Commit Graph

743 Commits

Author SHA1 Message Date
York Sun
1cb19fbb31 powerpc/T4240EMU: Add T4240EMU target
Add emulator support for T4240. Emulator has limited peripherals and
interfaces. Difference between emulator and T4240QDS includes:
	ECC for DDR is disabled due the procedure to load images
	No board FPGA (QIXIS)
	NOR flash has 32-bit port for higher loading speed
	IFC and I2C timing don't really matter, so set them fast
	No ethernet

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-09 12:41:39 -07:00
Andes
5c440813a7 nds32: Change of NDS32 Custodian
Signed-off-by: Andes <uboot@andestech.com>
Cc: Macpaul Lin <macpaul@gmail.com>
Cc: Kuan-Yu Kuo <ken.kuoky@gmail.com>
2013-08-09 01:50:07 +08:00
Fabio Estevam
f8b1e86d47 mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x
mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the
code duplication and only use the nitrogen6x source code to make board code
maintainance easier.

Tested booting a mainline device tree kernel on a mx6qsabrelite board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-07-26 16:44:29 +02:00
Dirk Eibach
b9944a77f9 mpc85xx: Add gdsys ControlCenter Digital board
The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC.
It boots from SPI-Flash but can be configured to boot from SD-card for
factory programming and testing.
On board peripherals include:
- 2x GbE
- Lattice ECP3 FPGA connected via PCIe
- mSATA RAID1
- USB host
- DisplayPort video output
- Atmel TPM

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-07-16 17:44:30 -05:00
Tom Rini
54e458de55 Revert "MIPS: Jz4740: Add qi_lb60 board support"
The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were
licensed under the GPL v3 or later, and not v2 or later.  As this is
incompatible with the project, revert this board support until the
responsible parties are available to re-license (if so desired) under
GPL v2.

Signed-off-by: Tom Rini <trini@ti.com>
2013-07-15 09:19:39 -04:00
Albert ARIBAUD
e6c7f86f03 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-06-28 17:51:13 +02:00
Fabio Estevam
fca42cd659 MAINTAINERS: Add an entry to the mx6q wandboard variant
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-06-28 16:52:03 +02:00
Pierre Aubert
c174797061 imx: Add support for the SabreSD shipped with i.MX6DL
The SabreSD platform is available with i.MX6Q or i.MX6DL. This patch adds the
support of the i.MX6DL. The config file and the board directory are renamed
to remove the reference to the MX6Q.

Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
CC: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-06-26 17:34:11 +02:00
Mike Dunn
0dc0e846f3 pxa: add support for palmtreo680 board
This patch adds support for the Palm Treo 680 smartphone.  A quick overview of
u-boot implementation on the treo 680...

The treo 680 has a Diskonchip G4 nand flash chip.  This device has a 2k region
that maps to the system bus at the reset vector in a NOR-like fashion so that it
can be used as the boot device.  The phone is shipped with this 2k region
configured as write-protected (can't be modified) and programmed with an initial
program loader (IPL).  At power-up, this IPL loads the contents of two flash
blocks to SDRAM and jumps to it.  The capacity of the two blocks is not large
enough to hold all of u-boot, so a u-boot SPL is used.  To conserve flash space,
these two blocks and the necessary number of subsequent blocks are programmed
with a concatenated spl + u-boot image.  That way, the IPL will also load a
portion of u-boot proper, and when the spl runs, it relocates the portion of
u-boot that the IPL has already loaded, and then resumes loading the remaining
part of u-boot before jumping to it.

The default_environment is used (CONFIG_ENV_IS_NOWHERE) because I didn't think
that having a writable environment was worth the cost of a flash block, although
adding it would be straightforward.  I abuse the CONFIG_EXTRA_ENV_SETTINGS
option to specify the usbtty for the console (CONFIG_SYS_CONSOLE_IS_IN_ENV).

