Commit Graph

107 Commits

Author SHA1 Message Date
Heinrich Schuchardt
0c9ac06a28 efi_loader: create fdt reservation before copy
When copying the device we must ensure that the copy does not fall into a
memory area reserved by the same.

So let's change the sequence: first create memory reservations and then
copy the device tree.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Heinrich Schuchardt
16b615d9ab efi_loader: fix memory mapping for sandbox
The sandbox is using a virtual address space which is neither the physical
address space of the operating system nor the virtual address space in
which Linux aplications live. The addresses used insided the flattened
device tree use this sandbox virtual address space. The EFI subsystem uses
the virtual address space of the operating system and this is where the fdt
is stored.

Fix all incorrect addresses for the fdt in cmd/bootefi.cmd.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Heinrich Schuchardt
c3772ca1e3 efi_loader: macro efi_size_in_pages()
When allocating EFI memory pages the size in bytes has to be converted to
pages.

Provide a macro efi_size_in_pages() for this conversion.
Use it in the EFI subsystem and correct related comments.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Simon Glass
5e2f039107 efi: Rename bootefi_test_finish() to bootefi_run_finish()
This function can be used from do_bootefi_exec() so that we use mostly the
same code for a normal EFI application and an EFI test.

Rename the function and use it in both places.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Simon Glass
f4f0f7cb6e efi: Create a function to set up for running EFI code
There is still duplicated code in efi_loader for tests and normal
operation.

Add a new bootefi_run_prepare() function which holds common code used to
set up U-Boot to run EFI code. Make use of this from the existing
bootefi_test_prepare() function, as well as do_bootefi_exec().

Also shorten a few variable names.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Simon Glass
d9717eae31 efi: Split out test init/uninit into functions
The functions in bootefi are very long because they mix high-level code
and control with the low-level implementation. To help with this, create
functions which handle preparing for running the test and cleaning up
afterwards.

Also shorten the awfully long variable names here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Simon Glass
2ab7ef74cd efi: Check for failure to create objects in selftest
At present a few error conditions are not checked. Before refactoring
this code, add some basic checks. Note that this code still leaks memory
in the event of error. This will be tackled after the refactor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Heinrich Schuchardt
23fd84b3ec efi_loader: carving out memory reservations
The "Devicetree Specification 0.2" does not prescribe that memory
reservations must be EFI page aligned. So let's not make such an
assumption in our code.

Do not carve out the pages for the device tree. This memory area is
already marked as EFI_RUNTIME_SERVICES_DATA.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Heinrich Schuchardt
4574d1b3d1 efi_loader: memory reservation for fdt
In copy_fdt() we allocate EFI pages for the fdt plus extra 12 KiB as
EFI_RUNTIME_SERVICES_DATA. Afterwards in efi_install_fdt() we overwrite
part of this memory allocation by marking it as EFI_BOOT_SERVICES_DATA.

Remove the code marking the fdt as EFI_BOOT_SERVICES_DATA.

Cf. commit 17ff6f02f5 ("efi_loader: store DT in EFI_RUNTIME_SERVICES_DATA
memory")

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Heinrich Schuchardt
e1fec152fe efi_loader: fix typos
Fix typos in EFI subsystem comments.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
AKASHI Takahiro
f1589ffb33 efi_loader: add efi_dp_from_name()
Factor out efi_set_bootdev() and extract efi_dp_from_name().
This function will be used to set a boot device in efishell command.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Heinrich Schuchardt
d39646a38b efi_loader: rename parent to header
Rename the component parent of some EFI objects to header. This avoids
misunderstandings.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Heinrich Schuchardt
faea104105 efi_loader: typedef struct efi_object *efi_handle_t
All our handles point to a struct efi_object. So let's define the
efi_handle_t accordingly. This helps us to discover coding errors much
more easily. This becomes evident by the corrections to the usage of
handles in this patch.

Rename variable image_handle to image_obj where applicable.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Heinrich Schuchardt
1e1e1c27c5 efi_loader: execute efi_save_gd() first
If DEBUG is defined we may be calling EFI_CALL already during the
initialization of the EFI subsystem. We must make sure efi_save_gd() has
already been called at that moment.

