on and
expects the portstatus and portchange to report the connection status
immediately and correctly.

Few pen drives are not able to report both of them immediately ie. those pens
report the connection change but not the connected state after the first read.
This opportunity once lost is gone for ever because the u-boot, unlike linux or
any other OS, works in polling mode.

This patch modifies the logic to read the port status continuously until the
portstatus and portchange both report a connection change as well as a connected
state or no connection change and no connection. This logic is placed in a
timeout of 10 sec. At the end of it, the pen drive would have either reported a
ONE or a ZERO in bit 1 of portstatus as well as portchange.

It enhances the set of pen drives which can eventually be detected by u-boot

Note: This 10 second timeout is based purely on several experiments done with
the broken pen drives

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-12-17 15:38:15 +01:00
Richard Genoud
c5a927c61f usb documentation: fix typo
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
2012-12-17 15:38:15 +01:00
Lukasz Dalek
a33fada1c0 h2200: Add USB CDC ethernet support
Add support for ethernet over USB which can be used for e.g. booting
process. It works with tftp and dhcp clients code.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-12-17 15:38:14 +01:00
Lukasz Dalek
27460be60d pxa25x_udc: Remove usbdescriptors.h
usbdescriptors.h conflicts with linux/usb/ch9.h.
Remove it.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-12-17 15:38:14 +01:00
Yoshihiro Shimoda
e3bb3254f8 net: sh_eth: add support for SH7752
SH7752 has two fast ethernet controllers and two gigabit ethernet
controllers. It is similar to SH7757.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-12-15 12:28:24 -06:00
Joe Hershberger
65b0db831e net: Fix endianness bug in link-local
The ip is stored in network order, so we can't test it in host order.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
2012-12-15 12:28:23 -06:00
Simon Glass
85b1980273 net: Add tftp speed indication
This prints a tftp speed indication after the download completes. This
is the 3.6 MiB/s indicator below.

Tegra2 (SeaBoard) # tftp ...
Using asx0 device
TFTP from server 172.22.72.144; our IP address is 172.22.73.81
Filename '/tftpboot/uImage-user-seaboard-1'.
Load address: 0x408000
Loading: #################################################
         3.6 MiB/s
done

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-12-15 12:28:22 -06:00
trem
d8fb710fdd powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR
CONFIG_SYS_TFTP_LOADADDR is defined on severals boards,
but it's never used. So we can safely removed it.

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
2012-12-15 12:28:22 -06:00
Michal Simek
b4b81e83f5 phy: Add support for Marvell 88E1118R
Marvell 88E1118R has different uid then 88E1118.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Andy Fleming <afleming@freescale.com>
CC: Zang Roy-R61911 <tie-fei.zang@freescale.com>
CC: Kumar Gala <galak@kernel.crashing.org>
2012-12-15 12:28:22 -06:00
Ruchika Gupta
776e66e8f1 e1000e : Correct Rx Threshold granularity
In e1000e driver, Rx descriptor queue is used such that hardware can add only
one descriptor at a time. So the WTHRESH granularity in RXDCTL should be set
to single descriptor. This would ensure that every time controller fills a Rx
descriptor, it is flushed to host memory. Earlier this granularity was in
cache line units i.e 2 descriptors. This leads to controller always waiting
for 2 descriptors before flushing them out. But since not more than one Rx BD
is actually available , the accumulation condition never gets hit.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Vakul Garg <vakul@freescale.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>
2012-12-15 12:28:21 -06:00
Eric Benard
71779d5b87 m28evk/mx28evk: fix nand_update_full
- since commit 418396e212 nand write.raw
can take the number of page to be written as an argument. nand_update_full
is passing the size (in bytes) to nand write.raw. This value was previously
ignored but now breaks the write.
- this patch updates the default environment of these boards to provide a
pagecount instead of a size to nand write.raw.
- tested on a mx28evk with a 4k page NAND and on a custom board with a
2k page NAND.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-12-14 16:04:06 -06:00
Scott Wood
88c5c68ffa Merge remote-tracking branch 'origin/master' 2012-12-14 16:03:55 -06:00
Tom Rini
ebbf0d20aa Prepare v2013.01-rc2
Signed-off-by: Tom Rini <trini@ti.com>
2012-12-14 14:43:22 -07:00
Tom Rini
6e9005bd96 omap3_evm: Let CONFIG_EFI_PARTITION be set for SPL
The #ifdef here is not enough to stop part_efi.c from being built, only
being unused.  And with recent changes this now leads to warnings.  The
easiest solution here is to just let the garbage collection at link time
do its job.

Signed-off-by: Tom Rini <trini@ti.com>
2012-12-13 13:58:27 -07:00
Joe Hershberger
1d6cd0a3f6 env: Handle write-once ethaddr and serial# generically
Use the variable access flags to implement the protection for ethaddr
and serial# instead of hard-coding them.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:57 -07:00
Joe Hershberger
9d8d661d7f env: Implement the env delete command
Implement a way to delete more than one variable at a time.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:57 -07:00
Joe Hershberger
24ab5a1914 env: Add setenv force support
Now that we have support for permissions, add a way to override them.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
267541f776 env: Add support for access control to .flags
Add support for read-only, write-once, and change-default.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
fffad71bc4 env: Add a command to display details about env flags
Similar to the env callback command, this will show details about the
options available, the static list, and the currently active variables.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
30fd4fadb3 tools/env: Add environment variable flags support
Currently just validates variable types as decimal, hexidecimal,
boolean, ip address, and mac address.  Call
env_acl_validate_setenv_params() from setenv() in fw_env.c.

If the entry is not found in the env .flags, then look in the static
one. This allows the env to override the static definitions, but prevents
the need to have every definition in the environment distracting you.

Need to build in _ctype for isdigit for Linux.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
2598090b7e env: Add environment variable flags
Currently just validates variable types as decimal, hexidecimal,
boolean, ip address, and mac address.

If the entry is not found in the env ".flags", then look in the static
one. This allows the env to override the static definitions, but prevents
the need to have every definition in the environment distracting you.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
e080d545f8 env: Add a silent env handler
The silent variable now updates the global data flag anytime it is
changed as well as after the env relocation (in case its value is
different from the default env in such cases as NAND env)

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
849d5d9cda env: Add a console env handler
Remove the hard-coded console handler and use a callback instead

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
1cf0a8b2fb env: Add a loadaddr env handler
Remove the hard-coded loadaddr handler and use a callback instead

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
32057717e0 env: Add a baudrate env handler
Remove the hard-coded baudrate handler and use a callback instead

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Joe Hershberger
a9f51c9b43 env: Add a bootfile env handler
Remove the hard-coded bootfile handler and use a callback instead

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Joe Hershberger
5e2b3e0c59 env: Add a command to view callbacks
The callbacks can be bound, but are otherwise invisible.  Add a command
to show what callbacks are available.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

!!! fix callback command
2012-12-13 11:46:55 -07:00
Joe Hershberger
170ab11075 env: Add support for callbacks to environment vars
Add support for per-variable callbacks to the "hashtable" functions.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

!!!fix comment in callback
2012-12-13 11:46:55 -07:00
Joe Hershberger
be11235ab8 env: Hide '.' variables in env print by default
When printing all variables with env print, don't print variables that
begin with '.'.  If env print is called with a '-a' switch, then
include variables that begin with '.' (just like the ls command).

Variables printed explicitly will be printed even without the -a.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Joe Hershberger
ec8a252cd4 env: Use getenv_yesno() more generally
Move the getenv_yesno() to env_common.c and change most checks for
'y' or 'n' to use this helper.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00