Commit Graph

2735 Commits

Author SHA1 Message Date
Lei Wen
4137894e04 mmc: test mmc bus width on startup
For we don't know mmc bus width from reading registers, the only way
to check is to test.

Current compare offset is:
EXT_CSD_PARTITIONING_SUPPORT
EXT_CSD_ERASE_GROUP_DEF
EXT_CSD_REV
EXT_CSD_HC_ERASE_GRP_SIZE
EXT_CSD_SEC_CNT

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-11-03 02:14:59 -05:00
Lei Wen
0560db18ec mmc: change magic number to macro define
Previous magic number is hard to parse its meaning, change it to
respective macro definition

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: WOlfgang Denk <wd@denx.de>
2011-11-03 02:14:58 -05:00
Lei Wen
02d3ad3e19 mmc: mv_sdhci: fix 8bus width access for 88SV331xV5
Marvell 88SV331xV5 platform's sdhci host control is not very standard
with the spec in the 8bit handling. It need to set its private register
to switch to the 8bit mode which is not included in the standard sdhci
registers.

This patch mainly hacks the writeb method, and set its private register
if it find the driver is going to switch to the 8bit mode.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-11-03 02:14:58 -05:00
Lei Wen
02f3029f18 mmc: retry the cmd8 to meet 74 clocks requirement in the spec
For some controller it has dynamic clock gating, and only toggle out clk
when the first cmd0 send out, while some card strictly obey the 74
clocks rule, the interval may not be sufficient between the cmd0 and
this cmd8, retry to fulfil the clock requirement.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
2011-11-03 02:14:58 -05:00
Marek Vasut
07133f2e7b PXA: Add MMC driver using the generic MMC framework
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-11-03 02:14:58 -05:00
Kyle Moffett
ce5207e191 e1000: Allow direct access to the E1000 SPI EEPROM device
As a part of the manufacturing process for some of our custom hardware,
we are programming the EEPROMs attached to our Intel 82571EB controllers
from software using U-Boot and Linux.

This code provides several conditionally-compiled features to assist in
our manufacturing process:

  CONFIG_CMD_E1000:
    This is a basic "e1000" command which allows querying the controller
    and (if other config options are set) performing EEPROM programming.
    In particular, with CONFIG_E1000_SPI this allows you to display a
    hex-dump of the EEPROM, copy to/from main memory, and verify/update
    the software checksum.

  CONFIG_E1000_SPI_GENERIC:
    Build a generic SPI driver providing the standard U-Boot SPI driver
    interface.  This allows commands such as "sspi" to access the bus
    attached to the E1000 controller.  Additionally, some E1000 chipsets
    can support user data in a reserved space in the E1000 EEPROM which
    could be used for U-Boot environment storage.

  CONFIG_E1000_SPI:
    The core SPI access code used by the above interfaces.

For example, the following commands allow you to program the EEPROM from
a USB device (assumes CONFIG_E1000_SPI and CONFIG_CMD_E1000 are enabled):
  usb start
  fatload usb 0 $loadaddr 82571EB_No_Mgmt_Discrete-LOM.bin
  e1000 0 spi program $loadaddr 0 1024
  e1000 0 spi checksum update

Please keep in mind that the Intel-provided .eep files are organized as
16-bit words.  When converting them to binary form for programming you
must byteswap each 16-bit word so that it is in little-endian form.

This means that when reading and writing words to the SPI EEPROM, the
bit ordering for each word looks like this on the wire:

  Time >>>
------------------------------------------------------------------
  ... [7, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8], ...
------------------------------------------------------------------
  (MSB is 15, LSB is 0).

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:37:01 +02:00
Kyle Moffett
2326a94db1 e1000: Export core EEPROM access functions for SPI support
A followup patch will be adding a configurable feature to enable
programming of E1000 EEPROMs from the command line or via the generic
U-Boot SPI interface.

In order for it to work it needs access to certain E1000-internal
functions, so export those in the e1000.h header file.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:35:26 +02:00
Kyle Moffett
114d7fc053 e1000: Rewrite EEPROM checksum error to give more information
As an aide to debugging, we should print out the expected value of the
EEPROM checksum in addition to just saying that it is wrong.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:35:08 +02:00
Kyle Moffett
d60626f8c1 e1000: Restructure and streamline PCI device probing
By allocating the e1000 device structures much earlier, we can easily
generate better error messages and siginficantly clean things up.

The only user-visable change (aside from reworded error messages) is
that a detected e1000 device which fails to initialize due to software
or hardware error will still be allocated a device number.

