Commit Graph

121 Commits

Author SHA1 Message Date
Purna Chandra Mandal
9ffa7a35ef drivers: ddr: Add DDR2 SDRAM controller driver for Microchip PIC32.
This driver initializes PIC32 DDR2 SDRAM controller and internal DDR2 Phy module.
DDR2 controller operates in half-rate mode (upto 533MHZ frequency).

Signed-off-by: Paul Thacker <paul.thacker@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-01 22:14:01 +01:00
Simon Glass
ca831f4933 dm: Expand the uclass for Platform Controller Hubs (PCH)
A Platform Controller Hub is an Intel concept - it is like the peripherals
on an SoC and is often in a separate chip from the CPU. The chip is typically
found on the first PCI bus and integrates multiple devices.

We have a very simple uclass to support PCHs. Add a few operations, such as
setting up the devices on the PCH and finding the SPI controller base
address. Also move it into drivers/pch/ since we will be adding a few PCH
drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:17 +08:00
Stefan Roese
81e33f4b65 arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig
Until now, the SoC selection for the ARCH_MVEBU platforms has been done
in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As
it needed to get selected for AXP and A38x based boards. This patch
now changes this to move the SoC selection to Kconfig. And also
uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x.
This makes things a bit clearer - especially for new board additions.

Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and
CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available
CONFIG_ARMADA_38X and CONFIG_ARMADA_XP.

And CONFIG_DDR3 is removed, as its not referenced anywhere.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Przemyslaw Marczak
5decbf5300 dm: adc: add simple ADC uclass implementation
This commit adds:
- new uclass id: UCLASS_ADC
- new uclass driver: drivers/adc/adc-uclass.c

The new uclass's API allows for ADC operation on:
* single-channel with channel selection by a number
* multti-channel with channel selection by bit mask

ADC uclass's functions:
* single-channel:
  - adc_start_channel()        - start channel conversion
  - adc_channel_data()         - get conversion data
  - adc_channel_single_shot()  - start/get conversion data
* multi-channel:
  - adc_start_channels()       - start selected channels conversion
  - adc_channels_data()        - get conversion data
  - adc_channels_single_shot() - start/get conversion data for channels
                                 selected by bit mask
* general:
  - adc_stop()      - stop the conversion
  - adc_vdd_value() - positive reference Voltage value with polarity [uV]
  - adc_vss_value() - negative reference Voltage value with polarity [uV]
  - adc_data_mask() - conversion data bit mask

The device tree can provide below constraints/properties:
- vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1)
- vss-polarity-negative: if true: Vss = vss-microvolts * (-1)
- vdd-supply:            phandle to Vdd regulator's node
- vss-supply:            phandle to Vss regulator's node
And optional, checked only if the above corresponding, doesn't exist:
  - vdd-microvolts:      positive reference Voltage [uV]
  - vss-microvolts:      negative reference Voltage [uV]

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00
Thomas Chou
c8a7ba9e6a dm: implement a Timer uclass
Implement a Timer uclass to work with lib/time.c.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:37:03 +08:00
Nishanth Menon
ddf56bc7e3 drivers: Introduce a simplified remoteproc framework
Many System on Chip(SoC) solutions are complex with multiple processors
on the same die dedicated to either general purpose of specialized
functions. Many examples do exist in today's SoCs from various vendors.
Typical examples are micro controllers such as an ARM M3/M0 doing a
offload of specific function such as event integration or power
management or controlling camera etc.

Traditionally, the responsibility of loading up such a processor with a
firmware and communication has been with a High Level Operating
System(HLOS) such as Linux. However, there exists classes of products
where Linux would need to expect services from such a processor or the
delay of Linux and operating system being able to load up such a
firmware is unacceptable.

To address these needs, we need some minimal capability to load such a
system and ensure it is started prior to an Operating System(Linux or
any other) is started up.

NOTE: This is NOT meant to be a solve-all solution, instead, it tries to
address certain class of SoCs and products that need such a solution.

A very simple model is introduced here as part of the initial support
that supports microcontrollers with internal memory (no MMU, no
execution from external memory, or specific image format needs). This
basic framework can then (hopefully) be extensible to other complex SoC
processor support as need be.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:38 -04:00
Masahiro Yamada
d90a5a30de pinctrl: add pin control uclass support
This creates a new framework for handling of pin control devices,
i.e. devices that control different aspects of package pins.

This uclass handles pinmuxing and pin configuration; pinmuxing
controls switching among silicon blocks that share certain physical
pins, pin configuration handles electronic properties such as pin-
biasing, load capacitance etc.