Anyway it is better to have this call in one location instead of three.

This fixes an illegal memory access occurring since 4e6b5d6503
("efi_loader: create root node") with DEBUG = 1.

Fixes: 4e6b5d6503 ("efi_loader: create root node")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16 15:53:15 +02:00
Heinrich Schuchardt
c982874e93 efi_loader: refactor efi_setup_loaded_image()
Create the handle of loaded images and the EFI_LOADED_IMAGE_PROTOCOL
inside efi_setup_loaded_image(). Do not use local variables.

Currently we expect the loaded image handle to point to the loaded image
protocol. Additionally we have appended private fields to the protocol.

With the patch the handle points to a loaded image object and the private
fields are added here. This matches how we handle the net and the gop
object.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:31 +02:00
Alexander Graf
24638a1f21 efi_loader: Fix loaded_image handle passing from EL3
When running in EL3 mode on AArch64, we have to first drop to EL2
to execute a UEFI payload. When dropping down, the arguments to
the entry point have to stay identical to the ones for normal entry
though.

In commit ea54ad5928 ("efi_loader: pass handle of loaded image")
we incorrectly changed that logic and had the el3 entry path diverge.
Fix it up by syncing it back to what it's supposed to be.

Fixes: ea54ad5928 ("efi_loader: pass handle of loaded image")
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2018-09-23 21:55:31 +02:00
Heinrich Schuchardt
4e6b5d6503 efi_loader: create root node
Currently we assign a lot of protocols to loaded images though
these protocols are not related to them. Instead they should be
installed on a separate handle. Via the device path it is the
parent to the devices like the network adapter.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:31 +02:00
Heinrich Schuchardt
79276eb243 efi_loader: memory leak in efi_set_bootdev()
efi_set_bootdev() may be called repeatedly.
Free the memory allocated for device paths in previous calls.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
Heinrich Schuchardt
8887acc685 efi_loader: do not use local variable for handle
Do not use a local variable for the handle backing the memory device path.
Adjust relate comments.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
Heinrich Schuchardt
7086a71aa8 efi_loader: buffer size for load options
The number of bytes in an utf-8 string is an upper limit for the number of
words in the equivalent utf-16 string. In so far the inumbant coding works
correctly. For non-ASCII characters the utf-16 string is shorter. With the
patch only the necessary buffer size is allocated for the load options.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Simon Glass
9dff490089 efi: sandbox: Tidy up copy_fdt() to work with sandbox
At present this function takes a pointer as its argument, then passes this
to efi_allocate_pages(), which actually takes an address. It uses casts,
which are not supported on sandbox.

Also the function calculates the FDT size rounded up to the neared EFI
page size, then its caller recalculates the size and adds a bit more to
it.

This function is much better written as something that works with
addresses only, and returns both the address and the size of the relocated
FDT.

Also, copy_fdt() returns NULL on error, but really should propagate the
error from efi_allocate_pages(). To do this it needs to return an
efi_status_t, not a void *.

Update the code in this way, so that it is easier to follow, and also
supports sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:28 +02:00
Simon Glass
baf70c0210 efi: Relocate FDT to 127MB instead of 128MB
Sandbox only has 128MB of memory so we cannot relocate the device tree up
to start at 128MB. Use 127MB instead, which should be safe.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:28 +02:00
Heinrich Schuchardt
197005ae2a efi_loader: remove unused efi_get_time_init()
Remove unused function efi_get_time_init().

Initialization of the RTC has to be done in board bring up not in the EFI
subsystem.

There is no RTC device in the UEFI spec. The RTC is only accessed through
the runtime services.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 15:00:24 +02:00
Heinrich Schuchardt
640adadf81 efi_loader: calculate crc32 for EFI tables
For the boot and runtime services tables and for the system table the
crc32 has to be set in the header.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 15:00:24 +02:00
Simon Glass
416e07e2cf efi: Drop error return in efi_carve_out_dt_rsv()
This function currently returns an error code, but never uses it. There is
no function comment so it is not obvious why. Presuambly the error is not
important.