As one example, consider a system with 2 e1000 PCI devices where the
first controller has a corrupted EEPROM.  Using the old code the
second controller would be "e1000#0", while with this change it would be
"e1000#1".

This change should hopefully make such EEPROM errors much more
straightforward to handle correctly in boot scripts and the like.

It is also necessary for a followup patch which allows SPI programming
of an e1000 controller's EEPROM even if the checksum is invalid.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:34:40 +02:00
Kyle Moffett
987b43a1d7 e1000: Clean up handling of dual-port NICs and support 82571
Consolidate the test for a dual-port NIC to one location for easy
modification, then fix support for the dual-port 82571.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2011-10-28 00:34:25 +02:00
Wolfgang Denk
87a5d60103 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
2011-10-28 00:15:19 +02:00
Marek Vasut
7a129a5592 GCC4.6: Use debug() instead of debugX() in s3c24xx_nand.c
The debugX() macro was always used with debug level 1. There is no point to use
it here instead of debug().

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:08 +02:00
Marek Vasut
eda959f340 GCC4.6: Squash warnings in fec_mxc.c
fec_mxc.c: In function 'fec_mii_setspeed':
fec_mxc.c:112:2: warning: format '%#lx' expects type 'long unsigned int', but
argument 2 has type 'u32'
fec_mxc.c: In function 'fec_recv':
fec_mxc.c:632:2: warning: format '%x' expects type 'unsigned int', but argument
2 has type 'long unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:08 +02:00
Marek Vasut
458f438169 GCC4.6: Squash warning in bus_vcxk.c
bus_vcxk.c:167:2: warning: format '%d' expects type 'int', but argument 2 has
type 'u_long'
bus_vcxk.c:167:2: warning: format '%d' expects type 'int', but argument 3 has
type 'u_long'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:07 +02:00
Marek Vasut
99724a2d91 GCC4.6: Squash warnings in ks8695eth.c
ks8695eth.c:199:2: warning: format '%x' expects type 'unsigned int', but
argument 4 has type 'volatile void *'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:07 +02:00
Marek Vasut
b89c708bb7 GCC4.6: Squash warnings in lattice.c
lattice.c:319:4: warning: format '%x' expects type 'unsigned int', but argument
3 has type 'const char *'
lattice.c:319:4: warning: format '%x' expects type 'unsigned int', but argument
4 has type 'long unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:07 +02:00
Marek Vasut
2e8f6419aa GCC4.6: Squash warnings in kirkwood_spi.c
kirkwood_spi.c:125:2: warning: format '%08X' expects type 'unsigned int', but
argument 4 has type 'const void *'
kirkwood_spi.c:125:2: warning: format '%08X' expects type 'unsigned int', but
argument 5 has type 'void *'
kirkwood_spi.c:160:5: warning: format '%08x' expects type 'unsigned int', but
argument 2 has type 'void *'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:07 +02:00
Marek Vasut
79ad544009 GCC4.6: Squash warnings in smsc95xx.c
smsc95xx.c: In function 'smsc95xx_write_hwaddr':
smsc95xx.c:380:2: warning: dereferencing type-punned pointer will break
strict-aliasing rules

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:07 +02:00
Marek Vasut
a231f04f1a GCC4.6: Fix warnings in pxa_mmc.c
pxa_mmc.c: In function 'mmc_cmd':
pxa_mmc.c:77:2: warning: format '%08x' expects type 'unsigned int', but argument
2 has type 'ulong'
pxa_mmc.c: In function 'mmc_block_read':
pxa_mmc.c:110:2: warning: format '%d' expects type 'int', but argument 4 has
type 'ulong'
pxa_mmc.c: In function 'pxa_mmc_write':
pxa_mmc.c:327:2: warning: format '%lx' expects type 'long unsigned int', but
argument 2 has type 'uchar *'
pxa_mmc.c:349:2: warning: format '%lx' expects type 'long unsigned int', but
argument 2 has type 'uchar *'
pxa_mmc.c:354:3: warning: format '%lx' expects type 'long unsigned int', but
argument 2 has type 'uchar *'
pxa_mmc.c:362:2: warning: format '%lx' expects type 'long unsigned int', but
argument 2 has type 'uchar *'
pxa_mmc.c:367:3: warning: format '%lx' expects type 'long unsigned int', but
argument 2 has type 'uchar *'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:06 +02:00
Marek Vasut
66d1a2e3bb GCC4.6: Squash error in pcmcia/i82365.c
i82365.c: In function 'cirrus_set_opts':
i82365.c:329: error: 'buf' undeclared (first use in this function)
i82365.c:329: error: (Each undeclared identifier is reported only once
i82365.c:329: error: for each function it appears in.)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:05 +02:00
Marek Vasut
3ebafbf697 GCC4.6: Squash warnings in tqm8xx_pcmcia.c
tqm8xx_pcmcia.c: In function 'power_off':
tqm8xx_pcmcia.c:46: warning: passing argument 1 of 'out_be32' makes pointer from
integer without a cast
tqm8xx_pcmcia.c: In function 'power_on_5_0':
tqm8xx_pcmcia.c:52: warning: passing argument 1 of 'out_be32' makes pointer from
integer without a cast
tqm8xx_pcmcia.c: In function 'power_on_3_3':
tqm8xx_pcmcia.c:58: warning: passing argument 1 of 'out_be32' makes pointer from
integer without a cast

