Commit Graph

56 Commits

Author SHA1 Message Date
Sudhakar Rajashekhara
89b765c7f6 TI: DaVinci: Add board specific code for da850 EVM
Provides initial support for TI OMAP-L138/DA850 SoC devices on
a Logic PD EVM board.

Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-10 12:04:42 -04:00
Sudhakar Rajashekhara
158557001a TI: DaVinci: Prepare for da850 support
DA850/OMAP-L138 is a new SoC from Texas Instruments
(http://focus.ti.com/docs/prod/folders/print/omap-l138.html).
This SoC is similar to DA830/OMAP-L137 in many aspects. Hence
rename the da830 specific files and folders to da8xx to
accommodate DA850/OMAP-L138.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-10 12:04:37 -04:00
Sudhakar Rajashekhara
9d79956029 da830: Move common code out of da830evm.c file
TI's DA850/OMAP-L138 platform is similar to DA830/OMAP-L137
in many aspects. So instead of repeating the same code in
multiple files, move the common code to a different file
and call those functions from the respective da830/da850
files.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Nick Thompson <nick.thompson@ge.com>
Acked-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-10 12:04:32 -04:00
Peter Tyser
84ad688473 arm: Move cpu/$CPU to arch/arm/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:24 +02:00
Cyril Chemparathy
cc41a59a74 TI: Davinci: NAND Driver Cleanup
Modified to use IO accessor routines consistently.  Eliminated volatile usage
to keep checkpatch.pl happy.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
2010-03-23 14:29:09 -05:00
Nick Thompson
37cffdad06 da830evm: Add support for TI EMAC
Adds support for ethernet networking on the da830evm platform.

This platform uses an SoC EMAC interface and a 3 port ethernet
switch as a PHY with an RMII interface. The PHY also has a i2c
interface for configuring the switch functions.

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-03-07 12:36:35 -06:00
Nick Thompson
3a4e43921d DA830 EVM: Enable NAND support on Spectrum Digital EVM
The EVM UI extender card has a NAND device. This change will enable
saveenv to work with NAND and Linux to be booted using:

	mtdparts default
	nboot kernel
	bootm

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-02-12 12:31:54 -06:00
Nick Thompson
63a47dfd07 da830evm: Use table driven pin mux configuration
Tidyup the pin muxer configuration using the Davinci table driven
pinmux configuration function and data tables.

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-02-12 12:31:53 -06:00
Wolfgang Denk
2ff6922280 Merge branch 'master' of git://git.denx.de/u-boot-arm 2010-01-12 23:47:03 +01:00
Ajay Kumar Gupta
82a821f89b DA830: Add pinmux for USB0_DRVVBUS
USB0_DRVVBUS pinmux configuration is required for USB functinality
in uboot.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
2010-01-09 10:25:06 +01:00
Nick Thompson
90110e0eab Davinci: Table driven pinmux configuration
Davinci: Table driven pinmux configuration

Add code to allow pinmux_config tables to be grouped and configured
as a single resource. This removes multiple calls to the pinmux
configuration code from board_init and allows pinmuxes to be
individually configured and added by data manipulation only.

All related #ifdefs can the be removed from board_init code and
since the compiler optimises away statics, #ifdefs can be reduced in
the data definitions as well.

Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2010-01-04 08:48:16 -06:00
Sandeep Paulraj
c1ee63cee8 TI DaVinci DM646x: Enable NAND on DM6467 EVM
This patch enables NAND on the DM6467 EVM

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-11-27 16:26:17 -06:00
Sekhar Nori
bdc9c6c7f7 TI DA8xx: Add new directory for da830evm board
Add new directory for da830evm board

Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum
Digital EVM board. See http://www.spectrumdigital.com/

Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).

Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-27 16:26:15 -06:00
Nick Thompson
ca8480d444 TI Davinci: add a pin multiplexer configuration API
Creates a method allowing pin settings to be logically grouped into data
structure arrays and provides an API to configure the pinmux settings to
enable the relevant pin functions.

Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-27 16:26:14 -06:00
Wolfgang Denk
4946775c6d Coding Style cleanup; update CHANGELOG, prepare -rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-10-28 00:49:47 +01:00
Sandeep Paulraj
a4474ff862 TI DaVinci: Adding Copyright for DM365 EVM
Forgot to add Copyright while submitting the patch.
This patch adds the copyright.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-24 09:55:24 -05:00
Sandeep Paulraj
fac1ef4ba6 TI DaVinci: DM355 Leopard: Fix compilation warning
We get a compliation warning when we enable the NAND driver
for DM355 leopard. The waring we get is that we have
an implicit declaration of davinci_nand_init.