Update the function to explain its purpose and why it ignores the error.
Drop the useful error return value.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:57:44 +02:00
Simon Glass
bc9a638a10 efi: Tidy up device-tree-size calculation in copy_fdt()
This is a bit confusing at present since it adds 4KB to the pointer, then
rounds it up. It looks like a bug, but is not.

Move the 4KB addition into a separate statement and expand the comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:57:44 +02:00
Alexander Graf
354264b31d efi_loader: Use map_sysmem() in bootefi command
The bootefi command gets a few addresses as values passed in. In sandbox,
these values are in U-Boot address space, so we need to make sure we
explicitly call map_sysmem() on them to be able to access them.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:57:43 +02:00
Mark Kettenis
f17f2001eb efi_loader: ARM: don't attempt to enter non-secure mode twice
Multiple EFI binaries may be executed in sequence.  So if we already
are in non-secure mode after running the first one we should skip
the switching code since it no longer works once we're non-secure.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:57:43 +02:00
Mark Kettenis
dc500c3694 efi_loader: ARM: run EFI payloads non-secure
If desired (and possible) switch into HYP mode or non-secure SVC mode
before calling the entry point of an EFI application.  This allows
U-Boot to provide a usable PSCI implementation and makes it possible
to boot kernels into hypervisor mode using an EFI bootloader.

Based on diffs from Heinrich Schuchardt and Alexander Graf.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
[agraf: Fix indentation]
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 14:57:43 +02:00
Bin Meng
86df34d42b efi_loader: Install ACPI configuration tables
ACPI tables can be passed via EFI configuration table to an EFI
application. This is only supported on x86 so far.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-02 09:23:28 +08:00
Alexander Graf
58bc69d20a efi_loader: Allocate memory handle for mem dp
When we boot using memdp (bootefi on an address without previous
load that populates the device path) then the memory device path
we pass in is not backed by any handle.

That can result in weird effects. For example grub gets very grumpy
about this inside the efi_net module and just loops endlessly.

So let's expose a simple handle that the memory device path is backed
on. That way any code that looks for the device the dp is on, finds
one.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-14 10:53:37 +02:00
Heinrich Schuchardt
e09159c867 efi_loader: avoid anonymous constants for AllocatePages
Do not use anonymous constants when calling efi_allocage_pages.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Heinrich Schuchardt
c3b11dea7c efi_loader: allow unaligned memory access
The UEFI spec mandates that unaligned memory access should be enabled if
supported by the CPU architecture.

This patch adds an empty weak function unaligned_access() that can be
overridden by an architecture specific routine.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Heinrich Schuchardt
e37aa7ada3 efi_selftest: do not call efi_init_obj_list() twice
Remove a superfluous call to efi_init_obj_list() invoked by
'bootefi selftest'.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:20 +02:00
Tom Rini
f739fcd831 SPDX: Convert a few files that were missed before
As part of the main conversion a few files were missed.  These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict.  This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.

Fixes: 83d290c56f ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-10 20:38:35 -04:00
Joe Hershberger
092f2f35b5 Revert "Kconfig: cmd: Make networking command dependent on NET"
This reverts the parts of commit 3b3ea2c56e
where it changed the EFI dependency on NET.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:48:34 -05:00
Alexander Graf
806d2fa8e3 efi_loader: Respect DT reserved regions
With legacy boot (booti, bootz), people can declare memory regions as
reserved using device tree memory reservations. This feature is some
times used to indicate memory regions that should not be touched.

Since in a UEFI world, the DT memory reservations do not get honored,
let's copy them into the UEFI memory map so everyone has a coherent
view of the world and we give people the chance to add reservations
on demand.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-06 09:40:53 +02:00
Heinrich Schuchardt
2db1eba1c3 efi_loader: correctly determine the boot partition
The device path of the loaded image should be set to the partition
from which the image was loaded. This requires using the same logic as
the load command.

Without the patch the device path pointed to the whole disk after executing

	load mmc 0: 0x43000000 FILE

and not to the boot partition from which the file was actually loaded.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 13:14:33 +02:00
Heinrich Schuchardt
bc4f9133ed efi_loader: support device tree for bootefi selftest
The second argument of the bootefi command should always be usable to
specify a device tree. This was missing for bootefi selftest and
bootefi hello.