Support for the LCD is included, but currently it is only useful for displaying
the u-boot splash screen.  But if u-boot is built without the usbtty console, it
does display the auto-boot progress nicely.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
2013-06-22 15:25:28 +02:00
Sergey Yanovich
c3442c1e32 arm: pxa: Add support for ICP DAS LP-8x4x
LP-8x4x is a programmable automation controller by ICP DAS. It is
shipped with outdated U-Boot v1.3.0

This patch adds enough supports to boot the board:
 - 128M of 128M SDRAM
 - 32M of 48M NOR Flash memory
 - 1 of 4 Serial consoles (PXA FFUART)
 - 2 of 2 Ethernet controllers (DM9000)

Signed-off-by: Sergey Yanovich <ynvich@gmail.com>
Series-to: u-boot
Series-cc: marex
2013-06-12 22:24:09 +02:00
Lokesh Vutla
cf32b53b97 ARM: DRA7: Add Maintainer
Adding Maintainer for DRA7xx.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-06-10 08:54:46 -04:00
Tom Rini
7f5eef93af arm: Remove OMAP2420H4 and all omap24xx support
The omap2420H4 was the only mainline omap24xx board.  Prior to being
fixed by Jon Hunter in time for v2013.04 it had been functionally broken
for a very long time.  Remove this board as there's not been interest in
it in U-Boot for quite a long time.

Signed-off-by: Tom Rini <trini@ti.com>
2013-06-10 08:43:19 -04:00
Albert ARIBAUD
10e167329b Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts:
	drivers/serial/Makefile
2013-06-08 14:35:10 +02:00
SARTRE Leo
9b75bad0b9 Add support for Congatec Conga-QEVAl board
Add minimal support (only boot from mmc device) for the Congatec
Conga-QEVAl Evaluation Carrier Board with conga-Qmx6q (i.MX6 Quad
processor) module.

Signed-off-by: Leo Sartre <lsartre@adeneo-embedded.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-06-04 12:08:46 +02:00
Alison Wang
8c653124a3 arm: vf610: Add basic support for Vybrid VF610TWR board
VF610TWR is a board based on Vybrid VF610 SoC.

This patch adds basic support for Vybrid VF610TWR board.

Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03 10:56:54 +02:00
Albert ARIBAUD
a19b0dd62d Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	common/cmd_fpga.c
	drivers/usb/host/ohci-at91.c
2013-05-30 14:45:06 +02:00
Suriyan Ramasami
0ad6c34c3e ARM: Add Seagate GoFlex Home support
Add Seagate GoFlex Home support

Start with dockstar configuration
define support for RTC, DATE, SATA and EXT4FS

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
2013-05-23 11:59:17 +02:00
Ryan Harkin
cd4f46e1ef ARM: vexpress: create A5 specific board config
This patch creates a new config for the A5 dual core tile that includes the
generic config for the Versatile Express platform.

The generic config has been modified to provide support for the Extended
Memory Map, as used on the A5 core tile.  A5 does not support the legacy
memory map.

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
2013-05-23 11:22:44 +02:00
Ryan Harkin
9b58a3f606 ARM: vexpress: refactoring of Versatile Express CA9x4 support
The current ca9x4_ct_vxp platform contains support for a Versatile
Express motherboard with a quad core A9 core tile.

This patch separates the Versatile Express motherboard code and the
A9 specific code, to ease supporting more core tiles in the next
patches.

Andre: merged the first two of Ryan's original patches and did some
checkpatch fixes.

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
2013-05-23 11:22:39 +02:00
Bo Shen
3225f34e5c ARM: atmel: add sama5d3xek support
Add sama5d3xek support with following feature
  - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector
  - boot from SPI flash support
  - boot from SD card support
  - LCD support
  - EMAC support
  - USB OHCI support

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-21 11:54:16 +02:00
Simon Glass
8bcb6f43e9 Update MAINTAINERS file for sandbox
This currently has no maintainer listed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-17 17:04:39 -04:00
Simon Glass
3a3994cc42 Update MAINTAINERS file for x86
This still shows the previous maintainer.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-17 17:04:39 -04:00
Wu, Josh
9e33690389 arm: at91: add at91sam9n12ek board support
Add support for following features:
  - nand boot, with PMECC 2bit ECC for 512 bytes sector
  - SPI flash boot
  - SD card boot
  - LCD support

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[fix -Wimplicit-function-declaration for at91_lcd_hw_init()]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-12 16:40:42 +02:00
Albert ARIBAUD
cac423a730 Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' 2013-05-11 22:24:28 +02:00
Igor Grinberg
26528632aa MAINTAINERS: fix the cm-t35 board name
"cm-t35" in U-Boot source code is called "cm_t35".
Make the change "cm-t35" -> "cm_t35" for better greppability.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-05-10 08:25:56 -04:00
Enric Balletbo i Serra
5f5c1d13d3 ARM: Add support for IGEP COM AQUILA/CYGNUS
The IGEP COM AQUILA and CYGNUS are industrial processors modules with
following highlights:

  o AM3352/AM3354 Texas Instruments processor
  o Cortex-A8 ARM CPU
  o 3.3 volts Inputs / Outputs use industrial
  o 256 MB DDR3 SDRAM / 128 Megabytes FLASH
  o MicroSD card reader on-board
  o Ethernet controller on-board
  o JTAG debug connector available
  o Designed for industrial range purposes

