Commit Graph

23 Commits

Author SHA1 Message Date
Bin Meng
5b2a20e956 nvme: Fix warning of cast from pointer to integer of different size
When dma_addr_t is u32 in 64-bit, there are some warnings when
building NVME driver. Fix it by doing an additional (long) cast.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-19 16:17:33 +08:00
Bin Meng
d0851c8937 blk: Call part_init() in the post_probe() method
part_init() is currently called in every DM BLK driver, either
in its bind() or probe() method. However we can use the BLK
uclass driver's post_probe() method to do it automatically.

Update all DM BLK drivers to adopt this change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Adam Ford
1811a928c6 Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE
based on a list of enabled options.  Moving HAVE_BLOCK_DEVICE to
Kconfig allows us to drastically shrink the logic in
config_fallbacks.h

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08 19:09:03 -05:00
Bin Meng
9e18eae276 nvme: Remove dead codes in nvme_setup_io_queues()
Execution cannot reach this statement: "nr_io_queues = result;"

Reported-by: Coverity (CID: 166731)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-03 15:30:34 -04:00
Bin Meng
52a5690efb nvme: Fix potential sign extension issue in nvme_blk_rw()
"lbas" with type "u16" (16 bits, unsigned) is promoted in
"lbas << ns->lba_shift" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long long" (64 bits, unsigned).
If "lbas << ns->lba_shift" is greater than 0x7FFFFFFF, the upper
bits of the result will all be 1.

Fix it by casting "lbas" to "u32".

Reported-by: Coverity (CID: 166730)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-03 15:30:33 -04:00
Bin Meng
37d46870b3 nvme: Fix wrong ndev->queues memset
memset() was given a sizeof(NVME_Q_NUM * sizeof(struct nvme_queue *)
to clear, which is wrong.

Reported-by: Coverity (CID: 166729)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-03 15:30:32 -04:00
Bin Meng
18aa5a4134 nvme: Get rid of the global variable nvme_info
At present the NVMe uclass driver uses a global variable nvme_info
to store global information like namespace id, and NVMe controller
driver's priv struct has a blk_dev_start that is used to calculate
the namespace id based on the global information from nvme_info.

This is not a good design in the DM world and can be replaced with
the following changes:

- Encode the namespace id in the NVMe block device name during
  the NVMe uclass post probe
- Extract the namespace id from the device name during the NVMe
  block device probe
- Let BLK uclass calculate the devnum for us by passing -1 to
  blk_create_devicef() as the devnum

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:14 -04:00
Bin Meng
d5b7ee9c6e nvme: Use blk_create_devicef() API
The codes in nvme_uclass_post_probe() can be replaced to call the
blk_create_devicef() API directly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:14 -04:00
Bin Meng
704e040a51 nvme: Apply cache operations on the DMA buffers
So far cache operations are only applied on the submission queue and
completion queue, but they are missing in other places like identify
and block read/write routines.

In order to correctly operate on the caches, the DMA buffer passed
to identify routine must be allocated properly on the stack with the
existing macro ALLOC_CACHE_ALIGN_BUFFER().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:13 -04:00
Bin Meng
625a483cea nvme: Consolidate block read and write routines
The NVMe block read and write routines are almost the same except
the command opcode. Let's consolidate them to avoid duplication.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:13 -04:00
Bin Meng
722e668db2 nvme: Use macros to access NVMe queues
NVMe driver only uses two queues. The first one is allocated to do
admin stuff, while the second one is for IO stuff. So far the driver
uses magic number (0/1) to access them. Change to use macros.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:12 -04:00
Bin Meng
04d2a38401 nvme: Respect timeout when en/disabling the controller
So far the driver unconditionally delays 10ms when en/disabling the
controller and still return 0 if 10ms times out. In fact, spec defines
a timeout value in the CAP register that is the worst case time that
host software shall wait for the controller to become ready.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:12 -04:00
Bin Meng
b65c692143 nvme: Cache controller's capabilities
Capabilities register is RO and accessed at various places in the
driver. Let's cache it in the controller driver's priv struct.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:11 -04:00
Bin Meng
3e18562961 nvme: Fix endianness assignment to prp2 in nvme_identify()
So far this is not causing any issue due to NVMe and x86 are using
the same endianness, but for correctness, it should be fixed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:11 -04:00
Bin Meng
099c2015b0 nvme: Fix ndev->queues allocation
ndev->queues is a pointer to pointer, but the allocation wrongly
requests sizeof(struct nvme_queue). Fix it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:11 -04:00
Bin Meng
e5dc2d2665 nvme: Fix getting PCI vendor id of the NVMe block device
The codes currently try to read PCI vendor id of the NVMe block
device by dm_pci_read_config16() with its parameter set as its
root complex controller (ndev->pdev) instead of itself. This is
seriously wrong. We can read the vendor id by passing the correct
udevice parameter to the dm_pci_read_config16() API, however there
is a shortcut by reading the cached vendor id from the PCI device's
struct pci_child_platdata.

While we are here fixing this bug, apparently the quirk stuff handle
codes in nvme_get_info_from_identify() never takes effect since its
logic has never been true at all. Remove these codes completely.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:10 -04:00
Bin Meng
abe25db611 nvme: Remove useless defines
These are leftover when the driver was ported from Linux and are not
used by the U-Boot driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:10 -04:00
Bin Meng
beb5f52139 nvme: Handle zero Maximum Data Transfer Size (MDTS)
Maximum Data Transfer Size (MDTS) field indicates the maximum
data transfer size between the host and the controller. The
host should not submit a command that exceeds this transfer
size. The value is in units of the minimum memory page size
and is reported as a power of two (2^n).

The spec also says: a value of 0h indicates no restrictions
on transfer size. On the real NVMe card this is normally not
0 due to hardware restrictions, but with QEMU emulated NVMe
device it reports as 0. In nvme_blk_read/write() below we
have the following algorithm for maximum number of logic
blocks per transfer:

u16 lbas = 1 << (dev->max_transfer_shift - ns->lba_shift);

dev->max_transfer_shift being 0 will for sure cause lbas to
overflow. Let's use 20. With this fix, the NVMe driver works
on QEMU emulated NVMe device.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:33 -04:00
Jon Nettleton
f81d83d534 nvme: Fix number of blocks detection
NVMe should use the nsze value from the queried device. This will
reflect the total number of blocks of the device and fix detecting
my Samsung 960 EVO 256GB.

Original:
Capacity: 40386.6 MB = 39.4 GB (82711872 x 512)

Fixed:
Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)

Signed-off-by: Jon Nettleton <jon@solid-run.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:32 -04:00
Jon Nettleton
0deb91318b nvme: Detect devices that are class Storage Express
This adds support to detect the catchall PCI class for NVMe devices.
It allows the drivers to work with most NVMe devices that don't need
specific detection due to quirks etc.

Tested against a Samsung 960 EVO drive.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:32 -04:00
Zhikang Zhang
f6aa61d599 nvme: Add show routine to print detailed information
This adds nvme_print_info() to show detailed NVMe controller and
namespace information.

Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:31 -04:00
Zhikang Zhang
982388eaa9 nvme: Add NVM Express driver support
NVM Express (NVMe) is a register level interface that allows host
software to communicate with a non-volatile memory subsystem. This
interface is optimized for enterprise and client solid state drives,
typically attached to the PCI express interface.

This adds a U-Boot driver support of devices that follow the NVMe
standard [1] and supports basic read/write operations.

Tested with a 400GB Intel SSD 750 series NVMe card with controller
id 8086:0953.

[1] http://www.nvmexpress.org/resources/specifications/

Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:31 -04:00