It is fixed by including the asm/arch/nand_defs.h header file

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-24 09:55:24 -05:00
Sandeep Paulraj
5df65cf56a TI: DaVinci: DM355 Leopard board support
This patch adds support for the leopard board which is
based on the DM355 SOC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Sandeep Paulraj
6ab176d709 TI DaVinci DM646x: Adding initial support for DM6467 EVM
This patch adds the initial support for DM6467 EVM.
Other features like NET and NAND support will be added as follow up patches.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Sandeep Paulraj
d884f64a7b TI DaVinci DM365: Fix Compilation warning for DM365 EVM
This patch fixes a compilation warning while compiling
the DM365 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Sandeep Paulraj
6fe5e87be4 TI DaVinci DM355: Fix Compilation warning for DM355 EVM
This patch fixes a compilation warning while compiling
the DM355 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Sandeep Paulraj
4df30f3bb7 TI: DaVinci DM365: Enabling network Support on DM365 EVM
This patch enables EMAC on the DM365 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:37 -05:00
Sandeep Paulraj
5d783c1ffd TI DaVinci DM365: Removing header file which does not exist
The DaVinci DM365 EVM board specific code was including a header file
which does not exist. So removing this header file.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-13 06:17:35 -05:00
Sandeep Paulraj
2d4072c06b ARM: DaVinci: Adding Support for DaVinci DM365 EVM
This patch adds support for the DM365 EVM.
It has been tested on a DM365 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-09-05 13:48:43 +02:00
Sandeep Paulraj
b3af1d698b ARM: Davinci DM355: Enabling DM9000 on DM355 EVM
Due to recent changes to the NET support on U-boot, DM9000
is no longer detected on the DM355 EVM.
This minor update enables DM9000 on the DM355 EVM.
Tested on the DM355 EVM

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-08-10 14:53:53 -07:00
David Brownell
154b5484ac davinci_nand chipselect/init cleanup
Update chipselect handling in davinci_nand.c so that it can
handle 2 GByte chips the same way Linux does:  as one device,
even though it has two halves with independent chip selects.
For such chips the "nand info" command reports:

  Device 0: 2x nand0, sector size 128 KiB

Switch to use the default chipselect function unless the board
really needs its own.  The logic for the Sonata board moves out
of the driver into board-specific code.  (Which doesn't affect
current build breakage if its NAND support is enabled...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:03 -05:00
Ben Warren
8453587ef9 Switched davinci_emac Ethernet driver to use newer API
Added CONFIG_NET_MULTI to all Davinci boards
Removed all calls to Davinci network driver from board code
Added cpu_eth_init() to cpu/arm926ejs/cpu.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:54 -07:00
David Brownell
28b00324be dm355 evm support
Initial U-Boot support for the DaVinci DM355 EVM.  This is a board
from Spectrum Digital.  Board docs include schematic and firmware
for its microcontroller:

  http://c6000.spectrumdigital.com/evmdm355/revd/

Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:

  http://focus.ti.com/docs/prod/folders/print/tms320dm355.html

This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART).  In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:51 +02:00
Sandeep Paulraj
53925acf1b ARM DaVinci:Consolidate common u-boot.lds
The u-boot.lds is common for all DaVinci boards. The patch removes
multiple instances and moves the u-boot.lds to /cpu/arm926ejs/davinci
folder. This addresses one of the comments i received while submitting
patches for DM3xx

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-06-12 20:39:49 +02:00
David Brownell
7a4f511b59 davinci: display correct clock info
Move the clock-rate dumping code into the cpu/.../davinci area
where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
updating the format and showing the DSP clock (where relevant).

Switch boards to use the cpuinfo() hook for this stuff.

Remove a few now-obsolete PLL #defines.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b54384e3ba arm: timer and interrupt init rework
actually the timer init use the interrupt_init as init callback
which make the interrupt and timer implementation difficult to follow

so now rename it as int timer_init(void) and use interrupt_init for interrupt

btw also remane the corresponding file to the functionnality implemented

as ixp arch implement two timer - one based on interrupt - so all the timer
related code is moved to timer.c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
David Brownell
7b7808ae6d davinci: move psc support board-->cpu
Move DaVinci PSC support from board/* to cpu/* where it belongs.
The PSC module manages clocks and resets for all DaVinci-family
SoCs, and isn't at all board-specific.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:47 +02:00
David Brownell
641e0925e4 DaVinci Ethernet cleanup
Chips without the EMAC controller won't need the utilities
it uses to read an Ethernet address from EEPROM; so don't
include them needlessly.