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:05 +02:00
Marek Vasut
5779a9e2c3 GCC4.6: Squash warnings in sata_sil3114.c
sata_sil3114.c: In function 'sata_identify':
sata_sil3114.c:174: warning: format '%x' expects type 'unsigned int', but
argument 2 has type 'lbaint_t'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:05 +02:00
Marek Vasut
d015df8fb1 GCC4.6: Squash warnings in fsl_pci_init.c
fsl_pci_init.c: In function 'fsl_pci_init':
fsl_pci_init.c:308: warning: format '%08x' expects type 'unsigned int', but
argument 6 has type 'long unsigned int'
fsl_pci_init.c:347: warning: format '%x' expects type 'unsigned int', but
argument 2 has type 'volatile u32 *'

fsl_pci_init.c: In function 'fsl_pci_init':
fsl_pci_init.c:308: warning: format '%016llx' expects type 'long long unsigned
int', but argument 4 has type 'pci_addr_t'
fsl_pci_init.c:308: warning: format '%016llx' expects type 'long long unsigned
int', but argument 5 has type 'pci_size_t'
fsl_pci_init.c:308: warning: format '%08x' expects type 'unsigned int', but
argument 6 has type 'long unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:05 +02:00
Marek Vasut
5cc08a179f GCC4.6: Squash warnings in fsl_espi.c
fsl_espi.c: In function 'spi_setup_slave':
fsl_espi.c💯 warning: format '%d' expects type 'int', but argument 3 has type
'long unsigned int'
fsl_espi.c: In function 'spi_xfer':
fsl_espi.c:237: warning: format '%08x' expects type 'unsigned int', but argument
5 has type 'const void *'
fsl_espi.c:237: warning: format '%08x' expects type 'unsigned int', but argument
7 has type 'void *'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:05 +02:00
Marek Vasut
1a928ed964 GCC4.6: Squash warnings in ahci.c
ahci.c: In function 'ahci_port_start':
ahci.c:401: warning: format '%x' expects type 'unsigned int', but argument 2 has
type 'struct ahci_cmd_hdr *'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:04 +02:00
Marek Vasut
c97e74afcb GCC4.6: Squash warnings in 4xx_enet.c
4xx_enet.c: In function 'ppc_4xx_eth_init':
4xx_enet.c:1352: warning: format '%08x' expects type 'unsigned int', but
argument 2 has type 'volatile struct mal_desc_t *'
4xx_enet.c:1352: warning: format '%08x' expects type 'unsigned int', but
argument 3 has type 'volatile struct mal_desc_t *'
4xx_enet.c:1365: warning: format '%08lx' expects type 'long unsigned int', but
argument 3 has type 'unsigned int'
4xx_enet.c:1376: warning: format '%08lx' expects type 'long unsigned int', but
argument 3 has type 'unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:04 +02:00
Marek Vasut
f382b7c58e GCC4.6: Squash warning in jedec_flash.c
jedec_flash.c: In function 'fill_info':
jedec_flash.c:393: warning: format '%x' expects type 'unsigned int', but
argument 2 has type 'ulong'
jedec_flash.c:393: warning: format '%x' expects type 'unsigned int', but
argument 3 has type 'ulong'
jedec_flash.c:402: warning: format '%d' expects type 'int', but argument 2 has
type 'ulong'
jedec_flash.c:402: warning: format '%d' expects type 'int', but argument 3 has
type 'ulong'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Scott Wood <scottwood@freescale.com>
2011-10-27 23:54:04 +02:00
Marek Vasut
31d34143bb GCC4.6: Squash warning in cfi_flash.c
cfi_flash.c: In function 'flash_protect_default':
cfi_flash.c:2152: warning: format '%08x' expects type 'unsigned int', but
argument 2 has type 'ulong'
cfi_flash.c:2152: warning: format '%08x' expects type 'unsigned int', but
argument 3 has type 'long unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Scott Wood <scottwood@freescale.com>
2011-10-27 23:54:04 +02:00
Marek Vasut
68da5b1911 GCC4.6: Squash warning in cfb_console.c
cfb_console.c: In function 'video_display_bitmap':
cfb_console.c:1148: warning: format '%d' expects type 'int', but argument 2 has
type 'long unsigned int'
cfb_console.c:1148: warning: format '%d' expects type 'int', but argument 3 has
type 'long unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:04 +02:00
Chandan Nath
5289e83a8c ARM:AM33XX: Add support for TI AM335X EVM
This patch adds basic support for booting the board.
This patch adds support for the UART necessary to
get to the u-boot prompt.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:36 +02:00
Manjunath Hadli
fb1d6332b5 davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
remove macro CONFIG_EMAC_MDIO_PHY_NUM and depending macro EMAC_MDIO_PHY_NUM
as they are no longer needed with the support for more than 1 PHYs in davinci
emac driver.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:36 +02:00
Manjunath Hadli
062fe7d332 davinci: emac: add support for more than 1 PHYs
add support for more than 1 PHYs. Many of the davinci platforms have more
than 1 PHYs on thier board. This patch extends support in davinci emac
driver for upto 3 PHYs.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:36 +02:00
Manjunath Hadli
cc4bd47f4f davinci: emac: add new features to autonegotiate for EMAC
add more features like DUPLEX, 100MB link speed etc to auto negotiate
in EMAC driver. EMAC controller autonegotiates for these features with
PHYs which are on the board.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:36 +02:00
Tom Rini
1037d585d3 mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
Not all omap families define OMAP_HSMMC[23]_BASE so condition those
cases in omap_mmc_init().

Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:35 +02:00
Simon Schwarz
4c4bb19d05 omap3: Add interface for omap3 DMA
Adds an interface to use the OMAP3 DMA.

Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:34 +02:00
Michael Walle
efa4e43a40 kirkwood_spi: add dummy spi_init()
The spi_init() function is missing. Add it.

Signed-off-by: Michael Walle <michael@walle.cc>
2011-10-27 21:56:33 +02:00
Lei Wen
71f13a21dc gpio: mvmfp: reduce include platform file
Build pass with following config:
dkb_config
aspenite_config

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27 21:56:33 +02:00
Lei Wen
93554271b9 serial: reduce include platform file for marvell chip
Build pass with following config:
dkb_config
aspenite_config
edminiv2_config
openrd_ultimate_config
sheevaplug_config
mv88f6281gtw_ge_config
rd6281a_config
guruplug_config
km_kirkwood_config

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Wolfgang Denk <wd@denx.de>
2011-10-27 21:56:33 +02:00
Lei Wen
a7efd719f4 ARM: kirkwood: reduce dependence of including platform file
For files like the drivers/serial/serial.c, it must include the
platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the
definition in the platform definition files.

Include the platform definition file in the config file, so that it
would decouple the dependence for the driver files.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27 21:56:33 +02:00
Ajay Bhargav
51100cfcca SPI: Add SPI driver support for Marvell Armada100
This patch provides support for SPI emulated over SSP for Marvell
Armada100 SOC.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2011-10-27 21:56:32 +02:00
Stefano Babic
f8f96129bf misc: pmic: drop old Freescale's pmic driver
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:32 +02:00
Stefano Babic
b7b7d3ccfd misc: pmic: addI2C support to pmic_fsl driver
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Stefano Babic
d69edadee7 misc: pmic: use I2C_SET_BUS in pmic I2C
Instead of using directly the i2c_set_bus() function,
the I2C_SET_BUS macro must be used to avoid build
errors for targets without multibus I2C.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Stefano Babic
4380075e41 RTC: Switch mc13783 to generic pmic code
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Stefano Babic
b2e5add3b2 misc: pmic: Freescale PMIC switches to generic PMIC driver
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Łukasz Majewski
993858585d misc:pmic:max8998 MAX8998 support at a new PMIC driver.
This commit adds support for MAX8998 PMIC driver.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Łukasz Majewski
e542b7f0a2 misc:pmic:core New generic PMIC driver
I2C or SPI PMIC devices can be accessed.
Separate files: pmic_i2c.c and pmic_spi.c are responsible
for handling transmission over I2C or SPI bus.