This framework can support the same device tree bindings, but if you
do not need full interface support, you can disable some features to
reduce memory foot print.  Typically around 1.5KB is necessary to
include full-featured uclass support on ARM board (CONFIG_PINCTRL +
CONFIG_PINCTRL_FULL + CONFIG_PINCTRL_GENERIC + CONFIG_PINCTRL_PINMUX),
for example.

We are often limited on code size for SPL.  Besides, we still have
many boards that do not support device tree configuration.  The full
pinctrl, which requires OF_CONTROL, does not make sense for those
boards.  So, this framework also has a Do-It-Yourself (let's say
simple pinctrl) interface.  With CONFIG_PINCTRL_FULL disabled, the
uclass itself provides no systematic mechanism for identifying the
peripheral device, applying pinctrl settings, etc.  They must be
done in each low-level driver.  In return, you can save much memory
footprint and it might be useful especially for SPL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-31 07:57:29 -06:00
Masahiro Yamada
e00e8b3989 led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:03 -04:00
Masahiro Yamada
f0cd245448 led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:03 -04:00
Masahiro Yamada
26d5fa805d ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:02 -04:00
Masahiro Yamada
40c9abbd6b ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:02 -04:00
Masahiro Yamada
5525958346 clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:02 -04:00
Masahiro Yamada
0543589118 clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:01 -04:00
Masahiro Yamada
040906f68d dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:01 -04:00
Masahiro Yamada
d6c2ac5b75 spl: move SPL driver entries to driver/Makefile
Just preparing for upcoming cleaning.

The board-specific linker script  board/vpac270/u-boot-spl.lds
has been touched to avoid build error.  It does not change the
size of spl/u-boot-spl.bin for this board, so it should be OK.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:00 -04:00
Simon Glass
f26c8a8e77 dm: Add a clock uclass
Clocks are an important feature of platforms and have become increasing
complex with time. Most modern SoCs have multiple PLLs and dozens of clock
dividers which distribute clocks to on-chip peripherals.

Some SoC implementations have a clock API which is private to that SoC family,
e.g. Tegra and Exynos. This is useful but it would be better to have a
common API that can be understood and used throughout U-Boot.

Add a simple clock API as a starting point. It supports querying and setting
the rate of a clock. Each clock is a device. To reduce memory and processing
overhead the concept of peripheral clocks is provided. These do not need to
be explicit devices - it is possible to write a driver that can adjust the
I2C clock (for example) without an explicit I2C clock device. This can
dramatically reduce the number of devices (and associated overhead) in a
complex SoC.

Clocks are referenced by a number, and it is expected that SoCs will define
that numbering themselves via an enum.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:29 -06:00
Simon Glass
6c51df6859 dm: Add support for RAM drivers
Add support for a driver which sets up DRAM and can return information about
the amount of RAM available. This is a first step towards moving RAM init
to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:27 -06:00
Simon Glass
5917112c9e dm: Add support for LEDs
Add a simple uclass for LEDs, so that these can be controlled by the device
tree and activated when needed. LEDs are referred to by their label.

This implementation requires a driver for each type of LED (e.g GPIO, I2C).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:24 -06:00
Simon Glass
11f4dc1583 dm: Implement a CPU uclass
It is useful to be able to keep track of the available CPUs in a multi-CPU
system. This uclass is mostly intended for use with SMP systems.

The uclass provides methods for getting basic information about each CPU.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-29 21:02:33 -06:00
Tom Rini
85bafb6da4 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2014-11-26 11:23:26 -05:00
Ye.Li
e3568d2eca DM: thermal: Add imx thermal DM driver
Add a new thermal uclass for thermal sensor and implement the imx
thermal driver basing on this uclass.

Signed-off-by: Ye.Li <B37916@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-11-21 15:30:01 +01:00
Zhao Qiang
93d3320417 qe: add u-qe support to arm board
ls1021 is arm-core and support qe which is u-qe.
add u-qe init for arm board.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
[York Sun: Fix compiling error caused by u_qe_init()]
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-19 12:55:45 -08:00
Khoronzhuk, Ivan
a43febde44 soc: keystone_serdes: create a separate SGMII SerDes driver
This patch split the Keystone II SGMII SerDes related code from
Ethernet driver and create a separate SGMII SerDes driver.
The SerDes driver can be used by others keystone subsystems
like PCI, sRIO, so move it to driver/soc/keystone directory.

Add soc specific drivers directory like in the Linux kernel.
It is going to be used by keysotone soc specific drivers.

Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-10-23 11:27:28 -04:00
Masahiro Yamada
f494e0a184 kbuild: refactor some makefiles
[1] Move driver/core/, driver/input/ and drivers/input/ entries
    from the top Makefile to drivers/Makefile

[2] Remove the conditional by CONFIG_DM in drivers/core/Makefile
    because the whole drivers/core directory is already selected
    by CONFIG_DM in the upper level

[3] Likewise for CONFIG_DM_DEMO in drivers/demo/Makefile

[4] Simplify common/Makefile - both CONFIG_DDR_SPD and
    CONFIG_SPD_EEPROM are boolean macros so they can directly
    select objects

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Marek Vasut <marex@denx.de>
2014-09-24 18:30:29 -04:00
Heiko Schocher
b2f97cf279 pwm, imx6: add support for pwm modul on imx6
add basic support for the pwm modul found on imx6.
Pieces of this code are based on linux code from drivers/pwm/pwm-imx.c
Commit "cd3de83f1476 Linux 3.16-rc4"

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2014-07-23 12:25:42 +02:00
Khoronzhuk, Ivan
909ea9aa26 ARM: keystone: aemif: move aemif driver to drivers/memory/ti-aemif.c
Move AEMIF driver to drivers/memory/ti-aemif.c along with AEMIF
definitions collected in arch/arm/include/asm/ti-common/ti-aemif.h

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-06-19 17:53:58 -04:00
Masahiro Yamada
4c76b55231 drivers/qe: move the entry to drivers/Makefile
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-17 14:11:31 -05:00
Masahiro Yamada
7b6af41ef3 drivers: descend into sub directories only when it is necessary
- Descend into drivers/fpga/ only when CONFIG_FPGA=y
  - Descend into drivers/bios_emulator only when CONFIG_BIOSEMU=y

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-17 14:11:30 -05:00
Masahiro Yamada
9c3f0bc5ee drivers: move some drivers to drivers/Makefile
This commit moves some drivers subdirectory entry
from the toplevel Makefile to drivers/Makefile
using Kbuild descending feature.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:44 -04:00
Jean-Christophe PLAGNIOL-VILLARD
59829cc189 drivers/mtd : move mtd drivers to drivers/mtd
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:52 +01:00
Jean-Christophe PLAGNIOL-VILLARD
318c0b9043 drivers/misc : move misc drivers to drivers/misc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:51 +01:00
Jean-Christophe PLAGNIOL-VILLARD
33daf5b785 drivers/block : move block drivers to drivers/block
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:51 +01:00
Jean-Christophe PLAGNIOL-VILLARD
f868cc5a50 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:50 +01:00
Jean-Christophe PLAGNIOL-VILLARD
16b195c82a drivers/input : move input drivers to drivers/input
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:49 +01:00
Jean-Christophe PLAGNIOL-VILLARD
e455866629 drivers/usb : move usb drivers to drivers/usb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:27:38 +01:00
Jean-Christophe PLAGNIOL-VILLARD
1378df792a drivers/serial : move serial drivers to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:24:16 +01:00
Jean-Christophe PLAGNIOL-VILLARD
2439e4bfa1 drivers/net : move net drivers to drivers/net
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 18:35:17 +01:00
Jean-Christophe PLAGNIOL-VILLARD
352d259130 drivers/video : move video drivers to drivers/video
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 18:35:11 +01:00
Jean-Christophe PLAGNIOL-VILLARD
7364621718 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24 20:35:56 +01:00
Jean-Christophe PLAGNIOL-VILLARD
93a686ee9c drivers/pci : move pci drivers to drivers/pci
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24 20:35:55 +01:00
Jean-Christophe PLAGNIOL-VILLARD
080c646dbf drivers/i2c : move i2c drivers to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-20 20:14:18 +01:00
Grant Likely
efe33035ac Merge branch 'origin' into kconfig-for-1.3.1
Conflicts:

	drivers/Makefile
2007-11-16 21:01:19 -07:00
Grant Likely
4d4faae65e Group PCI and PCMCIA drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:31:23 -07:00
Grant Likely
5798f87dc1 Group block/flash drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:22:48 -07:00
Grant Likely
df58c81551 Group USB drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:22:48 -07:00
Grant Likely
5dbb6ed622 Group i2c drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:22:37 -07:00
Grant Likely
ec00c76de0 Group console drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:21:54 -07:00
Grant Likely
754f230aa0 Group network drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:06:02 -07:00
Grant Likely
f0037c56b0 Build: split COBJS value into multiple lines
This change is in preparation for condtitionial compile support in the
build system.  By spliting them all into seperate lines now, subsequent
patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
be less invasive and easier to review

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:05:18 -07:00