Proper error handling is added.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Heinrich Schuchardt
fc225e6082 efi_loader: check initialization of EFI subsystem is successful
Up to now errors in the initialization of the EFI subsystems was not
checked.

If any initialization fails, leave the bootefi command.

We do not retry initialization because this would require to undo all prior
initalization steps.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Heinrich Schuchardt
45204b1025 efi_loader: do_bootefi_exec should always return an EFI status code
The return type of do_bootefi_exec() is efi_status_t. So in case
of an error we should always return an EFI status code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Heinrich Schuchardt
098a6cdd1c efi_loader: simplify calling efi_init_obj_list
efi_init_obj_list() should be executed only once.

Rather than having the caller check this variable and the callee set it,
move all access to the variable inside the function. This reduces the
logic needed to call efi_init_obj_list().

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Michal Simek
3b3ea2c56e Kconfig: cmd: Make networking command dependent on NET
Enable networking command only when NET is enabled.
And remove selecting NET for CMD_NET

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-27 16:25:30 -05:00
Heinrich Schuchardt
f623e07f0c efi_loader: fix the online help for bootefi bootmgr
The bootefi command is missing in the online help for
bootefi bootmgr.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10 00:24:00 +01:00
Heinrich Schuchardt
49db1cb8c3 efi_loader: catch misspelled bootefi subcommand
If 'bootefi hello' or 'bootefi selftest' can be executed depends on the
configuration.

If an invalid non-numeric 1st argument is passed to bootefi, e.g.
'bootefi hola', this string is converted to 0 and U-Boot jumps to
this typically invalid address.

With the patch the online help is shown instead.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 21:37:13 +01:00
Alexander Graf
c6fa5df6aa efi_loader: Always use EFIAPI instead of asmlinkage
EFI calls are usually defined as asmlinkage. That means we pass all parameters
to functions via the stack x86_32.

On x86_64 however, we need to also stick to the MS ABI calling conventions,
which the EFIAPI define conveniently handles for us. Most EFI functions were
also marked with EFIAPI, except for the entry call.

So this patch adjusts all entry calls to use EFIAPI instead of the manual
asmlinkage attribute.

While at it, we also change the prototype of the entry point to return
efi_status_t instead of ulong, as this is the correct prototype definition.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v1 -> v2:

  - Use efi_status_t in all occurences
2018-01-28 21:37:13 +01:00
Heinrich Schuchardt
05ef48a248 efi_driver: EFI block driver
This patch provides
* a uclass for EFI drivers
* a EFI driver for block devices

For each EFI driver the uclass
* creates a handle
* adds the driver binding protocol

The uclass provides the bind, start, and stop entry points for the driver
binding protocol.

In bind() and stop() it checks if the controller implements the protocol
supported by the EFI driver. In the start() function it calls the bind()
function of the EFI driver. In the stop() function it destroys the child
controllers.

The EFI block driver binds to controllers implementing the block io
protocol.

When the bind function of the EFI block driver is called it creates a
new U-Boot block device. It installs child handles for all partitions and
installs the simple file protocol on these.

The read and write functions of the EFI block driver delegate calls to the
controller that it is bound to.

A usage example is as following:

U-Boot loads the iPXE snp.efi executable. iPXE connects an iSCSI drive and
exposes a handle with the block IO protocol. It calls ConnectController.

Now the EFI block driver installs the partitions with the simple file
protocol.

iPXE uses the simple file protocol to load Grub or the Linux Kernel.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: add comment on calloc len]
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:14 +01:00
Heinrich Schuchardt
17ff6f02f5 efi_loader: store DT in EFI_RUNTIME_SERVICES_DATA memory
The device tree is needed at runtime. So we have to store it in
EFI_RUNTIME_SERVICES_DATA memory.

The UEFI spec recommends to store all configuration tables in
EFI_RUNTIME_SERVICES_DATA memory.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:14 +01:00
Heinrich Schuchardt
2074f70064 efi_loader: consistently use efi_handle_t for handles
We should consistently use the efi_handle_t typedef when
referring to handles.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:13 +01:00