New flags:
CONFIG_PMIC - enable PMIC general device.
CONFIG_PMIC_I2C/SPI - specify the interface to be used.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Marek Vasut
b567b8ff79 I2C: Add i2c_get/set_speed() to mxc_i2c.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2011-10-27 21:56:30 +02:00
Tom Warren
ccf7988b9a tegra2: Enable MMC for Seaboard
This adds the required GPIO and pinmux configuration to make eMMC / SD work
on Seaboard.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-27 21:56:29 +02:00
Simon Glass
4ed59e70e4 tegra2: Add more clock functions
This adds most of the clock functions required by board and driver code:

-query and adjust peripheral clocks
-query and adjust PLLs
-reset and enable control

These functions are plumbed in as required.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-27 21:56:29 +02:00
Joachim Foerster
70d52f9a4e altera_tse: Fix return of eth_device's recv() callback
It seems to be good practice to return the number of received bytes in the
eth_device's recv() callback, here: tse_eth_rx().

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:29:08 +02:00
Joachim Foerster
15eb106966 altera_tse: m88e1111s: Honor device flags regarding PHY interface mode
Note: This is kind of guess work. The current code is preserved for
all RGMII related modes. It is different for flags=0 (GMII) and flags=5
(SGMII). The last case, SGMII, is successfully tested on
Altera's Terasic DE4.

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:28:18 +02:00
Joachim Foerster
b962ac794a altera_tse: Add support for dedicated descriptor memory
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:27:37 +02:00
Joachim Foerster
29095f1a5c altera_tse: Fix SGDMA reset triggering
The SW_RESET needs to be set instead of being masked out!

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:26:48 +02:00
Joachim Foerster
337aff53f6 altera_tse: Clear SGDMA's RUN bit in async transfer, like in sync case
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:25:42 +02:00
Anton staaf
a1969923c9 mmc: dcache: allocate cache aligned buffers for ext_csd
Currently the mmc_change_freq and mmc_startup functions allocates
buffers on the stack that are passed down to the MMC device driver.
These buffers could be unaligned to the L1 dcache line size.  This
causes problems when using DMA and with caches enabled.

This patch correctly cache alignes the buffers used for reading the
ext_csd data from an MMC device.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-10-25 09:26:14 +02:00
Anton staaf
f781dd383a mmc: dcache: allocate cache aligned buffer for scr and switch_status
Currently the sd_change_freq function allocates two buffers on the
stack that it passes down to the MMC device driver.  These buffers
could be unaligned to the L1 dcache line size.  This causes problems
when using DMA and with caches enabled.

This patch correctly cache alignes the buffers used for reading the
scr register and switch status values from an MMC device.

Change-Id: Ifa8414f572ef907681bd2d5ff3950285a215357d
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25 09:25:13 +02:00
Mike Frysinger
5de78b17f0 net: sc589: drop unused !NET_MULTI driver
No boards appear to use this driver, and it doesn't support NET_MULTI,
so punt the old driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Mike Frysinger
c1761eeab0 net: s3c4510b_eth: drop unused !NET_MULTI driver
No boards appear to use this driver, and it doesn't support NET_MULTI,
so punt the old driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Mike Frysinger
8b710b163b net: ns9750: drop !NET_MULTI driver
Only one board uses this driver (ns9750dev), but the board doesn't seem
to have an entry to actually build it in the Makefile/boards.cfg, so just
delete net support from its board config.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Mike Frysinger
ae6edb54c0 net: enc28j60_lpc2292: drop unused !NET_MULTI driver
Everyone seems to have converted to the new enc28j60 driver, so drop
this older one which isn't used and doesn't support NET_MULTI.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Michal Simek
c1044a1ec1 net: emaclite: Move RX/TX ping pong initialization to
Init RX/TX ping pong directly from board not in the driver.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23 23:32:44 +02:00
Michal Simek
9b94755af9 net: emaclite: Use unsigned long for baseaddr
Baseaddr should be unsigned long.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23 23:32:44 +02:00
Shaohui Xie
23d8f778c8 spi/eon: add support for new EON spi flash EN25Q32B
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
2011-10-23 23:32:43 +02:00
Simon Glass
f8df9d0d1a NS16550: trivial code clean for checkpatch
This removes most checkpatch warnings from the ns16550 driver and its
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-23 20:19:53 +02:00
Michal Simek
8cb9b23755 serial: uartlite: Fix compilation warnings
Do not setup userial_ports array as const because
in uartlite_serial_putc is out_be32 which can't write
to tx_fifo if is const.