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-05-10 08:25:55 -04:00
Marek Vasut
0f83b36529 arm: mx5: Add support for DENX M53EVK
Add basic support for the DENX M53EVK board. Currently supported is:
MMC (incl. booting)
NAND (incl. booting)
Ethernet, I2C, USB, SATA, RTC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
2013-05-05 17:54:44 +02:00
Stefan Roese
b29ca4a158 imx: Add titanium board support (i.MX6 based)
Titanium is a i.MX6 based board from ProjectionDesign / Barco. This
patch adds support for this board with the newly introduced NAND
support for i.MX6.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-22 10:26:40 +02:00
Fabio Estevam
57ca432fb9 mx6sl: Add initial support for mx6slevk board
mx6slevk board is a development board from Freescale based on the mx6 solo-lite
processor.

For details about mx6slevk, please refer to:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&parentCode=i.MX6SL&fpsp=1

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-22 09:58:19 +02:00
Tom Warren
601795462a Tegra: T30: Beaver board support.
Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu.
Add a Beaver build so it can begin to be differentiated, if need be.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-04-15 16:13:51 -07:00
Benoît Thébaudeau
52587f1ef8 arm: Remove support for smdk6400
The migration of boards from Makefile to boards.cfg was due for v2012.03, but
smdk6400 did not follow, and it does not build, so move it to scrapyard. It will
still be possible to restore it from the Git history before fixing it.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-12 07:55:08 +02:00
Albert ARIBAUD
be08abc242 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-04-04 11:49:32 +02:00
Albert ARIBAUD
009d75ccc1 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	drivers/spi/tegra20_sflash.c
	include/fdtdec.h
	lib/fdtdec.c
2013-03-28 18:50:01 +01:00
Veli-Pekka Peltola
417c558031 apx4devkit: change maintainer
As I am no longer working for Bluegiga I will pass apx4devkit maintenance
to Lauri.

Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@iki.fi>
Acked-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
2013-03-27 15:30:11 -04:00
Albert ARIBAUD
412665b461 Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2013-03-26 09:51:09 +01:00
Matt Porter
ea7b96b6aa ti814x_evm: add ti814x evm board support
Add TI814X EVM board directory, config file, and MAINTAINERS
entry. Enable build.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
[trini: Adapt to recent omap_hsmmc requirements, Matt re-tested]
Signed-off-by: Tom Rini <trini@ti.com>
2013-03-24 12:49:12 -04:00
Fabio Estevam
e2d282a1b4 Add initial support for Wandboard dual lite and solo.
Wandboard is a development board that has two variants: one version based
on mx6 dual lite and another one based on mx6 solo.

For more details about Wandboard, please refer to: http://www.wandboard.org/

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-03-20 11:47:37 +01:00
Tom Rini
0ce033d258 Merge branch 'master' of git://git.denx.de/u-boot-arm
Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end.  We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with proper formatting.

Conflicts:
	arch/arm/cpu/ixp/u-boot.lds
	arch/arm/cpu/u-boot.lds
	arch/arm/lib/Makefile
	board/actux1/u-boot.lds
	board/actux2/u-boot.lds
	board/actux3/u-boot.lds
	board/dvlhost/u-boot.lds
	board/freescale/mx31ads/u-boot.lds
	doc/README.scrapyard
	include/configs/tegra-common.h

Build tested for all of ARM and run-time tested on am335x_evm.