Use is_valid_ether() to validate the address from EEPROM.
All-zero addresses aren't the only invalid addresses.
A fully erased EEPROM returns all-ones, also invalid...

Switch those Ethernet utilities to use "%pM" for printing
MAC addresses; and not say ROM when they mean EEPROM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-12 20:39:47 +02:00
Detlev Zundel
792a09eb9d Fix e-mail address of Gary Jennejohn.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-05-15 22:11:59 +02:00
Trent Piepho
f62fb99941 Fix all linker script to handle all rodata sections
A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
which needs to be added the the linker script.  Instead of just adding this
one section, we use a wildcard ".rodata*" to get all rodata linker section
gcc has now and might add in the future.

However, '*(.rodata*)' by itself will result in sub-optimal section
ordering.  The sections will be sorted by object file, which causes extra
padding between the unaligned rodata.str.1.1 of one object file and the
aligned rodata of the next object file.  This is easy to fix by using the
SORT_BY_ALIGNMENT command.

This patch has not be tested one most of the boards modified.  Some boards
have a linker script that looks something like this:

*(.text)
. = ALIGN(16);
*(.rodata)
*(.rodata.str1.4)
*(.eh_frame)

I change this to:

*(.text)
. = ALIGN(16);
*(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))

This means the start of rodata will no longer be 16 bytes aligned.
However, the boundary between text and rodata/eh_frame is still aligned to
16 bytes, which is what I think the real purpose of the ALIGN call is.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-03-20 22:39:12 +01:00
Jean-Christophe PLAGNIOL-VILLARD
9751a456f7 davinci: fix implicit declaration of function 'davinci_errata_workarounds'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-22 17:49:43 +01:00
Hugo Villeneuve
0cd18fa982 ARM DaVinci: Add common peripherals and modules enable functions.
Taken all the duplicated code for enabling common modules and apply
software workarounds from the board specific code into common
functions. Also added comments explaining the workarounds
(from TI errata documents) and replaced some numerical bit numbers
with more meaningful defines.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2009-02-22 13:42:25 +01:00
Wolfgang Denk
f15c6515fc Coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-02-12 00:08:39 +01:00
Thomas Abraham
538ef96771 usb : musb : Enabling DM6446 (TI DaVinci) USB module power
Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
controller hook up to USB core layer.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28 19:57:30 +01:00
Thomas Abraham
a9d39ebe91 usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
platform.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-01-28 19:57:30 +01:00
Selvamuthukumar
9b827cf172 Align end of bss by 4 bytes
Most of the bss initialization loop increments 4 bytes
at a time. And the loop end is checked for an 'equal'
condition. Make the bss end address aligned by 4, so
that the loop will end as expected.

Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-11-18 23:13:16 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Hugo Villeneuve
6f099bbac1 ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
This is no longer necessary now that the GD_FLG_RELOC flag is set for
all ARM boards.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-10-13 14:49:17 +02:00
Hugo Villeneuve
89d51d022a ARM DaVinci: Standardize names of directories/files
ARM DaVinci: Standardize names of directories/files.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-30 23:18:55 +02:00
Hugo Villeneuve
264bbdd11d ARM DaVinci: Move common functions to board/davinci/common
ARM DaVinci: Move common functions to board/davinci/common.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-08-30 23:18:54 +02:00
Hugo Villeneuve
85e5808e8e ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
ARM DaVinci: Remove extern phy_t declaration by moving
code to proper place.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-07-14 23:40:55 +02:00
Hugo Villeneuve
3a9e7ba2ac ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
ARM DaVinci: Remove duplicate definitions of MACH_TYPE
and prototype of i2c_init().

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-07-14 23:40:55 +02:00
Hugo Villeneuve
2b1fa9d383 ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
ARM: Fix for incorrect version of patch applied when
adding support for the Lyrtech SFF-SDR board.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
2008-07-10 00:42:59 +02:00
Wolfgang Denk
322ef5e28d Cleanup: remove redundant deleting on *~ files
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-02 23:53:23 +02:00
Wolfgang Denk
c8a3b109f0 Cleanup out-or-tree building for some boards (.depend)
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-02 23:49:18 +02:00