Warning log:
serial_xuartlite.c: In function 'uartlite_serial_putc':
serial_xuartlite.c:60: warning: initialization discards qualifiers from pointer target type
serial_xuartlite.c: In function 'uartlite_serial_getc':
serial_xuartlite.c:78: warning: initialization discards qualifiers from pointer target type
serial_xuartlite.c: In function 'uartlite_serial_tstc':
serial_xuartlite.c:87: warning: initialization discards qualifiers from pointer target type

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23 10:51:11 +02:00
Anatolij Gustschin
c4c9fbebae consolidate mdelay by providing a common function for all users
There are several mdelay() definitions in the driver and
board code. Remove them all and provide a common mdelay()
in lib/time.c.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22 01:16:08 +02:00
Tang Yuantian
83c484d7ec drivers: add the support for Silicon Image SATA controller
Add the Silicon Image series PCI Express to
Serial ATA controller support, including Sil3132,
Sil3131 and Sil3124.
The SATA controller can be used to load kernel.

The features list:
	- Supports 1-lane 2.5 Gbit/s PCI Express
	- Supports one/two/four independent Serial ATA channels
	- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
	- Supports LBA28 and LBA48

Signed-off-by: Tang Yuantian <b29983@freescale.com>
Signed-off-by: Aaron Williams <Aaron.Williams@cavium.com>
Tested-by: Lan Chunhe <b25806@freescale.com>
2011-10-22 01:03:54 +02:00
Dirk Eibach
486cad03be gpio: Add PCA9698 40-bit I2C I/O port
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2011-10-22 00:43:45 +02:00
Linus Walleij
96baa4c376 serial: pl01x: drain PL01x FIFO before baudrate change
Not draining the FIFO and waiting for the UART to be non-busy
before changing baudrate results in crap characters on the
console, so let's wait for the FIFO to drain and the last
character to be clocked out before we do that.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-22 00:42:04 +02:00
Linus Walleij
df6a36fbef net: dc2114x: check for apropriate command
The code had two paths depending on whether the card was to be
accessed from plain memory or the IO region. However the error
path checks whether IO region was obtained - twice. Fix up the
error path according to the probable intention.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-22 00:37:49 +02:00
Macpaul Lin
55b438a919 ftgmac100: reset fix when supports wake on lan
This patch move the reset function from initialization to
driver register procedure.

Some embedded system supports wake on lan nowadays. On this kind of system,
the ftgmac100 will be still supplied power after the system has been
shut-down by Linux. Hence the register used by linux won't be clear
when the system has been powered-off.

The origin ftgmac100 driver in u-boot will only register
driver and functions to network stack and won't reset the ftgmac100
hardware if the network won't be used during boot-up.
This will lead ftgmac100 continue receiving packets and then might corrupt
linux kernel when booting up.

So we reorder the hardware reset function earlier to force the hardware
to be reset whether it will be used or not.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22 00:36:12 +02:00
Timur Tabi
a836626cc4 powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)
The work-around for P4080 erratum SERDES9 says that the SERDES receiver
lanes should be reset after the XAUI starts tranmitting alignment signals.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-20 16:01:37 -05:00
Kumar Gala
f5b9e73641 fm: Don't allow disabling of FM1-DTSEC1
The MDIO controller to talk to external PHYs is on FM1-DTSEC1 so don't
allow disabling.  If we disable it we end up powering the block down in
the SoC and thus can't communicate to any external PHYs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18 00:36:15 -05:00
Kumar Gala
e81c0aba9a fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
FM1-DTSEC1's MAC was being marked as disabled if the port was not
configured based on the SoC configuration.  However we utilize the MAC
interface for MDIO and thus should NOT mark it disabled.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18 00:36:15 -05:00
Simon Glass
efb2172ece Move timestamp and version files into 'generated' subdir
There is a rather subtle build problem where the build time stamp is not
updated for out-of-tree builds if there exists an in-tree build which
has a valid timestamp file. So if you do an in-tree build, then an
out-of-tree build your timestamp will not change.

The correct timestamp_autogenerated.h lives in the object tree, but it
is not always found there. The source still lives in the source tree and
when compiling version.h, it includes timestamp_autogenerated.h. Since
the current directory is always searched first, this will come from the
source tree rather than the object tree if it exists there. This affects
dependency generation also, which means that common/cmd_version.o will not
even be rebuilt if you have ever done an in-tree build.

A similar problem exists with the version file.

This change moves both files into the 'generated' subdir, which is already
used for asm-offsets.h. Then timestamp.h and version.h are updated to
include the files from there.

There are other places where these generated files are included, but I
cannot see why these don't just use the timestamp.h and version.h headers.
So this change also tidies that up.