Signed-off-by: Tom Rini <trini@ti.com>
2013-03-18 14:37:18 -04:00
Albert ARIBAUD
b27673ccbd Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' 2013-03-15 20:50:43 +01:00
Albert ARIBAUD
6579d15c58 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-03-15 15:18:31 +01:00
Tom Warren
7ea9c506d9 Tegra: Add twarren as maintainer for Tegra30 and Tegra114 SoCs
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-14 11:06:43 -07:00
Eric Nelson
d67b0d97b1 Add Boundary Devices Nitrogen6X boards
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-03-13 09:04:24 +01:00
Rajeshwari Shinde
d4ea072ca6 EXYNOS5: Snow: Add a configuration file
This patch adds the configuration file for Snow Board and
defines the same in boards.cfg.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-12 19:24:24 +09:00
Stefan Roese
7c9e89bd1f ppc: Remove PCIPPC2 and PCIPPC6 boards
These boards seem to be unmaintained for quite some time. So lets
remove support for them completely. This also cleans up some
common drivers/files.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch>
Acked-by: Wolfgang Denk <wd@denx.de>
2013-03-11 17:00:28 -04:00
Tom Rini
76b40ab41e Merge u-boot/master into u-boot-ti/master
In master we had already taken a patch to fix the davinci GPIO code for
CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support
DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850).  Resolve these
conflicts manually and comment the #else/#endif lines for clarity.

Conflicts:
	arch/arm/include/asm/arch-davinci/gpio.h
	drivers/gpio/da8xx_gpio.c

Signed-off-by: Tom Rini <trini@ti.com>
2013-03-11 12:16:13 -04:00
Anatolij Gustschin
fcc7fe4251 mpc512x: add ifm ac14xx board
Add new mpc5121e based ac14xx board and a new pinmux config
function for setting individual pinmux bit groups. This
function is used in ac14xx board code.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-03-09 08:22:57 +01:00
Stefan Roese
d4451d3503 mpc5200: Add a4m2k board port
This patch adds the a4m2k MPC5200B board port. Its a derivate of
the a3m071 board with only minor changes.

Additionally this patch includes some clean-up changes:
- Remove I2C support from a3m071 as its unused
- Fix/enhance default env variables
- Fix some comments
- Add newly introduced CONFIG_SPL_TARGET to automatically build
  "u-boot-img.bin"
- Fix dtb patching in READ desciption for SPL Linux booting:
  "fdt chosen" needs to get called to patch/create the chosen node.
- Add missing call to spl_board_init():
  Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get
  called in the SPL version.

Signed-off-by: Stefan Roese <sr@denx.de>
2013-03-09 08:17:51 +01:00
Sonic Zhang
320ec9dfb7 blackfin: bf60x: add board and headers files to support bf609
Board and config header files for bf609-ezkit support.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
2013-03-04 13:42:07 +08:00
Enric Balletbo i Serra
d9aacf4190 OMAP3: igep00x0: Add new IGEP COM PROTON.
The IGEP COM PROTON is a new ultra compact module design with an
on-board ethernet controller.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-02-18 13:51:19 -05:00
Tom Rini
951c6baaf4 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-02-12 10:18:31 -05:00
Lars Poeschel
1c1b7c3739 pcm051: Add support for Phytec phyCORE-AM335x
The board is named pcm051 and has this hardware:
SOC: TI AM3359
DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB
ETH 1: LAN8710AI
SPI-Flash: W25Q64BVSSIG
RTC: RV-4162-C7
I2C-EEPROM: CAT32WC32
NAND: MT29F4G08_VFPGA63
PMIC: TPS65910A3
LCD

Supported:
UART 1
MMC/SD
ETH 1
USB
I2C
SPI

Not yet supported:
NAND
RTC
LCD

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
[trini: Add #define CONFIG_PHY_ADDR 0 to config]
Signed-off-by: Tom Rini <trini@ti.com>
2013-02-07 10:36:26 -05:00
Prabhakar Kushwaha
41d910118c powerpc/85xx: Add BSC9132QDS support
BSC9132QDS is a Freescale reference design board for BSC9132 SoC.
BSC9132 SOC is an integrated device that targets the evolving Microcell,
Picocell, and Enterprise-Femto base station market subsegments.
It combines Power Architecture e500v2 and DSP StarCore SC3850 core
technologies with MAPLE-B2F baseband acceleration processing elements.

BSC9132QDS Overview
 --------------------
  2Gbyte DDR3 (on board DDR), Dual Ranki
  32Mbyte 16bit NOR flash
  128Mbyte 2K page size NAND Flash
  256 Kbit M24256 I2C EEPROM
  128 Mbit SPI Flash memory
  SD slot
  USB-ULPI
  eTSEC1: Connected to SGMII PHY
  eTSEC2: Connected to SGMII PHY
  PCIe
  CPRI
  SerDes
  I2C RTC
  DUART interface: supports one UARTs up to 115200 bps for console display

Apart from the above it also consists various peripherals to support DSP
functionalities.

