Commit Graph

28 Commits

Author SHA1 Message Date
Patrick Delaunay
d7a435a2ce dm: led: move default state support in led uclass
This patch save common LED property "default-state" value
in post bind of LED uclass.
The configuration for this default state is only performed when
led_default_state() is called;
It can be called in your board_init()
or it could added in init_sequence_r[] in future.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-10 10:27:32 -04:00
Patrick Delaunay
1f6d81fe33 Revert "dm: led: auto probe() LEDs with "default-state""
This reverts commit bc882f5d5c.
because this patch adds the probe of LED driver during the
binding phasis. It is not allowed in driver model because
the drivers (clock, pincontrol) needed by the LED driver can
be also probed before the binding of all the device and
it is a source of problems.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-10 10:27:32 -04:00
Philippe Reynes
c38abed509 led: bcm6328: read base address in the parent node
In the device tree, the address for the led is located
in the parent node (for exemple leds), not in the led node
(for exemple led@0).

The commit "led: bcm6328: convert to use live dt"
(sha1: 8994551760)
change this behaviour and read the address in the led node.

We fix this by reading the base address for led
in the parent node.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-07-11 14:23:55 +02:00
Álvaro Fernández Rojas
8994551760 led: bcm6328: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-06-01 15:56:02 +02:00
Álvaro Fernández Rojas
a15c16f923 led: bcm6358: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-06-01 15:56:02 +02:00
Patrick Bruenn
bc882f5d5c dm: led: auto probe() LEDs with "default-state"
To avoid board specificy LED activation code, automatically
activate gpio-leds with "default-state" property during bind().

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2018-05-08 09:07:33 -04:00
Patrick Bruenn
d90f0d4cae dm: led: Support "default-state" property
Add support for the device tree property "default-state". This feature
might be useful for LEDs indicating "power on" or similar states.

Note: Even with this commit gpio-leds remain in reset state. That's
because the led_gpio is not probed until DM_FLAG_ACTIVATED is set.

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2018-05-08 09:07:33 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Simon Glass
45a26867e8 dm: core: Update device_bind_driver_to_node() to use ofnode
Adjust this function to us an ofnode instead of an offset, so it can be
used with livetree. This involves updating all callers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:08 -06:00
Simon Glass
a821c4af79 dm: Rename dev_addr..() functions
These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

   1. dev_read_addr...()    - works on devices, supports flat/live tree
   2. devfdt_get_addr...()  - current functions, flat tree only
   3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:01 -06:00
Álvaro Fernández Rojas
632889cfe5 dm: led: add BCM6358 led driver
This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
28300dc526 dm: led: add BCM6328 led driver
This driver is a simplified version of linux/drivers/leds/leds-bcm6328.c,
simplified to remove HW leds and blink fallbacks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Simon Glass
53378dac8d dm: led: Add support for blinking LEDs
Allow LEDs to be blinked if the driver supports it. Enable this for
sandbox so that the tests run.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
9413ad4f0d dm: led: Support toggling LEDs
Add support for toggling an LED into the uclass interface. This can be
efficiently implemented by the driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
8f4b612333 dm: led: Add support for getting the state of an LED
It is useful to be able to read the LED as well as write it. Add this to
the uclass and update the GPIO driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
ddae9fcddc dm: led: Adjust the LED uclass
At present this is very simple, supporting only on and off. We want to
also support toggling and blinking. As a first step, change the name of
the main method and use an enum to indicate the state.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
56e19871dc dm: led: Rename struct led_uclass_plat
These structures are normally named with 'uc' instead of 'uclass'. Change
this one for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
9b36f74816 dm: led: Add a missing blank line in the Kconfig file
There should be a blank line between each option. Add one before LED_GPIO.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
e160f7d430 dm: core: Replace of_offset with accessor
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:14 -07:00
Uri Mashiach
79267edd10 status_led: Kconfig migration - introduction
Move all of the status LED feature to drivers/led/Kconfig.
doc/README.LED updated to reflect the Kconfig implementation.

Tested boards: CL-SOM-AM57x, CM-T335

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-01-21 15:12:33 -05:00
Simon Glass
6a436c9182 dm: led: Tidy up SPL options for the led and led-gpio
At present SPL does not have its own option. But these features can
increase SPL code size. Adjust the Kconfig and Makefile so that
separate a SPL option can be selected.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:22 -06:00
Masahiro Yamada
f0cd245448 led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:03 -04:00
Masahiro Yamada
0b11dbf705 drivers: hierarchize drivers Kconfig menu
The menuconfig for drivers are getting more and more cluttered
and unreadable because too many entries are displayed in a single
flat menu.  Use hierarchic menu for each category.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Update to apply again in a few places, drop USB hunk]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-12 20:47:44 -04:00
Simon Glass
3c43fba3d2 dm: test: Add a test for the LED uclass
Add a test to confirm that we can adjust LEDs using the led_gpio driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
fb8a5ffc77 led: Return -ENODEV if the LED device cannot be found
We normally use -ENODEV for a missing device, rather than -ENOENT. The
latter is reserved for when we have a device but cannot find something
within it.

Also avoid looking at the root LED device since it is only a container.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
5ac76bad22 dm: led: Add a driver for GPIO-controlled LEDs
Add a simple driver which allows use of LEDs attached to GPIOs. The linux
device tree binding is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:24 -06:00
Simon Glass
5917112c9e dm: Add support for LEDs
Add a simple uclass for LEDs, so that these can be controlled by the device
tree and activated when needed. LEDs are referred to by their label.

This implementation requires a driver for each type of LED (e.g GPIO, I2C).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:24 -06:00