I have tested this with in- and out-of-tree builds, but not SPL. I have
looked at various other options for fixing this, including sed on the dep
files, -I- and -include flags to gcc, but I don't think they can be made
to work. Comments welcome.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-17 23:57:00 +02:00
Simon Glass
7accb6ea56 sandbox: Add serial uart
This uart simply writes to stdout and reads from stdin. We might imagine
instead buffering the data so that a test interface can check output and
inject input.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-17 23:56:58 +02:00
Jason Hobbs
4d91a6ecab Replace space and tab checks with isblank
These are various places I found that checked for conditions equivalent
to isblank.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17 22:25:34 +02:00
Jason Jin
5c1d082b14 DM9000:Add a byte swap macro for dm9000 io operation.
commit a45dde2293 changed the dm9000
direct register access to standard IO. This should work
on the ColdFire platform as there are corresponding macros for
the LE devices. But the hardware settings on some ColdFire boards had
swapped the byte order which make the original macros such as out_le16
cannot work. To avoid changing the common io access code on ColdFire
platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use
__raw* IO access on some ColdFire boards.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2011-10-17 22:25:33 +02:00
Holger Brunck
e5afdf584c kw_gpio: fix error in kw_gpio_direction_input
The function kw_gpio_is_valid returns zero on success, so
adapt the error check accordingly.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Dieter Kiermaier <dk-arm-linux@gmx.de>
2011-10-17 22:25:33 +02:00
Mike Frysinger
0d2b0a8f45 Blackfin: bfin_spi: fix build error when DEBUG is defined
The new debug() changes pointed out debug code that rotted a little.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-17 22:25:33 +02:00
Helmut Raiger
82a04900a5 video: Moving mx3fb.c to CONFIG_VIDEO
mx3fb.c was based on CONFIG_LCD and is moved by this patch to
CONFIG_VIDEO, which has greater freedom in selecting videomodes
even at runtime.

This renders the accumulating list of display defines
(CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as
these may be setup through env variables:

uboot> setenv mydisplay 'video=ctfb240,y:320,depth:16,mode:0,pclk:185925,
	le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0'
uboot> setenv videomode ${mydisplay}

This commit also fixes the board config files for qong and
imx31_phycore boards as needed. The videomode settings of
previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS
now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased
to make the frame buffer allocation working with the changed
driver.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-17 22:25:32 +02:00
Marek Vasut
711a6722f9 MX5: Make IPU display output and pixel format configurable
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-10-17 22:25:32 +02:00
Stefano Babic
3d1d5e2379 VIDEO: MX5: export pix format
Pixel format defines must be available for boards to set up
the right display. Move them and export in a new file.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Anatolij Gustschin <agust@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-10-17 22:25:32 +02:00
Stefano Babic
63f832fbb8 VIDEO: MX5: Switch MX5 to CONFIG_VIDEO
The framebuffer driver for MX5 is based on CONFIG_LCD.
In the current implementation, there is a serious bug
because the required memory is allocated before
relocation, but the driver knows only later which is
the resolution of the display. The patch switches the driver
to CONFIG_VIDEO and the memory is allocated by the driver itself.

We also need to switch the vision2 board code and config file
in the same commit so that this commit will be bisectable.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Anatolij Gustschin <agust@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-10-17 22:25:31 +02:00
Timur Tabi
3c59e3986c video: update the Freescale DIU driver to use linux/fb.h
Update the Freescale DIU video driver (fsl_diu_fb.c) to use linux/fb.h.
Some data structures from this header file were just copied into
fsl_diu_fb.c.

Signed-off-by: Timur Tabi <timur@freescale.com>
2011-10-17 22:25:31 +02:00
Anatolij Gustschin
0da1fb03c5 pci: move pcidelay code to new location just before PCI bus scan
PCI cards might need some time after reset to respond. On some
boards (mpc5200 or mpc8260 based) the PCI bus reset is deasserted
at pci_init_board() time, so we currently can not use available
"pcidelay" option for waiting before PCI bus scan since this
waiting takes place before calling pci_init_board(). By moving
the pcidelay code to the new location using of the "pcidelay"
option is possible on mpc5200 or mpc8260 based boards, too.

Since pci_hose_scan() could be called multiple times, restrict
the function to wait only during its first call and to ignore
pcidelay for any further call (as pointed out by Matthias).

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Tested-by: Matthias Fuchs <matthias.fuchs@esd.eu>
2011-10-15 22:16:53 +02:00
Michal Simek
4f1ec4c176 net: axi_ethernet: Add driver to u-boot
Add axi_ethernet driver for little-endian Microblaze.

RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs.
Only one MAC can work in one time.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-15 22:12:05 +02:00
Michal Simek
5ac83801f9 net: emaclite: Fix coding style
Coding style should follow linux coding style.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-15 22:09:43 +02:00
Michal Simek
8043925204 net: emaclite: Use PKTSIZE directly
Do not setup additional ENET_MAX_MTU macro.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-15 22:09:27 +02:00
Michal Simek
947324b9ca net: emaclite: Setup RX/TX ping pong for every instance
Setup RX/TX ping-pong buffer for every emaclite IP separately.
The next patch move initialization directly to board code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-15 22:06:38 +02:00
Timur Tabi
2339e4972f phylib: wait for TN2020 to achieve SERDES lane alignment at startup
Before the Teranetics TN2020 PHY can be used, the SERDES lanes need to be
aligned, so wait for lane alignment before completing the startup sequence.

Note that this process can take up to three seconds.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-13 23:38:11 -05:00
Timur Tabi
7f92c3a275 powerpc/p3060: remove all references to RCW bits EC1_EXT, EC2_EXT, and EC3
The EC1_EXT, EC2_EXT, and EC3 bits in the RCW don't officially exist on the
P3060 and should always be set to zero.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-13 23:38:10 -05:00
Wolfgang Denk
d8fffa057c Merge branch 'master' of git://git.denx.de/u-boot-mips
* 'master' of git://git.denx.de/u-boot-mips:
  MIPS: Jz4740: Add qi_lb60 board support
  MIPS: Jz4740: Add NAND driver
  MIPS: Ingenic XBurst Jz4740 processor support
2011-10-12 22:47:15 +02:00
Wolfgang Denk
f6d99aa947 Merge branch 'master' of git://git.denx.de/u-boot-ubi
* 'master' of git://git.denx.de/u-boot-ubi:
  UBI: init eba tables before wl when attaching a device
  ubifs bad superblock bug
2011-10-12 22:44:36 +02:00
Wolfgang Denk
e5a0717176 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
* 'master' of git://git.denx.de/u-boot-nand-flash:
  NAND: davinci: choose correct 1-bit h/w ECC reg
2011-10-12 22:43:54 +02:00
Xiangfu Liu
3a6591a86a MIPS: Jz4740: Add NAND driver
Jz4740 NAND flash controller can support:
* MLC NAND as well as SLC NAND
* all 8-bit/16-bit NAND flash devices
* HAMMING and RS hardware ECC
* automatic boot up from NAND flash devices

nand_ecclayout is set up for 2GiB NAND chip mounted in Qi LB60.
We'll bring up boot-from-NAND support in nand_spl/ in the future.

Signed-off-by: Xiangfu Liu <xiangfu@openmobilefree.net>
Acked-by: Daniel <zpxu@ingenic.cn>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-10-12 23:28:37 +09:00
Holger Brunck
d63894654d UBI: init eba tables before wl when attaching a device
This fixes that u-boot gets stuck when a bitflip was detected
during "ubi part <ubi_device>". If a bitflip was detected UBI tries
to copy the PEB to a different place. This needs that the eba table
are initialized, but this was done after the wear levelling worker
detects the bitflip. So changes the initialisation of these two
tasks in u-boot.

This is a u-boot specific patch and not needed in the linux layer,
because due to commit 1b1f9a9d00
UBI: Ensure that "background thread" operations are really executed
we schedule these tasks in place and not as in linux after the inital
task which schedule this new task is finished.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-10-12 11:36:05 +02:00
Laurence Withers
6016194371 NAND: davinci: choose correct 1-bit h/w ECC reg
In nand_davinci_readecc(), select the correct NANDF<n>ECC register based
on CONFIG_SYS_NAND_CS rather than hardcoding the choice of NANDF1ECC.
This allows 1-bit hardware ECC to work with chip select other than CS2.

Note this now matches the usage in nand_davinci_enable_hwecc(), which
already had the correct handling, and allows refactoring to a single
function encapsulating the register read.

Without this fix, writing NAND pages to a chip not wired to CS2 would
result in in the ECC calculation always returning FFFFFF for each
512-byte segment, and reading back a correctly written page (one with
ECC intact) would always fail. With this fix, the ECC is written and
verified correctly.

Signed-off-by: Laurence Withers <lwithers@guralp.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-10-10 15:28:05 -05:00
Tang Yuantian
007a28d54d fsl_sata: Fix compile error when CONFIG_LBA48 is not defined
If CONFIG_LBA48 is not defined, the element lba48 of struct sata_dev_desc
is not avaible, and can't be used.

Signed-off-by: Tang Yuantian <b29983@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-09 17:57:54 -05:00