This patch adds support for mainly Power side functionalities and peripherals

Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-30 11:25:14 -06:00
Otavio Salvador
81ca840976 mx23evk: Add initial board support
The following features are supported:
 * 128 MB DDR1 SDRAM
 * DUART
 * SD/MMC Card Socket

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-28 11:51:04 +01:00
Marek Vasut
64a9386080 mxs: Add MX23 olinuxino board support
This patch adds support for MX23-based Olinuxino board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-01-21 12:05:22 +01:00
Tom Rini
da77a0e593 Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-12-22 05:55:19 -07:00
Yoshihiro Shimoda
1a2621bab8 sh: add support for sh7752evb board
The R0P7752C00000RZ board has SH7752, 512MB DDR3-SDRAM, SPI ROM,
Gigabit Ethernet, and eMMC.

This patch supports the following functions:
 - 512MB DDR3-SDRAM, SCIF4, SPI ROM, Gigabit Ethernet, eMMC

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-12-20 13:20:17 +09:00
Minkyu Kang
2c601c7208 Merge branch 'master' of git://git.denx.de/u-boot into resolve
Conflicts:
	README
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h
2012-12-10 14:13:27 +09:00
Luka Perkov
3fdf7596df Change e-mail address of Luka Perkov
Change e-mail address of Luka Perkov.

Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Luka Perkov <uboot@lukaperkov.net>
2012-12-07 08:47:52 -07:00
Robert P. J. Day
fcdde04c20 MAINTAINERS: Add a pointer to the custodians page.
Since there's no obvious mention, add a brief reference to the
custodians page at www.denx.de

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2012-12-07 08:47:51 -07:00
Stefan Roese
13b4f63949 mpc5200: Add a3m071 board support
This patch adds support for the a3m071 board based on the
MPC5200.

Signed-off-by: Stefan Roese <sr@denx.de>
2012-12-05 17:31:23 +01:00
Stefano Babic
3e4d27b06d Merge git://git.denx.de/u-boot 2012-11-10 08:05:54 +01:00
Tom Rini
6acc7c3cbc Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-11-05 07:42:00 -07:00
Albert ARIBAUD
a42c87f9d8 Merge remote-tracking branch 'u-boot-ti/master' 2012-11-03 10:05:22 +01:00
Raphael Assenat
843a7ee8c4 eco5pk: Add new board and default config
Signed-off-by: Raphael Assenat <raph@8d.com>
[trini: Squash boards.cfg / MAINTAINERS change into main patch]
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-30 15:28:06 -07:00
Pali Rohár
ed407be53e New board support: Nokia RX-51 aka N900
Based on previous work by: Alistair Buxton <a.j.buxton@gmail.com>

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Ивайло Димитров <freemangordon@abv.bg>
2012-10-30 15:28:06 -07:00
Lucas Stach
6bbda88384 tegra: add Colibri T20 board support
This adds board support for the Toradex Colibri T20 module.

Working functions:
- SD card boot
- USB boot
- Network
- NAND environment

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-29 09:07:04 -07:00
Wolfgang Denk
1b0757eced PPC: remove dead boards (AMX860, c2mon, ETX094, IAD210, LANTEC, SCM)
These boards have long reached EOL, and there has been no indication
of any active users of such hardware for years.  Get rid of the dead
weight.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Grandegger <wg@denx.de>
2012-10-28 20:17:25 +01:00
Stefano Babic
d81b27a245 MX35: add support for woodburn board
The woodburn board is based on the MX35 SOC.
Support for both external (NOR) and internal
(SD Card) boot mode are added. It uses the
generic SPL framework to implement the internal boot
mode.

The following peripherals are supported:
- Ethernet (FEC)
- SD Card
- NAND (512 MB)
- NOR Flash

In the internal boot mode, a simple imximage header
is generated to set the address in internal RAM
where the SOC must copy the SPL code. The initial setup
is then demanded to the SPL itself.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-10-26 16:27:59 +02:00
Tom Rini
99070db0dc Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	drivers/serial/serial_lh7a40x.c

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 18:23:38 -07:00
Paul Gortmaker
12c79a9578 powerpc: delete Wind River SBC8560/8540 support
The sbc8548/60 (both similar, just variations in UART hardware)
support has been removed from the linux kernel as of v3.6-rc1~132
so lets also now remove it from the u-boot tree as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-10-17 09:39:16 -07:00
Łukasz Dałek
34cda7a0d8 h2200: Add support for iPAQ h2200 palmtop
Add basic support for HP iPAQ h2200 palmtop. h2200 palmtop was targeted
to general consumers. It has 64 MB of RAM, 32 MB flash. No intergrated
Wi-Fi nor Ethernet. Based on Intel PXA255 processor. It was shipped with
Windows CE 4.2 operating system.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-16 07:14:55 +02:00
Fabio Estevam
7dd6545da7 mx6q: Add basic support for mx6qsabreauto
mx6qsabreauto is a board based on mx6q SoC with the following features:
- 2GB of DDR3
- 2 USB ports
- 1 HDMI output port
- SPI NOR
- 2 LVDS LCD ports
- Gigabit Ethernet
- Camera
- eMMC and SD card slot
- Multichannel Audio
- CAN
- SATA
- NAND
- PCIE
- Video Input

Add very basic support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:09 -07:00
Fabio Estevam
7891e258d4 mx6: Add basic support for mx6qsabresd board.
mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- Audio

Add very basic support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:08 -07:00
Thierry Reding
66b796a560 tegra: Rename Medcom to Medcom-Wide
Medcom is the marketing name for an older, PXA-based version of the same
device. In order to avoid confusion, rename the Tegra-based version to
the new marketing name.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Stefan Roese
dee9c534db ppc4xx: Remove ML2 board support
As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Peter De Schrijver <p2@mind.be>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-15 11:53:59 -07:00
Stefan Roese
99bcad1809 ppc4xx: Remove IOP480 support
Since the IOP480 (PPC401/3 variant from PLX) is only used on 2
boards that are not actively maintained, lets remove support
for it completely. This way the ppc4xx code will get a bit cleaner.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-15 11:53:59 -07:00
Tom Rini
c26420bbb5 MAINTAINERS: Move dbau1x00 to orphaned.
The former maintainer is no longer interested, move to orphaned.  Patch
is from the former maintainer.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:47 -07:00
Tom Rini
61c0d6ae77 gth2: Remove this platform
After taking with the former maintainer, delete this platform.  The
patch is from the former maintainer.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:46 -07:00
Tom Rini
89e76b5f86 Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-10-05 13:56:45 -07:00
Tetsuyuki Kobayashi
99a9f41a3e MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-05 21:22:49 +02:00
Wolfgang Denk
d923a5d59f MPC85xx: remove support for TQM85xx boards
Due to grown code sizes the TQM85xx boards don't build any more with
some older tool chains (like ELDK 4.2).  As these boards have long
reached EOL it seems a waste of effort trying to fix them.  The vendor
has agreed to drop support for them, too.  So let's get rid of them.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
cc: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Stefan Roese <sr@denx.de>
2012-10-05 11:07:42 -07:00
Tom Rini
1981668777 Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-10-04 10:00:42 -07:00
Dinh Nguyen
777544085d ARM: Add Altera SOCFPGA Cyclone5
Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Chin Liang See <clsee@altera.com>
Signed-off-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tom Trini <trini@ti.com>
Cc: Wolfgang Denx <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefan Roese <sr@denx.de>
----
v8: Remove no_return attribute for reset_cpu

Based on v2012.10-rc2
2012-10-04 18:11:52 +02:00
Michal Simek
f22651cfc4 xilinx: Add new Zynq board
Add support for Xilinx Zynq board.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Marek Vasut <marex@denx.de>
CC: Joe Hershberger <joe.hershberger@gmail.com>
2012-10-04 16:57:36 +02:00
Stefan Roese
995b72ddda ARM: Add X600 board support (SPEAr600 based)
This patch adds support for the X600 SPEAr600 based board. Its also
the first SPEAr600 board that uses the newly introduced SPEAr600
SPL support. Xloader is not necessary any more. By using the new
"u-boot.spr" make target, one image will generated containing both,
U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and
the main U-Boot with mkimage header.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>
2012-10-04 10:18:32 +02:00
Albert ARIBAUD
386c6cb10d Merge remote-tracking branch 'u-boot-marvell/master' 2012-10-03 16:44:29 +02:00
Luka Perkov
9b914727ce kirkwood: add support for Iomega iConnect board
Add support for new board iConnect from Iomega.

More information about the device can be found here:

http://go.iomega.com/en/products/network-storage-desktop/wireless-data-station/network-hard-drive-iconnect/?partner=4735

Signed-off-by: Luka Perkov <uboot@lukaperkov.net>
Tested-by: Wojciech Dubowik <wojciech.dubowik@neratec.com>
Tested-by: Tim Fletcher <tim@night-shade.org.uk>
2012-10-03 16:43:13 +05:30
Gabriel Huau
b77026225a ARM : Add support for MINI2440 (s3c2440).
Support of the MINI2440 board from FriendlyARM from
an old version of u-boot :
http://repo.or.cz/r/u-boot-openmoko/mini2440.git

Currently, supporting only boot from NOR.

Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
2012-10-03 10:50:27 +02:00
Hideyuki Sano
1a31ca4a78 arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board
The Armadillo-800EVA board has Renesas R-Mobile R8A7740, 512MB DDR3-SDRAM,
Ethernet, and more.

This patch supports the following functions:
 - 512MB DDR3-SDRAM
 - Serial console (SCIF)
 - Ethernet MAC(MII) & PHY(SMSC)

Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03 02:04:25 +02:00
Nobuhiro Iwamatsu
8d811ca36a arm: rmobile: Add supoprt for KMC KZM-A9-GT board
The KZM-A9-GT board has Renesas R-Mobile SH73A0, 512MB DDR2-SDRAM,
USB, Ethernet, and more.

This patch supports the following functions:
	- 512MB DDR2-SDRAM
	- 16MB NOR Flash memory
	- Serial console (SCIF)
	- Ethernet (SMSC)
	- I2C

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03 02:04:22 +02:00
Chan-Taek Park
d5670b39fb TNETV107X: Change tnetv107x_evm maintainer 2012-10-02 11:55:46 -07:00
Łukasz Majewski
54782c0107 MAINTAINERS: New maintainer for Samsung's Trats development board.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-02 11:55:45 -07:00
Marek Vasut
535c74f80c ARM: Remove apollon board
This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. The board can
be revived if necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tom Rini <trini@ti.com>
2012-09-18 12:01:51 -07:00
Andreas Bießmann
a420dfe2b0 avr32: add atngw100mkii board
This patch is derived from an older patch provided by atmel in its
buildroot-avr32-v3.0.0.tar.bz2

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2012-09-13 13:33:11 +02:00
Bo Shen
24699e86c8 Take over the maintainer for sam9g10 and sam9m10g45
As the maintainer for at91sam9g10ek and at91sam9m10g45ek can not reach
any more.

So I wish to take over the maintainer for sam9g10 and sam9m10g45

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 17:06:14 +02:00
Matt Sealey
497dc79658 efikamx: update MAINTAINERS for Genesi Efika MX systems
Update maintainer for "efikamx" and "efikasb" to myself.

Signed-off-by: Matt Sealey <matt@genesi-usa.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
2012-09-01 14:58:30 +02:00
Allen Martin
00a2749d7b tegra20: rename tegra2 -> tegra20
This is make naming consistent with the kernel and devicetree and in
preparation of pulling out the common tegra20 code.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-09-01 14:58:21 +02:00
Stephen Warren
0d04f34a35 ARM: add Raspberry Pi model B board, using BCM2835 SoC
The Raspberry Pi model B uses the BCM2835 SoC, has 256MB of RAM,
contains an SMSC 9512 USB LAN/Hub chip, and various IO connectors.
For more details, see http://www.raspberrypi.org/.

Various portions (cache enable, MACH_TYPE setup, RAM size limit, stack
relocation to top of RAM) extracted from work by:
Oleksandr Tymoshenko <gonzo@bluezbox.com>.

GPIO driver enablement by Vikram Narayanan <vikram186@gmail.com>.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Tom Rini <trini@ti.com>
2012-09-01 14:58:21 +02:00
Mathieu J. Poirier
84dee301c3 snowball: Add support for ux500 based snowball board
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Conflicts:

	drivers/gpio/Makefile
2012-09-01 14:58:19 +02:00
Marek Vasut
4e3349b67e MX28: Add SchulerControl SC_SPS_1 platform
This i.MX28 platform supports the following:
* 2x FEC ethernet
* USB on USBH0
* I2C EEPROM
* SPI NVRAM
* LEDs

Signed-off-by: Marek Vasut <marex@denx.de>
2012-09-01 14:58:18 +02:00